Fibrous Polymer-Based Composites Obtained by Electrospinning for Bone Tissue Engineering

Currently, the significantly developing fields of tissue engineering related to the fabrication of polymer-based materials that possess microenvironments suitable to provide cell attachment and promote cell differentiation and proliferation involve various materials and approaches. Biomimicking approach in tissue engineering is aimed at the development of a highly biocompatible and bioactive material that would most accurately imitate the structural features of the native extracellular matrix consisting of specially arranged fibrous constructions. For this reason, the present research is devoted to the discussion of promising fibrous materials for bone tissue regeneration obtained by electrospinning techniques. In this brief review, we focus on the recently presented natural and synthetic polymers, as well as their combinations with each other and with bioactive inorganic incorporations in order to form composite electrospun scaffolds. The application of several electrospinning techniques in relation to a number of polymers is touched upon. Additionally, the efficiency of nanofibrous composite materials intended for use in bone tissue engineering is discussed based on biological activity and physiochemical characteristics.

Electrospun Nanofibers of Natural and Synthetic Polymers as Artificial Extracellular Matrix for Tissue Engineering

Many types of polymer nanofibers have been introduced as artificial extracellular matrices. Their controllable properties, such as wettability, surface charge, transparency, elasticity, porosity and surface to volume proportion, have attracted much attention. Moreover, functionalizing polymers with other bioactive components could enable the engineering of microenvironments to host cells for regenerative medical applications. In the current brief review, we focus on the most recently cited electrospun nanofibrous polymeric scaffolds and divide them into five main categories: natural polymer-natural polymer composite, natural polymer-synthetic polymer composite, synthetic polymer-synthetic polymer composite, crosslinked polymers and reinforced polymers with inorganic materials. Then, we focus on their physiochemical, biological and mechanical features and discussed the capability and efficiency of the nanofibrous scaffolds to function as the extracellular matrix to support cellular function.

Blended Natural Support Materials-Collagen Based Hydrogels Used in Biomedicine

Due to their unique properties-the are biocompatible, easily accessible, and inexpensive with programmable properties-biopolymers are used in pharmaceutical and biomedical research, as well as in cosmetics and food. Collagen is one of the most-used biomaterials in biomedicine, being the most abundant protein in animals with a triple helices structure, biocompatible, biomimetic, biodegradable, and hemostatic. Its disadvantages are its poor mechanical and thermal properties and enzymatic degradation. In order to solve this problem and to use its benefits, collagen can be used blended with other biomaterials such as alginate, chitosan, and cellulose. The purpose of this review article is to offer a brief paper with updated information on blended collagen-based formulations and their potential application in biomedicine.

Effect of Porous Chitosan Microspheres Loaded with Platelet-Rich Plasma and Bone Marrow-Derived Mesenchymal Stem Cells on Regeneration of Tibia Defect

Objective. Repair of bone defects represents a grave clinical challenge because of the tremendous difficulties in the recovery of bone function and regeneration of bone loss. Therefore, we investigated the effects of platelet-rich plasma-loaded (PRP) porous chitosan microspheres (PCMs) on the differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) and the proliferation and differentiation potential of BMSCs loaded by PCMs in vitro. We also established the model of bone defect repair in rat tibia to further explore the effects of PCMs loaded with PRP and BMSCs on bone regeneration. Methods. MTT assay was used to detect the proliferative ability of BMSCs after hypoxia/reoxygenation (H/R) treatment and the proliferative ability of BMSCs loaded by PCMs; polymerase chain reaction (PCR) was used to detect the expression of alkaline phosphatase (ALP), type I collagen (Col I), and type II collagen (Col II) in BMSCs after hypoxia and in BMSCs induced by PRP-loaded PCMs; PCR was used to detect the expression of Runt-associated transcription factor 2 (Runx2) and osteocalcin (OC) in the newly generated bone tissue; micro-CT scanning was applied to measure the bone mineral density and bone volume of the newly generated bone tissue in rats. Results. BMSCs still have the normal potential of proliferation and differentiation after H/R treatment. PCMs can provide a larger surface for the attachment of BMSCs, facilitating cell proliferation. Loaded by PCMs, PRP can be slowly released, effectively stimulating the differentiation of BMSCs. PCM/PRP/BMSC composites increased the expression levels of Runx2 and OC in the newly generated bone in rat tibia defect and the bone mineral density. Moreover, the composites improved the rate of regenerated bone volume. Conclusion. The application of PCM/PRP/BMSC composites is promising in the repair of tibia defects.

Effects of a bone graft substitute consisting of porous gradient HA/ZrO2 and gelatin/chitosan slow-release hydrogel containing BMP-2 and BMSCs on lumbar vertebral defect repair in rhesus monkey

Dense biomaterial plays an important role in bone replacement. However, it fails to induce bone cell migration into graft material. In the present study, a novel bone graft substitute (BGS) consisting of porous gradient hydroxyapatite/zirconia composite (PGHC) and gelatin/chitosan slow-release hydrogel containing bone morphogenetic protein 2 and bone mesenchymal stem cells was designed and prepared to repair lumbar vertebral defects. The morphological characteristics of the BGS evaluated by a scanning electron microscope showed that it had a three-dimensional network structure with uniformly distributed chitosan microspheres on the surfaces of the graft material and the interior of the pores. Then, BGS (Group A), PGHC (Group B), or autologous bone (Group C) was implanted into lumbar vertebral body defects in a total of 24 healthy rhesus monkeys. After 8 and 16 weeks, anteroposterior and lateral radiographs of the lumbar spine, microcomputed tomography, histomorphometry, biomechanical testing, and biochemical testing for bone matrix markers, including Type I collagen, osteocalcin, osteopontin, basic fibroblast growth factor, alkaline phosphatase, and vascular endothelial growth factor, were performed to examine the reparative efficacy of the BGS and PGHC. The BGS displayed excellent ability to repair the lumbar vertebral defect in rhesus monkeys. Radiography, microcomputed tomography scanning, and histomorphological characterization showed that the newly formed bone volume in the interior of the pores in the BGS was significantly higher than in the PGHC. The results of biomechanical testing indicated that the vertebral body compression strength of the PGHC implant was lower than the other implants. Reverse-transcription polymerase chain reaction and western blot analyses showed that the expression of bone-related proteins in the BGS implant was significantly higher than in the PGHC implant. The BGS displayed reparative effects similar to autologous bone. Therefore, BGS use in vertebral bone defect repair appears promising.

Biodegradable ceramic-polymer composites for biomedical applications: A review

The present work focuses on the state-of-the-art of biodegradable ceramic-polymer composites with particular emphasis on influence of various types of ceramic fillers on properties of the composites. First, the general needs to create composite materials for medical applications are briefly introduced. Second, various types of polymeric materials used as matrices of ceramic-containing composites and their properties are reviewed. Third, silica nanocomposites and their material as well as biological characteristics are presented. Fourth, different types of glass fillers including silicate, borate and phosphate glasses and their effect on a number of properties of the composites are described. Fifth, wollastonite as a composite modifier and its effect on composite characteristics are discussed. Sixth, composites containing calcium phosphate ceramics, namely hydroxyapatite, tricalcium phosphate and biphasic calcium phosphate are presented. Finally, general possibilities for control of properties of composite materials are highlighted.

Osteogenic differentiation of human mesenchymal stem cells in freeze-gelled chitosan/nano β-tricalcium phosphate porous scaffolds crosslinked with genipin

The objective of this work was to investigate material properties and osteogenic differentiation of human mesenchymal stem cells (hMSCs) in genipin (GN) crosslinked chitosan/nano β-tricalcium phosphate (CS/nano β-TCP) scaffolds, and compare the results with tripolyphosphate (TPP) crosslinked scaffolds. Porous crosslinked CS/nano β-TCP scaffolds were produced by freeze-gelation using GN (CBG scaffold) and TPP (CBT scaffold) as crosslinkers. The prepared CBT and CBG scaffolds were characterized with respect to porosity, pore size, water content, wettability, compressive strength, mass loss, and osteogenic differentiation of hMSCs. All scaffolds displayed interconnected honeycomb-like microstructures. There was a significant difference between the average pore size, porosity, contact angle, and percent swelling of CBT and CBG scaffolds. The average pore size of CBG scaffolds was higher than CBT, the porosity of CBG was lower than CBT, the water contact angle of CBG was higher than CBT, and the percent swelling of CBG was lower than CBT. At a given crosslinker concentration, there was not a significant difference in compressive modulus and mass loss of CBG and CBT scaffolds. Metabolic activity of hMSCs seeded in CBG scaffolds was slightly higher than CBT. Furthermore, CBG scaffolds displayed slightly higher extent of mineralization after 21 days of incubation in osteogenic medium compared to CBT.

Controlled formation of cross-linked collagen fibers for neural tissue engineering applications

Fibrous scaffolds engineered to direct the growth of tissues can be important in forming architecturally functional tissue such as aligning regenerating nerves with their target. Collagen is a commonly used substrate used for neuronal growth applications in the form of surface coatings and hydrogels. The wet spinning technique can create collagen fibers without the use of organic solvents and is typically accomplished by extruding a collagen dispersion into a coagulation bath. To create well-controlled and uniform collagen fibers, we developed an automatic wet spinning device with precise control over the spinning and fiber collection parameters. A fiber collection belt allowed the continuous formation of very soft and delicate fibers up to half a meter in length. Wet-spun collagen fibers were characterized by tensile and thermal behavior, diameter uniformity, the swelling response in phosphate buffered saline and their biocompatibility with dorsal root ganglion (DRG) neurons and Schwann cells. Fibers formed from 0.75% weight by volume (w/v) collagen dispersions formed the best fibers in terms of tensile behavior and fiber uniformity. Fibers post-treated with the cross-linkers glutaraldehyde and genipin exhibited increased mechanical stability and reduced swelling. Importantly, genipin-treated fibers were conducive to DRG neurons and Schwann cell survival and growth, which validated the use of this cross-linker for neural tissue engineering applications.