Determination of Organochlorine Pesticides in Green Leafy Vegetable Samples via Fe3O4 Magnetic Nanoparticles Modified QuEChERS Integrated to Dispersive Liquid-Liquid Microextraction Coupled with Gas Chromatography-Mass Spectrometry

A fungal hyphae-derived biomass carbon for magnetic solid-phase extraction of the organochlorine pesticides in water samples, tea beverages, and Chinese traditional medicines before gas chromatography-tandem mass spectrometry determination

A magnetic biochar nanomaterial derived from fungal hyphae was introduced into the sample preparation field. The magnetic fungal hyphae-derived biomass carbon (MFHBC) could be produced by a controllable hydrothermal method. In order to obtain the best sorbent for magnetic solid-phase extraction (MSPE), the reaction conditions containing temperature, time and the consumption of fungal hyphae were investigated. A series of MFHBC materials were characterized by vibrating sample magnetometers, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and transmission electron microscopy. A material with a satisfactory saturation magnetization (21.58 emu g-1) and largest surface area (88.06 m2 g-1) was selected as the sorbent to extract ten typical organochlorine pesticides (OCPs). The extraction conditions were optimized as 20 mL of sample solution with 70 mg of sorbent and 2.0 g of NaCl oscillated at 50 °C for 5.0 min. And the optimum desorption was performed by oscillating sorbent in 1.0 mL acetonitrile for 5.0 min. Then, the MFHBC-based MSPE-GC-MS/MS methods were established for different samples including water samples, tea beverages, and Chinese traditional medicines. The linearities were 10-2500 ng L-1 or 100-25,000 ng kg-1, and the limits of detection were 0.3-13.9 ng L-1 for water sample, 0.1-9.7 ng L-1 for tea beverage samples, 0.1-21.4 ng L-1 for Shenqi Fuzheng injection samples, and 7.2-278.3 ng kg-1 for Astragali Radix decoction pieces. Except for satisfactory repeatability (RSDs ≤13.8%) in intra-day and inter-day tests (n = 3), the reproducibility (RSDs ≤13.5%, n = 3) of MFHBC was acceptable. The methods were applied in the determination of OCPs from above real samples, with the recoveries of 80.5-117.2% and the RSDs (n = 3) <8.9%. The methods were suitable in the sensitive determination of OCPs from simple to complex matrix samples.

The non-edible and disposable parts of oyster mushroom, as novel adsorbent for quantitative removal of atrazine and its degradation products from synthetic wastewater

In this study, the non-edible part of oyster mushroom was utilized for quantitative removal of the most commonly used s-triazine herbicide; atrazine and its breakdown products including deethylatrazine (DEA), hydroxyatrazine (ATOH) and deisopropylatrazine (DIA) from aqueous samples. The functional groups available on the oyster mushroom were studied applying FTIR before and after adsorption. Experimental parameters influencing the uptake process including acidity, sorbent mass, sorption time, initial analyte quantities, and agitation speed were analysed and the maximum removal was found at 4, 0.3 g, 120 min, 0.5 mg L-1, and 150 rpm, respectively. Accordingly, the adsorption capacities of 0.994, 1.113, 0.991 and 1.016 mg g-1 were obtained for DIA, DEA, ATOH and atrazine, respectively. The adsorption characteristics were discussed utilizing Langmuir and Freundlich isotherm models. The fundamental characteristic of the Langmuir isotherm, which can be elaborated using separation factor or equilibrium parameter, RL, and coefficient of variation, R2, were (0.761, 0.996), (0.884, 0.975), (0.908, 0.983) and (0.799, 0.984) for DIA, DEA, ATOH and Atrazine, respectively. These findings showed that all analytes' adsorption processes were fitted well to the Langmuir adsorption isotherm, indicating that the adsorbent surface was covered in a monolayer. The kinetics was also evaluated using the pseudo-first and pseudo-second order models. The coefficient of determination, r2, were found to be 0.09703, 0.9989, 0.9967 and 0.9998 for DIA DEA, ATOH and atrazine, respectively, for pseudo-second order, signifying that, all analytes were found to follow the pseudo-second order rate model showing that the rate limiting step is chemisorption in the sorption process. Based on these findings, the non-edible and disposable part of the oyster mushrooms can be utilized as a preferred alternative biosorbent for the uptake of the target compounds analysed and other pollutants possessing comparable physicochemical characteristics occurring in various water bodies.

Review of scientific literature on available methods of assessing organochlorine pesticides in the environment

Organochlorine pesticides (OCPs) are persistent organic pollutants (POPs) widely used in agriculture and industry, causing serious health and ecological consequences upon exposure. This review offers a thorough overview of OCPs analysis emphasizing the necessity of ongoing work to enhance the identification and monitoring of these POPs in environmental and human samples. The benefits and drawbacks of the various OCPs analysis techniques including gas chromatography-mass spectrometry (GC-MS), gas chromatography-electron capture detector (GC-ECD), and liquid chromatography-mass spectrometry (LC-MS) are discussed. Challenges associated with validation and optimization criteria, including accuracy, precision, limit of detection (LOD), and limit of quantitation (LOQ), must be met for a method to be regarded as accurate and reliable. Suitable quality control measures, such as method blanks and procedural blanks, are emphasized. The LOD and LOQ are critical quality control measure for efficient quantification of these compounds, and researchers have explored various techniques for their calculation. Matrix interference, solubility, volatility, and partition coefficient influence OCPs occurrences and are discussed in this review. Validation experiments, as stated by European Commission in document SANTE/11813/2017, showed that the acceptance criteria for method validation of OCP analytes include ≤20 % for high precision, and 70-120 % for recovery. This may ultimately be vital for determining the human health risk effects of exposure to OCP and for formulating sensible environmental and public health regulations.

Effervescent powder-assisted floating organic solvent-based dispersive liquid-liquid microextraction for determination of organochlorine pesticides in water by GC-MS

An effervescent powder-assisted floating organic solvent-based dispersive liquid-liquid microextraction was introduced for determination of 13 organochlorine pesticides in water samples. In this method, a less toxic low-density organic solvent was used as extraction solvent. The extraction solvent was dispersed in to the aqueous sample via CO₂ bubbles, in-situ generated up on addition of water to a falcon tube containing the mixture of effervescent powder precursors as well as the extraction solvent. Various experimental parameters such as effervescent and its weight fractions, extraction solvent type and its volume, the total mass of effervescent precursors, and the effect of salt were investigated and the optimal conditions were established. Under the optimum conditions, the proposed method exhibited good linearity for all target pesticides with the coefficient of determinations varying from 0.9981 to 0.9997. The limits of detection and quantification were within the range of 0.03-0.24 and 0.26-0.75 μg/L, respectively. The intra- and inter-day precisions which were expressed in terms of the relative standard deviation ranged from 0.33 to 4.47 and 0.51-5.52%, respectively. The enrichment factors and recoveries ranged from 24 to 293 and 76-116%, respectively. The proposed method could be used simple, cheap, fast, and environmentally friendly alternative for analysis of organochlorine pesticides from environmental water and other similar matrices.