An interspecies comparison of the temporomandibular joint disc

Biomimetic Scaffolds for Regeneration of Temporomandibular Joint Disc: A Narrative Review

Defects and dysfunctions of temporomandibular joint (TMJ) disc are responsible for the majority of TMJ diseases. Current treatments in this matter are usually short-term and only palliative, thus an alternative treatment that offers long-lasting repair is in great demand. In recent years great attempts have been made to prepare an ideal scaffold, which best resembles the native TMJ disc in characteristics such as mechanical, physical and biological properties. This narrative review focuses on developments of the recent ten years in fabrication of scaffolds using decellularized tissues, natural and synthetic biomaterials for regeneration of TMJ disc and compared their properties. PubMed and Google Scholar databases were searched using the following keywords ("TMJ" OR "temporomandibular joint" OR "TMD" OR "temporomandibular disease") AND ("scaffold" OR "hydrogels"). Randomized controlled trials, randomized clinical trials, case-controls, case reports, and animal studies were included. Comments, systematic reviews, meta-analyses, and non-English papers were excluded. The study concluded that hybrid scaffolds have exhibited favorable cell attachment and proliferation. Synthetic scaffolds have shown promise in providing better control over structural properties; however, additional processes are often required to provide biomimetic cell signaling. While there is still much to learn about the ideal scaffold for TMJ disc regeneration, both natural and synthetic scaffolds have shown promise in achieving the functional, structural, biological, and mechanical properties of a native TMJ disc.

Microstructural, Micromechanical Atlas of the Temporomandibular Joint Disc

The temporomandibular joint (TMJ) disc is mainly composed of collagen, with its arrangement responding to efficient stress distribution. However, microstructural and micromechanical transformations of the TMJ disc under resting, functional, and pathological conditions remain unclear. To address this, our study presents a high-resolution microstructural and mechanical atlas of the porcine TMJ disc. First, the naive microstructure and mechanical properties were investigated in porcine TMJ discs (resting and functional conditions). Subsequently, the perforation and tear models (pathological conditions) were compared. Following this, a rabbit model of anterior disc displacement (abnormal stress) was studied. Results show diverse microstructures and mechanical properties at the nanometer to micrometer scale. In the functional state, gradual unfolding of the crimping cycle in secondary and tertiary structures leads to D-cycle prolongation in the primary structure, causing tissue failure. Pathological conditions lead to stress concentration near the injury site due to collagen interfibrillar traffic patterns, resulting in earlier damage manifestation. Additionally, the abnormal stress model shows collagen damage initiating at the primary structure and extending to the superstructure over time. These findings highlight collagen's various roles in different pathophysiological states. Our study offers valuable insights into TMJ disc function and dysfunction, aiding the development of diagnostic and therapeutic strategies for TMJ disorders, as well as providing guidance for the design of structural biomimetic materials.

Specific tissue engineering for temporomandibular joint disc perforation

BACKGROUND

The temporomandibular joint (TMJ) disc is a critical fibrocartilaginous structure with limited regenerative capacity in the oral system. Perforation of the TMJ disc can lead to osteoarthritis and ankylosis of the TMJ because of the lack of disc protection. Clinical treatments for TMJ disc perforation, such as discectomy, hyaluronic acid injection, endoscopic surgery and high position arthroplasty of TMJ, are questionable with regard to long-term outcomes, and only three fourths of TMJ disc perforations are repairable by surgery, even in the short-term. Tissue engineering offers the potential for cure of repairable TMJ disc perforations and regeneration of unrepairable ones.

OBJECTIVES

This review discusses the classification of TMJ disc perforation and defines typical TMJ disc perforation. Advancements in the engineering-based repair of TMJ disc perforation by stem cell therapy, construction of a disc-like scaffold and functionalization by offering bioactive stimuli are also summarized in the review, and the barriers developing engineering technologies need to overcome to be popularized are discussed.

Exploring the Use of Animal Models in Craniofacial Regenerative Medicine: A Narrative Review

The craniofacial region contains skin, bones, cartilage, the temporomandibular joint (TMJ), teeth, periodontal tissues, mucosa, salivary glands, muscles, nerves, and blood vessels. Applying tissue engineering therapeutically helps replace lost tissues after trauma or cancer. Despite recent advances, it remains essential to standardize and validate the most appropriate animal models to effectively translate preclinical data to clinical situations. Therefore, this review focused on applying various animal models in craniofacial tissue engineering and regeneration. This research was based on PubMed, Scopus, and Google Scholar data available until January 2023. This study included only English-language publications describing animal models' application in craniofacial tissue engineering (in vivo and review studies). Study selection was based on evaluating titles, abstracts, and full texts. The total number of initial studies was 6454. Following the screening process, 295 articles remained on the final list. Numerous in vivo studies have shown that small and large animal models can benefit clinical conditions by assessing the efficacy and safety of new therapeutic interventions, devices, and biomaterials in animals with similar diseases/defects to humans. Different species' anatomical, physiologic, and biological features must be considered in developing innovative, reproducible, and discriminative experimental models to select an appropriate animal model for a specific tissue defect. As a result, understanding the parallels between human and veterinary medicine can benefit both fields.

Interspecies comparison of temporomandibular joint condylar cartilage extracellular matrix from macro to microscopy

Interspecies comparisons of the extracellular matrix of temporomandibular joint (TMJ) condylar cartilage are necessary to elucidate the mechanisms underlying its superior mechanical properties, to guide the construction of animal models of TMJ-related diseases, and to establish standards for the engineering of TMJ condylar cartilage. Here we characterize and compare TMJ condylar cartilage from six different species from a materials science perspective, including structure, composition and mechanical properties from the macroscopic to the microscopic level. The gross morphology showed obvious interspecies differences in size and shape, which may be related to the different joint motion patterns. Although the condylar cartilage of all species can be divided histologically into a superficial fibrous layer and a deep hyaline layer, there are significant interspecies differences in the microstructure of the fibrils in the two layers, mainly in the diameter of the fibrils. Compositionally, there were no significant differences in collagen composition between species, but the content of glycosaminoglycans (GAGs) decreased progressively with increasing body size, with the same results obtained by Safranin O staining and biochemical analysis. Mechanically, the elastic modulus of mouse condylar cartilage was significantly higher than that of the other species and tended to decrease with increasing body size. This study shows that the TMJ condylar cartilage of different species has its own specific structure-composition-mechanics matching characteristics for their unique masticatory stress dissipation, and differences in fibril diameter and GAGs content may be the two ultimate factors influencing the differences in cartilage mechanical properties between species, while the condylar cartilage of pigs is most similar to that of humans, suggesting that pigs may be a suitable animal model for TMJ studies.

Characterization of the Temporomandibular Joint Disc Complex in the Yucatan Minipig

The temporomandibular joint (TMJ) disc complex (i.e., the TMJ disc and its six attachments) is crucial to everyday functions such as mastication and speaking. The TMJ can be afflicted by many conditions, including disc displacement and defects. Pathologies of the TMJ disc complex most commonly present first as anterior disc displacement, which the field hypothesizes may implicate the two posterior attachments. As a result of anterior disc displacement, defects may develop in the lateral disc complex. Tissue engineering is poised to improve treatment paradigms for these indications of the TMJ disc complex by engineering biomimetic implants, but, first, gold-standard design criteria for such implants should be established through characterization studies. This study's objective was to characterize the structural, mechanical, biochemical, and crosslinking differences among the two posterior attachments and the lateral disc in the Yucatan minipig, a well-accepted TMJ animal model. In tension, it was found that the posterior inferior attachment (PIA) was significantly stiffer and stronger by 2.13 and 2.30 times, respectively, than the posterior superior attachment (PSA). It was found that collagen in both attachments was primarily aligned mediolaterally; however, the lateral disc was much more aligned and anisotropic than either attachment. Among the three locations, the PSA exhibited the greatest degree of heterogeneity and highest proportion of fat vacuoles. The PIA and lateral disc were 1.93 and 1.91 times more collagenous, respectively, by dry weight (DW) than the PSA. The PIA also exhibited 1.78 times higher crosslinking per DW than the PSA. Glycosaminoglycan per DW was significantly higher in the lateral disc by 1.48 and 5.39 times than the PIA and PSA, respectively. Together, these results establish design criteria for tissue-engineering of the TMJ disc complex and indicate that the attachments are less fibrocartilaginous than the disc, while still significantly contributing to the mechanical stability of the TMJ disc complex during articulation. These results also support the biomechanical function of the PIA and PSA, suggesting that the stiffer PIA anchors the disc to the mandibular condyle during articulation, while the softer PSA serves to allow translation over the articular eminence. Impact Statement Characterization of the temporomandibular joint (TMJ) disc complex (i.e., the disc and its attachments) has important implications for those aiming to tissue-engineer functional replacements and can help elucidate its biomechanical function. For example, the findings shown here suggest that the stiffer posterior inferior attachment anchors the disc during articulation, while the softer posterior superior attachment allows translation over the articular eminence.

Regenerative Engineering of a Biphasic Patient-Fitted Temporomandibular Joint Condylar Prosthesis

Regenerative medicine approaches to restore the mandibular condyle of the temporomandibular joint (TMJ) may fill an unmet patient need. In this study, a method to implant an acellular regenerative TMJ prosthesis was developed for orthotopic implantation in a pilot goat study. The scaffold incorporated a porous, polycaprolactone-hydroxyapatite (PCL-HAp, 20wt% HAp) 3D printed condyle with a cartilage-matrix-containing hydrogel. A series of material characterizations was used to determine the structure, fluid transport, and mechanical properties of 3D printed PCL-HAp. To promote marrow uptake for cell seeding, a scaffold pore size of 152 ± 68 μm resulted in a whole blood transport initial velocity of 3.7 ± 1.2 mm·s-1 transported to the full 1 cm height. The Young's modulus of PCL was increased by 67% with the addition of HAp, resulting in a stiffness of 269 ± 20 MPa for etched PCL-HAp. In addition, the bending modulus increased by 2.06-fold with the addition of HAp to 470 MPa for PCL-HAp. The prosthesis design with an integrated hydrogel was compared with unoperated contralateral control and no-hydrogel group in a goat model for 6 months. A guide was used to make the condylectomy cut, and the TMJ disc was preserved. MicroCT assessment of bone suggested variable tissue responses with some regions of bone growth and loss, although more loss may have been exhibited by the hydrogel group than the no-hydrogel group. A benchtop load transmission test suggested that the prosthesis was not shielding load to the underlying bone. Although variable, signs of neocartilage formation were exhibited by Alcian blue and collagen II staining on the anterior, functional surface of the condyle. Overall, this study demonstrated signs of functional TMJ restoration with an acellular prosthesis. There were apparent limitations to continuous, reproducible bone formation, and stratified zonal cartilage regeneration. Future work may refine the prosthesis design for a regenerative TMJ prosthesis amenable to clinical translation.

Decellularized-disc based allograft and xenograft prosthesis for the long-term precise reconstruction of temporomandibular joint disc

Currently, no effective disc reconstruction treatment strategy is clinically available for temporomandibular joint (TMJ) disc-related diseases. To address this, we developed a prosthesis construct with laser-drilled decellularized natural disc reinforced by polycaprolactone, which mimics the natural morphology, and structural, biomechanical and biological property of the TMJ disc. The construct demonstrated good biocompatibility, safety and immunological tolerance both in vitro, and in a rat subcutaneous model. During 6 months implantation in an allogeneic rabbit TMJ disc reconstruction model, the disc prosthesis maintained its integrity, collagen fiber-orientation, mechanical property, joint structural stability and prevented articular cartilage and bone from damage. Furthermore, the "upgraded" disc prosthesis obtained from decellularized porcine disc was implanted into a goat TMJ disc reconstruction model. The xenograft prosthesis, with strength and viscoelasticity similar to a natural TMJ disc, was able to restore the structure and function of TMJ up to 20 weeks. These results demonstrate the translational feasibility of an allogeneic or xenogeneic decellularized disc prosthesis for treatment of advanced TMJ disc-related diseases. STATEMENT OF SIGNIFICANCE: This study makes a significant contribution to TMJ disc disease treatment both in theory and in clinics, because: (1) it provided an innovative approach to prepare an artificial TMJ disc with decent mechanical properties and long-term condyle-protecting effect; (2) it specified an advanced decellularized method for fibrocartilage decellularization and xenograft application; (3) it developed a facile and reproducible TMJ disc reconstruction model not only for middle size animal but also for large animal study; (4) the comprehensive and unreported biomechanical tests on the natural TMJ discs would act as a valuable reference for further research in the field of artificial TMJ disc materials or TMJ disc tissue engineering; (5) it suggested a potential treatment for patients with severe TMJ diseases that were commonly met but difficult to treat in clinics.

Magnetic resonance imaging and fractal analysis findings in temporomandibular joints with disk perforation

OBJECTIVE

This study compared magnetic resonance imaging (MRI) findings and fractal dimension (FD) values in the temporomandibular joints (TMJs) of study patients with disk perforation vs control patients.

STUDY DESIGN

Of 75 TMJs examined with MRI for characteristics of the disk and condyle, 45 were included in the study group and 30 in the control group. MRI findings and FD values were compared for significance of differences between the groups. The frequency of subclassifications was analyzed for differences between the two forms of disk configuration and grades of effusion. Mean FD values were analyzed for differences among subclassifications of MRI findings and between groups.

RESULTS

Examination of MRI variables revealed that the study group had significantly greater frequencies of flattened disks, disk displacement, flattening and combined defects in condylar morphology, and grade 2 effusion (P = .001) Joints with perforated disks had a large percentage of normal disk-condyle relationships (73.3%). Significant differences were discovered between biconcave and flattened disk configuration in the frequencies of internal disk status and condylar morphology. FD values of all patients varied significantly among the subclassifications of disk configuration, internal disk status, and effusion. Mean FD values were significantly lower in the study group with perforated disks (1.07) compared with the control group (1.20, P = .001).

CONCLUSIONS

MRI variables and FD can be useful in investigating intra-articular TMJ status.

Ultra-High Modulus Hydrogels Mimicking Cartilage of the Human Body

The human body is comprised of numerous types of cartilage with a range of high moduli, despite their high hydration. Owing to the limitations of cartilage tissue healing and biological grafting procedures, synthetic replacements have emerged but are limited by poorly matched moduli. While conventional hydrogels can achieve similar hydration to cartilage tissues, their moduli are substantially inferior. Herein, triple network (TN) hydrogels are prepared to synergistically leverage intra-network electrostatic repulsive and hydrophobic interactions, as well as inter-network electrostatic attractive interactions. They are comprised of an anionic 1^st network, a neutral 2^nd network (capable of hydrophobic associations), and a cationic 3^rd network. Collectively, these interactions act synergistically as effective, yet dynamic crosslinks. By tuning the concentration of the cationic 3^rd network, these TN hydrogels achieve high moduli of ≈1.5 to ≈3.5 MPa without diminishing cartilage-like water contents (≈80%), strengths, or toughness values. This unprecedented combination of properties poises these TN hydrogels as cartilage substitutes in applications spanning articulating joints, intervertebral discs (IVDs), trachea, and temporomandibular joint disc (TMJ).

Influence of implant parameters on biomechanical stability of TMJ replacement: A finite element analysis

The articular disc reduces the stress distribution from the mandible to fossa. In total temporomandibular joint (TMJ) replacement, the implant is required to reduce the stress on fossa implant. Current studies lack standard and optimized parameters for the cylindrical dome on Christensen TMJ implant collar. This study briefed a novel TMJ implant head design and investigates the biomechanical behaviour by considering the articular disc. The radius of the head was varied with the height of the cylinder height to obtain the design of the experiment and the stress distribution was compared with an intact mandible-articular disc model by considering the viscoelastic property of the TMJ disc. The model was simulated at three different angles: 20°, 0° and -20° in the mediolateral direction to simulate the manducation. FEA analysis showed high stresses at the circular heads, and high strength is achieved with increased implant cylinder length and diameter. The results also showed a stress reduction of 50% on the fossa from the mandible. Hence, the newly designed head and suggested modifications may be used as a reference for further clinical improvement of Christensen TMJ as well as other TMJ implants.

Three-dimensional, biomimetic electrospun scaffolds reinforced with carbon nanotubes for temporomandibular joint disc regeneration

Temporomandibular disorder (TMD) remained a huge clinical challenge, with high prevalence but limited, unstable, and only palliative therapeutic methods available. As one of the most vulnerable sites implicated in TMD, the temporomandibular joint disc (TMJD) displayed a complicated microstructure, region-specific fibrocartilaginous distribution, and poor regenerative property, which all further hindered its functional regeneration. To address the problem, with versatile and relatively simple electrospinning (ELS) technique, our study successfully fabricated a biomimetic, three-dimensional poly (ϵ-caprolactone) (PCL)/polylactide (PLA)/carbon nanotubes (CNTs) disc scaffold, whose biconcave gross anatomy and regionally anisotropic microstructure recapitulating those of the native disc. As in vitro results validated the superior mechanical, bioactive, and regenerative properties of the biomimetic scaffolds with optimal CNTs reinforcement, we further performed in vivo experiments. After verifying its biocompatibility and ectopic fibrochondrogenicity in nude mice subcutaneous implantation models, the scaffolds guided disc regeneration and subchondral bone protection were also confirmed orthotopically in rabbits TMJD defected areas, implying the pivotal role of morphological cues in contact-guided tissue regeneration. In conclusion, our work represents a significant advancement in complex, inhomogeneous tissue engineering, providing promising clinical solutions to intractable TMD ailments. STATEMENT OF SIGNIFICANCE: Complex tissue regeneration remains a huge scientific and clinical challenge. Although frequently implicated in temporomandibular joint disorder (TMD), functional regeneration of injured temporomandibular joint disc (TMJD) is extremely hard to achieve, mainly because of the complex anatomy and microstructure with regionally variant, anisotropic fiber alignments in the native disc. In this study, we developed the biomimetic electrospun scaffold with optimal CNTs reinforcement and regionally anisotropic fiber orientations. The excellent mechanical and bioactive properties were confirmed both in vitro and in vivo, effectively promoting defected discs regeneration in rabbits. Besides demonstrating the crucial role of morphological biomimicry in tissue engineering, our work also presents a feasible clinical solution for complex tissue regeneration.

Morphologic and histologic characterization of sheep and porcine TMJ as large animal models for tissue engineering applications

Objective

The aim of this study was to compare and characterize the structural and ultrastructural organization of the temporomandibular joint (TMJ) between two large animal models for use in the development of tissue engineering strategies.

Materials and methods

Whole TMJs from sheep and pigs were evaluated with micro-computed tomography (μCT) for morphology and quantitative analyses of bone parameters. Histological examination was performed on the TMJ disc and its attachments to investigate regional distribution of collagen, elastin, and glycosaminoglycans (GAGs).

Results

μCT analyses demonstrate higher bone mineral density (BMD) in the temporal fossa compared to the mandibular condyle in both species, with this variable being significantly higher in sheep than pig. Quantitative morphometry of the trabecular condyle reveals no statistical differences between the species. Histology demonstrates similar structural organization of collagen and elastin between species. Elastin staining was nearly twofold greater in sheep than in the pig disc. Finally, Safranin-O staining for GAGs in the TMJ disc was localized to the intermediate zone in the sheep but was absent from the porcine disc.

Conclusions

Our findings show some important differences in the pig and sheep TMJ μCT variables and histology and composition of the disc and discal attachment. These disparities likely reflect differences in masticatory and TMJ functional loading patterns between the two species and provide insights into large animal models towards human applications.

Clinical relevance

As with the established pig model, the sheep is a suitable large animal model for TMJ research such as regenerative strategies, with specific considerations for design parameters appropriate for human-analog applications.

Evaluation of Stress on Acupuncture with Nano-Etched and Diamond-Like Carbon (DLC) Coating Surface Modifications

The aim of the present study was to investigate the effect of nano-etched surface and diamond-like carbon (DLC) surface acupuncture needles on human pain perception, by finite element method (FEM). Skin models were reconstructed by 3D computer programs. The stress is an important role in acupuncture needle applications for clinical treatment. Many studies have investigated finite element researches for acupuncture; however, few have evaluated a model for acupuncture with and without\ modified surface. The results revealed that abnormal focusing stress was found when acupuncture with nano-etched surface. Moreover, the unbalance stress was found on the top of the skin model in the nano-etched group, the highest stress also appeared in the top region. Acupuncture with nano-etched surface would be an effective means for stimulating skin. These results indicate subtle but significant effects of acupuncture stimulation with nano-etched surface needles, compared to acupuncture with untreated needles in healthy participants.

Effect of region-dependent viscoelastic properties on the TMJ articular disc relaxation under prolonged clenching

The disc of the temporomandibular joint (TMJ) is located between the mandibular condyle and temporal bone, and has an important load-bearing and stress absorbing function. The TMJ disc presents viscoelastic characteristics that are largely dependent on its collagen fibre and proteoglycan composition and organization. The purpose of this study is to investigate the possible effects of region-specific dynamic viscoelastic properties on stress relaxation during prolonged clenching. Two finite element models were used to compare the stress distribution within the TMJ disc, namely, one with uniform disc material property and another one with region-specific disc material properties. Similar results were observed in both models with slight differences in the location of maximum stress. Larger stresses were observed in all cases for the model with uniform disc material property. Moreover, the higher values for the model with uniform disc material property appeared in the lateral region, while in the model with region-specific disc properties, these values moved to the lateral and central region. This investigation confirms that both models are sufficiently accurate to investigate stress distribution in the TMJ disc, and, particularly, the model with the region-specific disc material properties ensure better simulations of the TMJ disc behaviour.

3D-Printed Polycaprolactone Reinforced Hydrogel as an Artificial TMJ Disc

The replacement of a damaged temporomandibular joint (TMJ) disc remains a long-standing challenge in clinical settings. No study has reported a material with comprehensively excellent properties similar to a natural TMJ disc. In this work, we designed a novel artificial TMJ disc using polyvinyl alcohol (PVA) hydrogel crosslinked by cyclic freeze-thaw and reinforced by 3D-printed polycaprolactone (PCL) implants. The mechanical properties and surface morphologies of the artificial TMJ disc and the natural goat TMJ disc were tested and compared via compression, tensile, cyclic compression/tensile, creep, friction, scanning electron microscopy, and atomic force microscopy. The fibroblasts and chondrocytes were cultured on the artificial TMJ disc for 1, 3, and 5 d for cytotoxicity testing. Importantly, the artificial discs were placed into the TMJs of goats in an innovative way to induce disc defect repair for 12 wk. The PVA + PCL artificial disc demonstrated mechanical strength similar to that of natural disc, as well as 1) better fatigue resistance, viscoelasticity, and hydrophilicity; 2) less creep; and 3) low friction, cytotoxicity, and cell adhesion. By repairing the defects of the TMJ disc in goats, the artificial disc demonstrated the ability to maintain joint stability and protect condylar cartilage and bone from damage. These promising results indicate the feasibility of using a PVA + PCL artificial TMJ disc in a clinical context.

Comparison of the Trueness of Fits of the Biphasic Transverse Isotropic and Kelvin Models to the Tensile Behavior of Temporomandibular Joint Disc

This technical brief explores the validity and trueness of fit for using the transverse isotropic biphasic and Kelvin models (first and second order generalized) for characterization of the viscoelastic tensile properties of the temporomandibular joint (TMJ) discs from pigs and goats at a strain rate of 10 mm/min. We performed incremental stress-relaxation tests from 0 to 12% strain, in 4% strain steps on pig TMJ disc samples. In addition, to compare the outcomes of these models between species, we also performed a single-step stress-relaxation test of 10% strain. The transverse isotropic biphasic model yielded reliable fits in reference to the least root mean squared error method only at low strain, while the Kelvin models yielded good fits at both low and high strain, with the second order generalized Kelvin model yielding the best fit. When comparing pig to goat TMJ disc in 10% strain stress-relaxation test, unlike the other two Kelvin models, the transverse isotropic model did not fit well for this larger step. In conclusion, the second order Kelvin model showed the best fits to the experimental data of both species. The transverse isotropic biphasic model did not fit well with the experimental data, although better at low strain, suggesting that the assumption of water flow only applies while uncrimping the collagen fibers. Thus, it is likely that the permeability from the biphasic model is not truly representative, and other biphasic models, such as the poroviscoelastic model, would likely yield more meaningful outputs and should be explored in future works.

Articular Disc of a Human Temporomandibular Joint: Evaluation through Light Microscopy, Immunofluorescence and Scanning Electron Microscopy

The extracellular matrix of the articular disc in a temporomandibular joint (TMJ) is composed mainly of collagen I and elastin. The collagen is important for resisting tensile forces, while the elastin is responsible to maintain the shape after deformation. We studied the orientation of collagen and elastin in a normal human temporomandibular joint disc by light microscopy, immunofluorescence and scanning electron microscopy. Our results demonstrated that collagen and elastin run parallel to each other in the intermediate zone with an anteroposterior orientation. From here, the orientation of two fibers groups changes into a disordered arrangement in the transition zone. Numerous elastic fibers cross with the collagen fibers, defining an interwoven knitted arrangement. The evaluation of the disc-condyle relationship shows that the medial margin of the articular disc is inserted directly at the superficial layer of the mandibular condylar cartilage. Therefore, the tensile properties of the TMJ disc are expressed in the directions corresponding to the orientation of the collagen fibers, and the complex orientation of elastin with the collagen determines the maintaining of the shape after the stresses by the joint movements. Moreover, the direct anatomical relationship between the articular disc and the mandibular condyle makes a decisive contribution to the understanding of TMJ movements.

Mechanical characterization and viscoelastic model of the ovine temporomandibular joint Disc in indentation, uniaxial tension, and biaxial tension

There have been recent investigations into developing disc replacements and regenerative medicine to treat internal derangements of the temporomandibular joint (TMJ) disc. Previous attempts at disc replacements have faced challenges related in part to a limited understanding of the TMJ's complex mechanical environment. The purpose of this study was to characterize the mechanical behavior of the ovine TMJ disc and to derive viscoelastic constitutive models from the experimental data. Fresh ovine TMJ discs were tested in indentation stress-relaxation tests on the inferior surface, uniaxial tension tests to failure, and dynamic biaxial tensile tests. Results showed an order of magnitude stiffer behavior in tension in the anteroposterior (primary fiber) direction compared to the mediolateral direction. The stiffness in tension was much greater than in compression. Regional comparisons showed greater elastic moduli in indentation in the posterior and anterior bands compared to the central region. A hyper-viscoelastic constitutive model captured the dynamic stress-stretch behavior in both indentation and biaxial tension with good agreement. These data will support ongoing and future computational modeling of local TMJ mechanics, aid in biomaterials identification, and ultimately enhance development of implant designs for TMJ disc replacement.

Trueness of Fit of Biphasic Transversely Isotropic Parameters Model in the Porcine Temporomandibular Joint Disc and Mandibular Condylar Cartilage and Regional Dependence

Temporomandibular joint (TMJ) disorders (TMDs) are not well understood and the mechanical differences between the regions of the mandibular condylar cartilage (MCC) and the TMJ disc have not been thoroughly compared. As of now, there are no commercially available regenerative therapies for the TMJ. Elucidating the mechanical properties of these two structures of the articulating joint will help future efforts in developing tissue engineering treatments of the TMJ. In this study, we evaluate the compressive properties of the porcine disc and mandibular condylar cartilage by performing unconfined compression at 10% strain with 4.5%/min strain rate. Punches (4 mm biopsy) from both tissues were taken from five different regions of both the MCC and TMJ: anterior, posterior, lateral, medial, and central. Previously, theoretical models of compression in the porcine tissue did not fit the whole ramp-relaxation behavior. Thus, the data stress-relaxation was fitted to the biphasic transversely isotropic model, for both the TMJ disc and cartilage. From the results found in the disc, it was found that the posterior region had the highest values in multiple viscoelastic parameters when compared to the other regions. The mandibular condylar cartilage was only found to be significantly different in the transverse modulus between the posterior and lateral regions. Both the TMJ disc and MCC had similar magnitudes of values (for the modulus and other corresponding compressive properties) and behavior under this testing modality.

Temporomandibular joint imaging: current clinical applications, biochemical comparison with the intervertebral disc and knee meniscus, and opportunities for advancement

Temporomandibular disorders encompass multiple pathologies of the temporomandibular joint that manifest as middle/inner ear symptoms, headache, and/or localized TMJ symptoms. There is an important although somewhat limited role of imaging in the diagnostic evaluation of temporomandibular disorders. In this manuscript, we provide a comprehensive review of TMJ anatomy, outline potentially important features of TMJ disc ultrastructure and biochemistry in comparison with the intervertebral disc and knee meniscus, and provide imaging examples of the TMJ abnormalities currently evaluable with MRI and CT. In addition, we provide an overview of emerging and investigational TMJ imaging techniques in order to encourage further imaging research based on the biomechanical alterations of the TMJ disc.

Reduction of osteoarthritis severity in the temporomandibular joint of rabbits treated with chondroitin sulfate and glucosamine

Osteoarthritis is a degenerative disease that causes substantial changes in joint tissues, such as cartilage degeneration and subchondral bone sclerosis. Chondroitin sulfate and glucosamine are commonly used products for the symptomatic treatment of osteoarthritis. The aim of the present study was to investigate the effects of these products when used as structure-modifying drugs on the progression of osteoarthritis in the rabbit temporomandibular joint. Thirty-six New Zealand rabbits were divided into 3 groups (n = 12/group): control (no disease); osteoarthritis (disease induction); and treatment (disease induction and administration of chondroitin sulfate and glucosamine). Osteoarthritis was induced by intra-articular injection of monosodium iodoacetate. Animals were killed at 30 and 90 days after initiation of therapy. The treatment was effective in reducing disease severity, with late effects and changes in the concentration of glycosaminoglycans in the articular disc. The results indicate that chondroitin sulfate and glucosamine may have a structure-modifying effect on the tissues of rabbit temporomandibular joints altered by osteoarthritis.

Effects of dynamic radial tensile stress on fibrocartilage differentiation of bone marrow mesenchymal stem cells

BACKGROUND

Uniaxial/biaxial tensile stress has been employed to induce chondrocyte differentiation of mesenchymal stem cells. However, the effects of radial tensile stimuli on differentiation of MSCs into fibrocartilage remain unclear.

RESULTS

It was found that induced bone marrow mesenchymal stem cells (BMSCs) were not only similar to TMJ disc cells in morphology, but also could synthesize type I collagen (Col I), a small amount of type II collagen (Col II) and glycosaminoglycans (GAGs). The synthesis of Col I significantly increased while that of Col II gradually decreased with increasing tensile strength. The ratio of Col I to Col II was 1.8 to 1 and 2 to 1 in the 10% and 15% stretching groups, respectively. The gene expression of Col I and GAGs was significantly upregulated, whereas that of Col II was downregulated. However, the higher tensile stimulation (15%) promoted the synthesis of α-smooth muscle actin (α-SMA). Too much α-SMA is not conducive to constructing engineered tissue.

CONCLUSION

Therefore, the 10% radial tensile stimulus was the optimal strength for inducing the BMSCs to differentiate into fibrochondrocytes of the temporomandibular joint (TMJ) disc. This work provided a novel approach for inducing BMSCs to differentiate into fibrochondrocytes.

Photobiostimulation activity of different low-level laser dosage on masticatory muscles and temporomandibular joint in an induced arthritis rat model

This study aimed to investigate the anti-inflammatory effects of different dosage of low-level laser therapy (LLLT) in an experimental model of temporomandibular joint (TMJ) arthritis. One hundred male Wistar rats were used and divided into the following groups: CG, control group; AG, animals group with left TMJ arthritis induced by intra-articular injection of Complete Freund's adjuvant - CFA; LG5, LG10 and LG20 - animals with arthritis and treated with LLLT at doses 5, 10, and 20 J/cm², respectively. Morphological analysis was performed by TMJ histological sections stained with hematoxylin-eosin (HE), picrosirius (PSR), and toluidine blue (TB), as well as histomorphometric evaluation of cartilage, articular disc, and masticatory muscles. The amount of feed consumed within 3 weeks was evaluated, and biochemical analysis of TMJ tissues included measurement of sulfated glycosaminoglycans (GAGs), matrix metalloproteinases (MMPs) 2 and 9 zymography, and ELISA for cytokines IL-6, TNF-α, and IL-1β. Only the 20 J/cm² dose promoted higher feed intake compared to AG. On the other hand, all LLLT doses promoted better organization of articular disc collagen fibers, greater number of proteoglycans in articular cartilage, increased area and diameter of left lateral pterygoid fibers, reduced latent and active MMP 9 and 2 activity, and lower IL-1β concentration compared to AG. Considering the study limitations, it was observed that LLLT treatments were effective in protecting and tissue cleansing joint structures, accelerating tissue repair, especially at lower doses.

Tissue engineering toward temporomandibular joint disc regeneration

Treatments for temporomandibular joint (TMJ) disc thinning and perforation, conditions prevalent in TMJ pathologies, are palliative but not reparative. To address this, scaffold-free tissue-engineered implants were created using allogeneic, passaged costal chondrocytes. A combination of compressive and bioactive stimulation regimens produced implants with mechanical properties akin to those of the native disc. Efficacy in repairing disc thinning was examined in minipigs. Compared to empty controls, treatment with tissue-engineered implants restored disc integrity by inducing 4.4 times more complete defect closure, formed 3.4-fold stiffer repair tissue, and promoted 3.2-fold stiffer intralaminar fusion. The osteoarthritis score (indicative of degenerative changes) of the untreated group was 3.0-fold of the implant-treated group. This tissue engineering strategy paves the way for developing tissue-engineered implants as clinical treatments for TMJ disc thinning.

Stress shielding FE analysis on the temporomandibular joint

Aims

The purpose of this study is to develop a FE model of the temporomandibular joint (TMJ) to investigate a musculoskeletal System of forces able to taking into account the effect of all the muscles on the TMJ in terms of stress evaluated on the bone.

Methods

A 3-dimensional finite element model of the mandible was constructed from the images generated by cone-beam computed tomography of a patient undergoing fixed orthodontic treatment. In order to define the loading force system an exustive study was developed to investigated the entity of the Lateral pterygoid, Masseter, medial pterygoid, Temporalis, and Geniohoid digastric, muscles.

Results

Stresses in the TMJ components (disc, mandible condyle and the fossa eminence on the skull) were obtained. The results have shown stress distribution during normal occlusion.

Conclusion

An appreciation of the anatomical and mechanical features associated with the TMJ can serve as a foundation for understanding a patient's clinical presentation. Performance of a thorough patient history and clinical examination can guide the clinician toward an improved diagnostic process.

Viscoelastic properties of the central region of porcine temporomandibular joint disc in shear stress-relaxation

In this study, shear relaxation properties of the porcine temporomandibular joint (TMJ) disc are investigated. Previous studies have shown that, in fatigue failure and damage of cartilage and fibrocartilage, shear loads could be one of the biggest contributors to the failure. The aim of the present study is to develop an evaluation method to study shear properties of the disc and to do a mathematical characterization of it. For the experiments, twelve porcine discs were used. Each disc was dissected from the TMJ and, then, static strain control tests were carried out to obtain the shear relaxation modulus for the central region of the discs. From the results, it was found that the disc presents a viscoelastic behavior under shear loads. Relaxation modulus decreased with time. Shear relaxation was 10% of the instantaneous stress, which implies that the viscous properties of the disc cannot be neglected. The present results lead to a better understanding of the discs mechanical behavior under realistic TMJ working conditions.

Effect of dose and release rate of CTGF and TGFβ3 on avascular meniscus healing

Meniscus tears in the avascular region rarely functionally heal due to poor intrinsic healing capacity, frequently resulting in tear propagation, followed by meniscus deterioration. Recently, we have reported that time-controlled application of connective tissue growth factor (CTGF) and transforming tissue growth factor β3 (TGFβ3) significantly improved healing of avascular meniscus tears by inducing recruitment and step-wise fibrocartilaginous differentiation of mesenchymal stem/progenitor cells (MSCs). In this study, we investigated effects of the dose of CTGF and the release rate of TGFβ3 on avascular meniscus healing in our existing explant model. Our hypothesis was that dose and release rate of CTGF and TGFβ3 are contributing factors for functional outcome in avascular meniscus healing by stem cell recruitment. Low (100 ng/ml) and high (1,000 ng/ml) doses of CTGF as well as fast (0.46 ± 0.2 ng/day) and slow (0.29 ± 0.1 ng/day) release rates of TGFβ3 were applied to our established meniscus explant model for meniscus tears in the inner-third avascular region. The release rate of TGFβ3 was controlled by varying compositions of poly(lactic-co-glycolic acids) (PLGA) microspheres. The meniscus explants were then cultured for 8 weeks on top of mesenchymal stem/progenitor cells (MSCs). Among the tested combinations, we found that a high CTGF dose and slow TGFβ3 release are most effective for integrated healing of avascular meniscus, demonstrating improvements in alignment of collagen fibers, fibrocartilaginous matrix elaboration and mechanical properties. This study may represent an important step toward the development of a regenerative therapy to improve healing of avascular meniscus tears by stem cell recruitment. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:1555-1562, 2019.

Effect of Sustained Joint Loading on TMJ Disc Nutrient Environment

The temporomandibular joint (TMJ) disc nutrient environment profoundly affects cell energy metabolism, proliferation, and biosynthesis. Due to technical challenges of in vivo measurements, the human TMJ disc extracellular nutrient environment under load, which depends on metabolic rates, solute diffusion, and disc morphometry, remains unknown. Therefore, the study objective was to predict the TMJ disc nutrient environment under loading conditions using combined experimental and computational modeling approaches. Specifically, glucose consumption and lactate production rates of porcine TMJ discs were measured under varying tissue culture conditions (n = 40 discs), and mechanical strain-dependent glucose and lactate diffusivities were measured using a custom diffusion chamber (n = 6 discs). TMJ anatomy and loading area were obtained from magnetic resonance imaging of healthy human volunteers (n = 11, male, 30 ± 9 y). Using experimentally determined nutrient metabolic rates, solute diffusivities, TMJ anatomy, and loading areas, subject-specific finite element (FE) models were developed to predict the 3-dimensional nutrient profiles in unloaded and loaded TMJ discs (unloaded, 0% strain, 20% strain). From the FE models, glucose, lactate, and oxygen concentration ranges for unloaded healthy human TMJ discs were 0.6 to 4.0 mM, 0.9 to 5.0 mM, and 0% to 6%, respectively, with steep gradients in the anterior and posterior bands. Sustained mechanical loading significantly reduced nutrient levels (P < 0.001), with a critical zone in which cells may die representing approximately 13.5% of the total disc volume. In conclusion, this study experimentally determined TMJ disc metabolic rates, solute diffusivities, and disc morphometry, and through subject-specific FE modeling, revealed critical interactions between mechanical loading and nutrient supply and metabolism for the in vivo human TMJ disc. The results suggest that TMJ disc homeostasis may be vulnerable to pathological loading (e.g., clenching, bruxism), which impedes nutrient supply. Given difficulties associated with direct in vivo measurements, this study provides a new approach to systematically investigate homeostatic and degenerative mechanisms associated with the TMJ disc.

A porous fibrous hyperelastic damage model for human periodontal ligament: Application of a microcomputerized tomography finite element model

The periodontal ligament (PDL) is a soft biological tissue that connects the tooth with the trabecular bone of the mandible. It plays a key role in load transmission and is primarily responsible for bone resorption and most common periodontal diseases. Although several numerical studies have analysed the biomechanical response of the PDL, most did not consider its porous fibrous structure, and only a few analysed damage to the PDL. This study presents an innovative numerical formulation of a porous fibrous hyperelastic damage material model for the PDL. The model considers two separate softening phenomena: fibre alignment during loading and fibre rupture. The parameters for the material model characterization were fitted using experimental data from the literature. Furthermore, the experimental tests used for characterization were computationally modelled to verify the material parameters. A finite element model of a portion of a human mandible, obtained by microcomputerized tomography, was developed, and the proposed constitutive model was implemented for the PDL. Our results confirm that damage to the PDL may occur mainly because of overpressure of the interstitial fluid, while large forces must be applied to damage the PDL fibrous network. Moreover, this study clarifies some aspects of the relationship between PDL damage and the bone remodelling process.

Remaining Hurdles for Tissue-Engineering the Temporomandibular Joint Disc

The temporomandibular joint (TMJ) disc, a fibrocartilaginous structure between the mandible and temporal bone, is implicated in temporomandibular disorders (TMDs). TMDs symptomatically affect approximately 25% of the population, of which 70% have internal derangement of the disc. Treatments lack efficiency, motivating novel therapies, including tissue-engineering toward TMJ disc regeneration. Recent developments in scaffold-based or scaffold-free approaches, cell sources, and biochemical and mechanical stimulation have resulted in constructs exhibiting native tissue mechanics. Safety and efficacy of tissue-engineered implants have shown promising results in orthotopic animal studies. However, many hurdles need to be overcome in tissue-engineering approaches, and clinical and regulatory pathways. Future studies present an opportunity for clinicians and researchers to work together toward safe and effective clinical trials.

Stribeck Curve Analysis of Temporomandibular Joint Condylar Cartilage and Disc

Temporomandibular joint (TMJ) diseases such as osteoarthritis and disc displacement have no permanent treatment options, but lubrication therapies, used in other joints, could be an effective alternative. However, the healthy TMJ contains fibrocartilage, not hyaline cartilage as is found in other joints. As such, the effect of lubrication therapies in the TMJ is unknown. Additionally, only a few studies have characterized the friction coefficient of the healthy TMJ. Like other cartilaginous tissues, the TMJ condyles and discs are subject to changes in friction coefficient due to fluid pressurization. In addition, the friction coefficient of the TMJ is affected by the sliding direction and anatomic location. However, these previous findings have not been able to identify how all 3 of these parameters (anatomic location, sliding direction, and fluid pressurization) influence changes in friction coefficient. This study used Stribeck curves to identify differences in the friction coefficients of TMJ condyles and discs based on anatomic location, sliding direction, and amount of fluid pressurization (friction mode). Friction coefficients were measured using a cartilage on glass tribometer. Both TMJ condyle and disc friction coefficients were well described by Stribeck curves. These curves changed based on anatomic location, but very few differences in friction coefficients were observed based on sliding direction. TMJ condyles had similar boundary mode and elastoviscous mode friction coefficients to the TMJ disc, and both were lower than hyaline cartilage in other joints. The observed differences here indicate that the surface characteristics of each anatomic region cause differences in friction coefficients.

Considerations for translation of tissue engineered fibrocartilage from bench to bedside

Fibrocartilage is found in the knee meniscus, the temporomandibular joint (TMJ) disc, the pubic symphysis, the annulus fibrosus of intervertebral disc, tendons, and ligaments. These tissues are notoriously difficult to repair due to their avascularity, and limited clinical repair and replacement options exist. Tissue engineering has been proposed as a route to repair and replace fibrocartilages. Using the knee meniscus and TMJ disc as examples, this review describes how fibrocartilages can be engineered toward translation to clinical use. Presented are fibrocartilage anatomy, function, epidemiology, pathology, and current clinical treatments because they inform design criteria for tissue engineered fibrocartilages. Methods for how native tissues are characterized histomorphologically, biochemically, and mechanically to set gold standards are described. Then, provided is a review of fibrocartilage-specific tissue engineering strategies, including the selection of cell sources, scaffold or scaffold-free methods, and biochemical and mechanical stimuli. In closing, the Food and Drug Administration paradigm is discussed to inform researchers of both the guidance that exists and the questions that remain to be answered with regard to bringing a tissue engineered fibrocartilage product to the clinic.

Functional anatomy of the equine temporomandibular joint: Histological characteristics of the articular surfaces and underlining tissues

It has been assumed that dental conditions cause disorders of the equine temporomandibular joint (TMJ), due to biomechanical overload or aberrant loading. However, the incidence of published TMJ disorders in horses is low and this leads to the question whether the equine TMJ is adapted well to its biomechanical requirements or is able to remodel its articular surfaces in response to modified loading conditions. The aim of this study was to determine the histological characteristics of healthy equine TMJs. The tissue components of the articular surfaces of 10 TMJs obtained from horses without any clinical history of dental or TMJ disorders were analysed. Apart from the mandibular fossa of the temporal bone, the osseous aspects of the TMJ exhibited a uniform zoning pattern. The articular surfaces were composed of three tissue layers: (1) a superficial cell-rich dense connective tissue layer; (2) a middle fibrocartilage layer; and (3) a deep hyaline-like cartilage layer. The articular disc was composed of an inner core of fibrocartilage and hyaline-like cartilage meshwork covered with both cell-rich dense connective tissue and fibrocartilage at its dorsal and ventral aspects. In contrast, the mandibular fossa was only covered by a dense connective tissue, frequently supplemented by a synovial membrane, suggesting low biomechanical stress. Glycosaminoglycans, which are indicative of compressive loads, were predominantly present within the rostral part of the articular tubercle and the retroarticular process, the dorsal part of articular disc and the entire mandibular head, but were absent within the mandibular fossa. The results of this study suggest the presence of different biomechanical demands in the dorsal and ventral compartment of the equine TMJ.

Fibro/chondrogenic differentiation of dental stem cells into chitosan/alginate scaffolds towards temporomandibular joint disc regeneration

Tissue engineering (TE) may provide effective alternative treatment for challenging temporomandibular joint (TMJ) pathologies associated with disc malpositioning or degeneration and leading to severe masticatory dysfunction. Aim of this study was to evaluate the potential of chitosan/alginate (Ch/Alg) scaffolds to promote fibro/chondrogenic differentiation of dental pulp stem cells (DPSCs) and production of fibrocartilage tissue, serving as a replacement of the natural TMJ disc. Ch/Alg scaffolds were fabricated by crosslinking with CaCl2 combined or not with glutaraldehyde, resulting in two scaffold types that were physicochemically characterized, seeded with DPSCs or human nucleus pulposus cells (hNPCs) used as control and evaluated for cell attachment, viability, and proliferation. The DPSCs/scaffold constructs were incubated for up to 8 weeks and assessed for extracellular matrix production by means of histology, immunofluorescence, and thermomechanical analysis. Both Ch/Alg scaffold types with a mass ratio of 1:1 presented a gel-like structure with interconnected pores. Scaffolds supported cell adhesion and long-term viability/proliferation of DPSCs and hNPCs. DPSCs cultured into Ch/Alg scaffolds demonstrated a significant increase of gene expression of fibrocartilaginous markers (COLI, COL X, SOX9, COM, ACAN) after up to 3 weeks in culture. Dynamic thermomechanical analysis revealed that scaffolds loaded with DPSCs significantly increased storage modulus and elastic response compared to cell-free scaffolds, obtaining values similar to those of native TMJ disc. Histological data and immunochemical staining for aggrecan after 4 to 8 weeks indicated that the scaffolds support abundant fibrocartilaginous tissue formation, thus providing a promising strategy for TMJ disc TE-based replacement.

The Temporomandibular Joint of the Domestic Dog (Canis lupus familiaris) in Health and Disease

This study aimed to characterize the histological, biomechanical and biochemical properties of the temporomandibular joint (TMJ) of the domestic dog in health and disease. In addition, we sought to identify structure-function relationships and to characterize TMJ degenerative lesions that may be found naturally in this species. TMJs (n = 20) from fresh cadaver heads (n = 10) of domestic dogs were examined macroscopically and microscopically and by cone-beam computed tomography. The TMJ discs were evaluated for their mechanical and biochemical properties. If TMJ arthritic changes were found, pathological characteristics were described and compared with healthy joints. Five (50%) dogs demonstrated macroscopically normal fibrocartilaginous articular surfaces and fibrous discs and five (50%) dogs exhibited degenerative changes that were observed either in the articular surfaces or the discs. In the articulating surfaces, these changes included erosions, conformational changes and osteophytes. In the discs, degenerative changes were represented by full-thickness perforations. Histologically, pathological specimens demonstrated fibrillations with or without erosions, subchondral bone defects and subchondral bone sclerosis. Significant anisotropy in the TMJ discs was evident on histology and tensile mechanical testing. Specifically, the discs were significantly stiffer and stronger in the rostrocaudal direction compared with the mediolateral direction. No significant differences were detected in compressive properties of different disc regions. Biochemical analyses showed high collagen content and low glycosaminoglycan (GAG) content. No significant differences in biochemical composition, apart from GAG, were detected among the disc regions. GAG concentration was significantly higher in the central region as compared with the caudal (posterior) region. The TMJ of the domestic dog exhibits similarities, but also differences, compared with other mammals with regards to structure-function relationships. The TMJ articular surfaces and the disc exhibit degenerative changes as seen in other species, including perforation of the disc as seen in man. The degenerative changes had greater effects on the mechanical properties compared with the biochemical properties of the TMJ components. Translational motion of the TMJ does occur in dogs, but is limited.

Preclinical Animal Models for Temporomandibular Joint Tissue Engineering

There is a paucity of in vivo studies that investigate the safety and efficacy of temporomandibular joint (TMJ) tissue regeneration approaches, in part due to the lack of established animal models. Review of disease models for study of TMJ is presented herein with an attempt to identify relevant preclinical animal models for TMJ tissue engineering, with emphasis on the disc and condyle. Although degenerative joint disease models have been mainly performed on mice, rats, and rabbits, preclinical regeneration approaches must employ larger animal species. There remains controversy regarding the preferred choice of larger animal models between the farm pig, minipig, goat, sheep, and dog. The advantages of the pig and minipig include their well characterized anatomy, physiology, and tissue properties. The advantages of the sheep and goat are their easier surgical access, low cost per animal, and its high tissue availability. The advantage of the dog is that the joint space is confined, so migration of interpositional devices should be less likely. However, each species has limitations as well. For example, the farm pig has continuous growth until about 18 months of age, and difficult surgical access due to the zygomatic arch covering the lateral aspect of joint. The minipig is not widely available and somewhat costly. The sheep and the goat are herbivores, and their TMJs mainly function in translation. The dog is a carnivore, and the TMJ is a hinge joint that can only rotate. Although no species provides the gold standard for all preclinical TMJ tissue engineering approaches, the goat and sheep have emerged as the leading options, with the minipig as the choice when cost is less of a limitation; and with the dog and farm pig serving as acceptable alternatives. Finally, naturally occurring TMJ disorders in domestic species may be harnessed on a preclinical trial basis as a clinically relevant platform for translation.

Engineered Healing of Avascular Meniscus Tears by Stem Cell Recruitment

Meniscus injuries are extremely common with approximately one million patients undergoing surgical treatment annually in the U.S. alone. Upon injury, the outer zone of the meniscus can be repaired and expected to functionally heal but tears in the inner avascular region are unlikely to heal. To date, no regenerative therapy has been proven successful for consistently promoting healing in inner-zone meniscus tears. Here, we show that controlled applications of connective tissue growth factor (CTGF) and transforming growth factor beta 3 (TGFβ3) can induce seamless healing of avascular meniscus tears by inducing recruitment and step-wise differentiation of synovial mesenchymal stem/progenitor cells (syMSCs). A short-term release of CTGF, a selected chemotactic and profibrogenic cue, successfully recruited syMSCs into the incision site and formed an integrated fibrous matrix. Sustain-released TGFβ3 then led to a remodeling of the intermediate fibrous matrix into fibrocartilaginous matrix, fully integrating incised meniscal tissues with improved functional properties. Our data may represent a novel clinically relevant strategy to improve healing of avascular meniscus tears by recruiting endogenous stem/progenitor cells.

Properties of the Temporomandibular Joint in Growing Pigs

A subset of temporomandibular joint (TMJ) disorders are attributed to joint degeneration. The pig has been considered the preferred in-vivo model for the evaluation of potential therapies for TMJ disorders, and practical considerations such as cost and husbandry issues have favored the use of young, skeletally immature animals. However, the effect of growth on the biochemical and biomechanical properties of the TMJ disc and articulating cartilage has not been examined. The present study investigates the effect of age on the biochemical and biomechanical properties of healthy porcine TMJs at 3, 6, and 9 months of age. DNA , hyrdroxyproline, and glycosaminoglycan (GAG) content were determined and the discs and condyles were tested in uniaxial unconfined stress relaxation compression from 10% - 30% strain. TMJ discs were further assessed with a tensile test to failure technique, which included the ability to test multiple samples from the same region of an individual disc to minimize the intra-specimen variation. No differences in biochemical properties for the disc or compressive properties at 30% stress relaxation in the disc and condylar cartilage were found. In tension, no differences were observed for peak stress and tensile modulus. The collagen content of the condyle were higher at 9 months than 3 months (p<0.05), and the GAG content was higher at 9 months than 6 months (p<0.05). There was a trend of increased compressive instantaneous modulus with age. As such, age matched controls for growing pigs are probably appropriate for most parameters measured.

Scaffold-Based Temporomandibular Joint Tissue Regeneration in Experimental Animal Models: A Systematic Review

Reconstruction of degenerated temporomandibular joint (TMJ) structures remains a clinical challenge. Tissue engineering (TE) is a promising alternative to current treatment options, where the TMJ is either left without functional components, or replaced with autogenous, allogeneic, or synthetic grafts. The objective of this systematic review was to answer the focused question: in experimental animal models, does the implantation of biomaterial scaffolds loaded with cells and/or growth factors (GFs) enhance regeneration of the discal or osteochondral TMJ tissues, compared with scaffolds alone, without cells, or GFs? Following PRISMA (Preferred Reporting Items for Systematic reviews and Meta-Analysis) guidelines, electronic databases were searched for relevant controlled preclinical in vivo studies. Thirty studies reporting TMJ TE strategies in both small (rodents, rabbits; n = 25) and large animals (dogs, sheep, goats; n = 5) reporting histological and/or radiographic outcomes were included. Twelve studies reported ectopic (subcutaneous) implantation models in rodents, whereas 18 studies reported orthotopic, surgically induced defect models in large animals. On average, studies presented with an unclear-to-high risk of bias. In most studies, mesenchymal stem cells or chondrocytes were used in combination with either natural or synthetic polymer scaffolds, aiming for either TMJ disc or condyle regeneration. In summary, the overall preclinical evidence (ectopic [n = 6] and orthotopic TMJ models [n = 6]) indicate that addition of chondrogenic and/or osteogenic cells to biomaterial scaffolds enhances the potential for TMJ tissue regeneration. Standardization of animal models and quantitative outcome evaluations (biomechanical, biochemical, histomorphometric, and radiographic) in future studies, would allow more reliable comparisons and increase the validity of the results.

Temporomandibular Joint Regenerative Medicine

The temporomandibular joint (TMJ) is an articulation formed between the temporal bone and the mandibular condyle which is commonly affected. These affections are often so painful during fundamental oral activities that patients have lower quality of life. Limitations of therapeutics for severe TMJ diseases have led to increased interest in regenerative strategies combining stem cells, implantable scaffolds and well-targeting bioactive molecules. To succeed in functional and structural regeneration of TMJ is very challenging. Innovative strategies and biomaterials are absolutely crucial because TMJ can be considered as one of the most difficult tissues to regenerate due to its limited healing capacity, its unique histological and structural properties and the necessity for long-term prevention of its ossified or fibrous adhesions. The ideal approach for TMJ regeneration is a unique scaffold functionalized with an osteochondral molecular gradient containing a single stem cell population able to undergo osteogenic and chondrogenic differentiation such as BMSCs, ADSCs or DPSCs. The key for this complex regeneration is the functionalization with active molecules such as IGF-1, TGF-β1 or bFGF. This regeneration can be optimized by nano/micro-assisted functionalization and by spatiotemporal drug delivery systems orchestrating the 3D formation of TMJ tissues.

Regionally variant collagen alignment correlates with viscoelastic properties of the disc of the human temporomandibular joint

OBJECTIVE

To determine the regionally variant quality of collagen alignment in human TMJ discs and its statistical correlation with viscoelastic properties.

DESIGN

For quantitative analysis of the quality of collagen alignment, horizontal sections of human TMJ discs with Pricrosirius Red staining were imaged under circularly polarized microscopy. Mean angle and angular deviation of collagen fibers in each region were analyzed using a well-established automated image-processing for angular gradient. Instantaneous and relaxation moduli of each disc region were measured under stress-relaxation test both in tensile and compression. Then Spearman correlation analysis was performed between the angular deviation and the moduli. To understand the effect of glycosaminoglycans on the correlation, TMJ disc samples were treated by chondroitinase ABC (C-ABC).

RESULTS

Our imaging processing analysis showed the region-variant direction of collagen alignment, consistently with previous findings. Interestingly, the quality of collagen alignment, not only the directions, was significantly different in between the regions. The angular deviation of fiber alignment in the anterior and intermediate regions were significantly smaller than the posterior region. Medial and lateral regions showed significantly bigger angular deviation than all the other regions. The regionally variant angular deviation values showed statistically significant correlation with the tensile instantaneous modulus and the relaxation modulus, partially dependent on C-ABC treatment.

CONCLUSION

Our findings suggest the region-variant degree of collagen fiber alignment is likely attributed to the heterogeneous viscoelastic properties of TMJ disc that may have significant implications in development of regenerative therapy for TMJ disc.

Rise of the Pigs: Utilization of the Porcine Model to Study Musculoskeletal Biomechanics and Tissue Engineering During Skeletal Growth

Large animal models play an essential role in the study of tissue engineering and regenerative medicine (TERM), as well as biomechanics. The porcine model has been increasingly used to study the musculoskeletal system, including specific joints, such as the knee and temporomandibular joints, and tissues, such as bone, cartilage, and ligaments. In particular, pigs have been utilized to evaluate the role of skeletal growth on the biomechanics and engineered replacements of these joints and tissues. In this review, we explore the publication history of the use of pig models in biomechanics and TERM discuss interspecies comparative studies, highlight studies on the effect of skeletal growth and other biological considerations in the porcine model, and present challenges and emerging opportunities for using this model to study functional TERM.

A review of in-vitro fibrocartilage tissue engineered therapies with a focus on the temporomandibular joint

The inability of fibrocartilage, specifically the temporomandibular joint (TMJ) disc, to regenerate and remodel following injury presents a unique problem for clinicians. Tissue engineering then offers a potential regenerative therapy. In vitro testing provides a valuable screening tool for potential tissue engineered solutions. The conclusions drawn for TMJ in vitro research were compared against state of the art fibrocartilage studies in the knee meniscus, and annulus fibrosus of the intervertebral disc (IVD). For TMJ disc regeneration, in vitro tissue engineered approaches, focused on cellular therapies with fibrochondrocytes, have displayed an inability to produce enough collagen, as well as an inability to recapitulate native mechanical properties. Biomaterial approaches have recapitulated the native properties of the TMJ disc, but their in vivo efficacy has yet to be determined. By comparison, the knee meniscus field is the most progressive in the use of stem cells as a cell source. The knee meniscus field has moved away from measuring mechanical properties, and are instead more focused on biochemistry and gene expression. IVD studies mainly use electrospun scaffolds, and have produced the best success in mechanical properties. The TMJ field, in comparison to knee meniscus and IVD, needs to employ stem cell therapies, new biomaterials and manufacturing techniques, and cutting edge molecular assays, in future in vitro approaches to screen for viable technologies to move to in vivo studies.

The Yucatan Minipig Temporomandibular Joint Disc Structure-Function Relationships Support Its Suitability for Human Comparative Studies

Frequent involvement of the disc in temporomandibular joint (TMJ) disorders warrants attempts to tissue engineer TMJ disc replacements. Physiologically, a great degree of similarity is seen between humans and farm pigs (FPs), but the pig's rapid growth confers a significant challenge for in vivo experiments. Minipigs have a slower growth rate and are smaller than FPs, but minipig TMJ discs have yet to be fully characterized. The objective of this study was to determine the suitability of the minipig for TMJ studies by extensive structural and functional characterization. The properties of minipig TMJ discs closely reproduced previously reported morphological, biochemical, and biomechanical values of human and FP discs. The width/length dimension ratio of the minipig TMJ disc was 1.95 (1.69 for human and 1.94 for FP). The biochemical evaluation revealed, on average per wet weight, 24.3% collagen (22.8% for human and 24.9% for FP); 0.8% glycosaminoglycan (GAG; 0.5% for human and 0.4% for FP); and 0.03% DNA (0.008% for human and 0.02% for FP). Biomechanical testing revealed, on average, compressive relaxation modulus of 50 kPa (37 kPa for human and 32 kPa for FP), compressive instantaneous modulus of 1121 kPa (1315 kPa for human and 1134 kPa for FP), and coefficient of viscosity of 13 MPa·s (9 MPa·s for human and 3 MPa·s for FP) at 20% strain. These properties also varied topographically in accordance to those of human and FP TMJ discs. Anisotropy, quantified by bidirectional tensile testing and histology, again was analogous among minipig, human, and FP TMJ discs. The minipig TMJ's ginglymoarthrodial nature was verified through cone beam computer tomography. Collectively, the similarities between minipig and human TMJ discs support the use of minipig as a relevant model for TMJ research; considering the practical advantages conferred by its growth rate and size, the minipig may be a preferred model over FP.

Structure-Function Relationships of Temporomandibular Retrodiscal Tissue

It is estimated that 2% to 4% of the US population will seek treatment for temporomandibular joint (TMJ) symptoms, typically occurring with anterior disc displacement. The temporomandibular retrodiscal tissue (RDT) has been postulated to restrict pathologic disc displacement. To elucidate RDT function, understanding regional RDT biomechanics and ultrastructure is required. No prior biomechanical analysis has determined regional variations in RDT properties or associated biomechanical outcomes with regional variations in collagen and elastin organization. The purpose of this study was to determine direction- and region-dependent tensile biomechanical characteristics and regional fibrillar arrangement of porcine RDT. Incremental stress relaxation experiments were performed on 20 porcine RDT specimens, with strain increments from 5% to 50%, a ramp-strain rate of 2% per second, and relaxation periods of 2.5 min. Tensile characteristics were determined between temporal and condylar regions and anteroposterior and mediolateral directions. RDT preparations were imaged using second-harmonic generation (SHG) microscopy for both collagen and elastin. Young's modulus showed significant differences by region ( P < 0.001) and strain ( P < 0.001). Young's modulus was <1 MPa from 5% to 20% strain, before increasing from 20% to 50% strain to a maximum of 2.9 MPa. Young's modulus trended higher in the temporal region and mediolateral direction. Instantaneous and relaxed moduli showed no significant difference by region or direction. Collagen arrangement was most organized near the disc boundary, with disorganization increasing posteriorly. Elastin was present at the disc boundary and RDT mid-body. Porcine RDT demonstrated region- and strain-dependent variations in tensile moduli, associated with regional differences in collagen and elastin. The small tensile moduli suggest that the RDT is not resistive to pathologic disc displacement. Further biomechanical analysis of the RDT is required to fully define RDT functional roles. Understanding regional variations in tissue stiffness and ultrastructure for TMJ components is critical to understanding joint function and for the long-term goal of improving TMJ disorder treatment strategies.