Hiding in Plain Sight: Human Gingival Fibroblasts as an Essential, Yet Overlooked, Tool in Regenerative Medicine

Adult human gingival fibroblasts (HGFs), the most abundant cells in the oral cavity, are essential for maintaining oral homeostasis. Compared with other tissues, adult oral mucosal wounds heal regeneratively, without scarring. Relative to fibroblasts from other locations, HGFs are relatively refractory to myofibroblast differentiation, immunomodulatory, highly regenerative, readily obtained via minimally invasive procedures, easily and rapidly expanded in vitro, and highly responsive to growth factors and cytokines. Consequently, HGFs might be a superior, yet perhaps underappreciated, source of adult mesenchymal progenitor cells to use in tissue engineering and regeneration applications, including the treatment of fibrotic auto-immune connective tissue diseases such as scleroderma. Herein, we highlight in vitro and translational studies that have investigated the regenerative and differentiation potential of HGFs, with the objective of outlining current limitations and inspiring future research that could facilitate translating the regenerative potential of HGFs into the clinic.

Recent Advances in Three-Dimensional Multicellular Spheroid Culture and Future Development

Three-dimensional multicellular spheroids (MCSs) have received extensive attention in the field of biomedicine due to their ability to simulate the structure and function of tissues in vivo more accurately than traditional in vitro two-dimensional models and to simulate cell-cell and cell extracellular matrix (ECM) interactions. It has become an important in vitro three-dimensional model for tumor research, high-throughput drug screening, tissue engineering, and basic biology research. In the review, we first summarize methods for MCSs generation and their respective advantages and disadvantages and highlight the advances of hydrogel and microfluidic systems in the generation of spheroids. Then, we look at the application of MCSs in cancer research and other aspects. Finally, we discuss the development direction and prospects of MCSs.

Redox-responsive functionalized hydrogel marble for the generation of cellular spheroids

Liquid marbles (LMs) have recently shown a great promise as microbioreactors to construct self-supported aqueous compartments for chemical and biological reactions. However, the evaporation of the inner aqueous liquid core has limited their application, especially in studying cellular functions. Hydrogels are promising scaffolds that provide a spatial environment suitable for three-dimensional cell culture. Here, we describe the fabrication of redox-responsive hydrogel marbles (HMs) as a three-dimensional cell culture platform. The HMs are prepared by introducing an aqueous mixture of a tetra-thiolated polyethylene glycol (PEG) derivative, thiolated gelatin (Gela-SH), horseradish peroxidase, a small phenolic compound, and human hepatocellular carcinoma cells (HepG2) to the inner aqueous phase of LMs. Eventually, HepG2 cells are encapsulated in the HMs then immersed in culture media, where they proliferate and form cellular spheroids. Experimental results show that the Gela-SH concentration strongly influences the physicochemical and microstructure properties of the HMs. After 6 days in culture, the spheroids were recovered from the HMs by degrading the scaffold, and examination showed that they had reached up to about 180 μm in diameter depending on the Gela-SH concentration, compared with 60 μm in conventional HMs without Gela-SH. After long-term culture (over 12 days), the liver-specific functions (secretion of albumin and urea) and DNA contents of the spheroids cultured in the HMs were elevated compared with those cultured in LMs. These results suggest that the developed HMs can be useful in designing a variety of microbioreactors for tissue engineering applications.

Morphological and kinetic study of oral keratinocytes assembly on reconstituted basement membrane: Effect of TEGDMA

OBJECTIVE

Open wounds of oral cavity require rapid healing. The cytotoxic monomer, triethylene glycol dimethacrylate (TEGDMA) can leach out from dental restoratives, reach the oral epithelial barrier and trigger an immune response. It is speculated that low and moderate concentrations of TEGDMA (0.5 and 1.5 mmol/L, respectively) influence the assembly kinetics and morphology of the keratinocyte layers overlying the extracellular matrix (ECM) in vivo. A three-dimensional cell system composed of immortalized oral keratinocytes (iMOK) cultured on reconstituted basement membrane (ECM) was used to investigate the development of epithelial layers upon exposure to TEGDMA.

METHODS

Adherence and opposing movement of adjacent keratinocytes using actin protrusions (lamellipodia and filopodia) to create spheroids, and their fusion capacity to establish subsequent layers were tested at different time points. Fluorescent, confocal, differential interference contrast microscopy and image processing were employed to quantify the morphological modifications over time.

RESULTS

Increasing concentrations of TEGDMA decreased the number of viable cells that utilized the actin protrusions and led to a delay in the communication/interaction among cells. Consequently, cells assembly was affected and the formation of more than a single layer prevented. Areas of basal-like proliferating cells were replaced with the increasing areas of non-replicating large cell population and extended gaps.

CONCLUSIONS

These findings suggest that TEGDMA may prevent rapid sealing of open wounds by keratinocytes and suppress the establishment of a resistant and impermeable barrier against pathogen internalization. The iMOK-ECM-based platform facilitated the validation and quantification of solubilized dental materials impact on the reconstitution of epithelial layer.

Contraction Dynamics of Rod Microtissues of Gingiva-Derived and Periodontal Ligament-Derived Cells

Tissue engineering strategies using microtissues as "building blocks" have high potential in regenerative medicine. Cognition of contraction dynamics involved in the in vitro self-assembly of these microtissues can be conceived as the bedrock of an effective periodontal tissue regenerative therapy. Our study was directed at evaluating the shrinkage in the rod-shaped structure of a directed self-assembly of human gingiva-derived cells (GC) and periodontal ligament-derived cells (PDLC) and developing insights into the potential mechanisms responsible for the shrinkage. GC and PDLC were seeded in non-adherent agarose molds to form rod microtissues. Cells used for the experiments were characterized using fluorescence-activated cell sorting (FACS). To assess the viability, resazurin-based cytotoxicity assays, trypan blue dye exclusion assay, MTT and live/dead staining, and histological evaluation of rods based on hematoxylin and eosin staining were performed. Rod contraction was evaluated and measured at 0, 2, 6, and 24 h and compared to L-929 cells. The role of transforming growth factor (TGF)-β signaling, phosphoinositide 3-kinase (PI3K)/AKT, and mitogen activated protein kinase (MAPK) signaling was analyzed. Our results show that the rod microtissues were vital after 24 h. A reduction in the length of rods was seen in the 24 h period. While the recombinant TGF-β slightly reduced contraction, inhibition of TGF-β signaling did not interfere with the contraction of the rods. Interestingly, inhibition of phosphoinositide 3-kinase by LY294002 significantly delayed contraction in GC and PDLC rods. Overall, GC and PDLC have the ability to form rod microtissues which contract over time. Thus, approaches for application of these structures as "building blocks" for periodontal tissue regeneration should consider that rods have the capacity to contract substantially. Further investigation will be needed to unravel the mechanisms behind the dynamics of contraction.

Angiogenin production in response to hypoxia and l-mimosine in periodontal fibroblasts

BACKGROUND

A major mediator of angiogenesis is angiogenin, which is expressed in the early phase of healing in oral tissue engineering strategies. It is unclear how angiogenin is regulated in the periodontal tissue. The objective of this study was to reveal the regulation of angiogenin in response to hypoxia and the hypoxia mimetic agent l-mimosine in periodontal fibroblasts.

METHODS

Human fibroblasts of the periodontal ligament (PDLF) and the gingiva (GF) in monolayer and spheroid cultures were exposed to hypoxia or l-mimosine. The production of angiogenin was evaluated at mRNA and protein levels with reverse transcription quantitative polymerase chain reaction and enzyme-linked immunosorbent assays, respectively. Echinomycin, an inhibitor of hypoxia-inducible factor (HIF)-1 activity, was used to test the involvement of HIF-1.

RESULTS

Our data show that hypoxia and l-mimosine can increase angiogenin mRNA and protein levels in PDLF monolayer cultures. In GF monolayer cultures, we found an increase of angiogenin at the mRNA level in response to hypoxia. The increase of angiogenin can be blocked by inhibition of HIF-1 signaling via echinomycin. In PDLF and GF spheroid cultures, the impact of hypoxia and l-mimosine did not reach the level of significance.

CONCLUSION

Hypoxia and the hypoxia mimetic agent l-mimosine can increase the production of angiogenin via HIF-1 signaling in PDLF monolayer cultures but not in spheroid cultures. GF were less sensitive to the impact of hypoxia and l-mimosine. Overall, these results suggest a link between hypoxia, HIF-1 signaling and angiogenin in the periodontium.

Assessing the effect of triethyleneglycol dimethacrylate on tissue repair in 3D organotypic cultures

Leachables from dental restoratives induce toxicity in gingival and pulp tissues and affect tissue regeneration/healing. Appropriate testing of these materials requires a platform that mimics the in vivo environment and allows the architectural self-assembly of cells into tissue constructs. In this study, we employ a new 3D model to assess the impact of triethyleneglycol dimethacrylate (TEGDMA) on early organization and advanced recruitment/accumulation of immortalized mouse gingival fibroblasts (GFs) and dental papilla mesenchymal cells (DPMCs) in extracellular matrix. We hypothesize that TEGDMA (1) interferes with the developmental architecture of GFs and DPMCs, and (2) inhibits the deposition of mineral. To test these hypotheses, GFs and DPMCs were incubated with the soluble TEGDMA at concentrations (0-2.5) mmol/L. Diameter and thickness of the constructs were determined by microscopic analysis. Cell differentiation was assessed by immunocytochemistry and the secreted mineral detected by alizarin-red staining. TEGDMA interfered with the development of GFs and/or DPMCs microtissues in a dose-dependent manner by inhibiting growth of inter-spherical cell layers and decreasing spheroid size (four to six times). At low/moderate TEGDMA levels, GFs organoids retained their structures while reducing thickness up to 21%. In contrast, at low TEGDMA doses, architecture of DPMC organoids was altered and thickness decreased almost twofold. Overall, developmental ability of TEGDMA-exposed GFs and DPMCs depended on TEGDMA level. GFs constructs were more resistant to structural modifications. The employed 3D platform was proven as an efficient tool for quantifying the effects of leachables on tissue repair capacities of gingiva and dental pulp.

Effects of protein-coated nanofibers on conformation of gingival fibroblast spheroids: potential utility for connective tissue regeneration

Deep wounds in the gingiva caused by trauma or surgery require a rapid and robust healing of connective tissues. We propose utilizing gas-brushed nanofibers coated with collagen and fibrin for that purpose. Our hypotheses are that protein-coated nanofibers will: (i) attract and mobilize cells in various spatial orientations, and (ii) regulate the expression levels of specific extracellular matrix (ECM)-associated proteins, determining the initial conformational nature of dense and soft connective tissues. Gingival fibroblast monolayers and 3D spheroids were cultured on ECM substrate and covered with gas-blown poly-(DL-lactide-co-glycolide) (PLGA) nanofibers (uncoated/coated with collagen and fibrin). Cell attraction and rearrangement was followed by F-actin staining and confocal microscopy. Thicknesses of the cell layers, developed within the nanofibers, were quantified by ImageJ software. The expression of collagen1α1 chain (Col1α1), fibronectin, and metalloproteinase 2 (MMP2) encoding genes was determined by quantitative reverse transcription analysis. Collagen- and fibrin- coated nanofibers induced cell migration toward fibers and supported cellular growth within the scaffolds. Both proteins affected the spatial rearrangement of fibroblasts by favoring packed cell clusters or intermittent cell spreading. These cell arrangements resembled the structural characteristic of dense and soft connective tissues, respectively. Within three days of incubation, fibroblast spheroids interacted with the fibers, and grew robustly by increasing their thickness compared to monolayers. While the ECM key components, such as fibronectin and MMP2 encoding genes, were expressed in both protein groups, Col1α1 was predominantly expressed in bundled fibroblasts grown on collagen fibers. This enhanced expression of collagen1 is typical for dense connective tissue. Based on results of this study, our gas-blown, collagen- and fibrin-coated PLGA nanofibers are viable candidates for engineering soft and dense connective tissues with the required structural characteristics and functions needed for wound healing applications. Rapid regeneration of these layers should enhance healing of open wounds in a harsh oral environment.

Structural and recovery mechanisms of 3D dental pulp cell microtissues challenged with Streptococcusmutans in extracellular matrix environment

Cariopathogen Streptococcus mutans exists in infected dental pulp of deciduous teeth and is frequently linked with heart diseases. Organotypic (3D) dental pulp stem cell (DPSC) cultures/microtissues, developed to mimic the physiological conditions in vivo, were utilized to assess the bacterial impact on their (i) 3D structural configuration and (ii) recovery mechanisms. The cultures, developed in extracellular matrix (ECM) bio-scaffold (Matrigel™), interacted with WT and GFP-tagged bacterial biofilms by permitting their infiltration through the ECM. Challenged cell constructs were visualized by F-actin/nuclei staining. Their pluripotency (Sox2) and differentiation (osteocalcin) markers were assessed by immunocytochemistry. Secreted mineral was detected by alizarin red, and 3D structural arrangements were analysed by epi-fluorescence and confocal scanning microscopy. Bacterial biofilm/ECM-embedded DPSC interactions appeared in distinct areas of the microtissues. Bacterial attachment to the cell surface occurred without evidence of invasion. Surface architecture of the challenged versus unchallenged microtissues was apparently unaltered. However, significant increases in thickness (138.42 vs 106.51 µm) and bacterial penetration were detected in challenged structures causing canal-like microstructures with various diameters (12.94 -42.88 µm) and average diameter of 20.66 to 33.42 µm per microtissue. Challenged constructs expressed pluripotency and differentiation markers and secreted the mineral. Presented model shows strong potential for assessing pulp-pathogen interactions in vivo. S. mutans infiltrated and penetrated the microtissues but did not invade the cells or compromise major cell repair mechanisms. These findings would suggest reexamining the role of S. mutans as an endodontic pathogen and investigating DPSC resistance to its pathogenicity.