V2O5-Fe3O4/rGO Ternary Nanocomposite with Dual Applications as a Dye Degradation Photocatalyst and OER Electrocatalyst

The design and synthesis of structured nanomaterials with dual properties have always been highly attractive in various fields, especially in the reduction of environmental pollution as well as the generation of renewable energy. In this study, the synthesized ternary V2O5-Fe3O4/rGO nanocomposite was investigated to evaluate both the photocatalytic and electrocatalytic activities for the removal of methylene blue (MB) dye under UV/visible light radiation and oxygen evolution reaction (OER), respectively. The magnetized V2O5-Fe3O4/rGO nanocomposite is characterized by TEM, FE-SEM (with coupling by elemental mapping), EDS, XRD, FTIR, Raman, PL, DRS, and UV-vis analyses. The obtained results show that the graphene oxide substrate is decorated very well using Fe3O4 and V2O5 nanoparticles and converted to reduced graphene oxide (rGO). Furthermore, the V2O5-Fe3O4/rGO nanocomposite is considered as an active catalyst material to modify the commercial glassy carbon electrode for OER using linear sweep voltammetry (LSV). The photocatalytic activity of this novel nanocomposite revealed 89.2% (kobs = 1.7 × 10-2 min-1) and 76% (kobs = 8.3 × 10-3 min-1) degradation efficiencies of MB dye under UV and visible light irradiation at room temperature, respectively, and the surface area of the V2O5-Fe3O4/rGO nanocomposite was examined to be 705.8 cm2/g by N2 adsorption-desorption isotherms. In addition, electrochemical measurements determined the best OER performance of the ternary nanocomposite with the lowest overpotential (458 mV) and Tafel slope (132 mV dec-1) compared to the rGO substrate, Fe3O4, V2O5 nanoparticles, and binary nanocomposites. This work shows much enhancements in both photocatalytic and electrocatalytic activities due to the synergistic effect of the decorated GO support with V2O5 and Fe3O4 nanoparticles.

Development of a ghatti gum/poly (acrylic acid)/TiO2 hydrogel nanocomposite for malachite green adsorption from aqueous media: Statistical optimization using response surface methodology

The primary goal of this study is to prepare and characterize a ghatti gum/poly(acrylic acid)/TiO₂ (GG/poly(AA)/TiO₂) hydrogel nanocomposite for adsorption of the dye malachite green (MG) from the aqueous phase in a discontinuous system. A variety of approaches were used to investigate the structure, morphology, and thermomechanical characteristics of the synthesized hydrogel nanocomposite. Response surface methodology (RSM) was performed to analyze the impact of three processing parameters, namely adsorbent dosage, dye concentration, contact duration, and their interactions on MG dye adsorption capacity. Analysis of variance was used to assess the experimental findings, which revealed that the quadratic regression model was statistically acceptable. The integration of TiO₂ nanoparticles into the hydrogel matrix improved its thermal stability, mechanical strength, and performance in adsorbing MG dye from water. The kinetics and isotherm were evaluated, and the adsorption process was well fitted with pseudo-second order and Temkin isotherm models, respectively. Using the Langmuir equation, the maximum adsorption capacity at 45 °C within 50 min was calculated to be 2145 mg/g. Thermodynamic analysis at 25-45 °C revealed that the MG dye was spontaneously absorbed by the hydrogel nanocomposite. The prepared hydrogel nanocomposite demonstrated excellent reusability without a noticeable loss in MG dye adsorption capability for 6 cycles.

Preparation of CoFe2O4/SiO2/Ag Magnetic Composite as Photocatalyst for Congo Red Dye and Antibacterial Potential

This research reports the synthesized CoFe2O4/SiO2/Ag magnetic composite used as a photocatalyst to degrade Congo red dye and antibacterial agent against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The catalysts were characterized using XRD, SEM-EDS, VSM, UV-DRS, and pHpzc. The effects of photocatalyst dose (0.25, 0.5, 0.75, and 1.0 g/L), dye concentration (10, 20, 30, and 40 mg/L), and irradiation time (0–210 minutes) were all examined as photocatalytic degradation variables. The results showed that the CoFe2O4/SiO2/Ag composite was superparamagnetic with a saturation magnetization of 41.82 emu/g and had a band gap of 1.82 eV. The highest efficiency of decreasing the concentration of Congo red dye of 93.70% was obtained with an initial concentration of 10 mg/L, a catalyst dose of 0.5 g/L, and an irradiation time of 180 minutes. This study indicated that the composite had antibacterial properties against Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria with the same MIC value of 1.25%. These results indicated that the CoFe2O4/SiO2/Ag composite has significant potential for applications in wastewater treatment.

Functional Nanohybrids and Nanocomposites Development for the Removal of Environmental Pollutants and Bioremediation

World population growth, with the consequent consumption of primary resources and production of waste, is progressively and seriously increasing the impact of anthropic activities on the environment and ecosystems. Environmental pollution deriving from anthropogenic activities is nowadays a serious problem that afflicts our planet and that cannot be neglected. In this regard, one of the most challenging tasks of the 21st century is to develop new eco-friendly, sustainable and economically-sound technologies to remediate the environment from pollutants. Nanotechnologies and new performing nanomaterials, thanks to their unique features, such as high surface area (surface/volume ratio), catalytic capacity, reactivity and easy functionalization to chemically modulate their properties, represent potential for the development of sustainable, advanced and innovative products/techniques for environmental (bio)remediation. This review discusses the most recent innovations of environmental recovery strategies of polluted areas based on different nanocomposites and nanohybrids with some examples of their use in combination with bioremediation techniques. In particular, attention is focused on eco-friendly and regenerable nano-solutions and their safe-by-design properties to support the latest research and innovation on sustainable strategies in the field of environmental (bio)remediation.