Improving culture conditions for temporomandibular joint disc tissue engineering

Tissue engineering of the temporomandibular joint disc: current status and future trends

INTRODUCTION

Temporomandibular joint disorders are extremely prevalent and there is no ideal treatment clinically for the moment. For severe cases, a discectomy often need to be performed, which will further result in the development of osteoarthritis. In the past thirty years, tissue engineering has provided a promising approach for the effective remedy of severe TMJ disease through the creation of viable, effective, and biological functional implants.

METHODS

Although TMJ disc tissue engineering is still in early stage, unremitting efforts and some achievements have been made over the past decades. In this review, a comprehensive summary of the available literature on the progress and status in tissue engineering of the TMJ disc regarding cell sources, scaffolds, biochemical and biomechanical stimuli, and other prospects relative to this field is provided.

RESULTS AND CONCLUSIONS

Even though research studies in this field are too few compared to other fibrocartilage (e.g., knee meniscus) and numerous, difficult tasks still exist, we believe that our ultimate goal of regenerating a biological implant whose histological, biochemical, and biomechanical properties parallel native TMJ discs for clinical therapy will be achieved in the near future.

Harnessing biomechanics to develop cartilage regeneration strategies

As this review was prepared specifically for the American Society of Mechanical Engineers H.R. Lissner Medal, it primarily discusses work toward cartilage regeneration performed in Dr. Kyriacos A. Athanasiou's laboratory over the past 25 years. The prevalence and severity of degeneration of articular cartilage, a tissue whose main function is largely biomechanical, have motivated the development of cartilage tissue engineering approaches informed by biomechanics. This article provides a review of important steps toward regeneration of articular cartilage with suitable biomechanical properties. As a first step, biomechanical and biochemical characterization studies at the tissue level were used to provide design criteria for engineering neotissues. Extending this work to the single cell and subcellular levels has helped to develop biochemical and mechanical stimuli for tissue engineering studies. This strong mechanobiological foundation guided studies on regenerating hyaline articular cartilage, the knee meniscus, and temporomandibular joint (TMJ) fibrocartilage. Initial tissue engineering efforts centered on developing biodegradable scaffolds for cartilage regeneration. After many years of studying scaffold-based cartilage engineering, scaffoldless approaches were developed to address deficiencies of scaffold-based systems, resulting in the self-assembling process. This process was further improved by employing exogenous stimuli, such as hydrostatic pressure, growth factors, and matrix-modifying and catabolic agents, both singly and in synergistic combination to enhance neocartilage functional properties. Due to the high cell needs for tissue engineering and the limited supply of native articular chondrocytes, costochondral cells are emerging as a suitable cell source. Looking forward, additional cell sources are investigated to render these technologies more translatable. For example, dermis isolated adult stem (DIAS) cells show potential as a source of chondrogenic cells. The challenging problem of enhanced integration of engineered cartilage with native cartilage is approached with both familiar and novel methods, such as lysyl oxidase (LOX). These diverse tissue engineering strategies all aim to build upon thorough biomechanical characterizations to produce functional neotissue that ultimately will help combat the pressing problem of cartilage degeneration. As our prior research is reviewed, we look to establish new pathways to comprehensively and effectively address the complex problems of musculoskeletal cartilage regeneration.

The pilot study of fibrin with temporomandibular joint derived synovial stem cells in repairing TMJ disc perforation

TMJ disc related diseases are difficult to be cured due to the poor repair ability of the disc. TMJ-SDSCs were ideal cell sources for cartilage tissue engineering which have been widely used in hyaline cartilage regeneration. Fibrin gel has been demonstrated as a potential scaffold for neocartilage formation. The aim of this study was to repair the TMJ disc perforation using fibrin/chitosan hybrid scaffold combined with TMJ-SDSCs. Rat TMJ-SDSCs were cultured on hybrid scaffold or pure chitosan scaffolds. The cell seeding efficiency, distribution, proliferation, and chondrogenic differentiation capacity were investigated. To evaluate the in vivo repair ability of cell/scaffold construct, rat TMJ disc explants were punched with a defect to mimic TMJ disc perforation. Cell seeded scaffolds were inserted into the defect of TMJ disc explants and then were implanted subcutaneously in nude mice for 4 weeks. Results demonstrated that fibrin may improve cell seeding, proliferation, and chondrogenic induction in vitro. The in vivo experiments showed more cartilage ECM deposition in fibrin/chitosan scaffold, which suggested an enhanced reparative ability. This pilot study demonstrated that the regenerative ability of TMJ-SDSCs seeded in fibrin/chitosan scaffold could be applied for repairing TMJ disc perforation.

Extracellular matrix as an inductive scaffold for functional tissue reconstruction

The extracellular matrix (ECM) is a meshwork of both structural and functional proteins assembled in unique tissue-specific architectures. The ECM both provides the mechanical framework for each tissue and organ and is a substrate for cell signaling. The ECM is highly dynamic, and cells both receive signals from the ECM and contribute to its content and organization. This process of "dynamic reciprocity" is key to tissue development and for homeostasis. Based upon these important functions, ECM-based materials have been used in a wide variety of tissue engineering and regenerative medicine approaches to tissue reconstruction. It has been demonstrated that ECM-based materials, when appropriately prepared, can act as inductive templates for constructive remodeling. Specifically, such materials act as templates for the induction of de novo functional, site-appropriate, tissue formation. Herein, the diverse structural and functional roles of the ECM are reviewed to provide a rationale for the use of ECM scaffolds in regenerative medicine. Translational examples of ECM scaffolds in regenerative are provided, and the potential mechanisms by which ECM scaffolds elicit constructive remodeling are discussed. A better understanding of the ability of ECM scaffold materials to define the microenvironment of the injury site will lead to improved clinical outcomes associated with their use.

Autologous adipose stem cells and polylactide discs in the replacement of the rabbit temporomandibular joint disc

The temporomandibular joint (TMJ) disc lacks functional replacement after discectomy. We investigated tissue-engineered bilayer polylactide (PLA) discs and autologous adipose stem cells (ASCs) as a potential replacement for the TMJ disc. These ASC discs were pre-cultured either in control or in differentiation medium, including transforming growth factor (TGF)-β1 for one week. Prior to implantation, expression of fibrocartilaginous genes was measured by qRT-PCR. The control and differentiated ASC discs were implanted, respectively, in the right and left TMJs of rabbits for six (n = 5) and 12 months (n = 5). Thereafter, the excised TMJ areas were examined with cone beam computed tomography (CBCT) and histology. No signs of infection, inflammation or foreign body reactions were detected at histology, whereas chronic arthrosis and considerable condylar hypertrophy were observed in all operated joints at CBCT. The left condyle treated with the differentiated ASC discs appeared consistently smoother and more sclerotic than the right condyle. The ASC disc replacement resulted in dislocation and morphological changes in the rabbit TMJ. The ASC discs pre-treated with TGF-β1 enhanced the condylar integrity. While adverse tissue reactions were not shown, the authors suggest that with improved attachment and design, the PLA disc and biomaterial itself would hold potential for TMJ disc replacement.

Inductive, scaffold-based, regenerative medicine approach to reconstruction of the temporomandibular joint disk

PURPOSE

A device composed of extracellular matrix (ECM) was investigated as an inductive template in vivo for reconstruction of the temporomandibular joint (TMJ) disk after discectomy.

MATERIALS AND METHODS

A scaffold material composed of porcine-derived ECM was configured to mimic the shape and size of the TMJ. This device was implanted in a canine model of bilateral TMJ discectomy. After discectomy, 1 side was repaired with an ECM scaffold material and the contralateral side was left empty as a control. At 6 months after implantation, the joint space was opened, the joints were evaluated for signs of gross pathologic degenerative changes, and newly formed tissue was excised for histologic, biochemical, and biomechanical analysis.

RESULTS

The results showed that implantation of an initially acellular material supported the formation of site-appropriate, functional host tissue that resembled that of the native TMJ disk. Furthermore, this prevented gross degenerative changes in the temporal fossa and mandibular condyle. No tissue formation and mild to severe gross pathologic changes were observed in the contralateral controls.

CONCLUSIONS

These results suggest that an ECM-based bioscaffold could represent an off-the-shelf solution for TMJ disk replacement.

Extracellular matrix as an inductive template for temporomandibular joint meniscus reconstruction: a pilot study

PURPOSE

A device consisting of powdered porcine urinary bladder extracellular matrix (UBM-ECM) encapsulated within sheets of the same material was investigated as a scaffold for temporomandibular joint (TMJ) meniscus reconstruction.

MATERIALS AND METHODS

Five dogs underwent unilateral resection of the native meniscus and replacement with a UBM-ECM device. Necropsies were performed at 3, 4, 8, 12, and 24 weeks. Two additional dogs underwent bilateral resection of the meniscus with replacement with a UBM-ECM device on 1 side, leaving the contralateral side empty as a control. Necropsies were performed at 24 weeks for bilaterally treated animals.

RESULTS

Macroscopically, the UBM-ECM implants were remodeled rapidly and were indistinguishable from newly deposited host tissue at all time points. Microscopically, remodeling was characterized by a dense infiltration of predominantly CD68(+) mononuclear cells and smooth muscle actin-positive fibroblast-like cells at early time points changing with time to a sparse population of smooth muscle actin-negative spindle-shaped cells resembling those of the native fibrocartilaginous TMJ meniscus. Furthermore, the remodeling process showed deposition of predominantly type I collagen, the density and organization of which resembled those of the native meniscus by the 24-week time point. Ingrowth of calsequestrin-positive skeletal muscle tissue was also observed at the periphery of the remodeled UBM-ECM device and was similar to that found at the attachment site of the native meniscus to the surrounding soft tissues. Histologic results were identical for samples excised from both unilaterally and bilaterally treated animals. No adverse changes in the articulating surfaces of the condyle or fossa were observed in UBM-ECM-implanted joints. In the bilaterally treated animals, the unimplanted control side was characterized by degeneration and pitting of the articulating surfaces of both the condyle and the fossa, with disorganized bands of fibrous connective tissue observed within the joint space.

CONCLUSION

Results of this study suggest that the UBM-ECM device provides an effective interpositional material while serving as an inductive template for reconstruction of the TMJ meniscus.

Assessment of growth factor treatment on fibrochondrocyte and chondrocyte co-cultures for TMJ fibrocartilage engineering

Treatments for patients suffering from severe temporomandibular joint (TMJ) dysfunction are limited, motivating the development of strategies for tissue regeneration. In this study, co-cultures of fibrochondrocytes (FCs) and articular chondrocytes (ACs) were seeded in agarose wells, and supplemented with growth factors, to engineer tissue with biomechanical properties and extracellular matrix composition similar to native TMJ fibrocartilage. In the first phase, growth factors were applied alone and in combination, in the presence or absence of serum, while in the second phase, the best overall treatment was applied at intermittent dosing. Continuous treatment of AC/FC co-cultures with TGF-β1 in serum-free medium resulted in constructs with glycosaminoglycan/wet weight ratios (12.2%), instantaneous compressive moduli (790 kPa), relaxed compressive moduli (120 kPa) and Young's moduli (1.87 MPa) that overlap with native TMJ disc values. Among co-culture groups, TGF-β1 treatment increased collagen deposition ∼20%, compressive stiffness ∼130% and Young's modulus ∼170% relative to controls without growth factor. Serum supplementation, though generally detrimental to functional properties, was identified as a powerful mediator of FC construct morphology. Finally, both intermittent and continuous TGF-β1 treatment showed positive effects, though continuous treatment resulted in greater enhancement of construct functional properties. This work proposes a strategy for regeneration of TMJ fibrocartilage and its future application will be realized through translation of these findings to clinically viable cell sources.

Use of adipose stem cells and polylactide discs for tissue engineering of the temporomandibular joint disc

There is currently no suitable replacement for damaged temporomandibular joint (TMJ) discs after discectomy. In the present study, we fabricated bilayer biodegradable polylactide (PLA) discs comprising a non-woven mat of poly(L/D)lactide (P(L/D)LA) 96/4 and a P(L/DL)LA 70/30 membrane plate. The PLA disc was examined in combination with adipose stem cells (ASCs) for tissue engineering of the fibrocartilaginous TMJ disc in vitro. ASCs were cultured in parallel in control and chondrogenic medium for a maximum of six weeks. Relative expression of the genes, aggrecan, type I collagen and type II collagen present in the TMJ disc extracellular matrix increased in the ASC-seeded PLA discs in the chondrogenic medium. The hypertrophic marker, type X collagen, was moderately induced. Alcian blue staining showed accumulation of sulphated glycosaminoglycans. ASC differentiation in the PLA discs was close to that observed in pellet cultures. Comparison of the mRNA levels revealed that the degree of ASC differentiation was lower than that in TMJ disc-derived cells and tissue. The pellet format supported the phenotype of the TMJ disc-derived cells under chondrogenic conditions and also enhanced their hyalinization potential, which is considered part of the TMJ disc degeneration process. Accordingly, the combination of ASCs and PLA discs has potential for the development of a tissue-engineered TMJ disc replacement.

A comparison of primary and passaged chondrocytes for use in engineering the temporomandibular joint

OBJECTIVE

This study examines the tissue engineering potential of passaged (P3) and primary (P0) articular chondrocytes (ACs) and costal chondrocytes (CCs) from skeletally mature goats for use in the temporomandibular joint (TMJ).

DESIGN

These four cell types were assembled into scaffoldless tissue engineered constructs and cultured for 4 wks. The constructs were then tested for cell, collagen, and glycosaminoglycan (GAG) content with biochemical assays, and collagen types I and II with enzyme-linked immunosorbent assays. Constructs were also tested under tension and compression to determine biomechanical properties.

RESULTS

Both primary and passaged CC constructs had greater GAG/wet weight than AC constructs. Primary AC constructs had significantly less total collagen and contained no collagen type I. AC P3 constructs had the largest collagen I/collagen II ratio, which was also greater in passaged CC constructs relative to primary groups. Primary AC constructs were not mechanically testable, whereas passaged AC and CC constructs had significantly greater tensile properties than primary CC constructs.

CONCLUSIONS

Primary CCs are considerably better than primary ACs and have potential use in tissue engineering when larger quantities of collagen type II are desired. The poor performance of the ACs, in this study, which contradicts the results seen with previous studies using immature bovine ACs, may thus be attributed to the animals' maturity. However, CC P3 cells appear particularly well suited for tissue engineering fibrocartilage of the TMJ due to the high quantity of collagen and GAG, and tensile and compressive mechanical properties.

Passaged goat costal chondrocytes provide a feasible cell source for temporomandibular joint tissue engineering

Costal cartilage is commonly harvested for various types of facial reconstructive surgery. The ability of costal chondrocytes (CCs) to produce relevant extracellular matrix, including glycosaminoglycans (GAGs) and collagens, makes them an appealing cell source for fibrocartilage engineering. In order to obtain enough cells for tissue engineering, however, cell expansion will likely be necessary. This study examined CCs at passages 0, 1, 3, and 5, as well as temporomandibular (TMJ) disc cells, in a scaffoldless tissue engineering approach. It was hypothesized that earlier passage constructs would have more cartilaginous proteins and less fibrocartilaginous proteins. TMJ disc constructs had over twice the collagen content of any other group, as well as the largest tensile properties; however, the substantial contraction of the constructs and limited cell numbers make it a non-feasible cell source for tissue engineering. In general, statistical differences in mechanical properties or collagen content of the various CC groups were not observed; however, significantly more GAG was produced in the passaged CCs than the primary CCs. More collagen type II was also observed in some of the passaged groups. These results suggest not only feasibility but potential superiority of passaged CCs over primary CCs, which may lead to functional engineered fibrocartilage.

Clinically relevant cell sources for TMJ disc engineering

Tissue-engineering of the temporomandibular joint (TMJ) disc aims to provide patients with TMJ disorders an option to replace diseased tissue with autologous, functional tissue. This study examined clinically relevant cell sources by comparing costal chondrocytes, dermal fibroblasts, a mixture of the two, and TMJ disc cells in a scaffoldless tissue-engineering approach. It was hypothesized that all constructs would produce matrix relevant to the TMJ disc, but the mixture constructs were expected to appear most like the TMJ disc constructs. Costal chondrocyte and mixture constructs were morphologically and biochemically superior to the TMJ disc and dermal fibroblast constructs, and their compressive properties were not significantly different. Costal chondrocyte constructs produced almost 40 times more collagen and 800 times more glycosaminoglycans than did TMJ constructs. This study demonstrates the ability of costal chondrocytes to produce extracellular matrix that may function in a TMJ disc replacement.