A prototype antifungal contact lens

Drug-impregnated contact lenses via supercritical carbon dioxide: A viable solution for the treatment of bacterial and fungal keratitis

Keratitis is a corneal infection caused by various bacteria and fungi. Eye drop treatment of keratitis involves significant challenges due to difficulties in administration, inefficiencies in therapeutic dosage, and frequency of drug applications. All these are troublesome and result in unsuccessful treatment, high cost, time loss, development of drug resistance by microorganisms, and a massive burden on human health and the healthcare system. Most of the antibacterial and antifungal medications are non-water-soluble and/or include toxic drug formulations. Here, the aim was to develop drug-loaded contact lenses with therapeutic dosage formulations and extended drug release capability as an alternative to eye drops, by employing supercritical carbon dioxide (ScCO2) as a drug impregnation solvent to overcome inefficient ophthalmic drug use. ScCO2, known as a green solvent, has very low viscosity which provides high mass transfer power and could enhance drug penetration into contact lenses much better with respect to drug loading using other solvents. Here, moxifloxacin (MOX) antibiotic and amphotericin B (AMB) antifungal medicines were separately loaded into commercially available silicone hydrogel contact lenses through 1) drug adsorption from the aqueous solutions and 2) impregnation techniques via ScCO2 and their efficacies were compared. Drug impregnation parameters, i.e., 8-25 MPa pressure, 310-320 K temperature, 2-16-hour impregnation times, and the presence of ethanol as polar co-solvent were investigated for the optimization of the ScCO2 drug impregnation process. The highest drug loading and long-term release kinetic from the contact lenses were obtained at 25 MPa and 313 K with 2.5 h impregnation time by using 1 % ethanol (by volume). Furthermore, antibacterial/antifungal activities of the MOX- and AMB-impregnated contact lenses were effective against in vitro Pseudomonas aeruginosa (ATCC 10145) bacteria and Fusarium solani (ATCC 36031) fungus for up to one week. Consequently, the ScCO2 method can be effectively used to impregnate commercial contact lenses with drugs, and these can then be safely used for the treatment of keratitis. This offers a sustainable delivery system at effective dosage formulations with complete bacterial/fungal inhibition and termination, making it viable for real animal/human applications.

Recent Advances in Diagnosis and Treatment Approaches in Fungal Keratitis: A Narrative Review

Fungal keratitis represents a potentially sight-threatening infection associated with poor prognosis, as well as financial burden. Novel diagnostic methods include polymerase-chain-reaction (PCR)-based approaches, metagenomic deep sequences, in vivo confocal microscopy, and antifungal susceptibility testing. The ideal therapeutic approaches and outcomes have been widely discussed in recent times, with early therapy being of the utmost importance for the preservation of visual acuity, minimizing corneal damage and reducing the scar size. However, combination therapy can be more efficacious compared to monotherapy. Understanding the pathogenesis, early diagnosis, and prevention strategies can be of great importance. In this narrative, we discuss the recent progress that may aid our understanding of the diagnosis, treatment, and prevention of mycotic keratitis.

Drug-Eluting Sandwich Hydrogel Lenses Based on Microchamber Film Drug Encapsulation

Corticosteroids are widely used as an anti-inflammatory treatment for eye inflammation, but the current methods used in clinical practice for delivery are in the form of eye drops which is usually complicated for patients or ineffective. This results in an increase in the risk of detrimental side effects. In this study, we demonstrated proof-of-concept research for the development of a contact lens-based delivery system. The sandwich hydrogel contact lens consists of a polymer microchamber film made via soft lithography with an encapsulated corticosteroid, in this case, dexamethasone, located inside the contact lens. The developed delivery system showed sustained and controlled release of the drug. The central visual part of the lenses was cleared from the polylactic acid microchamber in order to maintain a clean central aperture similar to the cosmetic-colored hydrogel contact lenses.

Review of Potential Drug-Eluting Contact Lens Technologies

The field of ophthalmology is expanding exponentially, both in terms of diagnostic and therapeutic capabilities, as well as the worldwide increasing incidence of eye-related diseases. Due to an ageing population and climate change, the number of ophthalmic patients will continue to increase, overwhelming healthcare systems and likely leading to under-treatment of chronic eye diseases. Since drops are the mainstay of therapy, clinicians have long emphasised the unmet need for ocular drug delivery. Alternative methods, i.e., with better compliance, stability and longevity of drug delivery, would be preferred. Several approaches and materials are being studied and used to overcome these drawbacks. We believe that drug-loaded contact lenses are among the most promising and are a real step toward dropless ocular therapy, potentially leading to a transformation in clinical ophthalmic practice. In this review, we outline the current role of contact lenses in ocular drug delivery, focusing on materials, drug binding and preparation, concluding with a look at future developments.

Smart Contact Lens Systems for Ocular Drug Delivery and Therapy

Ocular drug delivery and therapy systems have been extensively investigated with various methods including direct injections, eye drops and contact lenses. Nowadays, smart contact lens systems are attracting a lot of attention for ocular drug delivery and therapy due to their minimally invasive or non-invasive characteristics, highly enhanced drug permeation, high bioavailability, and on-demand drug delivery. Furthermore, smart contact lens systems can be used for direct light delivery into the eyes for biophotonic therapy replacing the use of drugs. Here, we review smart contact lens systems which can be classified into two groups of drug-eluting contact lens and ocular device contact lens. More specifically, this review covers smart contact lens systems with nanocomposite-laden systems, polymeric film-incorporated systems, micro and nanostructure systems, iontophoretic systems, electrochemical systems, and phototherapy systems for ocular drug delivery and therapy. After that, we discuss the future opportunities, challenges and perspectives of smart contact lens systems for ocular drug delivery and therapy.

Therapeutic contact lenses for the treatment of corneal and ocular surface diseases: advances in extended and targeted drug delivery

The eye is one of the most important organs in the human body providing critical information on the environment. Many corneal diseases can lead to vision loss affecting the lives of people around the world. Ophthalmic drug delivery has always been a major challenge in the medical sciences. Since traditional methods are less efficient (∼ 5%) at delivering drugs to ocular tissues, contact lenses have generated growing interest in ocular drug delivery due to their potential to enhance drug bioavailability in ocular tissues. The main techniques used to achieve sustained release are discussed in this review, including soaking in drug solutions, incorporating drug into multilayered contact lenses, use of vitamin E barriers, molecular imprinting, nanoparticles, micelles and liposomes. The most clinically relevant results on different eye pathologies are presented. In addition, this review summarizes the benefits of contact lenses over eye drops, strategies for incorporating drugs into lenses to achieve sustained release, results of in vitro and in vivo studies, and the recent advances in the commercialization of therapeutic contact lenses for allergic conjunctivitis.

Cellulose Acetate Phthalate-Based pH-Responsive Cyclosporine A-Loaded Contact Lens for the Treatment of Dry Eye

Cyclosporine A (CsA) as an eye drop is an effective treatment for dry eye. However, it has potential side effects and a short ocular residence time. To overcome these obstacles, we developed a cellulose acetate phthalate-based pH-responsive contact lens (CL) loaded with CsA (CsA-CL). The CsA was continuously released from the CsA-CL at physiological conditions (37 °C, pH 7.4) without an initial burst. CsA was well-contained in the selected storage condition (4 °C, pH 5.4) for as long as 90 days. In safety assays, cytotoxicity, ocular irritation, visible light transmittance, and oxygen permeability were in a normal range. CsA concentrations in the conjunctiva, cornea, and lens increased over time until 12 h. When comparing the therapeutic efficacy between the normal control, experimental dry eye (EDE), and treatment groups (CsA eye drop, naïve CL, and CsA-CL groups), the tear volume, TBUT, corneal fluorescein staining at 7 and 14 days, conjunctival goblet cell density, and corneal apoptotic cell counts at 14 days improved in all treatment groups compared to EDE, with a significantly better result in the CsA-CL group compared with other groups (all p < 0.05). The CsA-CL could be an effective, stable, and safe option for inflammatory dry eye.

Progress of polymer-based strategies in fungal disease management: Designed for different roles

Fungal diseases have posed a great challenge to global health, but have fewer solutions compared to bacterial and viral infections. Development and application of new treatment modalities for fungi are limited by their inherent essential properties as eukaryotes. The microorganism identification and drug sensitivity analyze are limited by their proliferation rates. Moreover, there are currently no vaccines for prevention. Polymer science and related interdisciplinary technologies have revolutionized the field of fungal disease management. To date, numerous advanced polymer-based systems have been developed for management of fungal diseases, including prevention, diagnosis, treatment and monitoring. In this review, we provide an overview of current needs and advances in polymer-based strategies against fungal diseases. We high light various treatment modalities. Delivery systems of antifungal drugs, systems based on polymers' innate antifungal activities, and photodynamic therapies each follow their own mechanisms and unique design clues. We also discuss various prevention strategies including immunization and antifungal medical devices, and further describe point-of-care testing platforms as futuristic diagnostic and monitoring tools. The broad application of polymer-based strategies for both public and personal health management is prospected and integrated systems have become a promising direction. However, there is a gap between experimental studies and clinical translation. In future, well-designed in vivo trials should be conducted to reveal the underlying mechanisms and explore the efficacy as well as biosafety of polymer-based products.

Topical Sustained Delivery of Miltefosine Via Drug-Eluting Contact Lenses to Treat Acanthamoeba Keratitis

This study aimed to develop a miltefosine-eluting contact lens (MLF-CL) device that would allow sustained and localized miltefosine release for the treatment of Acanthamoeba keratitis. MLF-CLs were produced in three different miltefosine doses by solvent-casting a thin miltefosine-polymer film around the periphery of a methafilcon hydrogel, which was then lathed into a contact lens. During seven days of in vitro testing, all three formulations demonstrated sustained release from the lens at theoretically therapeutic levels. Based on the physicochemical characterization of MLF-CLs, MLF-CL's physical properties are not significantly different from commercial contact lenses in terms of light transmittance, water content and wettability. MLF-CLs possessed a slight reduction in compression modulus that was attributed to the inclusion of polymer-drug films but still remain within the optimal range of soft contact lenses. In cytotoxicity studies, MLF-CL indicated up to 91% viability, which decreased proportionally as miltefosine loading increased. A three-day biocompatibility test on New Zealand White rabbits revealed no impact of MLF-CLs on the corneal tissue. The MLF-CLs provided sustained in vitro release of miltefosine for a week while maintaining comparable physical features to a commercial contact lens. MLF-CL has a promising potential to be used as a successful treatment method for Acanthamoeba keratitis.

Phenylboronic acid modified hydrogel materials and their potential for use in contact lens based drug delivery

The use of hydrogel-based contact lens materials holds promise for ophthalmic drug delivery by increasing drug residence time, improving drug bioavailability, reducing administration frequency, and enhancing special site targeting. Issues such as ease of manufacturing, lens comfort and appropriate release kinetics must be considered. Furthermore, the high water content of hydrogel materials can result in rapid and poorly controlled release kinetics. Herein, we modified common hydrogels used in contact lens manufacturing with phenylboronic acid (PBA). PBA addresses these material design issues since boronate esters are easily formed when boron acid and diols interact, opening up a pathway for simple modification of the model lens materials with saccharide based wetting agents. The wetting agents have the potential to improve lens comfort. Furthermore, the hydrophobicity of PBA and the presence of diols can be useful to help control drug release kinetics. In this work, polymerizable 3-(acrylamido)phenylboronic acid (APBA) was synthesized and incorporated into various hydrogels used in contact lens applications, including poly(2-hydroxyethylmethacrylate) (PHEMA), polyvinylpyrrolidone (PVP) and poly(N,N-dimethyl acrylamide) (PDMA) using UV induced free radical polymerization. The APBA structure and its incorporation into the hydrogel materials were confirmed by NMR and FTIR. The materials were shown to interact with and bind wetting agents such as hyaluronan (HA) and hydroxypropyl guar (HPG) by simple soaking in an aqueous solution. The equilibrium water content of the modified materials was characterized, demonstrating that most materials are still in the appropriate range after the introduction of the hydrophobic PBA. The release of three model ophthalmic drugs with varying hydrophilicity, atropine, atropine sulfate and dexamethasone, was examined. The presence of PBA in the materials was found to promote sustained drug release due to its hydrophobic nature. The results suggest that the modification of the materials with PBA was able to not only provide a mucoadhesive property that enhanced wetting agent interactions with the materials, but had the potential to alter drug release. Thus, the modification of contact lens materials with mucoadhesive functionality may be useful in the design of hydrogel contact lenses for ophthalmic drug release and wetting agent binding.

The Boston Keratoprosthesis-The First 50 Years: Some Reminiscences

Millions of people worldwide are bilaterally blind due to corneal diseases including infectious etiologies, trauma, and chemical injuries. While corneal transplantation can successfully restore sight in many, corneal graft survival decreases in eyes with chronic inflammation and corneal vascularization. Additionally, the availability of donor cornea material can be limited, especially in underdeveloped countries where corneal blindness may also be highly prevalent. Development of methods to create and implant an artificial cornea (keratoprosthesis)may be the only option for patients whose eye disease is not suitable for corneal transplantation or who live in regions where corneal transplantation is not possible. The Boston keratoprosthesis (B-KPro) is the most commonly implanted keratoprosthesis worldwide, having restored vision in thousands of patients. This article describes the initial design of the B-KPro and the modifications that have been made over many years. Additionally, some of the complications of surgical implantation and long-term care challenges, particularly complicating inflammation and glaucoma, are discussed. Expected final online publication date for the Annual Review of Vision Science, Volume 8 is September 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Lab-on-a-Contact Lens: Recent Advances and Future Opportunities in Diagnostics and Therapeutics

The eye is one of the most complex organs in the human body, containing rich and critical physiological information (e.g., intraocular pressure, corneal temperature, and pH) as well as a library of metabolite biomarkers (e.g., glucose, proteins, and specific ions). Smart contact lenses (SCLs) can serve as a wearable intelligent ocular prosthetic device capable of noninvasive and continuous monitoring of various essential physical/biochemical parameters and drug loading/delivery for the treatment of ocular diseases. Advances in SCL technologies and the growing public interest in personalized health are accelerating SCL research more than ever before. Here, the current status and potential of SCL development through a comprehensive review from fabrication to applications to commercialization are discussed. First, the material, fabrication, and platform designs of the SCLs for the diagnostic and therapeutic applications are discussed. Then, the latest advances in diagnostic and therapeutic SCLs for clinical translation are reviewed. Later, the established techniques for wearable power transfer and wireless data transmission applied to current SCL devices are summarized. An outlook, future opportunities, and challenges for developing next-generation SCL devices are also provided. With the rise in interest of SCL development, this comprehensive and essential review can serve as a new paradigm for the SCL devices.

Update on diagnosis and management of refractory corneal infections

Infectious keratitis is a medical emergency resulting in significant visual morbidity. Indiscriminate use of antimicrobials leading to the emergence of resistant or refractory microorganisms has further worsened the prognosis. Coexisting ocular surface diseases, delay in diagnosis due to inadequate microbiological sample, a slow-growing/virulent organism, or systemic immunosuppressive state all contribute to the refractory response of the ulcer. With improved understanding of these varied ocular and systemic factors contributing to the refractory nature of the microbes, role of biofilm formation and recent research on improving the bioavailability of drugs along with the development of alternative therapies have helped provide the required multidimensional approach to effectively diagnose and manage cases of refractory corneal ulcers and prevent corneal perforations or further dissemination of disease. In this review, we explore the current literature and future directions of the diagnosis and treatment of refractory keratitis.

Bibliometric and visualized analysis of ocular drug delivery from 2001 to 2020

OBJECTIVE

To perform a bibliometric analysis in the field of ocular drug delivery research to characterize the current international trends and to present visual representations of the past and emerging trends on ocular drug delivery research over the past decade.

METHOD

In this cross-sectional study, a bibliometric analysis of data retrieved and extracted from the Web of Science Core Collection (WoSCC) database was performed to analyze evolution and theme trends on ocular drug delivery research from January 1, 2001, to December 31, 2020. A total of 4334 articles on ocular drug delivery were evaluated for specific characteristics, such as publication year, journals, authors, institutions, countries/regions, references, and keywords. Co-authorship analysis, co-occurrence analysis, co-citation analysis, and network visualization were constructed by VOSviewer. Some important subtopics identified by bibliometric characterization were further discussed and reviewed.

RESULTS

From 2001 to 2020, the annual global publications increased by 746.15%, from 52 to 440. International Journal of Pharmaceutics published the most manuscripts (250 publications) and produced the highest citations (9509 citations), followed by Investigative Ophthalmology & Visual Science (202 publications) and Journal of Ocular Pharmacology and Therapeutics (136 publications). The United States (1289 publications, 31,512 citations), the University of Florida (82 publications, 2986 citations), and Chauhan, Anuj (52 publications, 2354 citations) were the most productive and impactful institution, country, and author respectively. The co-occurrence cluster analysis of the top 100 keywords form five clusters: (1) micro/nano ocular drug delivery systems; (2) the treatment of inflammation and posterior diseases; (3) macroscopic ocular drug delivery systems/devices; (4) the characteristics of drug delivery systems; (5) and the ocular drug delivery for glaucoma treatment. Diabetic macular edema, anti-VEGF, ranibizumab, bevacizumab, micelles and latanoprost, were the latest high-frequency keywords, indicating the emerging frontiers of ocular drug delivery. Further discussions into the subtopics were provided to assist researchers to determine the range of research topics and plan research direction.

CONCLUSIONS

Over the last two decades there has been a progressive increase in the number of publications and citations on research related to ocular drug delivery across many countries, institutions, and authors. The present study sheds light on current trends, global collaboration patterns, basic knowledge, research hotspots, and emerging frontiers of ocular drug delivery. Novel solutions for ocular drug delivery and the treatment of inflammation and posterior diseases were the major themes over the last 20 years.

Polymeric Drug Delivery Devices: Role in Cornea and External Disease

ABSTRACT

The field of ophthalmic drug delivery is undergoing rapid changes not only in the evolution of pharmacologic agents but also in the novel drug delivery vehicles. The ocular surface has limitations to drug penetration because of the presence of tight junctions between basal epithelial cells, which limits the amount of drug that can be absorbed after topical instillation. In addition, nasolacrimal drainage reduces the precorneal residence time significantly. Contact lenses (CLs) have been considered as possible carriers for topical medications because they reside on the ocular surface for a sufficient length of time, and pharmacologic agents may be copolymerized with hydrogels allowing controlled drug diffusion. This strategy reduces the frequency of dosage while improving compliance. Modification of drug delivery vehicles is essential to allow sustained release of the drug from a polymeric complex, facilitate stability and residence time of the drug on the precorneal tear film, and improve penetration into biologic membranes. This review focuses on updates in CL-based and non-CL-based strategies in ophthalmic drug delivery.

Targeting Ocular Drug Delivery: An Examination of Local Anatomy and Current Approaches

Ocular drug delivery remains the focus of much modern research. Primary routes of administration include the surface, the intravitreal space, the subretinal space, and the subconjunctival space, each with its own series of unique challenges, limitations, and advantages. Each of these approaches requires careful consideration of the local anatomy, physical barriers, and key cells as well as the interface between the anatomy and the drug or drug system being delivered. While least invasive, the topical route poses a challenge with the many physical barriers that prevent drug penetration into the eye; while injection into the intravitreal, subretinal, and subconjunctival spaces are direct and targeted but limited due to the many internal clearance mechanisms and potential for damage to the eye. Polymeric-based, sustained-release drug delivery systems have been identified as a potential solution to many of these challenges; however, the design and successful implementation of a sustained-release system that is well-tolerated, bioactive, biocompatible, and degradable remains, in many cases, only in the early stages. The drugs and biomaterials in question also require special attention as small chemical changes could result in vastly different outcomes. This paper explores the anatomy and key cells of these four primary drug delivery routes as well as the interface between drug and drug delivery systems and the anatomy, reviewing the recent developments and current state of research in each area. Finally, this paper also examines the frequently used drugs and biomaterials found in ocular drug delivery and summarizes the primary interactions observed.

Recent Perspectives in the Management of Fungal Keratitis

Mycotic keratitis is common in warm, humid regions with a varying profile of pathogenic fungi according to geographical origin, socioeconomic status, and climatic condition. Clinical diagnosis can be challenging in difficult cases and those refractory to treatment. Fungal hyphae on microscopic examination and culture isolation have been the gold standard in the laboratory diagnosis of fungal keratitis. A culture isolate of the aetiological fungus is essential to perform antifungal susceptibility testing. As the culture isolation of fungi is time-consuming, causing delays in the initiation of treatment, newer investigative modalities such as in vivo confocal microscopy and molecular diagnostic methods have recently gained popularity. Molecular diagnostic techniques now help to obtain a rapid diagnosis of fungal keratitis. Genomic approaches are based on detecting amplicons of ribosomal RNA genes, with internal transcribed spacers being increasingly adopted. Metagenomic deep sequencing allows for rapid and accurate diagnosis without the need to wait for the fungus to grow. This is also helpful in identifying new emerging strains of fungi causing mycotic keratitis. A custom-tear proteomic approach will probably play an important diagnostic role in future in the management of mycotic keratitis. Positive repeat cultures are being suggested as an important gauge indicative of a poor prognosis. Positive repeat fungal cultures help to modify a treatment regimen by increasing its frequency, providing the addition of another topical and oral antifungal agent along with close follow-up for perforation and identifying need for early therapeutic keratoplasty. The role of collagen crosslinking in the treatment of fungal keratitis is not convincingly established. Rapid detection by multiplex PCR and antifungal susceptibility testing of the pathogenic fungi, adopted into a routine management protocol of fungal keratitis, will help to improve treatment outcome. Early therapy is essential in minimizing damage to the corneal tissue, thereby providing a better outcome. The role of conventional therapy with polyenes, systemic and targeted therapy of antifungal agents, newer azoles and echinocandins in fungal keratitis has been widely studied in recent times. Combination therapy can be more efficacious in comparison to monotherapy. Given the diversity of fungal aetiology, the emergence of new corneal pathogenic fungi with varying drug susceptibilities, increasing the drug resistance to antifungal agents in some genera and species, it is perhaps time to adopt recent molecular methods for precise identification and incorporate antifungal susceptibility testing as a routine.

Drug delivery to the anterior segment of the eye: A review of current and future treatment strategies

Research in the development of ophthalmic drug formulations and innovative technologies over the past few decades has been directed at improving the penetration of medications delivered to the eye. Currently, approximately 90% of all ophthalmic drug formulations (e.g. liposomes, micelles) are applied as eye drops. The major challenge of topical eye drops is low bioavailability, need for frequent instillation due to the short half-life, poor drug solubility, and potential side effects. Recent research has been focused on improving topical drug delivery devices by increasing ocular residence time, overcoming physiological and anatomical barriers, and developing medical devices and drug formulations to increase the duration of action of the active drugs. Researchers have developed innovative technologies and formulations ranging from sub-micron to macroscopic size such as prodrugs, enhancers, mucus-penetrating particles (MPPs), therapeutic contact lenses, and collagen corneal shields. Another approach towards the development of effective topical drug delivery is embedding therapeutic formulations in microdevices designed for sustained release of the active drugs. The goal is to optimize the delivery of ophthalmic medications by achieving high drug concentration with prolonged duration of action that is convenient for patients to administer.

Soft Contact Lenses as Drug Delivery Systems: A Review

This review describes the role of contact lenses as an innovative drug delivery system in treating eye diseases. Current ophthalmic drug delivery systems are inadequate, particularly eye drops, which allow about 95% of the active substance to be lost through tear drainage. According to the literature, many interdisciplinary studies have been carried out on the ability of contact lenses to increase the penetration of topical therapeutic agents. Contact lenses limit drug loss by releasing the medicine into two layers of tears on either side of the contact lens, eventually extending the time of contact with the ocular surface. Thanks to weighted soft contact lenses, a continuous release of the drug over an extended period is possible. This article reviewed the various techniques to deliver medications through contact lenses, examining their advantages and disadvantages. In addition, the potential of drug delivery systems based on contact lenses has been extensively studied.

The Search for Antifungal Prophylaxis After Artificial Corneal Surgery-An In Vitro Study

PURPOSE

To evaluate the antifungal properties of topical antibiotics (already being used successfully to prevent bacterial endophthalmitis) and some promising antiseptics for antifungal prophylaxis in the setting of artificial corneal implantation.

METHODS

Several commonly used antibiotics for antimicrobial prophylaxis after artificial corneal implantation, in addition to antiseptics [benzalkonium chloride (BAK), povidone-iodine (PI), and some ionic liquids (ILs)], were tested in vitro against Candida albicans, Fusarium solani, and Aspergillus fumigatus. The time-kill activity was determined. Toxicity was assayed in vitro on human corneal epithelial cultures using trypan blue. Adhesion and tissue invasion experiments were also carried out on porcine corneas and commonly used contact lenses, with or without gamma irradiation, and by analysis with fluorescence microscopy.

RESULTS

Polymyxin B (PMB)/trimethoprim/BAK (Polytrim), PMB alone, gatifloxacin with BAK (Zymaxid), and same-concentration BAK alone exhibited antifungal activity in vitro. Moxifloxacin (MOX) or gatifloxacin without BAK-as well as trimethoprim, vancomycin, and chloramphenicol-had no effect. 1% PI and ILs had the highest efficacy/toxicity ratios (>1), and Polytrim was species dependent. Subfungicidal concentrations of Polytrim reduced adhesion of C. albicans to Kontur contact lenses. Gamma-irradiated corneas showed enhanced resistance to fungal invasion.

CONCLUSIONS

Of antibiotic preparations already in use for bacterial prophylaxis after KPro surgery, Polytrim is a commonly used antibiotic with antifungal effects mediated by both PMB and BAK and may be sufficient for prophylaxis. PI as a 1% solution seems to be promising as a long-term antifungal agent. Choline-undecanoate IL is effective and virtually nontoxic and warrants further development.

Contact Lenses as Ophthalmic Drug Delivery Systems: A Review

Ophthalmic drugs used for the treatment of various ocular diseases are commonly administered by eye drops. However, due to anatomical and physiological factors, there is a low bioavailability of the active principle. In order to increase the drug residence time on the cornea to adequate levels, therapeutic contact lenses have recently been proposed. The polymeric support that constitutes the contact lens is loaded with the drug; in this way, there is a direct and effective pharmacological action on the target organ, promoting a prolonged release of the active principle. The incorporation of ophthalmic drugs into contact lenses can be performed by different techniques; nowadays, the soaking method is mainly employed. To improve the therapeutic performance of drug-loaded contact lenses, innovative methods have recently been proposed, including the impregnation with supercritical carbon dioxide. This updated review of therapeutic contact lenses production and application provides useful information on the most effective preparation methodologies, recent achievements and future perspectives.

Steroid-eluting contact lenses for corneal and intraocular inflammation

Ocular inflammation is one of the leading causes of blindness worldwide, and steroids in topical ophthalmic solutions (e.g. dexamethasone eye drops) are the mainstay of therapy for ocular inflammation. For many non-infectious ocular inflammatory diseases, such as uveitis, eye drops are administered as often as once every hour. The high frequency of administration coupled with the side effects of eye drops leads to poor adherence for patients. Drug-eluting contact lenses have long been sought as a potentially superior alternative for sustained ocular drug delivery; but loading sufficient drug into contact lenses and control the release of the drug is still a challenge. A dexamethasone releasing contact lens (Dex-Lens) was previously developed by encapsulating a dexamethasone-polymer film within the periphery of a hydrogel-based contact lens. Here, we demonstrate safety and efficacy of the Dex-Lens in rabbit models in the treatment of anterior ocular inflammation. The Dex-Lens delivered drug for 7 days in vivo (rabbit model). In an ocular irritation study (Draize test) with Dex-Lens extracts, no adverse events were observed in normal rabbit eyes. Dex-Lenses effectively inhibited suture-induced corneal neovascularization and inflammation for 7 days and lipopolysaccharide-induced anterior uveitis for 5 days. The efficacy of Dex-Lenses was similar to that of hourly-administered dexamethasone eye drops. In the corneal neovascularization study, substantial corneal edema was observed in rabbit eyes that received no treatment and those that wore a vehicle lens as compared to rabbit eyes that wore the Dex-Lens. Throughout these studies, Dex-Lenses were well tolerated and did not exhibit signs of toxicity. Dexamethasone-eluting contact lenses may be an option for the treatment of ocular inflammation and a platform for ocular drug delivery. STATEMENT OF SIGNIFICANCE: Inflammation of the eye can happen either on the ocular surface (i.e. the cornea) or inside the eye, both of which can result in loss of vision or even blindness. Ocular inflammation is normally treated by steroid eye drops. Depending on the type and severity of inflammation, patients may have to take drops every hour for days at a time. Such severe dosing regimen can lead to patients missing doses. Also, more than 95% drug in an eye drop never goes inside the eye. Here we present a contact lens that release a steroid (dexamethasone) for seven days at a time. It is much more efficient than eye drops and a significant improvement since once worn, the patient will avoid missing doses.

Multiple drug delivery from the drug-implants-laden silicone contact lens: Addressing the issue of burst drug release

A fixed combination of bimatoprost/timolol eye drop solution is used to manage the elevated intra-ocular pressure in glaucoma patients, including individuals whose condition is poorly controlled by monotherapy. Eye drop solutions are generally given in high dose, due to poor ocular bioavailability. The high ocular dose of bimatoprost and timolol lead to hyperaemia and systemic cardiac side effects respectively. Here, we introduce multiple implant-laden contact lenses (IM) to passively deliver timolol, bimatoprost and hyaluronic acid at therapeutically relevant doses without high burst release. The drug-loaded implants were individually implanted in the outer periphery of the silicone contact lenses. Atomic force microscopy showed the smooth surface of the implant contact lens, as the implants were inside the contact lens matrix. The implant lens (IM) showed major loss of drugs [timolol = 60.60%, bimatoprost = 61.75% and HA = 46.03%] during the monomer extraction and wet sterilization, while the option of dry radiation sterilization (IM-R lens) and hydration for 24 h prior to use showed relatively lower loss of drugs [timolol = 16.87%, bimatoprost = 47.95% and HA = 24.41%]. The in-vitro drugs release data of IM-R lens, showed sustained release for 72 h, with low burst release in comparison to the soaked (SM) and direct drug-laden contact lenses (DL). The in vivo drug release data in the rabbit tear fluid showed sustained release using IM-R lens in comparison to the SM lens and eye drop therapy. The burst release with the IM-R lens was many folds reduced, which could bypass the side effects associated with multiple eye drop therapy. The in vivo pharmacodynamic study in the rabbit model showed peak and valley profile with multiple eye drop therapy, while IM-R lens showed prolong reduction in intra ocular pressure (IOP) for 120 h. The study demonstrates the application of implantation technology to deliver multiple drug through contact lenses to treat glaucoma.

Novel Polyvinyl Pyrrolidone-Loaded Olopatadine HCl-Laden Doughnut Contact Lens to Treat Allergic Conjunctivitis

Olopatadine HCl is an antiallergic drug used for the management of allergic conjunctivitis. Currently, it is delivered via eye drop solution, which is highly inefficient due to low bioavailability. Silicone contact lenses can be used to sustain the release of ophthalmic drugs. However, the presence of drug alters the optical transmittance and physical properties of the contact lens. The objective was to design a novel polyvinyl pyrrolidone (PVP)-coated olopatadine-ethyl cellulose microparticles-laden doughnut contact lens to sustained ocular delivery with limited alteration to the optical and swelling properties of the contact lens. The doughnut was implanted within the periphery of the lens using modified casting technique. Olopatadine HCl was loaded by soaking (SM-OL), direct loading (DL-OL), and doughnut casting method (DNT-OL). PVP (comfort agent) was loaded on the surface of contact lens for all the batches via novel curing technique. The in vitro olopatadine HCl release data of SM-OL (up to 48-72 h) and DL-OL batches (up to 72 h) showed high burst release, whereas DNT-OL batch showed sustained release up to 120 h without significant (p > 0.05) alteration in the optical and swelling properties of contact lens. All the batches showed sustained release of PVP up to 120 h. The in vivo studies in the rabbit tear fluid showed improvement in the olopatadine HCl and PVP retention time in comparison to eye drop solution. The PVP-loaded DNT-OL-500 lens showed tear stabilization (comfort wear) in Schirmer strip test (rabbits) with no protein adherence in comparison to DNT-OL-500 lens without PVP. The study demonstrated the successful delivery of olopatadine HCl and PVP-K30 from the doughnut contact lens for the extended period with limited alteration to the optical and swelling properties of contact lens.

Bimatoprost Imprinted Silicone Contact Lens to Treat Glaucoma

Bimatoprost is widely used for the management of glaucoma. Currently, it is delivered via eye drop solution, which is highly inefficient due to low bioavailability. To control the release of ocular drugs, contact lenses are used by scientists. However, the conventional soaking method showed high burst release due to absence of any efficient controlling membrane. The objective of the paper was to apply molecular imprinting technology to improve the loading of bimatoprost from the soaking solution and to sustain the release of drug from the contact lens. The bimatoprost was loaded by conventional soaking method (BT-SM) and compared with the molecular imprinted contact lenses (BT-MP). The loading of bimatoprost by molecular imprinting technology affect the swelling of the contact lens; however, the batch BT-MP-10 did not showed significant alterations. The uptake study showed improvement in the bimatoprost loading by molecular imprinting technology in comparison to the conventional soaking technology. The in vitro bimatoprost release data showed improvement in the bimatoprost release rate profiles with BT-MP contact lenses (up to 36-60 h) lenses in comparison to BT-SM contact lenses (up to 24-36 h). The in vivo rabbit tear fluid data with BT-MP batch showed improvement in the bimatoprost retention time in comparison to BT-SM contact lens and eye drop solution. The rabbit model failed to respond bimatoprost; thus, the efficacy studies need to be conducted on canines or human primates. The paper revealed the potential of using molecular imprinting technology to improve the uptake of bimatoprost and to achieve sustain release kinetics without altering the swelling, transmittance and folding endurance properties of the contact lens.

S, Akshara MR, N. K, Zaidi ZS, Iqbal SF, Misra SK. Advances in chemistry and composition of soft materials for drug releasing contact lenses

Ocular drug delivery has always been a challenging feat to achieve in the field of medical sciences. One of the existing methods of non-invasive ocular drug delivery is the use of eye drops. However, drugs administered through these formulations have low bioavailability in the ocular system. This limitation can been overcome by using contact lenses as drug delivery vehicles. According to USA FDA definitions they can be categorized into two main categories-hard and soft contact lenses. Based on the material properties, hard contact lenses are mostly produced from polymers of acrylate monomers such as MMA (methyl methacrylate). These have the least water retention capacity, thereby, having minimal ability to diffuse oxygen into the corneal layer and are not ideal for long term use. Soft material contact lenses are flexible and are mainly hydrogel based. They have higher water retention capacities as compared to rigid contact lenses, which gives them the ability to transmit oxygen to the corneal layer. These hydrogel based soft materials are mainly produced from polymers of acrylate monomers such as HEMA (hydroxyethyl methacrylate) and found to be better for drug delivery contact lenses. These polymer-based soft materials have been efficiently modified in terms of their chemistry to achieve diverse physicochemical properties to produce efficient ocular drug delivery systems. However, complications such as drug leaching during storage and distribution, sterilisation, preservation of integrity of the lens and the possibility of surface roughness due to the incorporated drug molecules still need to be optimised. This review highlights the chemistries of various polymeric molecules through which physicochemical properties can be modified to achieve optimum drug loading and sustained release of the drug for application in the ocular system.

Contact lens as controllable route for ocular drug delivery.

Novel drug delivery methods for the treatment of keratitis: moving away from surgical intervention

Introduction: Corneal ulceration is one of the leading causes of blindness especially in low- and mid-income countries (LMICs). Surgical treatment of microbial keratitis is associated with multiple challenges that include non-availability of donor corneal tissues, lack of trained corneal surgeons, and poor compliance to follow up care. As a result, the surgery fails in 70-90% cases. Therefore, improving outcome of medical treatment and thereby avoiding the need for the surgery is an unmet need in the care of corneal ulcer cases.Areas covered: In this review article, the authors have tried to compile information on the novel drug-delivery systems that have potential to enhance success of medical management. We have discussed the following systems: cyclodextrins, gel formulations, colloidal system, nanoformulations, drug-eluting contact lens, microneedle patch, and ocular inserts.Expert opinion: The goals of corneal ulcer treatment are as follows: rapid eradication of causative microorganisms, control of damage from induced inflammation and microbial toxins, and facilitation of repair. The ocular surface anatomy poses several challenges for drug delivery using standard topical therapy. The novel drug-delivery systems mentioned above aim to enhanced tear solubility; superior stability; improved bio-availability; reduced toxicity; besides facilitating targeted drug delivery and convenience of administration.

Fungal keratitis: Pathogenesis, diagnosis and prevention

As a kind of serious, potentially sight-threatening corneal infections with poor prognosis, fungal keratitis can bring a heavy economic burden to patients and seriously affect the quality of life, especially those in developing countries where fungal keratitis is more prevalent. Typical clinical features include immune rings, satellite lesions, pseudopods, hypha moss, hypopyon and endothelial plaques. The ideal therapeutic effects could not be achieved by current treatments for many reasons. Therefore, under the current status, understanding the pathogenesis, early diagnosis and prevention strategies might be of great importance. Here, in this review, we discuss the recent progresses that may advance our understanding of pathogenesis, early diagnosis and prevention of fungal keratitis.

Traditional, unfairly forgotten, rarely used and promising drug delivery methods in ophthalmology: a clinical interpretation (part 1)

Ocular targeted drug delivery is one of the most challenging tasks for pharmaceutical researchers and practical ophthalmologists. The possibilities of drug delivery to the eye are naturally determined by the anatomical structure of the eye and its physiological properties, which restrict the period when therapeutically required drug concentration could be maintained. Combined drug delivery schemes may, potentially, improve the patient’s acceptance of treatment, reduce side effects, increase efficacy, and eventually preserve vision.

Effect of gold nanoparticles on timolol uptake and its release kinetics from contact lenses: In vitro and in vivo evaluation

Contact lenses are ideally suited for extended drug delivery to the ocular tissues, but incorporation of any particulate system affects the critical properties of the contact lens. Timolol loading by the conventional soaking method does not significantly alter the critical properties of the contact lens. However, there are challenges of low drug loading and high burst release. This research work aimed to investigate the effect of gold nanoparticles (GNPs) on loading and its release kinetics from the contact lens using the soaking method. In one approach, GNPs were loaded into the timolol soaking solution (GNPs-SS), and in another approach, GNPs were incorporated into the contact lenses (GNPs-CL) during fabrication. The contact lenses were soaked at two different concentrations of timolol (i.e., 2 mg/ml and 4 mg/ml). Swelling and optical transmittance were not significantly affected by the presence of GNPs in the contact lenses. A significant uptake/loading of timolol using the GNPs in both the approaches was observed. The in vitro flux data showed no significant improvement in the release rate profiles of timolol when using both approaches. However, the in vivo study in the rabbit tear fluid showed high timolol concentration with the GNPs-laden contact lens at all timepoints in comparison to the soaked contact lenses without GNPs. The in vivo pharmacodynamic study in rabbits showed a 2 mmHg average fall in intraocular pressure (72 h) using the GNPs-laden contact lenses, while the soaked contact lenses without GNPs and eye drops solution (0.5 %w/v) showed 2 mmHg. The drug distribution study in the ocular tissue showed a significant improvement in the drug deposition with the GNPs-laden contact lenses in the ciliary muscle and conjunctiva. This study successfully demonstrated the potential of GNPs to enhance the uptake of drug from the drug soaking solution to treat glaucoma without compromising the critical properties of contact lens. STATEMENT OF SIGNIFICANCE: In this study, we have overcome the limitation of the conventional soaking method of low drug loading and high burst release from the contact lenses. We have investigated the effect of gold nanoparticles (GNPs) on the timolol loading and its release kinetics from the contact lenses. The study revealed the potential of GNPs to enhance the uptake of timolol from the timolol soaking solution to treat glaucoma without compromising the critical lens properties.

Innovative Development of Contact Lenses

Contact lenses have been a common means of vision correction for more than half a century. Recent developments have raised the possibility that the next few decades will see a considerable broadening of the range of applications for contact lenses, with associated expansions in the number and type of individuals who consider them a valuable option. The novel applications of contact lenses include treatment platforms for myopic progression, biosensors, and ocular drug delivery. Orthokeratology has shown the most consistent treatment for myopia control with the least side effects. Recent work has resulted in commercialization of a device to monitor intraocular pressure for up to 24 hours, and extensive efforts are underway to develop a contact lens sensor capable of continuous glucose tear film monitoring for the management of diabetes. Other studies on drug-eluting contact lenses have focused on increasing the release duration through molecular imprinting, use of vitamin E, and increased drug binding to polymers by sandwiching a poly (lactic-co-glycolic acid) layer in the lens. This review demonstrates the potential for contact lenses to provide novel opportunities for refractive management, diagnosis, and management of diseases.

Therapeutic Contact Lenses with Polymeric Vehicles for Ocular Drug Delivery: A Review

The eye has many barriers with specific anatomies that make it difficult to deliver drugs to targeted ocular tissues, and topical administration using eye drops or ointments usually needs multiple instillations to maintain the drugs’ therapeutic concentration because of their low bioavailability. A drug-eluting contact lens is one of the more promising platforms for controllable ocular drug delivery, and, among various manufacturing methods for drug-eluting contact lenses, incorporation of novel polymeric vehicles with versatile features makes it possible to deliver the drugs in a sustained and extended manner. Using the diverse physicochemical properties of polymers for nanoparticles or implants that are selected according to the characteristics of drugs, enhancement of encapsulation efficiency and prolonged drug release are possible. Even though therapeutic contact lenses with polymeric vehicles allow us to achieve sustained ocular drug delivery, drug leaching during storage and distribution and the possibility of problems related to surface roughness due to the incorporated vehicles still need to be discussed before application in a real clinic. This review highlights the overall trends in methodology to develop therapeutic contact lenses with polymeric vehicles and discusses the limitations including comparison to cosmetically tinted soft contact lenses.

Wearables in Medicine

Wearables as medical technologies are becoming an integral part of personal analytics, measuring physical status, recording physiological parameters, or informing schedule for medication. These continuously evolving technology platforms do not only promise to help people pursue a healthier life style, but also provide continuous medical data for actively tracking metabolic status, diagnosis, and treatment. Advances in the miniaturization of flexible electronics, electrochemical biosensors, microfluidics, and artificial intelligence algorithms have led to wearable devices that can generate real-time medical data within the Internet of things. These flexible devices can be configured to make conformal contact with epidermal, ocular, intracochlear, and dental interfaces to collect biochemical or electrophysiological signals. This article discusses consumer trends in wearable electronics, commercial and emerging devices, and fabrication methods. It also reviews real-time monitoring of vital signs using biosensors, stimuli-responsive materials for drug delivery, and closed-loop theranostic systems. It covers future challenges in augmented, virtual, and mixed reality, communication modes, energy management, displays, conformity, and data safety. The development of patient-oriented wearable technologies and their incorporation in randomized clinical trials will facilitate the design of safe and effective approaches.

Contact lenses for ophthalmic drug delivery

Contact lenses as a means to deliver pharmaceuticals to the eye have seen a significant increase in research interest in the past few years. This review will detail the in vitro experiments which have investigated use of these contact lenses in the context of the desired pharmacological treatment goals in the management of infectious, inflammatory, allergic and glaucomatous diseases of the eye. The techniques researchers have employed to modify and tailor drug release rates from these materials, including the use of vitamin E diffusion barriers, modified ionicity, molecular imprinting and incorporation of drug reservoirs, will be discussed, as well as their impact on drug release kinetics. Finally, the demonstration of the feasibility of these materials when applied in vivo in animal models as well as in humans with and without disease will be presented and their results discussed relating to their implications for the future of the field.

Ophthalmic gels: Past, present and future

Aqueous gels formulated using hydrophilic polymers (hydrogels) along with those based on stimuli responsive polymers (in situ gelling or gel forming systems) continue to attract increasing interest for various eye health-related applications. They allow the incorporation of a variety of ophthalmic pharmaceuticals to achieve therapeutic levels of drugs and bioactives at target ocular sites. The integration of sophisticated drug delivery technologies such as nanotechnology-based ones with intelligent and environment responsive systems can extend current treatment duration to provide more clinically relevant time courses (weeks and months instead of hours and days) which will inevitably reduce dose frequency, increase patient compliance and improve clinical outcomes. Novel applications and design of contact lenses and intracanalicular delivery devices along with the move towards integrating gels into various drug delivery devices like intraocular pumps, injections and implants has the potential to reduce comorbidities caused by glaucoma, corneal keratopathy, cataract, diabetic retinopathies and age-related macular degeneration. This review describes ophthalmic gelling systems with emphasis on mechanism of gel formation and application in ophthalmology. It provides a critical appraisal of the techniques and methods used in the characterization of ophthalmic preformed gels and in situ gelling systems along with a thorough insight into the safety and biocompatibility of these systems. Newly developed ophthalmic gels, hydrogels, preformed gels and in situ gelling systems including the latest in the area of stimuli responsive gels, molecularly imprinted gels, nanogels, 3D printed hydrogels; 3D printed devices comprising ophthalmic gels are covered. Finally, new applications of gels in the production of artificial corneas, corneal wound healing and hydrogel contact lenses are described.

Co-delivery of timolol and hyaluronic acid from semi-circular ring-implanted contact lenses for the treatment of glaucoma: in vitro and in vivo evaluation

Controlled drug release from semi-circular drug-loaded ring-implanted contact lenses.

Release of Moxifloxacin from Contact Lenses Using an In Vitro Eye Model: Impact of Artificial Tear Fluid Composition and Mechanical Rubbing

PURPOSE

The aim of this study was to evaluate and compare the release of moxifloxacin from a variety of daily disposable (DD) contact lenses (CLs) under various conditions using a novel in vitro eye model.

METHODS

Four commercially available DD conventional hydrogel (CH) CLs (nelfilcon A, omafilcon A, etafilcon A, and ocufilcon B) and three silicone hydrogel (SH) CLs (somofilcon A, narafilcon A, and delefilcon A) were evaluated. These lenses were incubated in moxifloxacin for 24 hours. The release of the drug was measured using a novel in vitro model in three experimental conditions: (1) phosphate buffered saline (PBS); (2) artificial tear solution (ATS) containing a variety of proteins and lipids; and (3) ATS with mechanical rubbing produced by the device.

RESULTS

Overall, CH CLs had a higher drug release than SH CLs (P < 0.05) under all conditions. Typically, a higher drug release was observed in PBS than ATS (P < 0.05). For CH, drug release was found to be higher in ATS with rubbing than PBS or ATS (P < 0.05). For most lens types, ATS with rubbing produced higher drug release than ATS alone (P < 0.05). Generally, the release kinetics for all conditions were sustained over the 24-hour testing period, and no burst release was observed (P < 0.05).

CONCLUSIONS

Moxifloxacin release from a CL into ATS is lower when compared to release into PBS. When mechanical rubbing is introduced, the amount of drugs released is increased.

TRANSLATIONAL RELEVANCE

Results suggest that sophisticated in vitro models are necessary to adequately model on-eye drug release from CL materials.