Cell differentiation and matrix organization in engineered teeth

Mesenchymal condensation in tooth development and regeneration: a focus on translational aspects of organogenesis

The teeth are vertebrate-specific, highly specialized organs performing fundamental functions of mastication and speech, the maintenance of which is crucial for orofacial homeostasis and is further linked to systemic health and human psychosocial well-being. However, with limited ability for self-repair, the teeth can often be impaired by traumatic, inflammatory, and progressive insults, leading to high prevalence of tooth loss and defects worldwide. Regenerative medicine holds the promise to achieve physiological restoration of lost or damaged organs, and in particular an evolving framework of developmental engineering has pioneered functional tooth regeneration by harnessing the odontogenic program. As a key event of tooth morphogenesis, mesenchymal condensation dictates dental tissue formation and patterning through cellular self-organization and signaling interaction with the epithelium, which provides a representative to decipher organogenetic mechanisms and can be leveraged for regenerative purposes. In this review, we summarize how mesenchymal condensation spatiotemporally assembles from dental stem cells (DSCs) and sequentially mediates tooth development. We highlight condensation-mimetic engineering efforts and mechanisms based on ex vivo aggregation of DSCs, which have achieved functionally robust and physiologically relevant tooth regeneration after implantation in animals and in humans. The discussion of this aspect will add to the knowledge of development-inspired tissue engineering strategies and will offer benefits to propel clinical organ regeneration.

The Emerging Role of Stem Cells in Regenerative Dentistry

Progress of modern dentistry is accelerating at a spectacular speed in the scientific, technological and clinical areas. Practical examples are the advancement in the digital field, which has guaranteed an average level of prosthetic practices for all patients, as well as other scientific developments, including research on stem cell biology. Given their plasticity, defined as the ability to differentiate into specific cell lineages with a capacity of almost unlimited self-renewal and release of trophic/immunomodulatory factors, stem cells have gained significant scientific and commercial interest in the last 15 years. Stem cells that can be isolated from various tissues of the oral cavity have emerged as attractive sources for bone and dental regeneration, mainly due to their ease of accessibility. This review will present the current understanding of emerging conceptual and technological issues of the use of stem cells to treat bone and dental loss defects. In particular, we will focus on the clinical application of stem cells, either directly isolated from oral sources or in vitro reprogrammed from somatic cells (induced pluripotent stem cells). Research aimed at further unraveling stem cell plasticity will allow to identify optimal stem cell sources and characteristics, to develop novel regenerative tools in dentistry.

Hard Dental Tissues Regeneration-Approaches and Challenges

With the development of the modern concept of tissue engineering approach and the discovery of the potential of stem cells in dentistry, the regeneration of hard dental tissues has become a reality and a priority of modern dentistry. The present review reports the recent advances on stem-cell based regeneration strategies for hard dental tissues and analyze the feasibility of stem cells and of growth factors in scaffolds-based or scaffold-free approaches in inducing the regeneration of either the whole tooth or only of its component structures.

Semaphorin 3A receptor inhibitor as a novel therapeutic to promote innervation of bioengineered teeth

The sensory innervation of the dental pulp is essential for tooth function and protection. It is mediated by axons originating from the trigeminal ganglia and is spatio-temporally regulated. We have previously shown that the innervation of bioengineered teeth can be achieved only under immunosuppressive conditions. The aim of this study was to develop a model to determine the role of Semaphorin 3A (Sema3A) in the innervation of bioengineered teeth. We first analysed innervation of the dental pulp of mandibular first molars in newborn (postnatal day 0: PN0) mice deficient for Sema3A (Sema3A^-/- ), a strong inhibitor of axon growth. While at PN0, axons detected by immunostaining for peripherin and NF200 were restricted to the peridental mesenchyme in Sema3A^+/+ mice, they entered the dental pulp in Sema3A^-/- mice. Then, we have implanted cultured teeth obtained from embryonic day-14 (E14) molar germs of Sema3A^-/- mice together with trigeminal ganglia. The dental pulps of E14 cultured and implanted Sema3A^-/- teeth were innervated, whereas the axons did not enter the pulp of E14 Sema3A^+/+ cultured and implanted teeth. A "Membrane Targeting Peptide NRP1," suppressing the inhibitory effect of Sema3A, has been previously identified. The injection of this peptide at the site of implantation allowed the innervation of the dental pulp of bioengineered teeth obtained from E14 dental dissociated mesenchymal and epithelial cells reassociations of ICR mice. In conclusion, these data show that inhibition of only one axon repellent molecule, Sema3A, allows for pulp innervation of bioengineered teeth.

Promoting bioengineered tooth innervation using nanostructured and hybrid scaffolds

The innervation of teeth mediated by axons originating from the trigeminal ganglia is essential for their function and protection. Immunosuppressive therapy using Cyclosporine A (CsA) was found to accelerate the innervation of transplanted tissues and particularly that of bioengineered teeth. To avoid the CsA side effects, we report in this study the preparation of CsA loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles, their embedding on polycaprolactone (PCL)-based scaffolds and their possible use as templates for the innervation of bioengineered teeth. This PCL scaffold, approved by the FDA and capable of mimicking the extracellular matrix, was obtained by electrospinning and decorated with CsA-loaded PLGA nanoparticles to allow a local sustained action of this immunosuppressive drug. Dental re-associations were co-implanted with a trigeminal ganglion on functionalized scaffolds containing PLGA and PLGA/cyclosporine in adult ICR mice during 2weeks. Histological analyses showed that the designed scaffolds did not alter the teeth development after in vivo implantation. The study of the innervation of the dental re-associations by indirect immunofluorescence and transmission electron microscopy (TEM), showed that 88.4% of the regenerated teeth were innervated when using the CsA-loaded PLGA scaffold. The development of active implants thus allows their potential use in the context of dental engineering.

STATEMENT OF SIGNIFICANCE

Tooth innervation is essential for their function and protection and this can be promoted in vivo using polymeric scaffolds functionalized with immunosuppressive drug-loaded nanoparticles. Immunosuppressive therapy using biodegradable nanoparticles loaded with Cyclosporine A was found to accelerate the innervation of bioengineered teeth after two weeks of implantation.

Functionalized scaffolds to control dental pulp stem cell fate

Emerging understanding about interactions between stem cells, scaffolds, and morphogenic factors has accelerated translational research in the field of dental pulp tissue engineering. Dental pulp stem cells constitute a subpopulation of cells endowed with self-renewal and multipotency. Dental pulp stem cells seeded in biodegradable scaffolds and exposed to dentin-derived morphogenic factors give rise to a pulplike tissue capable of generating new dentin. Notably, dentin-derived proteins are sufficient to induce dental pulp stem cell differentiation into odontoblasts. Ongoing work is focused on developing ways of mobilizing dentin-derived proteins and disinfecting the root canal of necrotic teeth without compromising the morphogenic potential of these signaling molecules. On the other hand, dentin by itself does not appear to be capable of inducing endothelial differentiation of dental pulp stem cells despite the well-known presence of angiogenic factors in dentin. This is particularly relevant in the context of dental pulp tissue engineering in full root canals in which access to blood supply is limited to the apical foramina. To address this challenge, scientists are looking at ways to use the scaffold as a controlled-release device for angiogenic factors. The aim of this article was to present and discuss current strategies to functionalize injectable scaffolds and customize them for dental pulp tissue engineering. The long-term goal of this work is to develop stem cell-based therapies that enable the engineering of functional dental pulps capable of generating new tubular dentin in humans.

Tooth Organ Bioengineering: Cell Sources and Innovative Approaches

Various treatment approaches for restoring missing teeth are being utilized nowadays by using artificial dental crowns/bridges or the use of dental implants. All aforementioned restorative modalities are considered to be the conventional way of treating such cases. Although these artificial therapies are commonly used for tooth loss rehabilitation, they are still less conservative, show less biocompatibility and fail to restore the natural biological and physiological function. Adding to that, they are considered to be costly due to the risk of failure and they also require regular maintenance. Regenerative dentistry is currently considered a novel therapeutic concept with high potential for a complete recovery of the natural function and esthetics of teeth. Biological-cell based dental therapies would involve replacement of teeth by using stem cells that will ultimately grow a bioengineered tooth, thereby restoring both the biological and physiological functions of the natural tooth, and are considered to be the ultimate goal in regenerative dentistry. In this review, various stem cell-based therapeutic approaches for tooth organ bioengineering will be discussed.

OFD1 and flotillins are integral components of a ciliary signaling protein complex organized by polycystins in renal epithelia and odontoblasts

Mutation of the X-linked oral-facial-digital syndrome type 1 (OFD1) gene is embryonic lethal in males and results in craniofacial malformations and adult onset polycystic kidney disease in females. While the OFD1 protein localizes to centriolar satellites, centrosomes and basal bodies, its cellular function and how it relates to cystic kidney disease is largely unknown. Here, we demonstrate that OFD1 is assembled into a protein complex that is localized to the primary cilium and contains the epidermal growth factor receptor (EGFR) and domain organizing flotillin proteins. This protein complex, which has similarity to a basolateral adhesion domain formed during cell polarization, also contains the polycystin proteins that when mutant cause autosomal dominant polycystic kidney disease (ADPKD). Importantly, in human ADPKD cells where mutant polycystin-1 fails to localize to cilia, there is a concomitant loss of localization of polycystin-2, OFD1, EGFR and flotillin-1 to cilia. Together, these data suggest that polycystins are necessary for assembly of a novel flotillin-containing ciliary signaling complex and provide a molecular rationale for the common renal pathologies caused by OFD1 and PKD mutations.

Nanofibers implant functionalized by neural growth factor as a strategy to innervate a bioengineered tooth

Current strategies for jaw reconstruction require multiple procedures, to repair the bone defect, to offer sufficient support, and to place the tooth implant. The entire procedure can be painful and time-consuming, and the desired functional repair can be achieved only when both steps are successful. The ability to engineer combined tooth and bone constructs, which would grow in a coordinated fashion with the surrounding tissues, could potentially improve the clinical outcomes and also reduce patient suffering. A unique nanofibrous and active implant for bone-tooth unit regeneration and also the innervation of this bioengineered tooth are demonstrated. A nanofibrous polycaprolactone membrane is functionalized with neural growth factor, along with dental germ, and tooth innervation follows. Such innervation allows complete functionality and tissue homeostasis of the tooth, such as dentinal sensitivity, odontoblast function, masticatory forces, and blood flow.

Stem cell sources for tooth regeneration: current status and future prospects

Stem cells are capable of renewing themselves through cell division and have the remarkable ability to differentiate into many different types of cells. They therefore have the potential to become a central tool in regenerative medicine. During the last decade, advances in tissue engineering and stem cell-based tooth regeneration have provided realistic and attractive means of replacing lost or damaged teeth. Investigation of embryonic and adult (tissue) stem cells as potential cell sources for tooth regeneration has led to many promising results. However, technical and ethical issues have hindered the availability of these cells for clinical application. The recent discovery of induced pluripotent stem (iPS) cells has provided the possibility to revolutionize the field of regenerative medicine (dentistry) by offering the option of autologous transplantation. In this article, we review the current progress in the field of stem cell-based tooth regeneration and discuss the possibility of using iPS cells for this purpose.

Immunomodulation stimulates the innervation of engineered tooth organ

The sensory innervation of the dental mesenchyme is essential for tooth function and protection. Sensory innervation of the dental pulp is mediated by axons originating from the trigeminal ganglia and is strictly regulated in time. Teeth can develop from cultured re-associations between dissociated dental epithelial and mesenchymal cells from Embryonic Day 14 mouse molars, after implantation under the skin of adult ICR mice. In these conditions however, the innervation of the dental mesenchyme did not occur spontaneously. In order to go further with this question, complementary experimental approaches were designed. Cultured cell re-associations were implanted together with trigeminal ganglia for one or two weeks. Although axonal growth was regularly observed extending from the trigeminal ganglia to all around the forming teeth, the presence of axons in the dental mesenchyme was detected in less than 2.5% of samples after two weeks, demonstrating a specific impairment of their entering the dental mesenchyme. In clinical context, immunosuppressive therapy using cyclosporin A was found to accelerate the innervation of transplanted tissues. Indeed, when cultured cell re-associations and trigeminal ganglia were co-implanted in cyclosporin A-treated ICR mice, nerve fibers were detected in the dental pulp, even reaching odontoblasts after one week. However, cyclosporin A shows multiple effects, including direct ones on nerve growth. To test whether there may be a direct functional relationship between immunomodulation and innervation, cell re-associations and trigeminal ganglia were co-implanted in immunocompromised Nude mice. In these conditions as well, the innervation of the dental mesenchyme was observed already after one week of implantation, but axons reached the odontoblast layer after two weeks only. This study demonstrated that immunodepression per se does stimulate the innervation of the dental mesenchyme.

Differentiation of induced pluripotent stem cells into dental mesenchymal cells

Similar to embryonic stem cells, induced pluripotent stem (iPS) cells can differentiate into various cell types upon appropriate induction, and thus, may be valuable cell sources for regenerative medicine. However, iPS cells have not been reported to differentiate into odontogenic cells for tooth regeneration. Here we demonstrated that neural crest-like cells (NCLC) derived from mouse iPS cells have the potential to differentiate into odontogenic mesenchymal cells. We developed an efficient culture protocol to induce the differentiation of mouse iPS cells into NCLC. We confirmed that the cells exhibited neural crest (NC) cell markers as evidenced by immunocytochemistry, flow cytometry, and real-time reverse transcription-polymerase chain reaction. Further, in recombination cultures of NCLC and mouse dental epithelium, NCLC exhibited a gene expression pattern involving dental mesenchymal cells. Some NCLC also expressed dentin sialoprotein. Conditioned medium of mouse dental epithelium cultures further enhanced the differentiation of NCLC into odontoblasts. These results suggest that iPS cells are useful cell sources for tooth regeneration and tooth development studies.

The proteome and gene expression profile of cementoblastic cells treated by bone morphogenetic protein-7 in vitro

AIM

Regenerative periodontal therapy is often unpredictable and limited. Cementum regeneration is necessary for the proper repair of a periodontal ligament. The precise mechanism how bone morphogenetic protein-7 (BMP7) induces differentiation and mineralization of cementoblasts remains undetermined. The purpose of this study was to evaluate the effect of BMP7 on early proteome and gene expression profile of cementoblastic OCCM.30 cells in vitro.

MATERIALS AND METHODS

Immortalized murine cementoblasts (OCCM.30) were exposed to BMP7 and evaluated for: (1) proliferation; (2) mineralization; (3) early proteome profile using liquid chromatography-mass spectrometry (LC-MS); and (4) gene expression by quantitative RT-PCR.

RESULTS

Bone morphogenetic protein-7 increased the cell proliferation at 24 h and 48 h, while higher doses suppressed the cell proliferation at 48 h. BMP7 induced the mineralization of cementoblasts following 8 days of therapy. Using LC-MS we identified 1117 proteins from the cell lysate. Many belonged to extracellular matrix formation such as PCPE1, collagens, annexins and integrin receptors. RT-PCR analyses revealed a BMP7 dose-dependent upregulation of BMP1, TGFβ1, osterix, osteoprotegerin, procollagen I and II, PCPE1, and noggin, while BMP6 and chordin expression were decreased. The high BMP7 dose down regulated most of the genes 24 h following therapy.

CONCLUSION

Bone morphogenetic protein-7 promotes differentiation and mineralization of cementoblasts via inducing PCPE1 and BMP1 responsible for processing of type I collagen.

[Biological dental implant: myth or reality?]

The currently available options for tooth-loss are prostheses, implants, or surgery (auto-transplantation). They all have their limitations. The emergence of tissue engineering, 15 years ago, was made possible by a better knowledge of the various stages of dental development, and the mastery of stem cell differentiation. It opened a new alternative approach for tooth regeneration. Even if animal experiments have demonstrated that it was possible to obtain a biological tooth from stem cells, two major issues remain to be discussed. Is it possible to use induced pluripotent stem cells instead of embryonic stem cells, which raise an ethical problem? Is it possible to reproduce a dental crown with an adapted shape and colour? Or should we consider the simpler creation of a biological root secondarily covered by a ceramic prosthesis? Our study mentions the main landmarks and the key cells involved in the embryological development of the tooth, establishes a mapping and a list of the various types of stem cells. It details the various methods used to create a biological implant.

Tooth engineering: searching for dental mesenchymal cells sources

The implantation of cultured re-associations between embryonic dental mesenchymal cells and epithelial cells from mouse molars at embryonic day 14 (ED14) allowed making full teeth with crown, root, periodontal ligament fibers, and bone. Although representing valuable tools to set up methodologies embryonic cells are not easily available. This work thus aimed to replace the embryonic cells by dental mesenchymal cell lines or cultured expanded embryonic cells, and to test their ability to mediate tooth development in vitro when re-associated with a competent dental epithelium. Histology, immunostaining and RT-PCR allowed getting complementary sets of results. Two different immortalized cell lines from ED18 dental mesenchyme failed in mediating tooth formation. The potentialities of embryonic dental mesenchymal cells decreased from ED14 to ED16 and were lost at ED18. This is likely related to a change in the mesenchymal cell phenotype and/or populations during development. Attempts to cultivate ED14 or ED16 embryonic dental mesenchymal cells prior to re-association led to the loss of their ability to support tooth development. This was accompanied by a down-regulation of Fgf3 transcription. Supplementation of the culture medium with FGF2 allowed restoring Fgf3 expression, but not the ability of mesenchymal cells to engage in tooth formation. Altogether, these observations suggest that a competent cell population exists in the dental mesenchyme at ED14, progressively decreases during development, and cannot as such be maintained in vitro. This study evidenced the need for specific conditions to maintain the ability of dental mesenchymal cells to initiate whole tooth formation, when re-associated with an odontogenic epithelium. Efforts to improve the culture conditions will have to be combined with attempts to characterize the competent cells within the dental mesenchyme.