Femoral head diameter in the Malaysian population

Hip geometric parameters are associated with radiographic and clinical hip osteoarthritis: Findings from a cross-sectional study in UK Biobank

OBJECTIVE

To examine the extent to which geometric parameters derived from dual-energy x-ray absorptiometry (DXA) scans in the UK Biobank study are related to hip osteoarthritis (HOA) independently of sex, age and body size.

DESIGN

Femoral neck width (FNW), diameter of the femoral head (DFH) and hip axis length (HAL) were derived automatically from left hip DXA scans in UK Biobank using outline points placed around the hip by a machine-learning program. Correlations were calculated between geometric parameters, age, height, and weight. Logistic regression was used to examine the relationship of geometric parameters with radiographic HOA, hospital diagnosed HOA (HESOA), and Cox proportional hazards model to evaluate the relationship with total hip replacement (THR). Analyses were adjusted for sex, age, height, weight, and geometric parameters.

RESULTS

The study consisted of 40,312 participants. In age and sex-adjusted analyses, FNW, HAL and DFH were related to increased risk of radiographic HOA. In a model adjusted for age, sex, height, weight and other geometric parameters, both FNW and HAL retained independent relationships with radiographic HOA [FNW: odds ratios 2.38 (2.18-2.59), HAL: 1.25 (1.15-1.36)], while DFH was now protective [0.55 (0.50-0.61)]. Only FNW was independently related to HESOA [2.20 (1.80-2.68)] and THR [hazard ratios 2.51 (1.89-3.32)].

CONCLUSION

Greater FNW and HAL were independently related to an increased risk of radiographic HOA, whereas greater DFH appeared to be protective. Greater FNW was independently associated with HESOA and THR. These results suggest that DXA-derived geometric parameters, particularly FNW, could help determine HOA and THR risk.

Digital measurement and clinical significance of proximal femur in the older people of Inner Mongolia population, China

OBJECTIVE

This study aimed to measure the parameters of the proximal femur in the older people of Inner Mongolia, China and understand the influence of age and gender so as to provide guidance for the design and improvement of prosthesis for total hip arthroplasty.

METHODS

A total of 236 patients who underwent CT angiography of lower limbs in the Department of Imaging, Affiliated Hospital of Inner Mongolia Medical University of China were collected. They were divided into 4 groups according to age: < 60 (group A), 60-69 (group B), 70-79 (group C), and > 80 years (group D). Four anatomical parameters, including femoral head diameter (FHD), femoral neck-shaft angle (FNSA), femoral offset (FO), femoral neck anteversion (FNA), were measured by Mimics 21.0. Comparisons were made between age groups of the same gender and between genders in the same age group to analyze the correlation of the 4 parameters of proximal femur with age and gender. In addition, the results of this study were compared with previous studies.

RESULTS

There were no significant differences in FHD and FO between age groups, indicating no correlation with age. FNSA and FNA were no significantly different between group C and group D in the same gender, whereas there were significant differences between other age groups and were negatively correlated with age. There were significant differences in FHD and FO between genders in the same age group, with the males being larger than the females. FNSA and FNA were no significant differences between genders in the same age group.

CONCLUSIONS

FNSA and FNA decrease with age. FHD and FO were larger in males than in females in all age groups. Age and gender should be considered in the design of prosthesis.

Biomechanical comparison of the undercut thread design versus conventional buttress thread for the lag screw of the dynamic hip screw system

Objective: To compare the fixation stability of the lag screw with a undercut thread design for the dynamic hip screw (DHS) system versus the lag screw with the conventional buttress thread. Methods: The lag screws with the undercut thread (a flat crest feature, a tip-facing undercut feature) and buttress thread were both manufactured. Fixation stability was investigated using cyclic compressive biomechanical testing on custom osteoporotic femoral head sawbone. The forces required for the same vertical displacement in the two types of lag screw were collected to evaluate the resistance to migration. Varus angle was measured on X-ray images to assess the ability in preventing varus collapse. Finite element analysis (FEA) was performed to analyze the stress and strain distribution at the bone-screw interface of the two types of lag screws. Results: The biomechanical test demonstrated that the force required to achieve the same vertical displacement of the lag screw with the undercut thread was significantly larger than the lag screw with conventional buttress thread (p < 0.05). The average varus angles generated by the undercut and buttress threads were 3.38 ± 0.51° and 5.76 ± 0.38°, respectively (p < 0.05). The FEA revealed that the region of high-stress concentration in the bone surrounding the undercut thread was smaller than that surrounding the buttress thread. Conclusion: The proposed DHS system lag screw with the undercut thread had higher migration resistance and superior fixation stability than the lag screw with the conventional buttress thread.

The natural history of alpha angle in the last seventeen centuries

INTRODUCTION

Hip osteoarthritis is one of the most important and debilitating diseases affecting thousands of people all over the world. On the other hand, femoroacetabular impingement (FAI) is one of the known important causes of hip osteoarthritis. Cam deformity frequently presents in FAI showing an increased alpha angle. Increased alpha angle has been observed among young patients involved in demanding physical activities such as in sports (40-60%), whereas among the non-athletic population, increased alpha angle was observed in 15-20%. Although femoroacetabular pathology has been described over the recent years, it is not possible to determine when the angle increase actually begins prior to diagnosis. The aim of our study is to evaluate the femoral alpha angle in different human femurs in different civilization eras in West Mediterranean area.

MATERIALS AND METHODS

Available ancient femurs were selected from the Collection Center belonging to the archeological archives (ancient necropolis) from the fourth, fourteenth and eighteenth centuries. A comparison of the alpha angle was made of the measurements from the different groups accompanied by a sample of present-day femurs from the radiology database of CT scans. Data from 243 femoral bones were collected, 50 of which from the fourth century, 26 from the fourteenth century, 68 from the eighteenth century, and 99 femurs from the 20/twenty-first century.

RESULTS

Alpha angles in all historical samples showed pathological values (> 55º) up to a maximum of 11.5% of the cases. Meanwhile, the actual series showed pathological alpha angle in 60.1% of the cases with statistical significant differences.

CONCLUSION

The studied femurs of the western Mediterranean region from the fourth, fourteenth and eighteenth centuries showed pathological alpha angles in a smaller proportion than the actual sample.

LEVEL OF EVIDENCE

Level III, retrospective studies.

Use of a modular hip dual-mobility articulation in patients with high risk of dislocation: a relatively small-sized acetabulum in Asian patients may limit its use

BACKGROUND

Dual-mobility hip component is widely used in Europe and North America, because it effectively reduces hip dislocation in primary and revision total hip arthroplasties. However, reports were limited on the use of dual-mobility articulation in Asian populations.

PURPOSE

The aim of this retrospective study was to review the use of modular dual-mobility hip articulation in Asian patients with the high risk factor for hip dislocation. We also discussed the potential concern on the use of dual-mobility articulation in Asian patients.

METHODS

From Jan 2018 to June 2019, 17 patients were included in this study. The mean age of the patients was (73.8 ± 9.5) years (range: 57-88 years). The mean size of acetabular cup and modular DM liner were (49.5 ± 3.4) mm (range, 46-58 mm) and (40.7 ± 3.4) mm (range, 38-48 mm), respectively. The mean follow-up period was (15.8 ± 3.9) months (range, 11-24 months). The primary outcome was the rate of hip dislocation. The secondary outcomes included the Harris Hip Score. Differences were considered statistically significant at p < 0.05.

RESULTS

Hip dislocation, loosening, peri-prosthetic fractures, or intra-prosthetic dislocation was not found in the series. The mean preoperative and postoperative Harris Hip Scores were 42.2 ± 17.2 (range, 15-80) and 74.7 ± 13.5 (range, 52-97), respectively, giving a mean improvement of 32.5 ± 17.2 (range, 4-72). The improvement was statistically significant (p < 0.05).

CONCLUSIONS

In Asian patients with high risk of hip dislocation, the use of modular dual-mobility hip component produces promising outcomes without hip dislocation, but the relatively small-sized acetabulum may limit it widespread application in other populations worldwide.

TRIAL REGISTRATION

HKUCTR-2913 .

Radiographic study of the proximal femur morphology of elderly patients with femoral neck fractures: is there a difference among ethnic groups?

INTRODUCTION

This study aimed to determine ethnic differences in the proximal femur morphology of elderly patients with femoral neck fractures in Singapore.

METHODS

We reviewed the medical records of 101 men and 288 women aged 60-109 (mean 76.4) years who underwent hip hemiarthroplasty for femoral neck fractures between 1 June 2010 and 31 December 2015. Patients' age, gender and race were recorded. Plain anteroposterior radiography was used to measure the following: calcar width to canal width ratio of the ipsilateral femur; neck-shaft angle; hip offset; neck length; and neck width of the contralateral proximal femur.

RESULTS

Chinese women had slightly larger femoral heads (mean 43.88 mm) as compared to Malay (mean 42.92 mm, p = 0.044) and Indian (mean 42.34 mm, p = 0.025) women. Chinese women also had a significantly lower mean calcar-to-canal width ratio (0.606) as compared to Malay (0.664, p = 0.002) and Indian (0.693, p = 0.004) women. The mean neck-shaft angle of Chinese women was significantly greater than that of Indian women (137.48° vs. 127.00°, p = 0.001).

CONCLUSION

We found statistically significant differences in the femoral head sizes and calcar-to-canal width ratios among women of different ethnic groups. There were also differences in neck-shaft angles between Chinese and Indian women, and between Malay and Indian women.