Engineered collagen-PEO nanofibers and fabrics

Design of Collagen and Gelatin-based Electrospun Fibers for Biomedical Purposes: An Overview

Collagen and gelatin are essential natural biopolymers commonly utilized in biomaterials and tissue engineering because of their excellent physicochemical and biocompatibility properties. They can be used either in combination with other biomacromolecules or particles or even exclusively for the enhancement of bone regeneration or for the development of biomimetic scaffolds. Collagen or gelatin derivatives can be transformed into nanofibrous materials with porous micro- or nanostructures and superior mechanical properties and biocompatibility using electrospinning technology. Specific attention was recently paid to electrospun mats of such biopolymers, due to their high ratio of surface area to volume, as well as their biocompatibility, biodegradability, and low immunogenicity. The fiber mats with submicro- and nanometer scale can replicate the extracellular matrix structure of human tissues and organs, making them highly suitable for use in tissue engineering due to their exceptional bioaffinity. The drawbacks may include rapid degradation and complete dissolution in aqueous media. The use of gelatin/collagen electrospun nanofibers in this form is thus greatly restricted for biomedicine. Therefore, the cross-linking of these fibers is necessary for controlling their aqueous solubility. This led to enhanced biological characteristics of the fibers, rendering them excellent options for various biomedical uses. The objective of this review is to highlight the key research related to the electrospinning of collagen and gelatin, as well as their applications in the biomedical field. The review features a detailed examination of the electrospinning fiber mats, showcasing their varying structures and performances resulting from diverse solvents, electrospinning processes, and cross-linking methods. Judiciously selected examples from literature will be presented to demonstrate major advantages of such biofibers. The current developments and difficulties in this area of research are also being addressed.

Comparison of the mechanical characteristics of produced nanofibers by electrospinning process based on different collectors

Polymer nanofiber in nanofibrous membrane produced by electrospinning process can be employed in various fields such as medical engineering, environmental engineering, biotechnology, energy, tissue scaffolds, and protective clothing. In these applications, the mechanical properties of the nanofibrous membrane should be studied to get long-life durability. In the current study, nanofibers are obtained from electrospinning of polyacrylonitrile (PAN) solution in Dimethylformamide (DFM) solvent. Nanofibers are produced with disc, cylinder, wire drum, parallel bars and polygon collectors and their mechanical properties are examined and compared. For this study, a tensile testing machine with special jaws was applied. According to the Scanning Electron Microscope (SEM) images, the average diameter of the produced nanofibers ranges from 300 to 340 nm. In addition, nanofiber layers have a thickness of 0.03 mm. They were cut in the 10 × 25 mm2 size; then, the tensile test was performed. Results show that produced nanofiber layers by rotating cylinder collector have the highest ultimate strength while the disk collector results in the highest Young's modulus in produced samples.

Overview of Electrospinning for Tissue Engineering Applications

Tissue engineering (TE) is an emerging field of study that incorporates the principles of biology, medicine, and engineering for designing biological substitutes to maintain, restore, or improve tissue functions with the goal of avoiding organ transplantation. Amongst the various scaffolding techniques, electrospinning is one of the most widely used techniques to synthesise a nanofibrous scaffold. Electrospinning as a potential tissue engineering scaffolding technique has attracted a great deal of interest and has been widely discussed in many studies. The high surface-to-volume ratio of nanofibres, coupled with their ability to fabricate scaffolds that may mimic extracellular matrices, facilitates cell migration, proliferation, adhesion, and differentiation. These are all very desirable properties for TE applications. However, despite its widespread use and distinct advantages, electrospun scaffolds suffer from two major practical limitations: poor cell penetration and poor load-bearing applications. Furthermore, electrospun scaffolds have low mechanical strength. Several solutions have been offered by various research groups to overcome these limitations. This review provides an overview of the electrospinning techniques used to synthesise nanofibres for TE applications. In addition, we describe current research on nanofibre fabrication and characterisation, including the main limitations of electrospinning and some possible solutions to overcome these limitations.

Electrospinning of collagen: enzymatic and spectroscopic analyses reveal solvent-independent disruption of the triple-helical structure

Electrospinning has become a well-established method for creating nanofibrous meshes for tissue-engineering applications. The incorporation of natural extracellular components, such as electrospun pure collagen nanofibers, has proven to be particularly challenging, as electrospun collagen nanofibers do not constitute native collagen fibers anymore. In this study, we show that this detrimental effect is not only limited to fluorinated solvents, as previously thought. Rat tail collagen was dissolved in acetic acid and ethanol and electrospun at various temperatures. Electrospun collagen mats were analyzed using circular dichroism, enzymatic digestion, SDS-PAGE, western blotting, and Raman spectroscopy and compared to heat-denaturated and electrospun collagen in HFIP. Our data suggest that even non-fluorinated electrospinning solvents, such as acid-based solvents, do not yield structurally intact fibers. Interestingly, neither epithelial cells nor fibroblasts displayed a different cellular response to electrospun collagen compared to collagen-coated polyurethane scaffolds in F-actin staining and metabolic analysis using fluorescent lifetime imaging. The disruption of the structural integrity of collagen might therefore be underestimated based on the cell-material interactions alone. These observations expose the larger than anticipated vulnerability of collagen in the electrospinning process. Based on these findings, the influence of the electrospinning process on the distinct biochemical properties of collagen should always be considered, when ECM-mimicking fibrous constructs are manufactured.

Solvent-Free Direct PEGylation of Collagen Fibers

The addition of poly(ethylene glycol) (PEG) to biomolecules and biomaterials is a well-established approach to modify their properties for therapeutic applications. For biomaterials, the approach is typically to blend or electrospray the synthetic polymer with the biomaterial. Effective surface modification approaches such as surface-initiated polymer brushes are challenging since the harsh solvents required for brush synthesis may destroy the biomaterial. Herein, we describe the PEGylation of collagen fibers by surface-initiated PEG brushes using a living anionic grafting-from mechanism. This brush synthesis is done in the absence of solvents to minimize the degradation of the native collagen structure. We quantify the effect the brush synthesis has on the native structure of the collagen fiber using differential scanning calorimetry (DSC) and find that even at long reaction times a significant fraction of the native structure remains. Dynamic mechanical analysis indicates the collagen undergoes only modest structural degradation, while adhesion studies find a significant improvement of antifouling properties. Further, our approach opens the way for further chemistry, as the growing polymer chain is a potassium alkoxy group that can be functionalized by termination or by subsequent reaction by a wide variety of molecules.

Valorization of Fish Waste: Isolation and Characterization of Acid- and Pepsin-Soluble Collagen from the Scales of Mediterranean Fish and Fabrication of Collagen-Based Nanofibrous Scaffolds

In search of alternative and sustainable sources of collagenous materials for biomedical applications, the scales of five Mediterranean fish species-fished in high tonnage in the Mediterranean region since they represent popular choices for the local diet-as well as those of the Atlantic salmon for comparison purposes, were comparatively studied for their acid- and pepsin-soluble collagen content. Fish scales that currently represent a discarded biomass of no value could be efficiently exploited for the production of a high added-value biomaterial. The isolated collagenous materials, which showed the typical electrophoretic patterns of type I collagen, were morphologically and physicochemically characterized. Using scanning electron microscopy the fibrous morphology of the isolated collagens was confirmed, while the hydroxyproline content, in conjunction with infrared spectroscopy and X-ray diffraction studies verified the characteristic for collagen amino acid profile and its secondary structure. The acid- and pepsin-soluble collagens isolated from the fish scales were blended with the bioactive sulfated marine polysaccharide ulvan and polyethylene oxide and electrospun to afford nanofibrous scaffolds that could find applications in the biomedical sector.

Fabrication of Polysaccharide-Based Halochromic Nanofibers via Needle-Less Electrospinning and Their Characterization: A Study of the Leaching Effect

Responsive materials, i.e., smart materials, have the ability to change their physical or chemical properties upon certain external signals. The development of nanofibrous halochromic materials, specifically combining the pH-sensitive functionality and unique nanofiber properties, could yield interesting new applications, especially when the common problem of dye leaching is successfully tackled. Therefore, in this article, we studied the fabrication process of polysaccharide-based halochromic nanofibrous materials by using a combination of various halochromic dyes (bromothymol blue, bromocresol green, and thymol blue) and cellulose acetate in a spinning solution using a one-pot strategy. The inhibition of leaching was addressed by using a complexing agent: poly-diallyl-dimethylammonium chloride (PDADMAC). The preparation of hybrid spinning solutions, their characterization, and ability to form continuous nanofibers were studied using a high production needle-less electrospinning system. The produced hybrid solutions and nanofibers were characterized, in terms of their rheological properties, chemical structure, morphology, and functionality. Fabricated nanofibrous halochromic structures show a clear color change upon exposure to different pH values, as well as the reduced leaching of dyes, upon the addition of a complexing agent. The leaching decreased by 61% in the case of bromocresol green, while, in the case of bromothymol blue and thymol blue, the leaching was reduced by 95 and 99%, respectively.

Electrospun alginate mats embedding silver nanoparticles with bioactive properties

Polysaccharide-based composites embedding silver nanoparticles (AgNPs) represent a promising alternative to common antimicrobial materials because of the effective, broad-spectrum biocidal properties of AgNPs combined with the biocompatibility and environmental safety of the naturally occurring polymeric component. In this work, AgNPs stabilized with alginate chains (Alg@AgNPs) were successfully synthesized in situ within the polysaccharide solution through a wet chemical approach carried out at different concentrations of the silver salt precursor. Once obtained, the aqueous suspensions were electrospun to prepare non-woven membranes, showing a homogeneous nanostructured texture (with fiber diameter between 100 and 150 nm), which was found to be influenced by the size (between 20 and 35 nm) of the embedded metal nanoparticles. The biocidal potential of the nanocomposite mats was preliminarily tested against Gram-negative E. coli. The results showed that the antimicrobial response of the investigated samples occurred within a day of incubation and can be observed for AgNPs content in the polysaccharide fibers far below the nanomolar regime.

Nanobiotechnology: Applications in Chronic Wound Healing

Wounds occur when skin integrity is broken and the skin is damaged. With progressive changes in the disease spectrum, the acute wounds caused by mechanical trauma have been become less common, while chronic wounds triggered with aging, diabetes and infection have become more frequent. Chronic wounds now affect more than 6 million people in the United States, amounting to 10 billion dollars in annual expenditure. However, the treatment of chronic wounds is associated with numerous challenges. Traditional remedies for chronic wounds include skin grafting, flap transplantation, negative-pressure wound therapy, and gauze dressing, all of which can cause tissue damage or activity limitations. Nanobiotechnology — which comprises a diverse array of technologies derived from engineering, chemistry, and biology — is now being applied in biomedical practice. Here, we review the design, application, and clinical trials for nanotechnology-based therapies for chronic wound healing, highlighting the clinical potential of nanobiotechnology in such treatments. By summarizing previous nanobiotechnology studies, we lay the foundation for future wound care via a nanotech-based multifunctional smart system.

Antimicrobial Nitric Oxide-Releasing Electrospun Dressings for Wound Healing Applications

Nonhealing and chronic wounds represent a major problem for the quality of life of patients and have cost implications for healthcare systems. The pathophysiological mechanisms that prevent wound healing are usually multifactorial and relate to patient overall health and nutrition, vascularity of the wound bed, and coexisting infection/colonization. Bacterial infections are one of the predominant issues that can stall a wound, causing it to become chronic. Successful wound healing often depends on weeks or months of antimicrobial therapy, but this is problematic given the rise in multidrug-resistant bacteria. As such, alternatives to antibiotics are desperately needed to aid the healing of chronic, and even acutely infected wounds. Nitric oxide (NO) kills bacteria through a variety of mechanisms, and thus, bacteria have shown no tendency to develop resistance to NO as a therapeutic agent and therefore can be a good alternative to antibiotic therapy. In this paper, we report on the development of NO-releasing electrospun membranes fabricated from polycaprolactone (PCL)/gelatin blends and optimized to reduce bacterial infection. The NO payload in the membranes was directly related to the number of amines (and hence the amount of gelatin) in the blend. Higher NO payloads corresponded with a higher degree of antimicrobial efficacy. No cytotoxicity was observed for electrospun membranes, and an in vitro wound closure assay demonstrated closure within 16 h. The results presented here clearly indicate that these NO-releasing electrospun membranes hold significant promise as wound dressings due to their antimicrobial activity and biocompatibility.

Electrospun Nanofibers for Bone Regeneration: From Biomimetic Composition, Structure to Function

In recent years, a variety of novel materials and processing technologies have been developed to prepare tissue engineering scaffolds for bone defect repair. Among them, nanofibers fabricated via electrospinning technology...

Temperature Dependence of Conformational Relaxation of Poly(ethylene oxide) Melts

The time-temperature superposition (TTS) principle, employed extensively for the analysis of polymer dynamics, is based on the assumption that the different normal modes of polymer chains would experience identical temperature dependence. We aim to test the critical assumption for TTS principle by investigating poly(ethylene oxide) (PEO) melts, which have been considered excellent solid polyelectrolytes. In this work, we perform all-atom molecular dynamics simulations up to 300 ns at a range of temperatures for PEO melts. We find from our simulations that the conformations of strands of PEO chains in melts show ideal chain statistics when the strand consists of at least 10 monomers. At the temperature range of T= 400 to 300 K, the mean-square displacements (⟨Δr2(t)⟩) of the centers of mass of chains enter the Fickian regime, i.e., ⟨Δr2(t)⟩∼t1. On the other hand, ⟨Δr2(t)⟩ of the monomers of the chains scales as ⟨Δr2(t)⟩∼t1/2 at intermediate time scales as expected for the Rouse model. We investigate various relaxation modes of the polymer chains and their relaxation times (τn), by calculating for each strand of n monomers. Interestingly, different normal modes of the PEO chains experience identical temperature dependence, thus indicating that the TTS principle would hold for the given temperature range.

Elemental Selenium Enriched Nanofiber Production

This study aimed to produce electrospun nanofibers from a polyvinyl butyral polymer (PVB) solution enriched with red and grey selenium nanoparticles. Scanning electron microscopic analysis was used to observe the samples, evaluate the fiber diameters, and reveal eventual artifacts in the nanofibrous structure. Average fiber diameter is determined by manually measuring the diameters of randomly selected fibers on scanning electron microscopic (SEM) images. The obtained nanofibers are amorphous with a diameter of approximately 500 nm, a specific surface area of approx. 8 m² g⁻¹, and 5093 km cm⁻³ length. If the red and grey selenium nanoparticles were produced in powder form and suspended to the ethanolic solution of PVB then they were located inside and outside the fiber. When selenium nanoparticles were synthesized in the PVB solution, then they were located only inside the fiber. These nanofiber sheets enriched with selenium nanoparticles could be a good candidate for high-efficiency filter materials and medical applications.

Drug-Eluting Medical Textiles: From Fiber Production and Textile Fabrication to Drug Loading and Delivery

Drug-eluting medical textiles have recently gained great attention to be used in different applications due to their cost effectiveness and unique physical and chemical properties. Using various fiber production and textile fabrication technologies, fibrous constructs with the required properties for the target drug delivery systems can be designed and fabricated. This review summarizes the current advances in the fabrication of drug-eluting medical textiles. Different fiber production methods such as melt-, wet-, and electro-spinning, and textile fabrication techniques such as knitting and weaving are explained. Moreover, various loading processes of bioactive agents to obtain drug-loaded fibrous structures with required physicochemical and morphological properties, drug delivery mechanisms, and drug release kinetics are discussed. Finally, the current applications of drug-eluting fibrous systems in wound care, tissue engineering, and transdermal drug delivery are highlighted.

Preparation and Applications of Electrospun Optically Transparent Fibrous Membrane

The optically transparent electrospun fibrous membrane has been widely used in many fields due to its simple operation, flexible design, controllable structure, high specific surface area, high porosity, and unique excellent optical properties. This paper comprehensively summarizes the preparation methods and applications of an electrospun optically transparent fibrous membrane in view of the selection of raw materials and structure modulation during preparation. We start by the factors that affect transmittance among different materials and explain the light transmission mechanism of the fibrous membrane. This paper also provides an overview of the methods to fabricate a transparent nanofibrous membrane based on the electrospinning technology including direct electrospinning, solution treatment after electrospinning, heat treatment after electrospinning, and surface modification after electrospinning. It further summarizes the differences in the processes and mechanisms between different transparent fibrous membranes prepared by different methods. Additionally, we study the utilization of transparent as-spun membranes as flexible functional materials, namely alcohol dipstick, air purification, self-cleaning materials, biomedicine, sensors, energy and optoelectronics, oil-water separation, food packaging, anti-icing coating, and anti-corrosion materials. It demonstrates the high transparency of the nanofibers' effects on the applications as well as upgrades the product performance.

Advances in biofabrication techniques for collagen-based 3D in vitro culture models for breast cancer research

Collagen is the most abundant component of the extracellular matrix (ECM), therefore it represents an ideal biomaterial for the culture of a variety of cell types. Recently, collagen-based scaffolds have shown promise as 3D culture platforms for breast cancer-based research. Two-dimensional (2D) in vitro culture models, while useful for gaining preliminary insights, are ultimately flawed as they do not adequately replicate the tumour microenvironment. As a result, they do not facilitate proper 3D cell-cell/cell-matrix interactions and often an exaggerated response to therapeutic agents occurs. The ECM plays a crucial role in the development and spread of cancer. Alterations within the ECM have a significant impact on the pathogenesis of cancer, the initiation of metastasis and ultimate progression of the disease. 3D in vitro culture models that aim to replicate the tumour microenvironment have the potential to offer a new frontier for cancer research with cell growth, morphology and genetic properties that more closely match in vivo cancers. While initial 3D in vitro culture models used in breast cancer research consisted of simple hydrogel platforms, recent advances in biofabrication techniques, including freeze-drying, electrospinning and 3D bioprinting, have enabled the fabrication of biomimetic collagen-based platforms that more closely replicate the breast cancer ECM. This review highlights the current application of collagen-based scaffolds as 3D in vitro culture models for breast cancer research, specifically for adherence-based scaffolds (i.e. matrix-assisted). Finally, the future perspectives of 3D in vitro breast cancer models and their potential to lead to an improved understanding of breast cancer diagnosis and treatment are discussed.

Evaluation of Novel Glycerol/PEO Gel Polymer Electrolytes for Non-Toxic Dye-Sensitized Solar Cells with Natural Dyes Regarding Long-Term Stability and Reproducibility

Alongside efficiency, long-term stability of dye-sensitized solar cells (DSSCs) is a key factor regarding their commercialization. One suitable and cost-effective method to increase the long-term stability is to prevent leakage and evaporation of the electrolyte by gelling it with polymers such as poly(ethylene oxide) (PEO) and gaining a gel polymer electrolyte (GPE). In this study, a GPE based on PEO and glycerol is investigated for the first time as electrolyte for environmentally friendly DSSCs with natural dyes. To evaluate the novel glycerol/PEO GPE, the ionic conductivity and resulting efficiency progressions of DSSCs were measured for 75 days. Different molecular weights (MWs) of PEO and blending with poly(vinylidene fluoride) (PVDF) had negligible impact on efficiencies. 17 wt% PEO was found to be more suitable than lower concentrations and resulted in a relatively high efficiency over 75 days. A glycerol electrolyte without PEO had higher ionic conductivity and achieved higher efficiencies as well but leaked from the unsealed DSSCs. In addition, the reproducibility was examined especially, which appeared to be reduced by considerable differences between identical DSSCs and between measurements of the same DSSC at different times. This emphasizes the relevance of studying multiple DSSC per sample to ensure reliable results.

Long-Term Stability Improvement of Non-Toxic Dye-Sensitized Solar Cells via Poly(ethylene oxide) Gel Electrolytes for Future Textile-Based Solar Cells

To overcome the long-term stability problems of dye-sensitized solar cells (DSSC) due to solvent evaporation and leakage, gelling the electrolyte with polymers is an appropriate option. Especially for future applications of textile-based DSSCs, which require cost-effective and environmentally friendly materials, such an improvement of the electrolyte is necessary. Therefore, the temporal progressions of efficiencies and fill factors of non-toxic glass-based DSSCs resulting from different gel electrolytes with poly(ethylene oxide) (PEO) are investigated over 52 days comparatively. Dimethyl sulfoxide (DMSO) proved to be a suitable non-toxic solvent for the proposed gel electrolyte without ionic liquids. A PEO concentration of 17.4 wt% resulted in an optimal compromise with a relatively high efficiency over the entire period. Lower concentrations resulted in higher efficiencies during the first days but in a poorer long-term stability, whereas a higher PEO concentration resulted in an overall lower efficiency. Solvent remaining in the gel electrolyte during application was found advantageous compared to previous solvent evaporation. In contrast to a commercial liquid electrolyte, the long-term stability regarding the efficiency was improved successfully with a similar fill factor and thus equal quality.

Preparation and Characterization of Electrospun Collagen Based Composites for Biomedical Applications

Electrospinning is a widely used technology for obtaining nanofibers from synthetic and natural polymers. In this study, electrospun mats from collagen (C), polyethylene terephthalate (PET) and a blend of the two (C-PET) were prepared and stabilized through a cross-linking process. The aim of this research was to prepare and characterize the nanofiber structure by Fourier-transform infrared with attenuated total reflectance spectroscopy (FTIR-ATR) in close correlation with dynamic vapor sorption (DVS). The studies indicated that C-PET nanofibrous mats shows improved mechanical properties compared to collagen samples. A correlation between morphological, structural and cytotoxic proprieties of the studied samples were emphasized and the results suggest that the prepared nanofiber mats could be a promising candidate for tissue-engineering applications, especially dermal applications.

Elastin-Based Materials: Promising Candidates for Cardiac Tissue Regeneration

Stroke and cardiovascular episodes are still some of the most common diseases worldwide, causing millions of deaths and costing billions of Euros to healthcare systems. The use of new biomaterials with enhanced biological and physical properties has opened the door to new approaches in cardiovascular applications. Elastin-based materials are biomaterials with some of the most promising properties. Indeed, these biomaterials have started to yield good results in cardiovascular and angiogenesis applications. In this review, we explore the latest trends in elastin-derived materials for cardiac regeneration and the different possibilities that are being explored by researchers to regenerate an infarcted muscle and restore its normal function. Elastin-based materials can be processed in different manners to create injectable systems or hydrogel scaffolds that can be applied by simple injection or as patches to cover the damaged area and regenerate it. Such materials have been applied to directly regenerate the damaged cardiac muscle and to create complex structures, such as heart valves or new bio-stents that could help to restore the normal function of the heart or to minimize damage after a stroke. We will discuss the possibilities that elastin-based materials offer in cardiac tissue engineering, either alone or in combination with other biomaterials, in order to illustrate the wide range of options that are being explored. Moreover, although tremendous advances have been achieved with such elastin-based materials, there is still room for new approaches that could trigger advances in cardiac tissue regeneration.

Functional Nanofibrous Biomaterials of Tailored Structures for Drug Delivery-A Critical Review

Nanofibrous biomaterials have huge potential for drug delivery, due to their structural features and functions that are similar to the native extracellular matrix (ECM). A wide range of natural and polymeric materials can be employed to produce nanofibrous biomaterials. This review introduces the major natural and synthetic biomaterials for production of nanofibers that are biocompatible and biodegradable. Different technologies and their corresponding advantages and disadvantages for manufacturing nanofibrous biomaterials for drug delivery were also reported. The morphologies and structures of nanofibers can be tailor-designed and processed by carefully selecting suitable biomaterials and fabrication methods, while the functionality of nanofibrous biomaterials can be improved by modifying the surface. The loading and releasing of drug molecules, which play a significant role in the effectiveness of drug delivery, are also surveyed. This review provides insight into the fabrication of functional polymeric nanofibers for drug delivery.

Bio-inspired human in vitro outer retinal models: Bruch's membrane and its cellular interactions

Retinal degenerative disorders, such as age-related macular degeneration (AMD), are one of the leading causes of blindness worldwide, however, treatments to completely stop the progression of these debilitating conditions are non-existent. Researchers require sophisticated models that can accurately represent the native structure of human retinal tissue to study these disorders. Current in vitro models used to study the retina are limited in their ability to fully recapitulate the structure and function of the retina, Bruch's membrane and the underlying choroid. Recent developments in the field of induced pluripotent stem cell technology has demonstrated the capability of retinal pigment epithelial cells to recapitulate AMD-like pathology. However, such studies utilise unsophisticated, bio-inert membranes to act as Bruch's membrane and support iPSC-derived retinal cells. This review presents a concise summary of the properties and function of the Bruch's membrane-retinal pigment epithelium complex, the initial pathogenic site of AMD as well as the current status for materials and fabrication approaches used to generate in vitro models of this complex tissue. Finally, this review explores required advances in the field of in vitro retinal modelling. STATEMENT OF SIGNIFICANCE: Retinal degenerative disorders such as age-related macular degeneration are worldwide leading causes of blindness. Previous attempts to model the Bruch's membrane-retinal pigment epithelial complex, the initial pathogenic site of age-related macular degeneration, have lacked the sophistication to elucidate valuable insights into disease mechanisms. Here we provide a detailed account of the morphological, physical and chemical properties of Bruch's membrane which may aid the fabrication of more sophisticated and physiologically accurate in vitro models of the retina, as well as various fabrication techniques to recreate this structure. This review also further highlights some recent advances in some additional challenging aspects of retinal tissue modelling including integrated fluid flow and photoreceptor alignment.

Electrospinning Live Cells Using Gelatin and Pullulan

Electrospinning is a scaffold production method that utilizes electric force to draw a polymer solution into nanometer-sized fibers. By optimizing the polymer and electrospinning parameters, a scaffold is created with the desired thickness, alignment, and pore size. Traditionally, cells and biological constitutes are implanted into the matrix of the three-dimensional scaffold following electrospinning. Our design simultaneously introduces cells into the scaffold during the electrospinning process at 8 kV. In this study, we achieved 90% viability of adipose tissue-derived stem cells through electrospinning.

Silk fibroin nanofibrous mats for visible sensing of oxidative stress in cutaneous wounds

Amplex red infused silk mats in visible detection of oxidative stress in the cutaneous wound over time.

A Critical Review on the Production of Electrospun Nanofibres for Guided Bone Regeneration in Oral Surgery

Nanofibre-based membranes or scaffolds exhibit high surface-to-volume ratio, which allows an improved cell adhesion, representing an attractive subgroup of biomaterials due to their unique properties. Among several techniques of nanofiber production, electrospinning is a cost-effective technique that has been, to date, attractive for several medical applications. Among these, guided bone regeneration is a surgical procedure in which bone regeneration, due to bone atrophy following tooth loss, is "guided" by an occlusive barrier. The membrane should protect the initial blood clot from any compression, shielding the bone matrix during maturation from infiltration of soft tissues cells. This review will focus its attention on the application of electrospinning (ELS) in oral surgery bone regeneration. Despite the abundance of published papers related to the electrospinning technique applied in the field of bone regeneration of the jaws, to the authors' knowledge, no articles report clinical application of these structures. Moreover, only a few records can be found with in vivo application. Therefore, no human studies have to date been detectable. New approaches such as multifunctional multilayering and coupling with bone promoting factors or antimicrobial agents, makes this technology very attractive. However, greater efforts should be made by researchers and companies to turn these results into clinical practice.

Substance P-loaded electrospun small intestinal submucosa/poly(ε-caprolactone)-ran-poly(l-lactide) sheet to facilitate wound healing through MSC recruitment

In this work, we prepared an electrospun small intestinal submucosa/poly(ε-caprolactone)-ran-poly(l-lactide) (SIS/PCLA) sheet onto which substance P (SP) was loaded, and this was employed as a cell-free scaffold for wound healing through the mobilization of human mesenchymal stem cells (hMSCs). SP release from the SP-loaded scaffold was 42% at 12 h and 51% at 24 h due to an initial burst of SP, but after 1 day, it exhibited a linear release profile and was released at a sustained rate for 21 days. The SP-loaded SIS/PCLA sheet exhibited higher in vitro and in vivo hMSC migration than did the PCLA and SIS/PCLA sheets. Large hMSCs injected into the tail vein of mice models migrated towards the wound to a greater extent in the presence of the SP-loaded SIS/PCLA sheet than with the PCLA and SIS/PCLA sheets, as confirmed by the CD44 and CD29 markers of recruited hMSCs. In animal wound models, significantly higher wound contraction (∼97%) in the group treated with the SP-loaded SIS/PCLA sheet was observed compared with the PCLA (∼74%) and SIS/PCLA (∼84%) groups at 3 weeks. In addition, SP-loaded SIS/PCLA-treated animals showed significant epidermal regeneration and collagen density (56%) in the mature granulation tissue at 3 weeks compared to the PCLA and SIS/PCLA groups. The wound area after SP-loaded SIS/PCLA sheet treatment also showed high blood vessel formation at the early stage, resulting in enhanced wound healing. Furthermore, the SP-loaded SIS/PCLA group exhibited a lower macrophage count (2.9%) than did the PCLA (7.7%) and SIS/PCLA (3.4%) groups. It was thus confirmed that the use of SP-loaded SIS/PCLA sheet as a cell-free scaffold could effectively enhance wound healing through MSC recruitment.

Fabrication of Guar-Only Electrospun Nanofibers by Exploiting a High- and Low-Molecular Weight Blend

We present a facile approach to electrospin nanofibers of guar galactomannan by blending high- and low-molecular weights (MWs) of guar. We discover that while neither native high MW guar nor hydrolyzed low MW guar is electrospinnable on its own, their combination leads to synergism in producing defect-free nanofibers. Such an approach of fabricating nanofibers from blending multiple MWs of the same polymer may provide an easy route to produce nanofibers of biopolymers which are typically hard to electrospin. Rheological studies reveal that a limiting amount of native guar is needed for electrospinnability, and for those systems that have the proportionate amount of native guar, there is a critical total concentration above which fibers form. Interestingly, a plot of blend viscosity versus guar concentration reveals two power-law regimes with an inflection point, above which fiber formation can be achieved akin to the behavior observed for pure (i.e., nonblend) polymers.

Effect of Silk Fibroin on Cell Viability in Electrospun Scaffolds of Polyethylene Oxide

In this study, a coating from electrospun silk fibroin was performed with the aim to modify the surface of breast implants. We evaluated the effect of fibroin on polymeric matrices of poly (ethylene oxide) (PEO) to enhance cell viability, adhesion, and proliferation of HaCaT human keratinocytes to enhance the healing process on breast prosthesis implantation. We electrospun six blends of fibroin and PEO at different concentrations. These scaffolds were characterized by scanning electron microscopy, contact angle measurements, ATR-FTIR spectroscopy, and X-ray diffraction. We obtained diverse network conformations at different combinations to examine the regulation of cell adhesion and proliferation by modifying the microstructure of the matrix to be applied as a potential scaffold for coating breast implants. The key contribution of this work is the solution it provides to enhance the healing process on prosthesis implantation considering that the use of these PEO⁻fibroin scaffolds reduced (p < 0.05) the amount of pyknotic nuclei. Therefore, viability of HaCaT human keratinocytes on PEO⁻fibroin matrices was significantly improved (p < 0.001). These findings provide a rational strategy to coat breast implants improving biocompatibility.

Interfacial fluid transport is a key to hydrogel bioadhesion

Attaching hydrogels to soft internal tissues is a key to the development of a number of biomedical devices. Nevertheless, the wet nature of hydrogels and tissues renders this adhesion most difficult to achieve and control. Here, we show that the transport of fluids across hydrogel-tissue interfaces plays a central role in adhesion. Using ex vivo peeling experiments on porcine liver, we characterized the adhesion between model hydrogel membranes and the liver capsule and parenchyma. By varying the contact time, the tissue hydration, and the swelling ratio of the hydrogel membrane, a transition between two peeling regimes is found: a lubricated regime where a liquid layer wets the interface, yielding low adhesion energies (0.1 J/m2 to 1 J/m2), and an adhesive regime with a solid binding between hydrogel and tissues and higher adhesion energies (1 J/m2 to 10 J/m2). We show that this transition corresponds to a draining of the interface inducing a local dehydration of the tissues, which become intrinsically adhesive. A simple model taking into account the microanatomy of tissues captures the transition for both the liver capsule and parenchyma. In vivo experiments demonstrate that this effect still holds on actively hydrated tissues like the liver capsule and show that adhesion can be strongly enhanced when using superabsorbent hydrogel meshes. These results shed light on the design of predictive bioadhesion tests as well as on the development of improved bioadhesive strategies exploiting interfacial fluid transport.

Biomedical Applications of Electrospun Nanofibers: Drug and Nanoparticle Delivery

The electrospinning process has gained popularity due to its ease of use, simplicity and diverse applications. The properties of electrospun fibers can be controlled by modifying either process variables (e.g., applied voltage, solution flow rate, and distance between charged capillary and collector) or polymeric solution properties (e.g., concentration, molecular weight, viscosity, surface tension, solvent volatility, conductivity, and surface charge density). However, many variables affecting electrospinning are interdependent. An optimized electrospinning process is one in which these parameters remain constant and continuously produce nanofibers consistent in physicochemical properties. In addition, nozzle configurations, such as single nozzle, coaxial, multi-jet electrospinning, have an impact on the fiber characteristics. The polymeric solution could be aqueous, a polymeric melt or an emulsion, which in turn leads to different types of nanofiber formation. Nanofiber properties can also be modified by polarity inversion and by varying the collector design. The active moiety is incorporated into polymeric fibers by blending, surface modification or emulsion formation. The nanofibers can be further modified to deliver multiple drugs, and multilayer polymer coating allows sustained release of the incorporated active moiety. Electrospun nanofibers prepared from polymers are used to deliver antibiotic and anticancer agents, DNA, RNA, proteins and growth factors. This review provides a compilation of studies involving the use of electrospun fibers in biomedical applications with emphasis on nanoparticle-impregnated nanofibers.

Three-Dimensional Hierarchical Nanofibrous Collagen Scaffold Fabricated Using Fibrillated Collagen and Pluronic F-127 for Regenerating Bone Tissue

It is well known that a nanoscale fibrous structure can provide a unique stage for encouraging reasonable cell activities including attachment and proliferation owing to its similar topological structure to the extracellular matrix. Hence, the structure has been widely applied in tissue regeneration. Type-I collagen has been typically used as a typical tissue regenerative material owing to its biocompatibility and abundance, although it has potential for antigenicity. In particular, collagen has been fabricated in two different forms, porous spongy and nanofibers. However, although the structures provided outstanding cellular activities, they exhibit disadvantages such as low cell migration capabilities in a spongy scaffold owing to the low degree of interconnected macropores and low processability in fabricating three-dimensional (3D) structures in an electrospun collagen scaffold. Hence, the fabrication of 3D nanofibrous collagen structures with interconnected macropores can be extremely challenging. In this work, we developed a 3D collagen scaffold consisting of multilayered nanofibrous struts fabricated using a 3D printing process and pluronic F-127 (PF-127), which is a thermoreversible polymer. After optimizing various processing conditions, we successfully achieved the 3D nanofibrous collagen mesh structure with fully interconnected macropores. A 3D-printed collagen scaffold that was fabricated using a low-temperature printing process was applied as a control. Through various analyses using physical properties (surface morphology, fibronectin absorption, mechanical properties, etc.) and cell activities using preosteoblasts (MC3T3-E1), we are convinced that the newly designed 3D nanofibrous collagen scaffold can be a new promising scaffold for bone tissue engineering.

Mechanical Considerations for Electrospun Nanofibers in Tendon and Ligament Repair

Electrospun nanofibers possess unique qualities such as nanodiameter, high surface area to volume ratio, biomimetic architecture, and tunable chemical and electrical properties. Numerous studies have demonstrated the potential of nanofibrous architecture to direct cell morphology, migration, and more complex biological processes such as differentiation and extracellular matrix (ECM) deposition through topographical guidance cues. These advantages have created great interest in electrospun fibers for biomedical applications, including tendon and ligament repair. Electrospun nanofibers, despite their nanoscale size, generally exhibit poor mechanical properties compared to larger conventionally manufactured polymer fiber materials. This invites the question of what role electrospun polymer nanofibers can play in tendon and ligament repair applications that have both biological and mechanical requirements. At first glance, the strength and stiffness of electrospun nanofiber grafts appear to be too low to fill the rigorous loading conditions of these tissues. However, there are a number of strategies to enhance and tune the mechanical properties of electrospun nanofiber grafts. As researchers design the next-generation electrospun tendon and ligament grafts, it is critical to consider numerous physiologically relevant mechanical criteria and to evaluate graft mechanical performance in conditions and loading environments that reflect in vivo conditions and surgical fixation methods.

Polymer-Based Electrospun Nanofibers for Biomedical Applications

Electrospinning has been considered a promising and novel procedure to fabricate polymer nanofibers due to its simplicity, cost effectiveness, and high production rate, making this technique highly relevant for both industry and academia. It is used to fabricate non-woven fibers with unique characteristics such as high permeability, stability, porosity, surface area to volume ratio, ease of functionalization, and excellent mechanical performance. Nanofibers can be synthesized and tailored to suit a wide range of applications including energy, biotechnology, healthcare, and environmental engineering. A comprehensive outlook on the recent developments, and the influence of electrospinning on biomedical uses such as wound dressing, drug release, and tissue engineering, has been presented. Concerns regarding the procedural restrictions and research contests are addressed, in addition to providing insights about the future of this fabrication technique in the biomedical field.

Native collagen hydrogel nanofibres with anisotropic structure using core-shell electrospinning

Collagen hydrogel is a popular extracellular matrix (ECM) material in regenerative medicine and has an isotropic structure. In contrast, native ECM has an anisotropic structure. Electrospinning of collagen dissolved in organic solvents is widely used for fabricating anisotropic collagen nanofibres; however, such fibres are water-soluble and require cross-linking before use as scaffolds for cell culture. Herein, electrospinning using a core-shell nozzle was employed to spin an aqueous acidic solution of collagen and encapsulate it within a shell of polyvinylpyrrolidone (PVP). Subsequently, the core collagen was gelled, and the shell PVP was washed away using a basic ethanol solution to yield anisotropic collagen hydrogel nanofibres. Immunostaining and Fourier transform infrared spectroscopy revealed that the obtained fibres were composed of collagen, and surface PVP was removed completely. Circular dichroism measurements confirmed that the fibres exhibited the triple helical structure characteristic of collagen. Human umbilical vein endothelial cells cultured on the collagen hydrogel fibres were oriented along the fibre direction. Hence, this method is suitable for fabricating fibrous anisotropic collagen hydrogels without chemical and thermal cross-linking, and can facilitate the development of safe medical materials with anisotropy similar to that of native ECM.