Awareness and Treatment Decisions on Tooth Wear among Jordanian Dentists and Prosthodontists: A Cross-Sectional Survey Study

Differential Stability of One-layer and Three-layer Orthodontic Aligner Blends under Thermocycling: Implications for Clinical Durability

Objectives

To optimize the therapeutic usefulness of aligners, it is crucial to understand how their mechanical properties alter with time.

Materials and methods

Specimens from four different brands, including Duran+, CA® Pro, Zendura A, and Zendura FLX, were produced for material testing of thermoplastic orthodontic aligners (TOA) using dimensions measuring 4mm x 10mm. Each brand's 24 samples were split into three groups as follows: G1 being thermoformed, G2 being thermoformed and underwent 500 thermocycles (simulating 7 days), and G3 being thermoformed and underwent 1000 thermocycles (simulating 14 days). Surface roughness, modulus of elasticity in bending, and spectrophotometry were used to assess the effect of aging on TOAs.

Results

After 1000 thermocycles, Duran+ had the highest modulus of elasticity and differed statistically from all other groups. The intragroup comparison showed that only Duran+'s elastic modulus significantly changed after 1000 thermocycles in comparison with the control group. Surface roughness values (Ra), did not statistically differ among brands or thermocycling group measures. The change in chemical properties was not significant in any brand.

Conclusion

One-layer PETG (Duran+) failed to demonstrate stability after in vitro aging, thus suggesting that clinicians should be aware of the change in mechanical properties when using one-layer PETG (Duran +) in a 2 weeks regime.

Knowledge, Awareness, and Practice of Gingival Veneer Prosthesis Among Dental Students, Interns, and Practitioners in the Riyadh Region: A Cross-Sectional Questionnaire-Based Survey

Background:

The treatment modality of using gingival veneer prosthesis for anterior gingival recession is not widely known even in the dental fraternity. This survey has been conducted considering its essential nature and absence of data on its awareness in the Riyadh region.

Aims:

The aim of the study was to assess the knowledge, awareness, and practice of gingival veneer prosthesis among dental students, interns, and practitioners in the Riyadh region.

Materials and Methods:

A descriptive cross-sectional electronic survey was conducted on dental students, interns, and practitioners of both genders in Saudi Arabia, using a convenient sampling method. The final questionnaire consisted of 12 questions. The percentage of various responses, with reference to the demographics, and statistical significance, were tested by independent sample t-test and p-value <0.05. The responses/data of 446 participants were tabulated and processed in SPSS (version 21.0).

Results:

The preferred treatment option for an anterior gingival recession proposed by prosthodontists was prosthetic correction (p<0.05), and for other groups, it was periodontal surgery (p<0.05). 66% of general practitioners’ group and 56% of dental students and interns’ group, respectively, were not sure about the ideal treatment option for Miller’s class III & IV gingival defects, while 70% of general practitioners’ group and 65% of the students and interns’ group, respectively, were not sure about the ideal treatment option for the management of gingival tissue loss between implants,.

Conclusion:

There is a significant lack of knowledge on using gingival veneer prosthesis as a treatment option for anterior gingival defects among general dental practitioners, interns, and dental students (p˂0.05).

Dynamic mechanical and thermal properties of clear aligners after thermoforming and aging

Background

Based on the role of properties of aligner materials on their efficiency, we aimed to assess their thermomechanical properties after thermoforming and simulated aging.

Methods

In this experimental study, 96 samples of polyethylene terephthalate glycol (PETG) aligners (Duran and Erkodur) were prepared and divided to three groups: control (C), after thermoforming (T), after thermoforming and aging (TA). Thermoforming was done through 3D-printed molds, and aging was exerted by 200 thermal cycles after immersion in 37°C distilled water for 24h. Flexural modulus, hardness, glass transition temperature (Tg), elastic and viscous modulus, and loss factor were evaluated. Two-way ANOVA, T-independent, and Tukey HSD tests were done for statistical analysis and significance level was set to 0.05.

Results

In both materials, flexural modulus decreased significantly after thermoforming, 88% in Duran and 70% in Erkodur, but did not change significantly after aging. After thermoforming, hardness decreased significantly in both materials (22% in Duran and 7.6% in Erkodur). Dynamic Tg was significantly lower in T and TA in both materials. At all temperatures (25, 37, 55°C) in Duran, the elastic modulus difference was only significant between C and TA, but in Erkodur, it decreased significantly in T, and there was no significant change after aging. Viscous modulus and loss factor showed the same change patterns at all temperatures. In both materials, they increased after thermoforming, but did not change significantly after aging.

Conclusion

Thermoforming had more prominent role than aging in diminishing of thermomechanical properties. In general, Duran had greater thermomechanical stability than Erkodur.

Evaluating the Mechanical Properties of Zinc-Coated Stainless Steel Orthodontic Wires Using Physical Vapor Deposition

The aim of this study was to evaluate the mechanical properties of stainless steel (SS) orthodontic wires coated with zinc (Zn), using a Physical Vapored Deposition (PVD) machine. A total of 100 straight SS orthodontic wires were cut into pieces of 5 centimeters in length and were divided into two groups. Half of the wires were coated with Zn using a PVD machine, and the others remained uncoated. Tensile strength (n = 15), three-point bending (n = 15), and frictional resistance at 0° (n = 10) and 10° (n = 10) were measured to compare the mechanical properties of the Zn-coated and uncoated orthodontic wires using the universal testing machine. The surface of the coated wires was observed by SEM and AFM. An independent t-test, multivariate ANOVA, and measurement ANOVA were used for data analysis. SEM and AFM showed a homogenous Zn layer of 0.28 ± 0.006 µm on the SS wires. The tensile strength and three-point bending strength significantly increased after Zn coating of wires with the PVD method (P < 0.05). The friction resistance significantly reduced at both angulations following the coating procedure. The angle between the wire and bracket had no significant effect on the frictional resistance (P > 0.05). Coating with Zn improved the tensile and load-bending strength of SS orthodontic wires and reduced their frictional resistance which might be advantageous in terms of reducing the risk of root resorption during the orthodontic treatment.