Magnetic Solid Phase Extraction as a Promising Technique for Fast Separation of Metallic Nanoparticles and Their Ionic Species: A Review of Recent Advances

Appreciatively Efficient Sorption Achievement to U(VI) from the El Sela Area by ZrO2/Chitosan

The need to get uranium out of leaching liquid is pushing scientists to come up with new sorbents. This study uses the wet technique to improve the U(VI) sorption properties of ZrO2/chitosan composite sorbent. To validate the synthesis of ZrO2/CS composite with Zirconyl-OH, -NH, and -NH2 for U(VI) binding, XRD, FTIR, SEM, EDX, and BET are used to describe the ZrO2/chitosan wholly formed. To get El Sela leaching liquid, it used 150 g/L H2SO4, 1:4 S:L ratio, 200 rpm agitation speed, four hours of leaching period, and particle size 149–100 µm. In a batch study, the sorption parameters are evaluated at pH 3.5, 50 min of sorbing time, 50 mL of leaching liquid (200 mg/L U(VI)), and 25 °C. The sorption capability is 175 mg/g. Reusing ZrO2/CS for seven cycles with a slight drop in performance is highly efficient, with U(VI) desorption using 0.8 M acid and 75 min of desorption time. The selective U(VI) recovery from El Sela leachate was made possible using ZrO2/CS. Sodium diuranate was precipitated and yielded a yellow cake with a purity level of 94.88%.

Preconcentration and Separation of Gold Nanoparticles from Environmental Waters Using Extraction Techniques Followed by Spectrometric Quantification

The quantification of gold nanoparticles (AuNP) in environmental samples at ultratrace concentrations can be accurately performed by sophisticated and pricey analytical methods. This paper aims to challenge the analytical potential and advantages of cheaper and equally reliable alternatives that couple the well-established extraction procedures with common spectrometric methods. We discuss several combinations of techniques that are suitable for separation/preconcentration and quantification of AuNP in complex and challenging aqueous matrices, such as tap, river, lake, brook, mineral, and sea waters, as well as wastewaters. Cloud point extraction (CPE) has been successfully combined with electrothermal atomic absorption spectrometry (ETAAS), inductively coupled plasma mass spectrometry (ICP-MS), chemiluminescence (CL), and total reflection X-ray fluorescence spectrometry (TXRF). The major advantage of this approach is the ability to quantify AuNP of different sizes and coatings in a sample with a volume in the order of milliliters. Small volumes of sample (5 mL), dispersive solvent (50 µL), and extraction agent (70 µL) were reported also for surfactant-assisted dispersive liquid–liquid microextraction (SA-DLLME) coupled with electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS). The limits of detection (LOD) achieved using different combinations of methods as well as enrichment factors (EF) varied greatly, being 0.004–200 ng L−1 and 8–250, respectively.

An ion imprinted magnetic organosilica nanocomposite for the selective determination of traces of Cd(II) in a minicolumn flow-through preconcentration system coupled with graphite furnace atomic absorption spectroscopy

In this paper we present the determination of ultratraces of cadmium ions in water by means of a minicolumn (MC) flow-through preconcentration system coupled with graphite furnace atomic absorption spectrometry. The core of the system is a lab-made ion imprinted magnetic organosilica nanocomposite which is employed as filler of the MC for the selective retention of the analyte. In this case superparamagnetic magnetite nanoparticles were coated with an amine-functionalized shell and ion imprinted with Cd(II) by a simple sol-gel co-condensation method. The setup was completed with the inclusion of a magnet fixed around the packed MC. This assembly - which is studied with an MII material for the first time here - allowed a homogeneous distribution of the solid on the walls of the MC, leaving a hole in the center and enabling the absence of material bleeding or obstructions to the free movement of fluids. Ion imprinted (MII) and non-imprinted (MNI) materials were studied for comparison purposes. Both were characterized and compared by DRX, FTIR, and SEM and their magnetic behavior by magnetization curves. Batch experiments showed an equilibration time of less than 10 minutes and a maximum adsorption pH of around 7 for both solids. The maximum capacity for MII was greater than that of MNI (200 mg g^-1 and 30 mg g^-1 respectively) and thus, the former was chosen for analytical purposes. Under MC dynamic conditions, sample and elution flow rates, volumes of the sample and eluant, and type and concentration of the most suitable eluant have been thoroughly investigated and optimized. Under the optimal experimental conditions, the MII filler showed a preconcentration factor of 200, a limit of detection of 0.64 ng L^-1, a linear range of 2.5-100 ng L^-1, RSD% of 1.9 (n = 6; 10 ng L^-1) and a lifetime of more than 800 cycles of concentration-elution with no loss of sensitivity or need for refilling. The effect of potentially interfering ions on the percent recovery of cadmium was also studied. The proposed method was successfully applied to the determination of traces of Cd(II) in osmosis and tap water with recoveries of 98.0-101.3%. A comparison with similar methods is also provided.

Magnetic Nanomaterials and Nanostructures in Sample Preparation Prior to Liquid Chromatography

Magnetic nanomaterials and nanostructures compose an innovative subject in sample preparation. Most of them are designed according to the properties of the target analytes on each occasion. The unique characteristics of nanomaterials enhance the proficiency at extracting and enriching due to their selective adsorption ability as well as easy separation and surface modification. Their remarkable properties, such as superparamagnetism, biocompatibility and selectivity have established magnetic materials as very reliable options in sample preparation approaches. In order to comprehend the range of utilization at magnetic materials and nanostructures, this review aims to present the most notable examples in sample preparation prior to liquid chromatography (LC) to the community of analytical chemists. Primarily, the review describes the principles of the techniques in which the magnetic materials are utilized and leaned on. Additionally, there is a diligent report about the novel magnetic techniques and finally a comparison to demonstrate the total point of view.

The untapped potential of magnetic nanoparticles for forensic investigations: A comprehensive review

With a growing interest in precise and sensitive diagnosis for criminal investigations, nanoparticles (NPs) have intrigued scientific minds working in the field of forensic science due to their exceptional properties. Magnetic nanoparticles (MNPs) have emerged as a powerful tool for improving forensic analysis due to their super magnetic behavior combined with smaller dimensions. MNP-based applications can benefit criminologists to solve criminal mysteries with greater precision and pace. This review highlights the different types of MNP-based applications and their developmental and implicational aspects of forensic science. It also renders insight into the future prospects of a splendid blend of nanotechnology and forensic science, leading to a better scientific analysis.

[Advances in solid-phase extraction for bisphenols in environmental samples]

Owing to the strict restrictions on the production and use of bisphenol A (BPA), bisphenol analogs (e. g., bisphenol S and bisphenol F) are gradually coming to use in many fields. BPA and these bisphenol analogs are so-called bisphenols (BPs). BPs as a class of endocrine disrupters are widely distributed in the environment (water, sediments, sludge, and aquatic products). BPs enter the human body through various routes, leading to endocrine disruption, cytotoxicity, genotoxicity, reproductive toxicity, dioxin-like effects, and neurotoxicity. The Canadian government has identified BPs as substances for further scoping/problem formulation. Because of the widespread attention paid to BPs in the environmental field, research is being expanded to cover water, sediment, dust, and biological samples, and other media. Given the significant differences in the complexity and pollution concentration of environmental samples, the development of pretreatment methods that afford high extraction efficiency, good purification selectivity, strong universality, operational simplicity, and high-throughput extraction and purification, are necessary to realize the highly sensitive detection of BPs in environmental media. In recent years, solid-phase extraction (SPE), accelerated solvent extraction (ASE), microwave-assisted extraction (MAE), and dispersion liquid-liquid-microextraction (DLLME) as new pretreatment technologies have gradually replaced the traditional liquid-liquid extraction and Soxhlet extraction. SPE has seen rapid development for the extraction and purification of BPs in various environmental samples, overcoming the bottlenecks related to time, energy, and solvent consumption in traditional methods while extending technical support for the analysis of emerging pollutants. The physicochemical properties, usage, and environmental hazards of typical BPs were briefly reviewed, with emphasis on the application of SPE products, development of new adsorbents, and transformation of the SPE mode. Commercialized SPE products are universally applicable in the field of environmental monitoring, while products suitable for the pretreatment of BPs are limited. The development of new adsorbents mainly focused on their adsorption capacity and selectivity. For example, ordered mesoporous silicon, carbon nanomaterials, metal-organic frameworks, and cyclodextrins have large surface areas, good adsorption performance, and regular pore structures, which improve the adsorption capacity of BPs. Molecularly imprinted polymers (MIPs) and mixed-mode ion-exchange polymers are mainly used to improve the selectivity of BPs in the purification process. In addition, MIPs have high chemical, mechanical, and thermal stabilities, which ensures their widespread application in the extraction, preconcentration, and separation of BPs. A variety of new SPE adsorbents can partially meet the diverse needs for detection. There is a consensus that the current challenges in analytical chemistry include the determination of contaminants at low concentration levels, but at the same time, more efficient and environment-friendly methodologies are required. With the introduction of high-sensitivity instruments in the market, the SPE model is seeing gradual development in terms of miniaturization, automation, and simplification. This in turn has minimized solvent consumption, analysis time, and labor cost, resulting in more efficient and affordable analytical methods such as QuEChERS, solid-phase microextraction (SPME), and magnetic solid-phase extraction (MSPE) to adapt to the new development scenario.

Application of Metallic Nanoparticles and Their Hybrids as Innovative Sorbents for Separation and Pre-concentration of Trace Elements by Dispersive Micro-Solid Phase Extraction: A Minireview

It is indisputable that separation techniques have found their rightful place in current analytical chemistry, considering the growing complexity of analyzed samples and (ultra)trace concentration levels of many studied analytes. Among separation techniques, extraction is one of the most popular ones due to its efficiency, simplicity, low cost and short processing times. Nonetheless, research interests are directed toward the enhancement of performance of these procedures in terms of selectivity. Dispersive solid phase extraction (DSPE) represents a novel alternative to conventional solid phase extraction (SPE) which not only delivers environment-friendly extraction with less solvent consumption, but also significantly improves analytical figures of merit. A miniaturized modification of DSPE, known as dispersive micro-solid phase extraction (DMSPE), is one of the most recent trends and can be applied for the extraction of wide variety of analytes from various liquid matrices. While DSPE procedures generally use sorbents of different origin and sizes, in DMSPE predominantly nanostructured materials are required. The aim of this paper is to provide an overview of recently published original papers on DMSPE procedures in which metallic nanoparticles and hybrid materials containing metallic particles along with other (often carbon-based) constituent(s) at the nanometer level have been utilized for separation and pre-concentration of (ultra)trace elements in liquid samples. The studies included in this review emphasize the great analytical potential of procedures producing reliable results in the analysis of complex liquid matrices, where the detection of target analyte is often complicated by the presence of interfering substances.

Magnetic solid phase extraction of silver-based nanoparticles in aqueous samples: Influence of particle composition and matrix effects on its application to environmental samples and species-selective elution and determination of silver sulphide nanoparticles with sp-ICP-MS

Silver-based nanoparticles (Ag-b-NPs) are currently a cause for concern because they are being produced in increasing quantities for use in industrial goods and consumer products. This goes hand in hand with their release to the environment and the resultant risks for the entire ecosystem. Therefore, it is essential that these materials are monitored. A promising technique that overcomes a number of shortcomings in handling environmental samples is magnetic solid phase extraction (MSPE) of Ag-b-NPs, which is applied in this study. It has been possible to extract different kinds of Ag-b-NPs at environmentally relevant concentrations in the low ng L^-1 range using iron oxide magnetic particles (IOMPs) of different size and shape with efficiencies in the range from 80 to 100%. Furthermore, environmentally relevant inorganic ions and TiO₂ particles exhibited no major effect on the extraction efficiency. However, natural organic matter (NOM) exhibited a significant influence from 1 mg L^-1 resulting in a 50% drop in extraction efficiency. This effect could be overcome by adding 10 mM Ca²⁺ or increasing the iron oxide magnetic particle (IOMP) concentration to 500 mg L^-1. Applying the presented procedure, Ag-b-NPs added to a river water sample at β_Ag = 50 ng L^-1 were successfully extracted. We also investigated the coextraction of Ag⁺, demonstrating that NOM could eliminate coextraction. The subsequent species-selective elution of Ag₂S-NPs after MSPE, was carried out based on ethylene diamine tetraacetate (EDTA) as eluent in different matrices. A desorption efficiency of 76 ± 6% could be achieved while preserving the Ag₂S-NPs' size. By contrast, core Ag-NPs and AgCl-NPs are dissolved if the presented method is followed.