Effect of Expertise on Shoulder and Upper Limb Kinematics, Electromyography, and Estimated Muscle Forces During a Lifting Task

Is an ellipsoid surface suitable to model the scapulothoracic sliding plane?

Closed loop kinematic chain approaches are commonly used to assess scapular kinematics but with heterogeneous ellipsoid calibration procedures. This study aimed to assess whether an ellipsoid surface can model the scapulothoracic sliding plane and determine the optimal number of static poses to calibrate the ellipsoid parameters. An intracortical pin with a rigid cluster of four reflective markers was inserted into the left scapular spine of two healthy males (P1 and P2). They performed arm elevations, internal rotations, ball throwing, hockey shooting, and eating movements. Ellipsoid radii and center location were functionally calibrated for each participant and each movement, either based on all frames of a movement or based on a reduced number of frames (from 3 to 200 equally position-distributed frames). Across both participants and all movements, ellipsoid radii varied up to 10.2 cm, 3.9 cm, and 18.4 cm in the antero-posterior, medio-lateral, and cranio-caudal directions, respectively. When all frames of a movement were considered for calibration, the median scapula-to-ellipsoid distance was, on average, 0.52 mm and 0.38 mm for P1 and P2, respectively. When only five frames were considered for ellipsoid calibration, the scapula-to-ellipsoid median distance slightly increased with 0.57 mm and 0.47 mm for P1 and P2, respectively. To conclude, this study highlights that an ellipsoid surface may effectively be appropriate to model the scapulothoracic sliding plane, especially when the calibration is functional, participant- and movement-specific. Furthermore, the number of poses required for the ellipsoid calibration can be reduced to five, minimizing the experimental cost.

A first step towards a framework for interventions for individual working practice to prevent work-related musculoskeletal disorders: a scoping review

BACKGROUND

Work-related musculoskeletal disorders (WMSDs) are a key topic in occupational health. In the primary prevention of these disorders, interventions to minimize exposure to work-related physical risk factors are widely advocated. Besides interventions aimed at the work organisation and the workplace, interventions are also aimed at the behaviour of workers, the so-called individual working practice (IWP). At the moment, no conceptual framework for interventions for IWP exists. This study is a first step towards such a framework.

METHODS

A scoping review was carried out starting with a systematic search in Ovid Medline, Ovid Embase, Ovid APA PsycInfo, and Web of Science. Intervention studies aimed at reducing exposure to physical ergonomic risk factors involving the worker were included. The content of these interventions for IWP was extracted and coded in order to arrive at distinguishing and overarching categories of these interventions for IWP.

RESULTS

More than 12.000 papers were found and 110 intervention studies were included, describing 810 topics for IWP. Eventually eight overarching categories of interventions for IWP were distinguished: (1) Workplace adjustment, (2) Variation, (3) Exercising, (4) Use of aids, (5) Professional skills, (6) Professional manners, (7) Task content & task organisation and (8) Motoric skills.

CONCLUSION

Eight categories of interventions for IWP are described in the literature. These categories are a starting point for developing and evaluating effective interventions performed by workers to prevent WMSDs. In order to reach consensus on these categories, an international expert consultation is a necessary next step.

A Simple Method to Optimally Select Upper-Limb Joint Angle Trajectories from Two Kinect Sensors during the Twisting Task for Posture Analysis

A trunk-twisting posture is strongly associated with physical discomfort. Measurement of joint kinematics to assess physical exposure to injuries is important. However, using a single Kinect sensor to track the upper-limb joint angle trajectories during twisting tasks in the workplace is challenging due to sensor view occlusions. This study provides and validates a simple method to optimally select the upper-limb joint angle data from two Kinect sensors at different viewing angles during the twisting task, so the errors of trajectory estimation can be improved. Twelve healthy participants performed a rightward twisting task. The tracking errors of the upper-limb joint angle trajectories of two Kinect sensors during the twisting task were estimated based on concurrent data collected using a conventional motion tracking system. The error values were applied to generate the error trendlines of two Kinect sensors using third-order polynomial regressions. The intersections between two error trendlines were used to define the optimal data selection points for data integration. The finding indicates that integrating the outputs from two Kinect sensor datasets using the proposed method can be more robust than using a single sensor for upper-limb joint angle trajectory estimations during the twisting task.

Changes in Muscle Activation During and After a Shoulder-Fatiguing Task: A Comparison of Elite Female Swimmers and Water Polo Players

This study compared female athletes with different aquatic sports expertise in their neuromuscular activation before, during, and after a shoulder internal rotation fatigue protocol. Eleven water polo players, 12 swimmers, and 14 controls completed concentric maximal voluntary external and internal shoulder rotations before and after a fatigue protocol consisting of concentric internal rotations at 50% of maximal voluntary contraction for at least 3 min or until reporting a rating of perceived effort RPE of 8/10 or higher. Muscle activation was measured for the maximal voluntary contractions, as well as for the first (T1), middle (T2), and third (T3) minute of the fatigue protocol using surface electromyography (EMG) on pectoralis major, anterior and posterior deltoid, upper and middle trapezius, and latissimus dorsi. Intramuscular EMG was used for supraspinatus, infraspinatus, and subscapularis. Pre-fatigue internal rotation torque was significantly correlated with shorter task duration (r = −0.39, p = 0.02), with water polo players producing significantly greater torque than controls but having significantly lower endurance. Swimmers demonstrated decreased latissimus dorsi activation at T3 compared to T2 (p = 0.020, g = 0.44) and T1 (p = 0.029, g = 0.74), differing from water polo players and controls who exhibited increased agonist activation and decreased activation of stabilizers. Comparing the pre-fatigue to the post-fatigue maximal shoulder rotations, water polo players had decreased activation in subscapularis (p = 0.018, g = 0.67); all groups had decreased activation in latissimus dorsi (p < 0.001), though swimmers demonstrated a large effect (g = 0.97); and controls had decreased activation in supraspinatus (p = 0.005, g = 0.71). Together, these results suggest that sports expertise may be associated with different muscle activation both while and after fatigue is induced. Further research should continue to explore sports-specific patterns of muscle recruitment and fatigue adaptations, as well as if certain strategies are adaptive or maladaptive. This may have important consequences for injury prevention among athletes who perform repetitive overhead movements in their sports and who are susceptible to overuse injuries.

Closed-loop multibody kinematic optimization coupled with double calibration improves scapular kinematic estimates in asymptomatic population

Non-invasive methods still need to better estimate scapular kinematics because of soft tissue artifact issue. This study aimed to develop and assess new procedures to estimate scapular kinematics by combining closed kinematic chain optimization and double calibration. Sixteen healthy volunteers performed static postures mimicking analytical and daily living movements. Scapulo-thoracic angles were computed either with a scapula locator (Ref), or with a closed-loop multibody kinematic optimization (Ell) or with double calibration involving linear (DClin), exponential (DCexp) or logarithmic (DClog) correction. Double calibration corrections enforced scapulo-thoracic angles to be the same than those measured with Ref at the end of the movement performed. DClin and DClog significantly (p < 0.01) reduced scapulo-thoracic misorientation for at least the second third of the movement with averaged improvement ranging from 9° to 32°. Moreover, for arm elevation in the sagittal plane, internal rotations and mimicking hair combing, the beneficial effect of DClin and DClog propagates up to half of the movement. To conclude, when a kinematic chain is required, coupling double calibration (using either linear or logarithmic correction), to a closed-loop multibody kinematic optimization is an efficient and fast method in regard with improvement in scapular kinematic estimates in healthy population.