Decellularized Human Dental Pulp as a Scaffold for Regenerative Endodontics

Preparation and characterization of bovine dental pulp-derived extracellular matrix hydrogel for regenerative endodontic applications: an in vitro study

BACKGROUND

The use of biological scaffolds in regenerative endodontics has gained much attention in recent years. The search for a new biomimetic scaffold that contains tissue-specific cell homing factors could lead to more predictable tissue regeneration. The aim of this study was to prepare and characterize decellularized bovine dental pulp-derived extracellular matrix (P-ECM) hydrogels for regenerative endodontic applications.

METHODS

Freshly extracted bovine molar teeth were collected. Bovine dental pulp tissues were harvested, and stored at -40º C. For decellularization, a 5-day protocol was implemented incorporating trypsin/EDTA, deionized water and DNase treatment. Decellularization was evaluated by DNA quantification and histological examination to assess collagen and glycosaminoglycans (GAGs) content. This was followed by the preparation of P-ECM hydrogel alone or combined with hyaluronic acid gel (P-ECM + HA). The fabricated scaffolds were then characterized using protein quantification, hydrogel topology and porosity, biodegradability, and growth factor content using Enzyme-linked immunosorbent assay (ELISA): transforming growth factor beta-1(TGF-β1), basic fibroblast growth factor (bFGF), bone morphogenetic protein 2 (BMP-2) and vascular endothelial growth factor (VEGF).

RESULTS

Decellularization was histologically confirmed, and DNA content was below (50 ng/mg tissue). P-ECM hydrogel was prepared with a final ECM concentration of 3.00 mg/ml while P-ECM + HA hydrogel was prepared with a final ECM concentration of 1.5 mg/ml. Total protein content in P-ECM hydrogel was found to be (439.0 ± 123.4 µg/µl). P-ECM + HA showed sustained protein release while the P-ECM group showed gradual decreasing release. Degradation was higher in P-ECM + HA which had a significantly larger fiber diameter, while P-ECM had a larger pore area percentage. ELISA confirmed the retention and release of growth factors where P-ECM hydrogel had higher BMP-2 release, while P-ECM + HA had higher release of TGF-β1, bFGF, and VEGF.

CONCLUSIONS

Both P-ECM and P-ECM + HA retained their bioactive properties demonstrating a potential role as functionalized scaffolds for regenerative endodontic procedures.

Histological characterization of pulp regeneration using decellularized human dental pulp and mesenchymal stem cells in a feline model

Regenerative endodontics aims to restore pulp tissues, thus preserving the vitality of the tooth. One promising approach involves the utilization of decellularized human dental pulp (DHDP) as a scaffold repopulated with Wharton's Jelly mesenchymal stem cells (WJMSCs). This study aimed to regenerate pulp tissues using DHDP and WJMSCs following pulpectomy in mature canine teeth of a feline animal model and to investigate the histological features of the regenerated pulp. A 12-month-old male domestic shorthaired felines were used as subjects. Teeth were categorized into untreated (Group 1), pulpectomy with mineral trioxide aggregate (MTA) (Group 2), and pulpectomy with DHDP-repopulated scaffold and MTA (Group 3). The animals were sacrificed six weeks post-intervention. H&E and immunohistochemistry using anti-collagen type 1 and laminin antibodies were used to stain the tissue sections. Histological examinations presented pulp-like tissues in Group 3, with tissue components similar to the structures found in Group 1. Immunohistochemical analysis demonstrated the presence of collagen type I and laminin within the regenerated tissues. The root canals of teeth in Group 2 were devoid of pulpal tissue. DHDP with WJMSCs can potentially be used for pulp regeneration, supporting the modality for developing new clinical protocols in stem cell therapy.

Decellularized extracellular matrix derived from dental pulp stem cells promotes gingival fibroblast adhesion and migration

BACKGROUND

Decellularized extracellular matrix (dECM) has been proposed as a useful source of biomimetic materials for regenerative medicine due to its biological properties that regulate cell behaviors. The present study aimed to investigate the influence of decellularized ECM derived from dental pulp stem cells (DPSCs) on gingival fibroblast (GF) cell behaviors. Cells were isolated from dental pulp and gingival tissues. ECM was derived from culturing dental pulp stem cells in growth medium supplemented with ascorbic acid. A bioinformatic database of the extracellular matrix was constructed using Metascape. GFs were reseeded onto dECM, and their adhesion, spreading, and organization were subsequently observed. The migration ability of the cells was determined using a scratch assay. Protein expression was evaluated using immunofluorescence staining.

RESULTS

Type 1 collagen and fibronectin were detected on the ECM and dECM derived from DPSCs. Negative phalloidin and nuclei were noted in the dECM. The proteomic database revealed enrichment of several proteins involved in ECM organization, ECM-receptor interaction, and focal adhesion. Compared with those on the controls, the GFs on the dECM exhibited more organized stress fibers. Furthermore, cultured GFs on dECM exhibited significantly enhanced migration and proliferation abilities. Interestingly, GFs seeded on dECM showed upregulation of FN1, ITGB3, and CTNNB1 mRNA levels.

CONCLUSIONS

ECM derived from DSPCs generates a crucial microenvironment for regulating GF adhesion, migration and proliferation. Therefore, decellularized ECM from DPSCs could serve as a matrix for oral tissue repair.

Comparative Analysis of Commercially Available Extracellular Matrix Soft Tissue Bioscaffolds

Decellularized extracellular matrix (dECM) products are widely established for soft tissue repair, reconstruction, and reinforcement. These regenerative biomaterials mimic native tissue ECM with respect to structure and biology and are produced from a range of tissue sources and species. Optimal source tissue processing requires a balance between removal of cellular material and the preservation of structural and biological properties of tissue ECM. Despite the widespread clinical use of dECM products there is a lack of comparative information on these products. This study provides a comparative analysis of 12 commercially available dECM products. One group of products consisted of materials intended for dermal repair including ovine forestomach matrix (OFMm), porcine peritoneum (PPN), porcine placenta (PPC), and porcine small intestinal submucosa (SISu). The second group, intended for load-bearing reconstruction, consisted of material derived from ovine forestomach matrix (OFMo), porcine urinary bladder matrix (UBM), porcine small intestinal submucosa (SISb and SISz), human dermis (ADM), porcine dermis (PADM), and fetal/neonatal bovine dermis (BADM). A minimally processed product consisting of human placental tissue was included as a control. Products were compared histologically and by agarose gel electrophoreses to assess structural features and decellularization. Structurally, some dECM products showed a well-preserved collagen architecture with a broad porosity distribution, whereas others showed a significantly altered structure compared with native tissue. Decellularization varied across the products. Some materials surveyed (OFMm, PPN, PPC, OFMo, UBM, SISz, ADM, PADM, and BADM) were essentially devoid of nuclear bodies (mean count of <5 cells per high-powered field [HPF]), whereas others (SISu and SISb) demonstrated an abundance of nuclear bodies (>50 cells per HPF). Pathology assessment of the products demonstrated that OFMm, OFMo, and PADM had the highest qualitative assessment score for collagen fiber orientation and arrangement, matrix porosity, decellularization efficiency, and residual vascular channels scoring 10.5 ± 0.8, 12.8 ± 1.0, and 9.7 ± 0.7 out of a maximum total score of 16, respectively. This analysis of commercially available dECM products in terms of their structure and cellularity includes 12 different commercial materials. The findings highlight the variability of the products in terms of matrix structure and the efficacy of decellularization.

Biomimetic pulp scaffolds prepared from extracellular matrix derived from stem cells from human exfoliated deciduous teeth promote pulp-dentine complex regeneration

AIM

To evaluate the role of biomimetic pulp scaffolds derived from the extracellular matrix derived of stem cells from human exfoliated deciduous teeth (SHED-ECM-PS) in promoting pulp-dentine complex regeneration.

METHODOLOGY

SHED-ECM-PS was prepared through cell aggregation and decellularization techniques. Histological and immunofluorescence analyses, scanning electron microscopy, and DNA quantification assays were used to characterize the SHED-ECM-PS. Additionally, a tooth slice implantation model was established to evaluate the effects of SHED-ECM-PS on regeneration of the pulp-dentine complex in vivo. Extraction medium for SHED-ECM-PS was prepared, and its effect on bone marrow mesenchymal stem cells (BMMSCs) was assessed in vitro. Cell counting kit-8 and Ki-67 staining assays were performed to determine cell proliferation. The rate of apoptosis was evaluated by flow cytometry. Wound healing and transwell assays were conducted to evaluate cell migration. Alizarin red S staining was performed to examine mineralized nodule formation. Western blotting was used to detect the expression of osteogenic and odontogenic markers. The results were analysed using an independent two-tailed Student's t-test. p < .05 was considered statistically significant.

RESULTS

SHED-ECM-PS was successfully constructed, exhibiting a striped dental pulp-like shape devoid of nuclear structures or DNA components, and rich in fibronectin, collagen I, DMP1 and DSPP. Notably, SHED-ECM-PS showed no impact on the proliferation or apoptosis of BMMSCs. Histological analysis revealed that dental pulp fibroblasts formed an interwoven mesh in the root canal, and angiogenesis was observed in the SHED-ECM-PS group. Moreover, a continuous, newly formed tubular dentine layer with polarized odontoblast-like cells was observed along the inner wall of the root canal. SHED-ECM-PS promoted the migration, polar alignment and mineralized nodule formation of BMMSCs and specifically elevated the expression levels of odontogenic markers, but not osteogenic markers, compared with the control group in vitro.

CONCLUSION

SHED-ECM-PS exhibited no cytotoxicity and promoted pulp-dentine complex regeneration in vivo as well as cell migration and odontogenic differentiation of BMMSCs in vitro. These findings provide evidence that SHED-ECM-PS, as a novel biological scaffold, has the potential to improve the outcomes of REPs.

Periapical lesion-derived decellularized extracellular matrix as a potential solution for regenerative endodontics

Pulp regeneration remains a crucial target in the preservation of natural dentition. Using decellularized extracellular matrix is an appropriate approach to mimic natural microenvironment and facilitate tissue regeneration. In this study, we attempted to obtain decellularized extracellular matrix from periapical lesion (PL-dECM) and evaluate its bioactive effects. The decellularization process yielded translucent and viscous PL-dECM, meeting the standard requirements for decellularization efficiency. Proteomic sequencing revealed that the PL-dECM retained essential extracellular matrix components and numerous bioactive factors. The PL-dECM conditioned medium could enhance the proliferation and migration ability of periapical lesion-derived stem cells (PLDSCs) in a dose-dependent manner. Culturing PLDSCs on PL-dECM slices improved odontogenic/angiogenic ability compared to the type I collagen group. In vivo, the PL-dECM demonstrated a sustained supportive effect on PLDSCs and promoted odontogenic/angiogenic differentiation. Both in vitro and in vivo studies illustrated that PL-dECM served as an effective scaffold for pulp tissue engineering, providing valuable insights into PLDSCs differentiation. These findings pave avenues for the clinical application of dECM's in situ transplantation for regenerative endodontics.

Histologic and proteomic profile of two methods to decellularize human dental pulp tissue

OBJECTIVE

The present study compared the structural and proteomic architecture of extracellular matrices (ECM) of decellularized human dental pulp using two previously described protocols.

DESIGN

Pulp tissue from 150 molars was extracted and three treatments took place, based on the Matoug-Elwerfelli Group (MG) and the Song Group (SG) protocols and an untreated pulp group (CG), to examine histoarchitecture and the effectiveness of the decellularization process, using histological analysis (n = 12) and scanning electron microscopy (SEM) (n = 3). Protein extraction took place using 100 mg dry weight of pulp, in triplicates for each group, and the shotgun proteome analysis was performed by nanoUPLC-MSE. Proteins were identified using the revised human UNIPROT database attached to the PLGS search engine.

RESULTS

Histological analysis and SEM demonstrated that ECM in MG was more preserved. Proteome analysis showed that the decellularized process in MG maintained approximately 69.56% of proteins identified in untreated pulp tissue while SG maintained 28.26%.

CONCLUSIONS

ECM appears to be suitable as a potential biological scaffold for pulp revascularization and regeneration procedures, especially those processed according to the Matoug-Elwerfelli protocol. This finding can collaborate to enhance clinical solutions for young permanent teeth that have suffered necrosis.

Scaffolds for Dentin-Pulp Complex Regeneration

Background and Objectives: Regenerative dentistry aims to regenerate the pulp-dentin complex and restore those of its functions that have become compromised by pulp injury and/or inflammation. Scaffold-based techniques are a regeneration strategy that replicate a biological environment by utilizing a suitable scaffold, which is considered crucial for the successful regeneration of dental pulp. The aim of the present review is to address the main characteristics of the different scaffolds, as well as their application in dentin-pulp complex regeneration. Materials and Methods: A narrative review was conducted by two independent reviewers to answer the research question: What type of scaffolds can be used in dentin-pulp complex regeneration? An electronic search of PubMed, EMBASE and Cochrane library databases was undertaken. Keywords including "pulp-dentin regeneration scaffold" and "pulp-dentin complex regeneration" were used. To locate additional reports, reference mining of the identified papers was undertaken. Results: A wide variety of biomaterials is already available for tissue engineering and can be broadly categorized into two groups: (i) natural, and (ii) synthetic, scaffolds. Natural scaffolds often contain bioactive molecules, growth factors, and signaling cues that can positively influence cell behavior. These signaling molecules can promote specific cellular responses, such as cell proliferation and differentiation, crucial for effective tissue regeneration. Synthetic scaffolds offer flexibility in design and can be tailored to meet specific requirements, such as size, shape, and mechanical properties. Moreover, they can be functionalized with bioactive molecules, growth factors, or signaling cues to enhance their biological properties and the manufacturing process can be standardized, ensuring consistent quality for widespread clinical use. Conclusions: There is still a lack of evidence to determine the optimal scaffold composition that meets the specific requirements and complexities needed for effectively promoting dental pulp tissue engineering and achieving successful clinical outcomes.

Biomedical Application of Decellularized Scaffolds

Tissue loss and end-stage organ failure are serious health problems across the world. Natural and synthetic polymer scaffold material based artificial organs play an important role in the field of tissue engineering and organ regeneration, but they are not from the body and may cause side effects such as rejection. In recent years, the biomimetic decellularized scaffold based materials have drawn great attention in the tissue engineering field for their good biocompatibility, easy modification, and excellent organism adaptability. Therefore, in this review, we comprehensively summarize the application of decellularized scaffolds in tissue engineering and biomedicine in recent years. The preparation methods, modification strategies, construction of artificial tissues, and application in biomedical applications are discussed. We hope that this review will provide a useful reference for research on decellularized scaffolds and promote their application tissue engineering.

Endodontic Tissue Regeneration: A Review for Tissue Engineers and Dentists

The paradigm shift in the endodontic field from replacement toward regenerative therapies has witnessed the ever-growing research in tissue engineering and regenerative medicine targeting pulp-dentin complex in the past few years. Abundant literature on the subject that has been produced, however, is scattered over diverse areas of knowledge. Moreover, the terminology and concepts are not always consensual, reflecting the range of research fields addressing this subject, from endodontics to biology, genetics, and engineering, among others. This fact triggered some misinterpretations, mainly when the denominations of different approaches were used as synonyms. The evaluation of results is not precise, leading to biased conjectures. Therefore, this literature review aims to conceptualize the commonly used terminology, summarize the main research areas on pulp regeneration, identify future trends, and ultimately clarify whether we are really on the edge of a paradigm shift in contemporary endodontics toward pulp regeneration.

Mesenchymal condensation in tooth development and regeneration: a focus on translational aspects of organogenesis

The teeth are vertebrate-specific, highly specialized organs performing fundamental functions of mastication and speech, the maintenance of which is crucial for orofacial homeostasis and is further linked to systemic health and human psychosocial well-being. However, with limited ability for self-repair, the teeth can often be impaired by traumatic, inflammatory, and progressive insults, leading to high prevalence of tooth loss and defects worldwide. Regenerative medicine holds the promise to achieve physiological restoration of lost or damaged organs, and in particular an evolving framework of developmental engineering has pioneered functional tooth regeneration by harnessing the odontogenic program. As a key event of tooth morphogenesis, mesenchymal condensation dictates dental tissue formation and patterning through cellular self-organization and signaling interaction with the epithelium, which provides a representative to decipher organogenetic mechanisms and can be leveraged for regenerative purposes. In this review, we summarize how mesenchymal condensation spatiotemporally assembles from dental stem cells (DSCs) and sequentially mediates tooth development. We highlight condensation-mimetic engineering efforts and mechanisms based on ex vivo aggregation of DSCs, which have achieved functionally robust and physiologically relevant tooth regeneration after implantation in animals and in humans. The discussion of this aspect will add to the knowledge of development-inspired tissue engineering strategies and will offer benefits to propel clinical organ regeneration.

The current regenerative medicine approaches of craniofacial diseases: A narrative review

Craniofacial deformities (CFDs) develop following oncological resection, trauma, or congenital disorders. Trauma is one of the top five causes of death globally, with rates varying from country to country. They result in a non-healing composite tissue wound as they degenerate in soft or hard tissues. Approximately one-third of oral diseases are caused by gum disease. Due to the complexity of anatomical structures in the region and the variety of tissue-specific requirements, CFD treatments present many challenges. Many treatment methods for CFDs are available today, such as drugs, regenerative medicine (RM), surgery, and tissue engineering. Functional restoration of a tissue or an organ after trauma or other chronic diseases is the focus of this emerging field of science. The materials and methodologies used in craniofacial reconstruction have significantly improved in the last few years. A facial fracture requires bone preservation as much as possible, so tiny fragments are removed initially. It is possible to replace bone marrow stem cells with oral stem cells for CFDs due to their excellent potential for bone formation. This review article discusses regenerative approaches for different types of craniofacial diseases.

Injectable decellularized dental pulp matrix-functionalized hydrogel microspheres for endodontic regeneration

The sufficient imitation of tissue structures and components represents an effective and promising approach for tissue engineering and regenerative medicine applications. Dental pulp disease is one of the most common oral diseases, although functional pulp regeneration remains challenging. Herein, we propose a strategy that employs hydrogel microspheres incorporated with decellularized dental pulp matrix-derived bioactive factors to simulate a pulp-specific three-dimensional (3D) microenvironment. The dental pulp microenvironment-specific microspheres constructed by this regenerative strategy exhibited favorable plasticity, biocompatibility, and biological performances. Human dental pulp stem cells (hDPSCs) cultured on the constructed microspheres exhibited enhanced pulp-formation ability in vitro. Furthermore, the hDPSCs-microcarriers achieved the regeneration of pulp-like tissue and new dentin in a semi-orthotopic model in vivo. Mechanistically, the decellularized pulp matrix-derived bioactive factors mediated the multi-directional differentiation of hDPSCs to regenerate the pulp tissue by eliciting the secretion of crucial bioactive cues. Our findings demonstrated that a 3D dental pulp-specific microenvironment facilitated by hydrogel microspheres and dental pulp-specific bioactive factors regenerated the pulp-dentin complex and could be served as a promising treatment option for dental pulp disease. STATEMENT OF SIGNIFICANCE: Injectable bioscaffolds are increasingly used for regenerative endodontic treatment. Despite their success related to their ability to load stem cells, bioactive factors, and injectability, conventional bulk bioscaffolds have drawbacks such as ischemic necrosis in the central region. Various studies have shown that ischemic necrosis in the central region can be corrected by injectable hydrogel microspheres. Unfortunately, pristine microspheres or microspheres without dental pulp-specific bioactive factor would oftentimes fail to regulate stem cells fates in dental pulp multi-directional differentiation. Our present study reported the biofabrication of dental pulp-derived decellularized matrix functionalized gelatin microspheres, which contained dental pulp-specific bioactive factors and have the potential application in endodontic regeneration.

Creating a Microenvironment to Give Wings to Dental Pulp Regeneration-Bioactive Scaffolds

Dental pulp and periapical diseases make patients suffer from acute pain and economic loss. Although root canal therapies, as demonstrated through evidence-based medicine, can relieve symptoms and are commonly employed by dentists, it is still difficult to fully restore a dental pulp's nutrition, sensory, and immune-regulation functions. In recent years, researchers have made significant progress in tissue engineering to regenerate dental pulp in a desired microenvironment. With breakthroughs in regenerative medicine and material science, bioactive scaffolds play a pivotal role in creating a suitable microenvironment for cell survival, proliferation, and differentiation, following dental restoration and regeneration. This article focuses on current challenges and novel perspectives about bioactive scaffolds in creating a microenvironment to promote dental pulp regeneration. We hope our readers will gain a deeper understanding and new inspiration of dental pulp regeneration through our summary.

Decellularized rat submandibular gland as an alternative scaffold for dental pulp regeneration

Introduction: Decellularized extracellular matrix has been recognized as an optimal scaffold for dental pulp regeneration. However, the limited amount of native dental pulp tissue restricts its clinical applications. The submandibular gland shares some basic extracellular matrix components and characteristics with dental pulp. However, whether decellularized submandibular gland extracellular matrix (DSMG) can be used as an alternative scaffold for dental pulp regenerative medicine is unclear. Methods: Thus, we successfully decellularized the whole rat submandibular gland and human dental pulp, and then conducted in vitro and in vivo studies to compare the properties of these two scaffolds for dental pulp regeneration. Results: Our results showed that extracellular matrix of the submandibular gland had great similarities in structure and composition with that of dental pulp. Furthermore, it was confirmed that the DSMG could support adhesion and proliferation of dental pulp stem cells in vitro. In vivo findings revealed that implanted cell-seeded DSMG formed a vascularized dental pulp-like tissue and expressed markers involved in dentinogenesis and angiogenesis. Discussion: In summary, we introduced a novel accessible biological scaffold and validated its effectiveness as an extracellular matrix-based tissue engineering scaffold for dental pulp regenerative therapy.

Towards a New Concept of Regenerative Endodontics Based on Mesenchymal Stem Cell-Derived Secretomes Products

The teeth, made up of hard and soft tissues, represent complex functioning structures of the oral cavity, which are frequently affected by processes that cause structural damage that can lead to their loss. Currently, replacement therapy such as endodontics or implants, restore structural defects but do not perform any biological function, such as restoring blood and nerve supplies. In the search for alternatives to regenerate the dental pulp, two alternative regenerative endodontic procedures (REP) have been proposed: (I) cell-free REP (based in revascularization and homing induction to remaining dental pulp stem cells (DPSC) and even stem cells from apical papilla (SCAP) and (II) cell-based REP (with exogenous cell transplantation). Regarding the last topic, we show several limitations with these procedures and therefore, we propose a novel regenerative approach in order to revitalize the pulp and thus restore homeostatic functions to the dentin-pulp complex. Due to their multifactorial biological effects, the use of mesenchymal stem cells (MSC)-derived secretome from non-dental sources could be considered as inducers of DPSC and SCAP to completely regenerate the dental pulp. In partial pulp damage, appropriate stimulate DPSC by MSC-derived secretome could contribute to formation and also to restore the vasculature and nerves of the dental pulp.

The Regenerative Potential of Decellularized Dental Pulp Extracellular Matrix: A Systematic Review

INTRODUCTION

The regeneration of dental pulp remains a challenge. Although several treatment modalities have been proposed to promote pulpal regeneration, these treatments have several drawbacks. More recently, decellularized dental pulp extracellular matrix (DP-ECM) has been proposed to regenerate dental pulp. However, to date, no systematic review has summarized the overall outcome and assessed the available literature focusing on the endodontic use of DP-ECM. The aim of this systematic review is to critically appraise the literature, summarize the overall outcomes, and provide clinical recommendations about DP-ECM.

METHODOLOGY

Following the Participants Intervention Control and Outcomes (PICO) principle, a focused question was constructed before conducting a search of the literature and of electronic research databases and registers. The focused question was: 'Compared to controls, does decellularized dental pulp extracellular matrix (DP-ECM) stimulate the regeneration of dental pulp cells and tissue?' Quality assessment of the studies was carried out using Guidelines for Reporting Pre-Clinical in Vitro Studies on Dental Materials and ARRIVE guidelines.

RESULTS

12 studies were included in this review. Data from five in vitro experiments and eight in vivo experiments were extracted and the quality of the experiments was assessed. In majority of the studies, DP-ECM appeared to have stimulated pulpal regeneration. However, several sources of bias and methodological deficiencies were found during the quality assessment.

CONCLUSION

Within the limitations of this review and the included studies, it may be concluded that there is insufficient evidence to deduce the overall efficacy of DP-ECM for pulpal regeneration. More research, clinical and pre-clinical, is required for more conclusive evidence.

Advances in Scaffolds Used for Pulp-Dentine Complex Tissue Engineering - A Narrative Review

Pulp necrosis in immature teeth disrupts root development and predisposes roots to fracture as a consequence of their thin walls and open apices. Regenerative endodontics is a developing treatment modality whereby necrotic pulps are replaced with newly formed healthy tissue inside the root canal. Many clinical studies have demonstrated the potential of this strategy to stimulate root maturation and apical root-end closure. However, clinical outcomes are patient-dependent and unpredictable. The development of predictable clinical protocols is achieved through the interplay of the three classical elements of tissue engineering, namely, stem cells, signaling molecules, and scaffolds. Scaffolds provide structural support for cells to adhere and proliferate and also regulate cell differentiation and metabolism. Hence, designing and fabricating an appropriate scaffold is a crucial step in tissue engineering. In this review, four main classes of scaffolds used to engineer pulp-dentine complexes, including bioceramic-based scaffolds, synthetic polymer-based scaffolds, natural polymer-based scaffolds, and composite scaffolds, are covered. Additionally, recent advances in the design, fabrication, and application of such scaffolds are analysed along with their advantages and limitations. Finally, the importance of vascular network establishment in the success of pulp-dentine complex regeneration and strategies used to create scaffolds to address this challenge are discussed.

Poly(Caprolactone)-Aligned Nanofibers Associated with Fibronectin-loaded Collagen Hydrogel as a Potent Bioactive Scaffold for Cell-Free Regenerative Endodontics

AIM

Guided tissue regeneration has been considered a promising strategy to replace conventional endodontic therapy of teeth with incomplete root formation. Therefore, the objective of this study was to develop a tubular scaffold (TB-SC) with poly (caprolactone)-aligned nanofibers associated with a fibronectin-loaded collagen hydrogel and assess the pulp regeneration potential mediated by human apical papilla cells (hAPCs) using an in vitro model of teeth with incomplete root formation.

METHODOLOGY

Aligned nanofiber strips based on 10% poly(caprolactone) (PCL) were synthesized with the electrospinning technique to produce the TB-SCs. These were submitted to different treatments, according to the following groups: TB-SC (negative control): TB-SC without treatment; TB-SC+FN (positive control): TB-SC coated with 10 μg/mL of fibronectin; TB-SC+H: TB-SC associated with collagen hydrogel; TB-SC+HFN: TB-SC associated with fibronectin-loaded collagen hydrogel. Then, the biomaterials were inserted into cylindrical devices to mimic the regenerative therapy of teeth with incomplete root formation. The hAPCs were seeded on the upper surface of the TB-SCs associated or not with any treatment, and cell migration/proliferation and the gene expression of markers related to pulp regeneration (ITGA5, ITGAV, COL1A1, and COL1A3) were evaluated. The data were submitted to ANOVA/Tukey's tests (α=5 %).

RESULTS

Higher values of cell migration/proliferation and gene expression of all markers tested were observed in groups TB-SC+FN, TB-SC+H, and TB-SC+HFN compared with the TB-SC group (p<0.05). The hAPCs in the TB-SC+HFN group showed the highest values of cell proliferation and gene expression of COL1A1 and COL3A1 (p<0.05), as well as superior cell migration results to groups TB-SC and TB-SC+H (p<0.05).

CONCLUSION

Aligned nanofiber scaffolds associated with the fibronectin-loaded collagen hydrogel enhanced the migration and proliferation of hAPCs, and gene expression of pulp regeneration markers. Therefore, the use of these biomaterials may be considered an interesting strategy for regenerative pulp therapy of teeth with incomplete root formation.

Effects of decellularized extracellular matrix derived from Jagged1-treated human dental pulp stem cells on biological responses of stem cells isolated from apical papilla

Objective: Indirect Jagged1 immobilization efficiently activates canonical Notch signaling in human dental pulp stem cells (hDPSCs). This study aimed to investigate the characteristics of the Jagged1-treated hDPSC-derived decellularized extracellular matrix (dECM) and its biological activity on odonto/osteogenic differentiation of stem cells isolated from apical papilla (SCAPs).

Methods: Bioinformatic database of Jagged1-treated hDPSCs was analyzed using NetworkAnalyst. hDPSCs seeded on the Jagged1 immobilized surface were maintained with normal or osteogenic induction medium (OM) followed by decellularization procedure, dECM-N, or dECM-OM, respectively. SCAPs were reseeded on each dECM with either the normal medium or the OM. Cell viability was determined by MTT assay. Characteristics of dECMs and SCAPs were evaluated by SEM, EDX, immunofluorescent staining, and alcian blue staining. Mineralization was assessed by alizarin red S, Von Kossa, and alkaline phosphatase staining. Statistical significance was considered at p < 0.05.

Results: RNA-seq database revealed upregulation of several genes involved in ECM organization, ECM–receptor interaction, and focal adhesion in Jagged1-treated hDPSCs. Immobilized Jagged1 increased the osteogenesis of the hDPSC culture with OM. dECMs showed fibrillar-like network structure and maintained major ECM proteins, fibronectin, type I-collagen, and glycosaminoglycans. A decrease in calcium and phosphate components was observed in dECMs after the decellularized process. Cell viability on dECMs did not alter by 7 days. Cell attachment and f-actin cytoskeletal organization of SCAPs proliferated on Jagged1-treated dECMs were comparable to those of the control dECMs. SCAPs exhibited significantly higher mineralization on dECM-N in OM and markedly enhanced on dECM-OM with normal medium or OM conditions.

Conclusion: Jagged1-treated hDPSC-derived dECMs are biocompatible and increase odonto/osteogenic differentiation of SCAPs. The results suggested the potential of Jagged1 dECMs, which could be further developed into ECM scaffolds for application in regenerative medicine.

Biomaterial scaffolds for clinical procedures in endodontic regeneration

Regenerative endodontic procedures have been rapidly evolving over the past two decades and are employed extensively in clinical endodontics. These procedures have been perceived as valuable adjuvants to conventional strategies in the treatment of necrotic immature permanent teeth that were deemed to have poor prognosis. As a component biological triad of tissue engineering (i.e., stem cells, growth factors and scaffolds), biomaterial scaffolds have demonstrated clinical potential as an armamentarium in regenerative endodontic procedures and achieved remarkable advancements. The aim of the present review is to provide a broad overview of biomaterials employed for scaffolding in regenerative endodontics. The favorable properties and limitations of biomaterials organized in naturally derived, host-derived and synthetic material categories were discussed. Preclinical and clinical studies published over the past five years on the performance of biomaterial scaffolds, as well as current challenges and future perspectives for the application of biomaterials for scaffolding and clinical evaluation of biomaterial scaffolds in regenerative endodontic procedures were addressed in depth.

•

Overview of biomaterials for scaffolding in regenerative endodontics are presented.

•

Findings of preclinical and clinical studies on the performance of biomaterial scaffolds are summarized.

•

Challenges and future prospects in biomaterial scaffolds are discussed.

The Progress of Decellularized Scaffold in Stomatology

The oral and maxillofacial region contains oral organs and facial soft tissues. Due to the complexity of the structures and functions of this region, the repair of related defects is complicated. Different degrees of defects require different repair methods, which involve a great combination of medicine and art, and the material requirements are extremely high. Hence, clinicians are plagued by contemporary oral repair materials due to the limitations of bone harvesting, immune rejection, low osteogenic activity and other problems. Decellularized extracellular matrix has attracted much attention as a bioactive scaffold material because of its nonimmunogenic properties, good osteogenic properties, slow release of growth factors, promotion of seed cell adhesion and maintenance of stem cell characteristics. This article reviews the sources, preparation methods, application and research progress of extracellular matrix materials in the repair of oral and maxillofacial defects to provide an overview for fundamental research and clinical development.

Clinical Potential of Dental Pulp Stem Cells in Pulp Regeneration: Current Endodontic Progress and Future Perspectives

Dental caries is a common disease that not only destroys the rigid structure of the teeth but also causes pulp necrosis in severe cases. Once pulp necrosis has occurred, the most common treatment is to remove the damaged pulp tissue, leading to a loss of tooth vitality and increased tooth fragility. Dental pulp stem cells (DPSCs) isolated from pulp tissue exhibit mesenchymal stem cell-like characteristics and are considered ideal candidates for regenerating damaged dental pulp tissue owing to their multipotency, high proliferation rate, and viability after cryopreservation. Importantly, DPSCs do not elicit an allogeneic immune response because they are non-immunogenic and exhibit potent immunosuppressive properties. Here, we provide an up-to-date review of the clinical applicability and potential of DPSCs, as well as emerging trends in the regeneration of damaged pulp tissue. In addition, we suggest the possibility of using DPSCs as a resource for allogeneic transplantation and provide a perspective for their clinical application in pulp regeneration.

Extracellular Matrix Derived From Dental Pulp Stem Cells Promotes Mineralization

Background: Extracellular matrix (ECM) plays a pivotal role in many physiological processes. ECM macromolecules and associated factors differ according to tissues, impact cell differentiation, and tissue homeostasis. Dental pulp ECM may differ from other oral tissues and impact mineralization. Thus, the present study aimed to identify the matrisome of ECM proteins derived from human dental pulp stem cells (DPSCs) and its ability to regulate mineralization even in cells which do not respond to assaults by mineralization, the human gingival fibroblasts (GF).

Methods: ECM were extracted from DPSCs cultured in normal growth medium supplemented with L-ascorbic acid (N-ECM) or in osteogenic induction medium (OM-ECM). ECM decellularization (dECM) was performed using 0.5% triton X-100 in 20 mM ammonium hydroxide after 21 days. Mass spectrometry and proteomic analysis identified and quantified matrisome proteins.

Results: The dECM contained ECM proteins but lacked cellular components and mineralization. Interestingly, collagens (COL6A1, COL6A2, and COL6A3) and elastic fibers (FBN1, FBLN2, FN1, and HSPG2) were significantly represented in N-ECM, while annexins (ANXA1, ANXA4, ANXA5, ANXA6, ANXA7, and ANXA11) were significantly overdetected in OM-ECM. GF were reseeded on N-dECM and OM-dECM and cultured in normal or osteogenic medium. GF were able to attach and proliferate on N-dECM and OM-dECM. Both dECM enhanced mineralization of GF at day 14 compared to tissue culture plate (TCP). In addition, OM-dECM promoted higher mineralization of GF than N-dECM although cultured in growth medium.

Conclusions: ECM derived from DPSCs proved to be osteoinductive, and this knowledge supported cell-derived ECM can be further utilized for tissue engineering of mineralized tissues.

Future of Decellularized Dental Pulp Matrix in Regenerative Endodontics

With the advancements in tissue engineering, the repair and regeneration of oral/dental tissue are becoming possible and productive. Due to periodontal diseases, the tooth loses bone support resulting in tooth loss, but bone grafting stabilizes with new bone. It is seen that due to the progression of dental caries, pulp damage happens, and the vitality of the tooth is compromised. The current theme of dental pulp regeneration through biological and synthetic scaffolds, is becoming a potential therapy for pulp revitalization.

Patient centered outcomes among a cohort receiving regenerative endodontic procedures or apexification treatments

INTRODUCTION

This multi-centered cohort study evaluated factors associated with patient-centered outcomes of immature permanent teeth that received regenerative endodontic procedures (REPs) or apexification treatment (APEX).

METHODS

A record review identified teeth treated with REPs or APEX between September 2005-December 2014. Data regarding treatment and patient-centered outcomes were extracted from records with a 3-month minimum recall. When possible, participants presented for an in-person prospective research visit. Patient-centered success was defined as an asymptomatic, functional tooth, not requiring further endodontic or surgical intervention following completion of the original treatment during the study observation. Risk ratios and adjusted and unadjusted Cox proportional hazard ratios were calculated.

RESULTS

The analytic cohort of 187 individuals included 211 teeth (93 REPs; 118 APEX) with an average follow-up of 32 months. Most cases were successful (81% REPs; 92% APEX) and survived the observation period (96% REPs; 97% APEX). The success rate of REPs was lower than APEX and decreased more rapidly over time. Cox regression analysis demonstrated that when controlling for other variables, the association between treatment type and outcome is not significant. Preoperative infection, teeth with more immature roots, and REPs treatment are potentially important predictors. Among teeth receiving REPs, a lower failure rate was observed for teeth that received multi-antibiotic paste (3/43) compared to calcium hydroxide (11/45).

CONCLUSIONS

Teeth receiving REPs required clinical intervention earlier than teeth that received APEX treatment, although preoperative abscess and more immature root also affected this outcome. Using multi-antibiotic paste versus calcium hydroxide in REPs may improve success.

Potential of Bone-Marrow-Derived Mesenchymal Stem Cells for Maxillofacial and Periodontal Regeneration: A Narrative Review

Bone-marrow-derived mesenchymal stem cells (BM-MSCs) are one of the most widely studied postnatal stem cell populations and are considered to utilize more frequently in cell-based therapy and cancer. These types of stem cells can undergo multilineage differentiation including blood cells, cardiac cells, and osteogenic cells differentiation, thus providing an alternative source of mesenchymal stem cells (MSCs) for tissue engineering and personalized medicine. Despite the ability to reprogram human adult somatic cells to induced pluripotent stem cells (iPSCs) in culture which provided a great opportunity and opened the new door for establishing the in vitro disease modeling and generating an unlimited source for cell base therapy, using MSCs for regeneration purposes still have a great chance to cure diseases. In this review, we discuss the important issues in MSCs biology including the origin and functions of MSCs and their application for craniofacial and periodontal tissue regeneration, discuss the potential and clinical applications of this type of stem cells in differentiation to maxillofacial bone and cartilage in vitro, and address important future hopes and challenges in this field.

Scaffolds in Periodontal Regenerative Treatment

Successful periodontal regeneration requires the hierarchical reorganization of multiple tissues including periodontal ligament, cementum, alveolar bone, and gingiva. The limitation of conventional regenerative therapies has been attracting research interest in tissue engineering-based periodontal therapies where progenitor cells, scaffolds, and bioactive molecules are delivered. Scaffolds offer not only structural support but also provide geometrical clue to guide cell fate. Additionally, functionalization improves bioactive properties to the scaffold. Various scaffold designs have been proposed for periodontal regeneration. These include the fabrication of biomimetic periodontal extracellular matrix, multiphasic scaffolds with tissue-specific layers, and personalized 3D printed scaffolds. This review summarizes the basic concept as well as the recent advancement of scaffold designing and fabrication for periodontal regeneration and provides an insight of future clinical translation.

Bioactivity effects of extracellular matrix proteins on apical papilla cells

Potent signaling agents stimulate and guide pulp tissue regeneration, especially in endodontic treatment of teeth with incomplete root formation.

In Vivo Evaluation of Decellularized Human Tooth Scaffold for Dental Tissue Regeneration

Conventional root canal treatment may result in loss of tooth vitality, which can lead to unfavorable treatment outcomes. Notably, a ceased tooth development of immature permanent teeth with open apices, regeneration of periodontal ligaments (PDL), and pulp is highly expected healing process. For regeneration, the scaffold is one of the critical components that carry biological benefits. Therefore, this study evaluated a decellularized human tooth as a scaffold for the PDL and pulp tissue regeneration. A tooth scaffold was fabricated using an effective decellularization method as reported in previous studies. PDL stem cells (PDLSCs) and dental pulp stem cells (DPSCs) obtained from human permanent teeth were inoculated onto decellularized scaffolds, then cultured to transplant into immunosuppressed mouse. After 9 weeks, PDLSCs and DPSCs that were inoculated onto decellularized tooth scaffolds and cultured in an in vivo demonstrated successful differentiation. In PDLSCs, a regeneration of the cementum/PDL complex could be expected. In DPSCs, the expression of genes related to revascularization and the hard tissue regeneration showed the possibility of pulp regeneration. This study suggested that the potential possible application of decellularized human tooth could be a scaffold in regeneration PDL and pulp tissue along with PDLSCs and DPSCs, respectively, as a novel treatment method.

Oral Cavity as a Source of Mesenchymal Stem Cells Useful for Regenerative Medicine in Dentistry

The use of mesenchymal stem cells (MSCs) for regenerative purposes has become common in a large variety of diseases. In the dental and maxillofacial field, there are emerging clinical needs that could benefit from MSC-based therapeutic approaches. Even though MSCs can be isolated from different tissues, such as bone marrow, adipose tissue, etc., and are known for their multilineage differentiation, their different anatomical origin can affect the capability to differentiate into a specific tissue. For instance, MSCs isolated from the oral cavity might be more effective than adipose-derived stem cells (ASCs) for the treatment of dental defects. Indeed, in the oral cavity, there are different sources of MSCs that have been individually proposed as promising candidates for tissue engineering protocols. The therapeutic strategy based on MSCs can be direct, by using cells as components of the tissue to be regenerated, or indirect, aimed at delivering local growth factors, cytokines, and chemokines produced by the MSCs. Here, the authors outline the major sources of mesenchymal stem cells attainable from the oral cavity and discuss their possible usage in some of the most compelling therapeutic frontiers, such as periodontal disease and dental pulp regeneration.

Functional Dental Pulp Regeneration: Basic Research and Clinical Translation

Pulpal and periapical diseases account for a large proportion of dental visits, the current treatments for which are root canal therapy (RCT) and pulp revascularisation. Despite the clinical signs of full recovery and histological reconstruction, true regeneration of pulp tissues is still far from being achieved. The goal of regenerative endodontics is to promote normal pulp function recovery in inflamed or necrotic teeth that would result in true regeneration of the pulpodentinal complex. Recently, rapid progress has been made related to tissue engineering-mediated pulp regeneration, which combines stem cells, biomaterials, and growth factors. Since the successful isolation and characterisation of dental pulp stem cells (DPSCs) and other applicable dental mesenchymal stem cells, basic research and preclinical exploration of stem cell-mediated functional pulp regeneration via cell transplantation and cell homing have received considerably more attention. Some of this effort has translated into clinical therapeutic applications, bringing a ground-breaking revolution and a new perspective to the endodontic field. In this article, we retrospectively examined the current treatment status and clinical goals of pulpal and periapical diseases and scrutinized biological studies of functional pulp regeneration with a focus on DPSCs, biomaterials, and growth factors. Then, we reviewed preclinical experiments based on various animal models and research strategies. Finally, we summarised the current challenges encountered in preclinical or clinical regenerative applications and suggested promising solutions to address these challenges to guide tissue engineering-mediated clinical translation in the future.

Insensitivity of dental pulp stem cells migration to substrate stiffness

Dental pulp stem cells (DPSCs) are a promising cell source for regeneration of dental pulp. Migration is a key event but influence of the microenvironment rigidity (5 kPa at the center of dental pulp to 20 GPa for the dentin) is largely unknown. Mechanical signals are transmitted from the extracellular matrix to the cytoskeleton, to the nuclei, and to the chromatin, potentially regulating gene expression. To identify the microenvironmental influence on migration, we analyzed motility on PDMS substrates with stiffness increasing from 1.5 kPa up to 2.5 MPa. We found that migration speed slightly increases as substrate stiffness decreases in correlation with decreasing focal adhesion size. Motility is relatively insensitive to substrate stiffness, even on a bi-rigidity PDMS substrate where DPSCs migrate without preferential direction. Migration is independent of both myosin II activity and YAP translocation after myosin II inhibition. Additionally, inhibition of Arp2/3 complex leads to significant speed decrease for all rigidities, suggesting contribution of the lamellipodia in the migration. Interestingly, the chromatin architecture remains stable after a 7-days exposure on the PDMS substrates for all rigidity. To design scaffold mimicking dental pulp environment, similar DPSCs migration for all rigidity, leaves field open to choose this mechanical parameter.

Hard Dental Tissues Regeneration-Approaches and Challenges

With the development of the modern concept of tissue engineering approach and the discovery of the potential of stem cells in dentistry, the regeneration of hard dental tissues has become a reality and a priority of modern dentistry. The present review reports the recent advances on stem-cell based regeneration strategies for hard dental tissues and analyze the feasibility of stem cells and of growth factors in scaffolds-based or scaffold-free approaches in inducing the regeneration of either the whole tooth or only of its component structures.

Investigating the vascularization capacity of a decellularized dental pulp matrix seeded with human dental pulp stem cells: in vitro and preliminary in vivo evaluations

AIM

To investigate the vascularization capacity of a decellularized dental pulp matrix (DDP) of bovine origin seeded with human dental pulp stem cells (hDPSCs) in vitro and to present preliminary in vivo findings.

METHODOLOGY

Bovine dental pulps were decellularized and then analysed using histological staining and DNA quantification. The resultant DDPs were characterized using immunohistochemical staining for the retention of vascular endothelial growth factor A (VEGF-A) and fibroblast growth factor 2 (FGF-2). Furthermore, DDPs were recellularized with hDPSCs and analysed histologically. The expression of markers involved in angiogenesis by hDPSCs colonizing the DDPs was assessed in vitro. A preliminary in vivo study was then conducted in which hDPSCs-seeded and unseeded DDPs were inserted in debrided human premolars root slices and implanted subcutaneously in immunodeficient mice. Samples were retrieved after 30 days and analysed using histological and immunohistochemical staining. The independent samples t-test, analysis of variance and a Kruskal-Wallis test were used to analyse the quantitative data statistically depending on the group numbers and normality of data distribution. The difference between the groups was considered significant when the P-value was less than 0.05.

RESULTS

Acellular dental pulp matrices were generated following bovine dental pulp decellularization. Evaluation of the developed DDPs revealed a significant DNA reduction (P < 0.0001) with preservation of the native histoarchitecture and vasculature and retention of VEGF-A and FGF-2. Upon recellularization of the DDPs with hDPSCs, the in vitro analyses revealed cell engraftment with progressive repopulation of DDPs' matrices and vasculature and with enhanced expression of markers involved in angiogenesis. In vivo implantation of root slices with hDPSCs-seeded DDPs revealed apparent vascularization enhancement as compared to the unseeded DDP group (P < 0.0001).

CONCLUSIONS

The developed decellularized dental pulp matrix had pro-angiogenic properties characterized by the retention of native vasculature and angiogenic growth factors. Seeding of hDPSCs into the DDP led to progressive repopulation of the vasculature, enhanced expression of markers involved in angiogenesis in hDPSCs and improved in vivo vascularization capacity. The se suggest that a combination of DDP and hDPSCs have the potential to provide a promising vascularization promoting strategy for dental pulp regeneration.

Which experimental models and explorations to use in regenerative endodontics? A comprehensive review on standard practices

Since the discovery of dental pulp stem cells, a lot of teams have expressed an interest in dental pulp regeneration. Many approaches, experimental models and biological explorations have been developed, each including the use of stem cells and scaffolds with the final goal being clinical application in humans. In this review, the authors' objective was to compare the experimental models and strategies used for the development of biomaterials for tissue engineering of dental pulp with stem cells. Electronic queries were conducted on PubMed using the following terms: pulp regeneration, scaffold, stem cells, tissue engineering and biomaterial. The extracted data included the following information: the strategy envisaged, the type of stem cells, the experimental models, the exploration or analysis methods, the cytotoxicity or viability or proliferation cellular tests, the tests of scaffold antibacterial properties and take into account the vascularization of the regenerated dental pulp. From the 71 selected articles, 59% focused on the "cell-transplantation" strategy, 82% used in vitro experimentation, 58% in vivo animal models and only one described an in vivo in situ human clinical study. 87% used dental pulp stem cells. A majority of the studies reported histology (75%) and immunohistochemistry explorations (66%). 73% mentioned the use of cytotoxicity, proliferation or viability tests. 48% took vascularization into account but only 6% studied the antibacterial properties of the scaffolds. This article gives an overview of the methods used to regenerate dental pulp from stem cells and should help researchers create the best development strategies for research in this field.

Scaffold-based developmental tissue engineering strategies for ectodermal organ regeneration

Tissue engineering (TE) is a multidisciplinary research field aiming at the regeneration, restoration, or replacement of damaged tissues and organs. Classical TE approaches combine scaffolds, cells and soluble factors to fabricate constructs mimicking the native tissue to be regenerated. However, to date, limited success in clinical translations has been achieved by classical TE approaches, because of the lack of satisfactory biomorphological and biofunctional features of the obtained constructs. Developmental TE has emerged as a novel TE paradigm to obtain tissues and organs with correct biomorphology and biofunctionality by mimicking the morphogenetic processes leading to the tissue/organ generation in the embryo. Ectodermal appendages, for instance, develop in vivo by sequential interactions between epithelium and mesenchyme, in a process known as secondary induction. A fine artificial replication of these complex interactions can potentially lead to the fabrication of the tissues/organs to be regenerated. Successful developmental TE applications have been reported, in vitro and in vivo, for ectodermal appendages such as teeth, hair follicles and glands. Developmental TE strategies require an accurate selection of cell sources, scaffolds and cell culture configurations to allow for the correct replication of the in vivo morphogenetic cues. Herein, we describe and discuss the emergence of this TE paradigm by reviewing the achievements obtained so far in developmental TE 3D scaffolds for teeth, hair follicles, and salivary and lacrimal glands, with particular focus on the selection of biomaterials and cell culture configurations.

Angiogenesis in Regenerative Dentistry: Are We Far Enough for Therapy?

Angiogenesis is a broad spread term of high interest in regenerative medicine and tissue engineering including the dental field. In the last two decades, researchers worldwide struggled to find the best ways to accelerate healing, stimulate soft, and hard tissue remodeling. Stem cells, growth factors, pathways, signals, receptors, genetics are just a few words that describe this area in medicine. Dental implants, bone and soft tissue regeneration using autologous grafts, or xenografts, allografts, their integration and acceptance rely on their material properties. However, the host response, through its vascularization, plays a significant role. The present paper aims to analyze and organize the latest information about the available dental stem cells, the types of growth factors with pro-angiogenic effect and the possible therapeutic effect of enhanced angiogenesis in regenerative dentistry.

Decellularized pulp matrix as scaffold for mesenchymal stem cell mediated bone regeneration

Scaffolds that are used for bone repair should provide an adequate environment for biomineralization by mesenchymal stem cells (MSCs). Recently, decellularized pulp matrices (DPM) have been utilized in endodontics for their high regenerative potential. Inspired by the dystrophic calcification on the pulp matrix known as pulp stone, we developed acellular pulp bioscaffolds and examined their potential in facilitating MSCs mineralization for bone defect repair. Pulp was decellularized, then retention of its structural integrity was confirmed by histological, mechanical, and biochemical evaluations. MSCs were seeded and proliferation, osteogenic gene expression, and biomineralization were assessed to verify DPM's osteogenic effects in vitro. MicroCT, energy-dispersive X-ray (EDX), and histological analyses were used to confirm that DPM seeded with MSCs result in greater mineralization on rat critical-sized defects than that without MSCs. Overall, our study proves DPM's potential to serve as a scaffolding material for MSC-mediated bone regeneration for future craniofacial bone tissue engineering.

Ex-vivo recellularisation and stem cell differentiation of a decellularised rat dental pulp matrix

Implementing the principles of tissue engineering within the clinical management of non-vital immature permanent teeth is of clinical interest. However, the ideal scaffold remains elusive. The aim of this work was to assess the feasibility of decellularising rat dental pulp tissue and evaluate the ability of such scaffold to support stem cell repopulation. Rat dental pulps were retrieved and divided into control and decellularised groups. The decellularisation protocol incorporated a low detergent concentration and hypotonic buffers. After decellularisation, the scaffolds were characterised histologically, immunohistochemistry and the residual DNA content quantified. Surface topography was also viewed under scanning electron microscopy. Biocompatibility was evaluated using cytotoxicity assays utilising L-929 cell line. Decellularised scaffolds were recellularised with human dental pulp stem cells up to 14 days in vitro. Cellular viability was assessed using LIVE/DEAD stain kit and the recellularised scaffolds were further assessed histologically and immunolabelled using makers for odontoblastic differentiation, cytoskeleton components and growth factors. Analysis of the decellularised scaffolds revealed an acellular matrix with histological preservation of structural components. Decellularised scaffolds were biocompatible and able to support stem cell survival following recellularisation. Immunolabelling of the recellularised scaffolds demonstrated positive cellular expression against the tested markers in culture. This study has demonstrated the feasibility of developing a biocompatible decellularised dental pulp scaffold, which is able to support dental pulp stem cell repopulation. Clinically, decellularised pulp tissue could possibly be a suitable scaffold for use within regenerative (reparative) endodontic techniques.

Endodontic regeneration: hard shell, soft core

A loss of organs or the destruction of tissue leaves wounds to which organisms and living things react differently. Their response depends on the extent of damage, the functional impairment and the biological potential of the organism. Some can completely regenerate lost body parts or tissues, whereas others react by forming scars in the sense of a tissue repair. Overall, the regenerative capacities of the human body are limited and only a few tissues are fully restored when injured. Dental tissues may suffer severe damage due to various influences such as caries or trauma; however, dental care aims at preserving unharmed structures and, thus, the functionality of the teeth. The dentin-pulp complex, a vital compound tissue that is enclosed by enamel, holds many important functions and is particularly worth protecting. It reacts physiologically to deleterious impacts with an interplay of regenerative and reparative processes to ensure its functionality and facilitate healing. While there were initially no biological treatment options available for the irreversible destruction of dentin or pulp, many promising approaches for endodontic regeneration based on the principles of tissue engineering have been developed in recent years. This review describes the regenerative and reparative processes of the dentin-pulp complex as well as the morphological criteria of possible healing results. Furthermore, it summarizes the current knowledge on tissue engineering of dentin and pulp, and potential future developments in this thriving field.

Optimizing Methods for Bovine Dental Pulp Decellularization

INTRODUCTION

This study aimed to characterize the decellularization effects of different treatment protocols on the bovine dental pulp extracellular matrix (ECM) for tissue regeneration.

METHODS

Seven different decellularization protocols consisting of trypsin/EDTA (for 1 hour, 24 hours, or 48 hours), sodium dodecyl sulfate (SDS, for 24 hours or 48 hours), Triton X-100 (for 1 hour), and deoxyribonuclease treatments were tested on bovine dental pulp tissue. The posttreatment samples were evaluated for remaining DNA and cellular contents, structural durability, immunofluorescence analysis, and in vivo immune responses.

RESULTS

A complete decellularization process in all of the experimental groups was observed. The protocol that included 1 hour of Triton X-100 treatment and 12 hours of trypsin/EDTA treatment with no SDS treatment (P7 [12E-0S-1T]) showed the highest retention of glycosaminoglycan and the absence of nuclei in 4,6-diamidino-2-phenylindole. All groups showed significantly lower DNA content compared with native pulp tissue (P < .05), whereas compared with other protocols, protocols 1 (1 hour of EDTA/trypsin, 24 hours of SDS, and 1 hour of Triton X-100) and 4 (1 hour of EDTA/Trypsin, 48 hours of SDS, and no Triton X-100) resulted in the highest DNA contents (P < .05). Based on these results, P7 was further evaluated by immunofluorescence and in vivo immunogenicity. P7 specimens preserved collagen type I, whereas mononuclear cell infiltration along with neovascularization was observed in vivo.

CONCLUSIONS

All tested treatments displayed the potential ability to decellularize pulp tissue and are viable options for a xenogeneic dental pulp ECM scaffold. The P7 (12E-0S-1T) protocol resulted in decellularized ECM with minimal organic matrix/ultrastructural detriments and an acceptable host immune response.

Osteogenic Potential of Decellularized Tooth Matrix

We studied the possibility of using decellularized tooth matrix as a scaffold to restore bone tissue. It was found that mesenchymal stem cells underwent spontaneous osteogenic differentiation on the decellularized tooth matrix, which makes it possible to use it as a natural allograft in the treatment of resorption of alveolar bone tissue.

RGD- and VEGF-Mimetic Peptide Epitope-Functionalized Self-Assembling Peptide Hydrogels Promote Dentin-Pulp Complex Regeneration

INTRODUCTION

Cell-based tissue engineering is a promising method for dentin-pulp complex (DPC) regeneration. The challenges associated with DPC regeneration include the generation of a suitable microenvironment that facilitates the complete odontogenic differentiation of dental pulp stem cells (DPSCs) and the rapid induction of angiogenesis. Thus, the survival and subsequent differentiation of DPSCs are limited. Extracellular matrix (ECM)-like biomimetic hydrogels composed of self-assembling peptides (SAPs) were developed to provide an appropriate microenvironment for DPSCs. For functional DPC regeneration, the most important considerations are to provide an environment that promotes the adequate attachment of DPSCs and rapid vascularization of the regenerating pulp. Morphogenic signals in the form of growth factors (GFs) have been incorporated into SAPs to promote productive DPSC behaviors. However, the use of GFs has several drawbacks. We envision using a scaffold with SAPs coupled with long-term factors to increase DPSC attachment and vascularization as a method to address this challenge.

METHODS

In this study, we developed synthetic material for an SAP-based scaffold with RGD- and vascular endothelial growth factor (VEGF)-mimetic peptide epitopes with the dual functions of dentin and pulp regeneration. DPSCs and human umbilical vein endothelial cells (HUVECs) were used to evaluate the biological effects of SAP-based scaffolds. Furthermore, the pulpotomized molar rat model was employed to test the reparative and regenerative effects of SAP-based scaffolds.

RESULTS

This scaffold simultaneously presented RGD- and VEGF-mimetic peptide epitopes and provided a 3D microenvironment for DPSCs. DPSCs grown on this composite scaffold exhibited significantly improved survival and angiogenic and odontogenic differentiation in the multifunctionalized group in vitro. Histological and functional evaluations of a partially pulpotomized rat model revealed that the multifunctionalized scaffold was superior to other options with respect to stimulating pulp recovery and dentin regeneration in vivo.

CONCLUSION

Based on our data obtained with the functionalized SAP scaffold, a 3D microenvironment that supports stem cell adhesion and angiogenesis was generated that has great potential for dental pulp tissue engineering and regeneration.