Design, validation and performance of aspartate aminotransferase- and lactate dehydrogenase-reporting algorithms for haemolysed specimens including correction within quality specifications

Adjustment of lactate dehydrogenase concentration results according to the haemolysis index following in vitro haemolysis

In the presence of haemolysis, the interpretation of the Lactate dehydrogenase (LDH) activity result is a major operational challenge for medical laboratories: if the origin is intravascular, then the measurement will reflect the clinical reality, but in extravascular haemolysis, the laboratory will be confronted with an artefactual increase leading to false-positive high results. The aim of our study was to evaluate the adjustment of LDH concentration results according to the haemolysis index (HI). After designed a mathematical model to correct the LDH measured as a function of the haemolysis index using a Cobas 8000 analyser (Roche diagnostics, Mannheim, Germany), LDH measurement of seventy-four duplicate samples were tested before and after exposure to extravascular haemolysis process. After in vitro haemolysis process, a significant increase haemolysis index (Man-Whitney U-Test p < 0.0001) were observed. Before process the HI median was 4 [2.0 - 6.75] and after HI median was 18 [10 - 35.75]. Without correction, LDH results showed a significant increase (p < 0.001) after haemolysis process and substantial analytical discrepancies (31/74) were observed according to TEa of CLIA. After correction, data showed no significant difference (p = 0.497) and the mathematical algorithm allowed to reduce the analytical discrepancies (2/74). If haemolysis was present in vitro, the mathematical algorithm increased the accuracy of the LDH results. However, the lack of discrimination between in vivo and in vitro haemolysis requires caution and the results should be reported only as a commentary to inform the clinician.

Lung cancer tumor marker analysis: A clinical laboratory perspective

 Clinical laboratories are responsible for performing lung cancer tumor marker testing as part of routine clinical care. It is their responsibility to guarantee that the reported tumor marker results are reliable and meet the necessary quality standards for proper clinical use. During the different laboratory phases, pre-analytical, analytical and post-analytical, specific steps and processes can introduce errors and generate incorrect clinical interpretation. This editorial briefly outlines critical laboratory issues related to lung cancer tumor markers, specific for each of these three laboratory phases.

Self-sampling of blood using a topper and pediatric tubes; a prospective feasibility study for PSA analysis using 120 prostate cancer patients

OBJECTIVES

Self-collection of blood for diagnostic purposes by blood collection assist devices (BCAD) has gained a lot of momentum. Nonetheless, there are a lack of studies demonstrating the feasibility and reliability of self-collecting capillary blood for routine (immuno)chemistry testing. In this study we describe the topper technology together with pediatric tubes to enable self-collection of blood and investigated its feasibility for PSA testing by prostate cancer patients.

METHODS

A total of 120 prostate cancer patients for which a routine follow-up PSA test was requested, were included in this study. Patients received instruction materials and the blood-collection device consisting of a topper, pediatric tube and base-part, and performed the blood collection procedure themselves. Afterwards a questionnaire was filled-in. Finally, PSA was measured on a Roche Cobas Pro.

RESULTS

The overall self-sampling success rate was 86.7 %. Furthermore, when specified per age category, a 94.7 % success rate for patients under 70 years and a 25 % success rate for patients of 80 years and older was observed. Venous and self-collected PSA were highly comparable when analyzed by Passing-Bablok regression with a slope of 0.99 and intercept of 0.00011, Spearmans correlation coefficient (0.998) and average self-collected PSA recovery of 99.8 %.

CONCLUSIONS

Evidence is presented that self-collected capillary blood by topper and pediatric tube from the finger is feasible, particularly for patients under 70 years. Furthermore, capillary blood self-sampling did not compromise any of the PSA test results. Future validation in a real-world setting, without supervision and including sample stability and logistics, is required.

Technical quality assurance and quality control for medical laboratories: a review and proposal of a new concept to obtain integrated and validated QA/QC plans

Technical quality assurance (QA) and quality control (QA/QC) are important activities within medical laboratories to ensure the adequate quality of obtained test results. QA/QC tools available at medical laboratories include external QC and internal QC, patient-based real-time quality control (PBRTQC) tools such as moving average quality control (MAQC), limit checks, delta checks, and multivariate checks, and finally, analyzer flagging. Recently, for PBRTQC tools, new optimization and validation methods based on error detection simulation have been developed to obtain laboratory-specific insights into PBRTQC error detection. These developments have enabled implementation and application of these individual tools in routine clinical practice. As a next step, they also enable performance comparison of the individual QA/QC tools and integration of all the individual QA/QC tools in order to obtain the most powerful and efficient QA/QC plans. In this review, a brief overview of the individual QA/QC tools and their characteristics is provided and the error detection simulation approaches are explained. Finally, a new concept entitled integrated quality assurance and control (IQAC) is presented. To enable IQAC, a conceptual framework is suggested and demonstrated for sodium, based on available published data. The proposed IQAC framework provides ways and tools by which the performance of different QA/QC tools can be compared in a so-called QA/QC error detection table to enable optimization and validation of the overall QA/QC plan in terms of alarm rate as well as pre-analytical, analytical, and post-analytical error detection performance.

Demonstrating the feasibility of accurately and reliably correcting potassium results for mildly hemolytic samples using a new experimental design

BACKGROUND AND AIMS

For several decades, there has been an ongoing debate about the appropriateness and reliability of correcting potassium concentration results for hemolyzed samples. As part of implementing a new Roche Cobas Pro analyzer system the possibility of correcting potassium results in hemolytic samples using a new, thorough experimental design, was investigated.

MATERIALS AND METHODS

The relationship between hemolytic index (HI) and increases in potassium concentration was studied by performing a linear regression on hemolysate dilution series (HI 0-160 mg/dL) from 20 left-over patient samples. The obtained correction procedure was validated using another 20 left-over patient samples. Corrections were accepted according to a correction concordance of 100% within the total allowable error criterion of 4.85%.

RESULTS

The obtained reporting procedure was: HI 0-17 quantitative potassium reporting, HI 18-100 correct potassium for HI, and report as text including a disclaimer for in vivo hemolysis; samples were rejected for HI > 100. In the validation cohort, 70/70 samples eligible for correction were within the TEa criterion. The maximum negative and positive errors were -2.8% and 2.9%, respectively.

CONCLUSION

Correcting potassium concentration results in a designated HI range is feasible and increases the accuracy the potassium results in samples with mild in vitro hemolysis.