Comparison of Profilometric and Microindentation Analyses for Determining the Impact of Saliva on the Abrasion of Initially Eroded Enamel

Effects of erosion and abrasion on resin-matrix ceramic CAD/CAM materials: An in vitro investigation

The aim of the study was to evaluate the effects of erosion and abrasion on resin-matrix ceramic CAD/CAM materials [CERASMART (GC); VITA ENAMIC (VITA Zahnfabrik); Lava Ultimate (3 M)] in comparison to feldspar ceramic (VITABLOCS Mark II, VITA Zahnfabrik) and resin composite materials (ceram.x universal, Dentsply Sirona). Daily brushing and acid exposure were simulated using a brushing apparatus and a solution of 0.5 vol% citric acid. Microhardness, surface roughness, and substance loss were measured at baseline and after simulation of 1 and 3 years of function. All materials showed a decrease in microhardness after 3 years and an increase in surface roughness (Ra) after 1 and 3 years. The Ra increase was statistically significantly lower for the resin-matrix ceramics than for feldspar ceramic and similar to composite material. After 3 years, only feldspar ceramic showed no significant substance loss. In conclusion, resin-matrix ceramics demonstrate reduced roughening compared to feldspar ceramics, potentially improving restoration longevity by preventing plaque buildup, but differences in abrasion resistance suggest the need for further material-specific research. Future research should aim to replicate clinical conditions closely and to transition to in vivo trials.

Association of salivary parameters and erosive tooth wear in preschool children

The aims of this study were to 1) assess the association between erosive tooth wear (ETW) according to the BEWE (Basic Erosive Wear Examination) scoring system and salivary parameters and 2) compare salivary parameters according to ETW severity in the subgroup of children with ETW. This cross-sectional study included 52 preschool children aged 5 years paired by sex. A calibrated examiner assessed ETW using BEWE criteria, and stimulated saliva was collected to determine salivary flow, osmolality, pH, and buffering capacity. The children were divided into two groups: without ETW (n=26; BEWE score 0) and with ETW (n=26; BEWE scores 1 and 2). Logistic regression analysis was used to determine the magnitude of the association between ETW and salivary parameters and estimates of odds ratios (OR). In the unadjusted analysis, the ETW group was more likely to have lower salivary flow (OR = 0.079; 95%CI = 0.013-0.469; p = 0.005) and lower osmolality (OR = 0.993; 95%CI = 0.985-1.000; p = 0.049). In the adjusted analysis, salivary flow remained significantly associated with ETW (OR = 0.087; 95%CI = 0.014-0.533; p = 0.008). Lower salivary osmolality values were observed in ETW, especially in preschool children with more severe ETW (BEWE score 2). Receiver operating characteristic (ROC) determined a salivary osmolality cutoff point of < 201 for the presence of ETW. In conclusion, salivary flow rate was significantly associated with ETW prevalence. Lower values of salivary osmolality were observed in preschool children with distinct erosive lesions with significant loss of tooth structure (BEWE 2).

Influence of violet LED and fluoride-containing carbamide peroxide bleaching gels on early-stage eroded/abraded teeth

PURPOSE

This study evaluated enamel with early-stage erosion/abrasion following bleaching with 20% and 45% carbamide peroxide (CP) gels containing fluoride (F) and irradiated with violet LED (LED).

METHODS

Enamel blocks were immersed in 1% citric acid (5 min) and artificial saliva (120 min) three times to produce early-stage enamel erosion. Simulated toothbrushing was performed only after the first saliva immersion, to provoke enamel abrasion. The erosive/abraded enamel samples were submitted to (n=10): LED/CP20, CP20, LED/CP20_F, CP20_F, LED/CP45, CP45, LED/CP45_F, CP45_F, LED, and control (without treatment). The pH of the gels was assessed, and color (ΔE₀₀) and whiteness index (ΔWI_D) changes were calculated after cycling (T₁), and 7 days from bleaching (T₂). Enamel surface roughness average (Ra) and Knoop microhardness (kg/mm², %SHR) were evaluated at baseline (T₀) at T₁ and T_2. Scanning electron microscopy evaluated the enamel surface morphology at T₂.

RESULTS

The gels' pH was neutral and CP20 and CP45 exhibited no differences in ΔE₀₀ and ΔWI_D (p>0.05) but LED increased these parameters for CP20_F and CP45. Erosion/abrasion significantly decreased mean kg/mm², and the LED group was the only one not increasing microhardness after bleaching (p>0.05). None of the groups fully recovered the initial microhardness. All groups exhibited %SHR similar to the control (p>0.05) and the increase in Ra was detected only after erosion/abrasion. CP20_F groups exhibited a more preserved enamel morphology.

CONCLUSION

Light irradiation combined with low-concentrated CP gel promoted a bleaching effect comparable to the high-concentrated CP. The bleaching protocols did not adversely impact the surface of early-stage eroded/abraded enamel.

Does delayed toothbrushing after the consumption of erosive foodstuffs or beverages decrease erosive tooth wear? A systematic review and meta-analysis

OBJECTIVE

Controversy exists regarding the effectiveness of delayed toothbrushing in decreasing erosive tooth wear (ETW). The purpose of this systematic review and meta-analysis was to assess the effects of delayed toothbrushing on ETW.

MATERIALS AND METHODS

This systematic review and meta-analysis was conducted according to the PRISMA statement and registered in PROSPERO (CRD42020200463). PubMed, Embase, and Web of Science databases were systematically searched with no publication year limits. Screening and data extraction were performed independently by two reviewers. In situ and in vitro studies comparing ETW after delayed and immediate toothbrushing following an erosive attack were included. Review Manager software 5.3 (The Cochrane Collaboration, Oxford, UK) was used for statistical analyses. Heterogeneity was assessed with the Cochran Q test and I² statistics.

RESULTS

Of the 565 potentially relevant studies, 26 full-text articles were assessed for eligibility. Twelve articles were included in the systematic review, and 11 were included in the qualitative analyses. No significant difference in the ETW of human enamel was observed between delayed and immediate toothbrushing (P = 0.13), whereas significantly less ETW of bovine enamel was observed after delayed toothbrushing (P < 0.001). No significant difference in the ETW of bovine dentin was observed between delayed and immediate toothbrushing (P = 0.34). Studies on human dentin were not available. Subgroup analyses revealed a significant contribution of the use of fluoridated toothpaste to decreasing the ETW of human enamel after erosion and toothbrush abrasion (P = 0.02).

CONCLUSIONS

Bovine and human teeth behaved differently in response to erosion and toothbrush abrasion. Delayed toothbrushing after an erosive attack was not effective at decreasing the ETW of human enamel compared to immediate toothbrushing, whereas it was effective at decreasing the ETW of bovine enamel.

CLINICAL RELEVANCE

Delayed toothbrushing alone after the consumption of erosive foodstuffs or beverages is not capable of preventing erosive enamel wear.

The use of fluoride for the prevention of dental erosion and erosive tooth wear in children and adolescents

BACKGROUND

Erosive tooth wear (ETW) has gained increasing clinical relevance. It is estimated that worldwide 30-50% of deciduous and 20-45% of permanent teeth are affected. One of the most important nutritional factors causing ETW is the overconsumption of soft drinks, but also patient-related factors like reflux or eating disorders can lead to erosive lesions. Whether acids lead to erosive demineralisation depends on their degree of saturation with respect to tooth mineral at their actual pH.

REVIEW

Fluoride compounds like sodium or amine fluoride seem to be of limited efficacy against erosion, the main reason for this is the missing biofilm in the erosive process as well as the lower pH of the acids compared to bacterial acids. This means that to achieve some kind of preventive effect it would be necessary to use products with higher fluoride concentration, which is not an appropriate option for small children, and/or to increase the frequency of application. In addition, the fluoride compound plays a role as promising effects were found when fluoride is combined with titanium or stannous ions. TiF₄ can cause acid-resistant surface coatings and when Sn²⁺/F^- formulations are applied, Sn is not only found on the surface but is also incorporated into enamel and dentine. Both effects make the tooth surface more resistant against acid demineralisation. Different fluoride-containing vehicles have been tested to prevent erosion/ETW, such as toothpastes, rinses, gels and varnishes. Toothpastes offer some degree of protection, especially Sn²⁺-containing formulations, but effects of the active ingredients are sometimes counteracted by the presence of abrasives.

CONCLUSION

Detecting associated factors and influencing them is the main instrument in arresting erosive tooth wear. Additionally, patients at risk for dental erosion should always use an additional fluoride source preferably containing Sn²⁺.

Surface characteristics of a modified acidulated phosphate fluoride gel with nano-hydroxyapatite coating applied on bovine enamel subjected to an erosive environment

This study evaluated the antierosive effect applying a modified acidulated phosphate fluoride (APF) gel containing nano-hydroxyapatite (nHAp) on the enamel surface before erosion. After polishing, the exposed flat enamel surfaces (n = 7/group) from bovine incisors were treated with artificial saliva (S - negative control), orange juice (ERO), APF gel (positive control) and APF_nHAp gel. All samples were subjected to six cycles of demineralization (orange juice, pH ~ 3.5, 10 min) followed by remineralization (saliva, 37°C, 1 hr). The enamel surface morphology, topography, and inorganic composition were analyzed using scanning electron microscopy, roughness testing, and micro energy-dispersive X-ray fluorescence spectrometry, respectively. The mean (standard deviation) roughness values (Ra, μm) were S, 0.13 (0.05); ERO, 0.25 (0.07); APF, 0.22 (0.08); and APF_nHAp, 0.17 (0.04). Ra values were significantly higher after ERO (p < .01) and APF (p < .05) treatments than after S. The enamel surface morphology was altered by the treatments, except for the S specimens. The mineral content of the enamel showed a clear trend with Ca and P reduction in the order of APF < S < APF_nHAp < ERO and APF < S < ERO < APF_nHAp, respectively. We can conclude that APF gel increased mineral concentration on the enamel. Moreover, the APF_nHAp material modified the composition and morphology of the enamel surface.