Graphene/Nickel Nanofiber Hybrids for Catalytic and Microbial Fuel Cell Applications

Nanofiber applications in microbial fuel cells for enhanced energy generation: a mini review

Microbial fuel cells (MFCs) represent simple devices that harness the metabolic activities of microorganisms to produce electrical energy from diverse sources such as organic waste and sustainable biomass. Because of their unique advantage to generate sustainable energy, through the employment of biodegradable and repurposed waste materials, the development of MFCs has garnered considerable interest. Critical elements are typically the electrodes and separator. This mini-review article presents a critical assessment of nanofiber technology used as electrodes and separators in MFCs to enhance energy generation. In particular, the review highlights the application of nanofiber webs in each part of MFCs including anodes, cathodes, and membranes and their influence on energy generation. The role of nanofiber technology in this regard is then analysed in detail, focusing on improved electron transfer rate, enhanced biofilm formation, and enhanced durability and stability. In addition, the challenges and opportunities associated with integrating nanofibers into MFCs are discussed, along with suggestions for future research in this field. Significant developments in MFCs over the past decade have led to a several-fold increase in achievable power density, yet further improvements in performance and the exploration of cost-effective materials remain promising areas for further advancement. This review demonstrates the great promise of nanofiber-based electrodes and separators in future applications of MFCs.

The enhancement of microbial fuel cell performance by anodic bacterial community adaptation and cathodic mixed nickel–copper oxides on a graphene electrocatalyst

Background

Although microbial fuel cells (MFCs) represent a promising technology for capturing renewable energy from wastewater, their scaling-up is significantly limited by a slow-rate cathodic oxygen reduction reaction (ORR) and the development of a resilient anodic microbial community. In this study, mixed transition metal oxides of nickel and copper (Ni and Cu), supported on a graphene (G) (NiO–CuO/G) electrocatalyst, were synthesized and tested as a cost-effective cathode for ORR in MFCs. Electrochemical measurements of electrocatalyst were conducted using a rotating disk electrode (RDE) and linear sweep voltammetry (LSV) in a neutral electrolyte, and compared with a benchmark Pt/C catalyst. Furthermore, the long-term performance of the as-synthesized electrocatalyst was evaluated in a single-chamber MFC by measuring organic matter removal and polarization behavior. The successful enrichment of electroactive biofilm was also monitored using transmission electron microscopy and the Vitek2 compact system technique.

Results

When compared with the benchmark platinum cathode, the NiO–CuO/G electrocatalyst exhibited high selectivity toward ORR. The rotating disk electrode (RDE) experiments reveal that ORR proceeds via a 4-electron ORR mechanism. Furthermore, the NiO–CuO/G electrocatalyst also exhibited a high power density of 21.25 mW m−2 in an air-cathode MFC, which was slightly lower than that of Pt/C-based MFC (i.e., 50.4 mW m−2). Biochemical characterization of the most abundant bacteria on anodic biofilms identified four genera (i.e., Escherichia coli, Shewanella putrefaciens, Bacillus cereus, and Bacillus Thuringiensis/mycoides) that belonged to Gammaproteobacteria, and Firmicutesphyla.

Conclusions

This study demonstrates that the NiO–CuO/G cathode had an enhanced electrocatalytic activity toward ORR in a pH-neutral solution. This novel mixed transition metal oxide electrocatalyst could replace expensive Pt-based catalysts for MFC applications.

Electromagnetic Interference Shielding Effectiveness of Room Temperature Fabricated Manganese Dioxide/Carbon Dots Nanocomposites

The present work is focused on the fabrication of manganese dioxide/carbon dots (MnO₂/CDs) nanocomposites at room temperature in situ co-participation method in an aqueous medium and characterized. Our study showed that the concentration of CDs controls the morphology of MnO₂/CDs nanocomposite and also acted as a reducing agent to convert potassium permanganate (KMnO₄) to MnO₂. Subsequently, nanoflowers, quasi-spherical particles, broken, and interconnected chain type of morphology was observed by adding dispersion of 0.5, 1.0, 1.5, and 2.0 ml CDs in acetone to 1 mmol KMnO₄ aqueous solution in the corresponding MnO₂/CDs-0.5, MnO₂/CDs-1.0, MnO₂/CDs-1.5, and MnO₂/CDs-2.0 composites, respectively. A plausible mechanism on the transformation of morphology of MnO₂/CDs with CDs concentration is also provided. Further, the present work also focused for the first time on the application in the electromagnetic interference (EMI) shielding of MnO₂/CD nanocomposites due to the high dielectric and conductivity. Interestingly, MnO₂/CDs-2.0 (nanochains) exhibited the highest total EMI shielding efficiency (SE_T) of ~39.4 dB following reflection as dominant shielding mechanism due to the high aspect ratio, highest conductivity, high dielectric loss, and impendence mismatch.

Fabrication of High Dielectric Materials Through Selective Insertion of Functionalized Reduced Graphene Oxide on Hard Segment of Thermoplastic Polyurethane

The presence of microcapacitors near percolatrion threshold determines dielectric permittivity of a material. Motivated by this concept, we focused our work by preferentially allocating functionalized reduced graphene oxide (FRGO) in hard segment (disperse phase) of Thermoplastic polyurethane (TPU) by solution blending method and characterized. Morphological studies of TPU/FRGO nanocomposites established homogeneous dispersion of FRGO throughout the TPU matrix. It is noted that TPU/FRGO (1 phr) nanocomposites exhibit maximum increase in tensile strength (33%) and elongation at break (10%). Thermogravimetric analysis (TGA) showed maximum enhancement in onset of decomposition temperature (~6 °C) in 2 phr FRGO loaded TPU. Differential scanning calorimetry (DSC) analysis showed maximum reduction (~2 °C) in glass transition temperature (T_g) of soft segment of TPU followed by maximum improvements in melting temperature (~4 °C) as well as crystallization temperature (~22 °C) of hard segment compared to neat TPU. Further, a significantly high value of dielectric permittivity (401) is achieved in 1.5 phr loaded FRGO at 100 Hz due to the formation of significantly higher number of microcapacitors near the percolation threshold. It is anticipated that such thermally stable and mechanically strong high dielectric TPU/FRGO nanocomposites can find applications in the field of electronic devices.

Functional Graphene Nanomaterials Based Architectures: Biointeractions, Fabrications, and Emerging Biological Applications

Functional graphene nanomaterials (FGNs) are fast emerging materials with extremely unique physical and chemical properties and physiological ability to interfere and/or interact with bioorganisms; as a result, FGNs present manifold possibilities for diverse biological applications. Beyond their use in drug/gene delivery, phototherapy, and bioimaging, recent studies have revealed that FGNs can significantly promote interfacial biointeractions, in particular, with proteins, mammalian cells/stem cells, and microbials. FGNs can adsorb and concentrate nutrition factors including proteins from physiological media. This accelerates the formation of extracellular matrix, which eventually promotes cell colonization by providing a more beneficial microenvironment for cell adhesion and growth. Furthermore, FGNs can also interact with cocultured cells by physical or chemical stimulation, which significantly mediate their cellular signaling and biological performance. In this review, we elucidate FGNs-bioorganism interactions and summarize recent advancements on designing FGN-based two-dimensional and three-dimensional architectures as multifunctional biological platforms. We have also discussed the representative biological applications regarding these FGN-based bioactive architectures. Furthermore, the future perspectives and emerging challenges will also be highlighted. Due to the lack of comprehensive reviews in this emerging field, this review may catch great interest and inspire many new opportunities across a broad range of disciplines.