Controlled dissolution of physically cross-linked locust bean gum - κ-carrageenan hydrogels

Most hydrogels swell but do not dissolve in water since their chains are tied to each other. Nevertheless, some hydrogels disintegrate under physiological conditions, a property that could be beneficial in emerging applications, including sacrificial materials, 3D bioprinting, and wound dressings. This paper proposes a novel approach to control the dissolution rate of hydrogels based on the integration of kappa carrageenan nanoparticles (KCAR-NPs) into kappa carrageenan (KCAR) and locust bean gum (LBG) hydrogels to obtain a three-component hybrid system. KCAR and LBG are known to have synergistic interactions, where physical interactions and chain entanglements lead to their gelation. We hypothesized that integrating the bulky nanoparticles would disturb the three-dimensional network formed by the polysaccharide chains and enable manipulating the dissolution rate. Compression, water absorption, rheology, and cryo-scanning electron microscopy measurements were performed to characterize the physical properties and structure of the hydrogels. The hybrid hydrogels displayed much faster dissolution rates than a control system without nanoparticles, which did not completely dissolve within 50 days and offered a cutting-edge means to finely adjust hydrogel dissolution through modulation of KCAR and KCAR-NPs concentrations. The new hydrogels also exhibited shear-thinning and self-healing properties resulting from the weak and reversible nature of the physical bonds.

Crosslinking konjac-glucomannan with kappa-carrageenan nanogels: A step toward the design of sacrificial materials

The challenge in designing sacrificial materials is to obtain materials that are both mechanically stable and easily dissolvable. This research aimed to meet this challenge by fabricating a new polymer-nanogel hydrogel based solely on hydrogen bonds between two polysaccharides. The study focused on hydrogels formed from soluble konjac-glucomannan and nanogels synthesized from kappa-carrageenan. This novel hydrogel exhibited self-healing and shear-thinning properties due to its weak physical interactions. The hydrogel dissolved simultaneously with its swelling. Changes in temperature or nanogel concentration, or the addition of potassium ions, altered the swelling and dissolution rates. Furthermore, adding KCl to the as-prepared hydrogel increased its compression and tensile moduli and its strength. The new formulation opens numerous possibilities as a potential sacrificial material for different applications since it is mechanically stable yet rapidly dissolves in physiological conditions without applying high temperatures or using chelating agents.

Polyvinyl alcohol and pectin blended films: Preparation, characterization, and mesenchymal stem cells attachment

The design of novel wound dressings for chronic wound treatment is still of great importance. One of the promising approaches is application of mesenchymal stem cells (MSCs), immobilized on a flexible polymer film, for healing. In this study, blended films based on polyvinyl alcohol (PVA) and pectin with different component ratio have been prepared by solution casting method and evaluated. Physicochemical properties of the formed PVA/pectin films, including their morphology, wettability, swelling, stability, mechanical characteristics, have been studied. We demonstrated that the surface of PVA/pectin films could be modified by ultraviolet or dielectric barrier discharge plasma exposure. After both ultraviolet and plasma treatment, the hydrophilicity of PVA/pectin films increased. It has been shown that additional crosslinking of PVA/pectin films with glutaraldehyde resulted in reinforcement of their structure. MSCs were cultured on neat and modified PVA/pectin samples to evaluate the effects of film characteristics and composition on cell behavior. It has been determined that MSCs effectively adhered to glutaraldehyde-crosslinked PVA/pectin films and formed on them the monolayer culture of fibroblast-like cells. The additional modification of PVA/pectin films with collagen resulted in enhancement of MSCs adhesion. Our results show that the obtained PVA/pectin films with adhered MSCs can be suggested for potential application as a part of novel complex wound dressings.

Pectin in biomedical and drug delivery applications: A review

Natural macromolecules have attracted increasing attention due to their biocompatibility, low toxicity, and biodegradability. Pectin is one of the few polysaccharides with biomedical activity, consequently a candidate in biomedical and drug delivery Applications. Rhamnogalacturonan-II, a smaller component in pectin, plays a major role in biomedical activities. The ubiquitous presence of hydroxyl and carboxyl groups in pectin contribute to their hydrophilicity and, hence, to the favorable biocompatibility, low toxicity, and biodegradability. However, pure pectin-based materials present undesirable swelling and corrosion properties. The hydrophilic groups, via coordination, electrophilic addition, esterification, transesterification reactions, can contribute to pectin's physicochemical properties. Here the properties, extraction, and modification of pectin, which are fundamental to biomedical and drug delivery applications, are reviewed. Moreover, the synthesis, properties, and performance of pectin-based hybrid materials, composite materials, and emulsions are elaborated. The comprehensive review presented here can provide valuable information on pectin and its biomedical and drug delivery applications.

Biomolecular uptake effects on chitosan/tripolyphosphate micro- and nanoparticle stability

Colloidal chitosan/tripolyphosphate (TPP) particles have attracted significant attention as potential delivery vehicles for drugs, genes and vaccines. Yet, there have been several fundamental studies that showed these particles to disintegrate at physiological pH and ionic strength levels. To reconcile these findings with the published drug, gene and vaccine delivery research where chitosan/TPP particle disintegration was not reported, it has been postulated that the particles could be stabilized by their bioactive payloads. To test this hypothesis, here we examine whether the association of chitosan/TPP particles with model anionic proteins, α-lactalbumin (α-LA) and bovine serum albumin (BSA), and polynucleotides (DNA) enhances chitosan/TPP particle stability at physiological ionic strengths, using 150 mM NaCl (pH 5.5) and 1× PBS (pH 6.0) as the dissolution media. Light scattering and UV-vis spectroscopy revealed that anionic protein uptake had no impact on particle stability, likely due to the relatively weak protein/particle binding at near-physiological ionic strengths, which caused the protein to be rapidly released. This result occurred regardless of whether the protein was loaded during or after particle formation. Conversely, DNA uptake (at least at some compositions) increased the chitosan fractions persisting in a complexed/particulate form in model dissolution media, with the DNA remaining largely complexed to the chitosan at all investigated conditions. Collectively, these findings suggest that, while most bioactive payloads do not interact with chitosan strongly enough to stabilize chitosan/TPP particles, these chitosan particles can be stabilized to dissolution through the incorporation of polyanions.

Development andIn-VitroEvaluation of pH Responsive Polymeric Nano Hydrogel Carrier System for Gastro-Protective Delivery of Naproxen Sodium

Current research work was carried out for gastro-protective delivery of naproxen sodium. Polyethylene glycol-g-poly (methacrylic acid) nanogels was developed through free radical polymerization technique. Formulation was characterized for swelling behaviour, entrapment efficiency, Fourier transform infrared (FTIR) spectroscopy, Differential scanning calorimetry (DSC), and Thermal Gravimetric Analysis (TGA), Powder X-ray diffraction (PXRD), Zeta size distribution, and Zeta potential measurements, andin-vitrodrug release. pH dependent swelling was observed with maximum drug release at higher pH. PXRD studies confirmed the conversion of loaded drug from crystalline to amorphous form while Zeta size measurement showed size reduction. On the basis of these results it was concluded that prepared nanogels proved an effective tool for gastro-protective delivery of naproxen sodium.

Improved transdermal delivery of cetirizine hydrochloride using polymeric microneedles

PURPOSE

The aim of this study was to design and characterize microneedle patch formulation containing cetirizine hydrochloride.

METHODS

Chitosan was co-formulated with cetirizine hydrochloride. Transdermal patches were prepared by casting this solution to microneedle molds. Control patches were formulated by casting this solution to a plain cuvet of same area as mold but lacking microneedles. An array of methods namely; differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) were employed for the characterization of the films and the microneedles accordingly whereas in vitro permeation studies were conducted across rat skin. Light microscopy was performed to assess any histological changes upon microneedles application onto the rat skin.

RESULTS

The patches had a reproducible thickness (0.86 ± 0.06 mm) and folding endurance. Both the blank and drug loaded patches had 100 microneedles each of 300 micrometre length. In addition, the microneedle patches were ascribed with a two-fold increase in drug permeation across rat skin in the presence of microneedles as compared to the control formulations. Histological examination confirms a minimal invasion of the skin conferred by the microneedles.

CONCLUSION

The microneedle patches serve as an alternate route of drug administration in patients with nausea and swelling difficulties. Graphical abstract Microneedle patch manifest a two-fold increase in the skin permeation of Cetirizine Hydrochloride as compared to the control that is drug loaded patch without microneedles.

Injectable hydrogel from plum pectin as a barrier for prevention of postoperative adhesion

An injectable hydrogel was obtained from the high methyl-esterified plum Prunus domestica L. (PD) pectin and calcium ions (Ca2+). PD hydrogel showed a weak gel-like behavior and could be squeezed out of the syringe with an injection force of ca. 9 N. PD hydrogel was not suitable for the NIH/3T3 fibroblast cell adhesion in vitro. The live/dead fluorescence and MTT (3-(4,5-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide) assays indicated that the PD hydrogel had a low cytotoxicity in relation to both the adhered and gel surrounding fibroblasts. PD hydrogel was found to inhibit adhesion formation in the sidewall defect-cecum abrasion rat model. In the control group, the occurrence of adhesion of the cecum to the peritoneal wall was found in seven of the total seven rats operated. Only four of the seven animals that were treated with the PD hydrogel were noted to have any adhesions. These adhesions were of a minimum grade of 1, 2, and 3 and were represented by a thin film that could be easily broken. The protective effect of PD hydrogel was found to be comparable with that of hyaluronic acid hydrogel used as a positive control. PD hydrogel appeared to possess enhanced in vivo residence stability on the injury sites compared to hyaluronic acid hydrogel as measured by staining of healing tissue with periodic acid-Schiff reagent. The data obtained offered the prospect for the development of the pectin-based gels as new barrier materials for surgery.

Tri-layered chitosan scaffold as a potential skin substitute

A tri-layered chitosan-based scaffold was successfully made to replicate the striation of a full-thickness skin more accurately than a single- or bi-layered scaffold, which needed weeks of co-culturing of fibroblasts and keratinocytes to achieve similar striation. Chitosan solution was freeze-dried and made into porous disks. Chitosan or chitosan-pectin in acetic acid solution was electrospun onto the chitosan disk to form a nanofibrous layer and a thin film. Examinations based on scanning electron spectroscopy showed that the scaffold was composed of a porous layer (2 mm) to simulate the dermis, a thin film (25-45 μm) to mimic the basement membrane, and a layer of nanofibers (100-200 μm) to serve as the protective epidermis. The tensile strength and modulus of the composite scaffold were significantly higher than those of the chitosan disk (p < 0.01). The composite was able to quickly absorb water and stayed intact throughout the course of the 14-day cell culture tests. The fibroblast cells seeded on both sides of the scaffolds were able to proliferate and stayed separated by the thin film.

Synthesis of temperature and pH-responsive crosslinked micelles from polypeptide-based graft copolymer

A polypeptide-based double hydrophilic graft copolymer was synthesized by the sequential grafting of poly(N-isopropylacrylamide) (PNIPAM) and 2-hydroxyethyl methacrylate (HEMA) onto poly(l-glutamic acid) (PGA) backbone. The copolymers were sensitive to both temperature and pH. The phase transition and aggregation behaviors of the graft copolymers in aqueous solutions were investigated by the turbidity measurements and dynamic laser scattering (DLS). The light transmittance decrease of the copolymers at temperature above lower critical solution temperature (LCST) was remarkably weakened at pH around 6.5 due to the coil to α helix change of PGA chain induced by pH. The copolymers can self-assembly into micelles with PNIPAM cores in the aqueous solution at pH 8.0 and 60°C. Subsequently, polymerization of HEMA led to the facile preparation of crosslinked micelles, which were observed directly by transmission electron microscopy (TEM). The temperature controlled shrinkage behaviors of crosslinked micelles highly depended on the pH values of the solution. The crosslinked micelles aggregated at pH 5.0 due to the increased hydrophobic interactions among them induced by the protonation of PGA component. These crosslinked micelles have promising applications as intelligent drug delivery vehicles.

Impact of glutaraldehyde on in vivo colon-specific release of resveratrol from biodegradable pectin-based formulation

Despite potential therapeutic efficacy of resveratrol on colitis and colorectal cancer, rapid absorption and metabolism at the upper gastro-intestinal (GI) tract prevent its clinical application. To overcome this, we attempted to develop colon-specific multi-particulate calcium-pectinate (Ca-pectinate) formulations of resveratrol. However, they were unable to prevent premature drug release at the upper GI tract. Thus, glutaraldehyde (Glu) was used for further cross-linking of the pectin chains. The formulation conditions and procedure were optimized from the in vitro drug release study. The optimized formulation was subjected to in vivo pharmacokinetic study in rats and compared with the unmodified Ca-pectinate and suspension formulation of resveratrol. Spherical particles (∼1 mm diameter) with high drug encapsulation were produced. Low cross-linking solution pH (1.5), minimum Glu concentration (2.5%) and cross-linking time (2 h) were crucial to exhibit colon-specific drug release. As Glu was added in the cross-linking solution, cross-linking between pectin chains and Glu occurred simultaneously during Ca-pectinate network formation, which appeared as a cost-effective formulation technique. Most importantly, the pharmacokinetic study demonstrated in vivo colon-specific drug release from the optimized formulation, while faster drug release was observed from the unmodified and suspension formulations. Hence, the developed formulation has potential to be used as colon-specific delivery system of resveratrol.

Nanogels as pharmaceutical carriers: finite networks of infinite capabilities

Nanogels are swollen nanosized networks composed of hydrophilic or amphiphilic polymer chains. They are developed as carriers for the transport of drugs, and can be designed to spontaneously incorporate biologically active molecules through formation of salt bonds, hydrogen bonds, or hydrophobic interactions. Polyelectrolyte nanogels can readily incorporate oppositely charged low-molecular-mass drugs and biomacromolecules such as oligo- and polynucleotides (siRNA, DNA) as well as proteins. The guest molecules interact electrostatically with the ionic polymer chains of the gel and become bound within the finite nanogel. Multiple chemical functionalities can be employed in the nanogels to introduce imaging labels and to allow targeted drug delivery. The latter can be achieved, for example, with degradable or cleavable cross-links. Recent studies suggest that nanogels have a very promising future in biomedical applications.