The comparative sensitivity of intra-oral, in vitro, and animal models in the 'profile' evaluation of topical fluorides

Cyclodextrin and TiF4 Nanocomplex on Enamel Demineralization

The aim of this study was to assess the effect of a newly developed nanocomplex formed of hydroxypropyl-b-cyclodextrin and 1% titanium tetrafluoride (TiF4) after distinct complexation periods (12/72 h) on demineralization of bovine enamel in vitro. Enamel blocks (n=60) were allocated in different groups: Mili-Q water, hydroxypropyl-b-cyclodextrin, 1% TiF4, hydroxypropyl-b-cyclodextrin + 1% TiF4 after 12 h of complexation and hydroxypropyl-b-cyclodextrin + 1% TiF4 after 72 h of complexation. The samples were evaluated by surface microhardness, cross-sectional microhardness and micro-CT. Scanning electron microscopy and energy dispersive X-ray spectrometry (SEM/EDX) were also obtained. Hydroxypropyl-b-cyclodextrin + 1% TiF4 after 12 h complexation resulted in lower percentage of surface microhardness loss compared to Mili-Q water, hydroxypropyl-b-cyclodextrin, 1% TiF4 and hydroxypropyl-b-cyclodextrin + 1% TiF4 after 72 h of complexation group, with a large effect size (from 1.307 to 2.943) and high power (84.9 to 99%). All groups resulted in similar integrated mineral loss (ΔZ) obtained by both internal microhardness and micro-CT techniques. Enamel treated with TiF4 and TiF4 + hydroxypropyl-b-cyclodextrin groups showed a TiO2 glaze-layer, while EDX evaluation identified Ti. The solution containing the inclusion complex of hydroxypropyl-b-cyclodextrin + TiF4 with 12 h of complexation period demonstrated a significant ability to reduce surface demineralization of sound enamel under an artificial cariogenic challenge.

Formation and assessment of enamel subsurface lesions in vitro

The present study compared two pH-cycling models designed to induce subsurface lesions (SLs) with a less demineralized surface layer on teeth, with the aim of developing new technologies for assessment of such lesions by examining the performance of confocal Raman microscopy for detection of white spot lesions (WSLs). Twelve sound premolars were exposed to two sets of model conditions (A, B) designed to induce SLs. Teeth on which white lesions had formed in vivo were used as positive controls. All specimens were inspected using an intraoral camera and Raman microscopy to detect small changes in the appearance and structure of the enamel. Changes in the natural color of the teeth during the treatment were recorded via the camera. Phosphate maps with their spectra were constructed from the phosphate peak at 960 cm^-1. The depth of lesions was measured on the basis of variations in phosphate peak intensity. Protocol B was reliable for reproducing SLs in a relatively short period. Both protocols had intrinsic limitations in not completely simulating the complex intraoral conditions leading to WSL formation with respect to lesion depth and preservation of an intact surface layer. Raman microscopy can be considered the gold standard for analysis of hard tissue mineralization.

An In Vitro Investigation of Anticaries Efficacy of Fluoride Varnishes

Most currently marketed fluoride varnishes (FVs) have not been evaluated for their effectiveness in preventing dental caries. The objective of this study was to investigate the anticaries efficacy, measured as fluoride release into artificial saliva (AS); change in surface microhardness of early enamel caries lesions; and enamel fluoride uptake (EFU) of 14 commercially available FVs and two control groups. Bovine enamel specimens (5×5 mm) were prepared and assigned to 18 groups (n=12). Early caries lesions were created in the specimens and characterized using Vickers microhardness (VHN_lesion). FV was applied to each group of specimens. Immediately afterward, specimens were incubated in 4 mL of AS for 18 hours, which were collected and renewed every hour for the first six hours. AS samples were analyzed for fluoride using an ion-specific electrode. Specimens were then brushed for 20 seconds with toothpaste slurry and subjected to pH cycling consisting of a four-hour/day acid challenge and one-minute treatments with 1100 ppm F dentifrice for five days. Microhardness was measured following pH cycling (VHN_post). EFU was determined using microbiopsy. Acid resistance (eight-hour demin challenge) was performed after pH cycling, and microhardness was measured (VHN_art) and compared with baseline values to test the FV impact after pH cycling. One-way analysis of variance was used for data analysis (α=0.05). FVs differed in their release characteristics (mean ± SD ranged from 14.97 ± 2.38 μg/mL to 0.50 ± 0.15 μg/mL), rehardening capability (mean ± SD ranged from 24.3 ± 15.1 to 11.7 ± 12.7), and ability to deliver fluoride to demineralized lesions (mean ± SD ranged from 3303 ± 789 μg/cm³ to 707 ± 238 μg/cm³). Statistically significant but weak linear associations were found between ΔVHN_{(post - lesion)}, EFU, and fluoride release (correlations 0.21-0.36). The results of this study demonstrated that differences in FV composition can affect their efficacy in in vitro conditions.

Carious lesion remineralizing potential of fluoride- and calcium-containing toothpastes: A laboratory study

BACKGROUND

The authors conducted a laboratory study to determine the carious lesion remineralization and fluoridation potential of fluoride (F)- and calcium-containing toothpastes.

METHODS

The authors created early carious lesions in bovine enamel specimens and assigned them to 7 treatment groups on the basis of their surface Vickers microhardness: Clinpro Tooth Crème (Clinpro) (3M ESPE), CTx4 Gel 1100 (CTx4) (Oral Biotech), Enamelon Fluoride Toothpaste (Enamelon) (Premier Dental), MI Paste ONE (MI-One) (GC America), Crest Cavity Protection Toothpaste (Crest) (Procter & Gamble), and 2 F-dose controls (low F, high F). The authors pH cycled the specimens for 10 days by using an established model, determined changes in surface microhardness, calculated percentage of surface microhardness recovery (%SMHr; primary outcome variable), and measured enamel F uptake (EFU). The authors used a 1-way analysis of variance for data analysis.

RESULTS

Study results showed an F-dose response for both %SMHr (low-F control: mean, 9.8; 95% confidence interval [CI], 5.7 to 13.8); Crest: mean, 26.2; CI, 21.8 to 30.6; high-F control: mean, 33.5; CI, 29.4 to 37.5) and EFU (low-F control: mean, 47; CI, 12 to 83; Crest: mean, 225; CI, 189 to 260; high-F control: mean, 307; CI, 271 to 342; all micrograms of F per cubic centimeter). For %SMHr, Clinpro (mean, 26.5; CI, 22.5 to 30.6) and CTx4 (mean, 27.3; CI, 23.1 to 31.5) were similar to Crest, all being superior to Enamelon (mean, 15.6; CI, 11.6 to 19.7), which was superior to MI-One (mean, 4.3; CI, 0.3 to 8.3). For EFU, there were no differences between Clinpro (mean, 189; CI, 153 to 224), CTx4 (mean, 177; CI, 142 to 213), Enamelon (mean, 196; CI, 161 to 232), and Crest, all being superior to MI-One (mean, 66; CI, 30 to 102).

CONCLUSIONS

This study's results failed to show superior remineralizing efficacy of any of the toothpastes compared with those of a calcium-free F toothpaste, with 2 of the 4 toothpastes being inferior. Clinical testing will be required to establish conclusive evidence.

PRACTICAL IMPLICATIONS

Clinicians should be aware of the remineralizing potential of new anticaries products.

Protocols to Study Dental Caries In Vitro: pH Cycling Models

As laboratory models are bridges to in vivo caries studies, they must mirror clinical conditions, where demineralization and remineralization alternate constantly (i.e., pH cycling) and are only interrupted during the very short period of application of investigational products, such as toothpaste or mouth rinse. In view of this, models have been developed, based on pH cycling, to study the anticaries or caries remineralizing effects of substances. The pH cycling models have long been accepted and utilized by the scientific community and the toothpaste industry as an appropriate alternative to animal caries testing, particularly for ionic fluoride-based dentifrices. Several pH cycling models have been developed and described in the literature over the years. However, in this chapter, we crudely categorize them into two types: according to what the investigational product is tailored to achieve, i.e., prevention of caries development (net demineralization) or remineralization of early caries (net remineralization). Thus the models are termed "demineralization" or "remineralization" models and are described in details here together with their disadvantages and applications.

A Review of the Common Models Used in Mechanistic Studies on Demineralization-Remineralization for Cariology Research

Mechanistic studies on demineralization-remineralization play a critical role in investigating caries pathogenicity, testing effects of new caries prevention methods, and developing new caries-preventing products. Simulating the cariogenic challenges in the mouth, various demineralization-remineralization models have been used for cariology research. This review aimed to provide an overview of the common mechanistic studies on demineralization-remineralization for cariology research in recent literature. Most mechanistic studies were in vitro studies (n = 294, 84%) among the 350 cariology studies indexed in the Web of Science from 2014 to 2016. Among these in vitro studies, most studies (257/294, 87%) used chemical models that could be classified as simple mineralization models (159/257, 62%) or pH-cycling models (98/257, 38%). In vitro studies consumed less expense and time than in vivo studies. Furthermore, in vitro conditions were easier to control. However, they could hardly imitate the complex structures of oral cavities, the microbiological effect of oral biofilm, and the hydrodynamic instability of saliva. The advantages of chemical models included simplicity of the study, low cost, efficiency (time saving), reproducibility, and stability of experiments. However, the “caries” generated were not biological. Moreover, the chemical models were generally basic and could not mimic a carious lesion in the complex oral environment.

The Role of Microbiology in Models of Dental Caries: Reaction Paper

Models of the caries process have made significant contributions toward defining the roles of bacteria in caries. Microbiologists use a variety of in vitro systems to model aspects of the caries process. Also, in situ models in humans provide information on the microbiology of caries in vivo. These models do not involve the entire process leading to natural caries; consequently, the results from such studies are used to deduce the roles of bacteria in natural caries. Therefore, they can be described as Inferential Caries Models. In contrast, animal models and some clinical trials in humans involve natural caries and can be described as Complete Caries Models. Furthermore, these models are used in two distinct ways. They can be used as Exploratory Models to explore different aspects of the caries process, or as Test Models to determine the effects of anticaries agents. This dichotomy in approach to the use of caries models results in modification of the models to suit a particular role. For example, if we consider Exploratory Models, the in situ appliance in humans is superior to others for analyzing the microbiology of plaque development and demineralization in vivo. The chemostat and biofilm models are excellent for exploring factors influencing bacterial interactions. Both models can also be used as Test Models. The in situ model has been used to test the effects of fluoride on the microflora and demineralization, while the chemostat and biofilm models allow for the testing of antibacterial agents. Each model has its advantages and disadvantages and role in analysis of the caries process. Selection of the model depends on the scientific question posed and the limitations imposed by the conditions available for the study.

Investigation of Factors Influencing Stain Formation Utilizing an in Situ Model

In order to understand the factors of extrinsic stain formation more fully, we have developed an in situ stain model. This consists of polished bovine enamel blocks attached to partial or full dentures worn by adult volunteers for 24 h per day. The dentures were cleaned twice daily with a commercial dentifrice and toothbrush, with care taken to avoid brushing the inserts. A Minolta CR321 Chroma Meter in the L*a*b* mode was used for taking reflectance measurements of the stain formed on the enamel inserts. From these values, changes in the color of the inserts were calculated and the level of stain determined. In general, the stain formed on the enamel inserts was yellow and increased in intensity and darkness with time. The enamel inserts with the largest stain increases were from smokers rather than non-smokers. No correlation was observed between amount of stain and quantity of tea and coffee consumed. When the effects of surface roughness on in situ stain formation were considered, the major variable in this study was found to be the location of the enamel insert in the denture rather than the surface roughness.

Statistical Considerations in Caries Models: Reaction Paper

In his conference presentation, Proskin discussed the concepts of validity and reliability of caries models, and reviewed the Proskin-Chilton-Kingman procedure for using models to assess the clinical efficacy of a therapeutic agent. He presented a generally positive view of caries models as substitutes for clinical studies under certain conditions. In this reaction paper I propose a stronger definition of validity, and discuss conceptual and practical requirements that caries models must meet before they can be used in place of clinical studies. Meeting these requirements may depend on obtaining new clinical data; making greater use of existing clinical data; and a willingness to adopt a limited set of standardized models for demonstrating clinical efficacy.

Animal Caries Models: Reaction Paper

All caries models, including animal models, must demonstrate validity, which is the ability to assess the caries process as it relates to humans. One aspect in assessing validity is the establishment of fluoride dose response. A review of the literature regarding dose response from topical fluorides in rat caries models has indicated that validity has already been shown for fluoride in dentifrices and for fluoride in food and water.

Therefore, investing future time and effort in the rat caries model is justified and warranted. Specific areas to be addressed include: performance of thorough literature searches and data analysis, standardization of the model, synchronization of caries measurements, development of a summary "caries value", determination of a human caries "equivalence factor", and determination of best treatment conditions.

Comparative Evaluation of Remineralizing Potential of Three Pediatric Dentifrices

Introduction

Dentifrices are available in different formulations and more commonly a single dentifrice is used by whole family; be it an adult or child. However, concerns over high fluoride in pediatric formulations coupled with inability of the children to spit have led to recommendations to minimize fluoride ingestion during toothbrushing by using a small amount of toothpaste by children and incorporating minimal quantity of fluoride in the toothpastes. Literature is scarce on the remineralization potential of popularly known Indian pediatric dentifrices; hence, pediatric dentifrices containing lesser concentration of fluoride have been marketed relatively recently for the benefit of children without posing a threat of chronic fluoride toxicity at the same time.

Aim and objectives

The present study was undertaken to evaluate and compare the remineralization potential of three commercially available Indian pediatric dentifrices with different compositions on artificially induced carious lesions in vitro through scanning electron microscopy (SEM).

Materials and methods

The present in vitro study was conducted on 45 sound extracted primary molar surfaces divided into three groups (15 each). Artificial demineralization was carried out, followed by remineralization using dentifrice slurry as per the group allocation. All the samples were studied for remineralization using SEM and the results statistically compared.

Results

All three dentifrices tested showed remineralization; although insignificantly different from each other but significantly higher compared to the demineralizing surface.

Conclusion

One can use pediatric dentifrices for preventing dental caries and decelerating lesion progression with an added advantage of lower fluoride toxicity risk.

How to cite this article

Kapoor A, Indushekar KR, Saraf BG, Sheoran N, Sardana D. Comparative Evaluation of Remineralizing Potential of Three Pediatric Dentifrices. Int J Clin Pediatr Dent 2016;9(3):186-191.

The effects of fruit smoothies on enamel erosion

OBJECTIVES

This prospective, randomised in vitro study was to investigate the pH and titratable acidity of fruit smoothie drinks and to assess the effect of these drinks on enamel erosion.

METHOD

Fifty enamel slabs were divided into five groups which were allocated to the sample solutions groups: Innocent(®) smoothie strawberries and bananas (SB), Innocent(®) smoothie mangoes and passion fruit (MP) and Diet Coke. Distilled deionised water (DD) was used as negative control and citric acid 0.3% as positive control. All the slabs were subjected to a 21-day pH cycling regime involving 2 min of immersions, five times a day with appropriate remineralization periods in between. Measurement of surface loss was assessed using profilometry. Independent sample t tests were used to compare mean.

RESULTS

The titratable acidity for both test smoothies were 3.5-4 times more than that needed to neutralise Diet Coke and citric acid 0.3%. The pH of SB, MP smoothie and Diet Coke was found to be 3.73, 3.59 and 2.95, respectively. MP smoothie caused the greatest amount of surface loss followed by Diet Coke. Both smoothies were found to cause significant surface loss. MP smoothie resulted in significantly higher surface loss compared with MB smoothie and citric acid 3 %.

CONCLUSION

The smoothies tested were acidic and had high titratable acidity. They produced a significant erosion of enamel in vitro. The results of this study suggest that there should be increased awareness of the erosive effects of smoothies especially as their consumption seems to be on the increase.

Fluoride plus functionalized β-TCP: a promising combination for robust remineralization

With more than 50 years of clinical success, fluoride serves as the gold standard agent for preventing tooth decay. In particular, the action of fluoride facilitates saliva-driven remineralization of demineralized enamel and alters solubility beneficially. Still, tooth decay remains problematic, and one way to address it may be through the development of new mineralizing agents. Laboratory and clinical studies have demonstrated that the combination of fluoride and functionalized β-tricalcium phosphate (fTCP) produces stronger, more acid-resistant mineral relative to fluoride, native β-TCP, or fTCP alone. In contrast to other calcium-based approaches that seem to rely on high levels of calcium and phosphate to drive remineralization, fTCP is a low-dose system designed to fit within existing topical fluoride preparations. The functionalization of β-TCP with organic and/or inorganic molecules provides a barrier that prevents premature fluoride-calcium interactions and aids in mineralization when applied via common preparations and procedures. While additional clinical studies are warranted, supplementing with fTCP to enhance fluoride-based nucleation activity, with subsequent remineralization driven by dietary and salivary calcium and phosphate, appears to be a promising approach.

In situ remineralization of white-spot enamel lesions by 500 and 1,100 ppm F dentifrices

The aim of this study was to evaluate the remineralization potential of three silica-containing NaF dentifrice systems in an intraoral model. Subjects (N = 30) in this randomized, three-phase, 28-day, crossover study served as their own control. Each participant wore a customized orthodontic appliance attached to a mandibular molar and contained one tooth block with caries-like lesion. For each phase, participants engaged in twice-daily brushing for 2 min with one of the following dentifrices: 500 ppm F, 500 ppm F plus functionalized β-tricalcium phosphate (fTCP), and a clinically proven 1,100 ppm F. After each phase, appliances were removed, and specimens were analyzed using surface microhardness (SMH), transverse microradiography (TMR), and cross-sectional microhardness (CSMH). Statistically significant (p < 0.05) remineralization of white-spot lesions relative to baseline occurred for each dentifrice as determined with SMH and TMR. No significant differences (p > 0.05) in SMH were found among the three groups, but trending revealed the 500 ppm F plus fTCP produced 26% and 27% greater SMH recovery relative to 500 and 1,100 ppm F, respectively. Similarly, no significant differences (p > 0.05) in TMR were found among the groups. However, the 500 ppm F plus fTCP dentifrice produced 10% and 38% greater mineral recovery relative to 500 and 1,100 ppm F, respectively, while reducing the lesion depth 30% and 52%, respectively. Significant differences (p < 0.05) in CSMH existed among the three dentifice groups at different enamel depths, but statistical differences (p < 0.05) in relative lesion size were only found between 500 ppm F plus fTCP and 500 ppm F. The combination of fTCP and fluoride in a single-compartment, water-based dentifrice can cooperate with fluoride to produce significant remineralization. These results suggest that the combination of 500 ppm F with fTCP may provide comparable anticaries benefits relative to a 1,100 ppm F dentifrice.

pH-cycling models for in vitro evaluation of the efficacy of fluoridated dentifrices for caries control: strengths and limitations

Despite a plethora of in situ studies and clinical trials evaluating the efficacy of fluoridated dentifrices on caries control, in vitro pH cycling models are still broadly used because they mimic the dynamics of mineral loss and gain involved in caries formation. This paper critically reviews the current literature on existing pH-cycling models for the in vitro evaluation of the efficacy of fluoridated dentifrices for caries control, focusing on their strengths and limitations. A search was undertaken in the MEDLINE electronic journal database using the keywords "pH-cycling", "demineralization", "remineralization", "in vitro", "fluoride", "dentifrice". The primary outcome was the decrease of demineralization or the increase of remineralization as measured by different methods (e.g.: transverse microradiography) or tooth fluoride uptake. Inclusion of studies, data extraction and quality assessment were undertaken independently and in duplicate by two members of the review team. Disagreements were solved by discussion and consensus or by a third party. One hundred and sixteen studies were included, of which 42 addressed specifically the comparison of dentifrices using different pH-cycling models. The other studies included meta-analysis or reviews, data about the effect of different fluoride sources on de-remineralization, different methods for analysis de-remineralization and chemical variables and characteristics of dental hard tissues that might have influence on de-remineralization processes. Generally, the studies presented ability to detect known results established by clinical trials, to demonstrate dose-related responses in the fluoride content of the dentifrices, and to provide repeatability and reproducibility between tests. In order to accomplish these features satisfactorily, it is mandatory to take into account the type of substrate and baseline artificial lesion, as well as the adequate response variables and statistical approaches to be used. This critical review of literature showed that the currently available pH-cycling models are appropriate to detect dose-response and pH-response of fluoride dentifrices, and to evaluate the impact of new active principles on the effect of fluoridated dentifrices, as well as their association with other anti-caries treatments.

Surfactant-modified beta-TCP: structure, properties, and in vitro remineralization of subsurface enamel lesions

A hybrid material comprised of beta-tricalcium phosphate (beta-TCP) and sodium lauryl sulfate (SLS) was prepared using a mechanochemical process, examined using particle size analysis, IR spectroscopy, (31)P, (23)Na, and (13)C solid-state NMR spectroscopy, and calcium dissolution experiments, and probed for in vitro remineralization of subsurface enamel lesions. Our results suggest that while the (31)P environments of beta-TCP remain unchanged during solid-state processing, there is noticeable shifting among the SLS (23)Na and (13)C environments. Therefore, given the structure of beta-TCP, along with our IR examinations and calcium dissolution isotherms, SLS appears to interface strongly with the cation deficient C(3) symmetry site of the beta-TCP hexagonal crystal lattice with probable emphasis placed on the underbonded CaO(3) polyhedra. To demonstrate the utility of the surface-active TCP material in dental applications, we combined the TCP-SLS with 5,000 ppm F (NaF) and evaluated the remineralization potential of subsurface enamel lesions via an in vitro remineralization/demineralization pH cycling dental model. Using surface and longitudinal microhardness measurements, the TCP-SLS plus 5,000 ppm F system was found to significantly boost remineralization of subsurface enamel lesions, with microhardness values increasing up to 30% greater than fluoride alone.

Streptococcus mutans, caries and simulation models

Dental caries and dental plaque are among the most common diseases worldwide, and are caused by a mixture of microorganisms and food debris. Specific types of acid-producing bacteria, especially Streptococcus mutans, colonize the dental surface and cause damage to the hard tooth structure in the presence of fermentable carbohydrates e.g., sucrose and fructose. This paper reviews the link between S. mutans and caries, as well as different simulation models that are available for studying caries. These models offer a valuable approach to study cariogenicity of different substrates as well as colonization of S. mutans.

Preparation, characterization and in vitro efficacy of an acid-modified beta-TCP material for dental hard-tissue remineralization

A blended material composed of beta-tricalcium phosphate (beta-TCP) and fumaric acid (FA) was prepared using a mechanochemical process. The structure and properties of the TCP-FA material was probed using particle size analysis, infrared, (31)P and (13)C solid-state nuclear magnetic resonance (NMR) spectroscopy, powder X-ray diffraction and calcium bioavailability. NMR studies showed that orthophosphate environments within beta-TCP remain largely unaffected in the presence of FA during mechanochemical processing; alternately, (13)C data indicated the carboxylic groups of FA are strongly affected during processing with beta-TCP. X-ray results reveal beta-TCP diffraction plane shifting with lattice contractions likely arising at the C(3) symmetry site. While milled beta-TCP (mTCP) produces a higher flux of bioavailable calcium relative to native beta-TCP, the mechanochemical conditioning of TCP-FA generates more than seven times the level of ionic calcium relative to mTCP. Collectively, the results from these studies indicate FA interfaces with calcium oxide polyhedra of the beta-TCP hexagonal crystal lattice, especially with the underbonded CaO(3) cluster manifested within the C(3) symmetry site of the beta-TCP motif. An in vitro remineralization/demineralization pH cycling dental model was then used to assess the potential of the TCP-FA material in reversing early stage non-cavitated enamel lesions. Characterization of the remineralization via surface and longitudinal microhardness measurements demonstrated that the TCP-FA material provides statistically superior remineralization relative to milled and native beta-TCP.

Effects of dentifrices on artificial caries like lesions: an in vitro pH cycling study

AIM

To evaluate remineralising effects of three dentifrices, Vicco by Vicco Labs, India, Perioe Cavity Care by LG Care, Korea and Colgate Total by Colgate-Palmolive, Thailand on artificial caries like lesions.

DESIGN

In vitro single-section and pH cycling model.

METHODS

Extracted third molars were painted with nail varnish, leaving 1 mm wide windows before placing demineralising solution for 96h to produce artificial carious lesions 150-200 miocrom deep. Teeth were then cut longitudinally into 100-150 microm thick sections and randomly assigned to three groups. Polarised light microscopy and microradiography were used to evaluate lesion depth, before and after the 10 day pH cycle. Sections in Group A were treated with Vicco by Vicco Labs, India (-ve control), Group B were treated with Perioe Cavity Care by LG Care, Korea and Group C were treated with Colgate Total by Colgate-Palmolive, Thailand.

RESULTS

Mean lesion depths in Groups B and C reduced by 7% and 12% respectively, whereas lesion depth increased by 13% in Group A. Comparisons made among groups using ANOVA and Student-Newman-Keuls tests showed that three groups were significantly different from each other (p < 0.05).

CONCLUSIONS

Perioe Cavity Care and Colgate Total remineralised initial carious lesions. However, the remineralising potential of Colgate Total was higher than that of Perioe Cavity Care.

Fluoride Dose Response in pH-Cycling Models Using Bovine Enamel

The aim of this study was to establish methodologies for verification of the fluoride solution dose-response relationship using bovine enamel and pH-cycling models. Six models of the cariogenic challenge were performed, varying the time of demineralization and pH, time of remineralization, composition of de- and remineralization solutions, frequency and time of application of treatment solutions and pH-cycling duration. For the evaluation of the fluoride effect on caries dynamics, two proposed models provided for improvement in standardization of methods leading to a higher level of precision, demonstrating a dose response between treatments with regard to surface microhardness and DeltaZ. For the evaluation of the fluoride effect on enamel remineralization, the addition of fluoride to the de- and remineralization solutions and the reduction of frequency and time of application of fluoride solutions led to a more suitable pH-cycling model.

An in situ model to study the toothpaste abrasion of enamel

OBJECTIVES

In order to understand the clinical relevance of dentifrice abrasivity on the dentition in vivo, an in situ enamel wear model has been developed.

MATERIALS AND METHODS

Polished human enamel blocks were indented with a Knoop diamond, attached to dentures and worn by adult volunteers for 24 h per day. The blocks were brushed for 30 s, twice per day with dentifrices of known relative dentine abrasivity (RDA) and relative enamel abrasivity (REA). The dentifrices used were either dentifrice A (RDA=85, REA=3.4), dentifrice B (RDA=189, REA=2.0) or dentifrice C (RDA=132, REA=42.7). After 28 days, the blocks were removed and the geometry of each Knoop indent was remeasured. From the baseline and post-treatment values of indent length, the amount of enamel wear was calculated from the change in the indent depth.

RESULTS

The median values for enamel wear of dentifrices A, B and C were -0.02, 0.01 and -0.48 microm, respectively. The differences between dentifrice C and dentifrices A and B were of statistical significance.

CONCLUSION

This study has demonstrated the usefulness of an in situ technique for investigating the relationship between the abrasivity of a dentifrice in vitro and the wear of enamel in situ.

The remineralizing effect of an essential oil fluoride mouthrinse in an intraoral caries test

BACKGROUND

The authors conducted a two-week clinical study to determine the remineralizing effect of an experimental mouthrinse containing both fluoride and essential oils in an intraoral caries test model.

METHODS

The study used an observer-blinded, randomized, controlled, 3 x 3 crossover design. The authors enrolled in the study 153 subjects, each of whom had a mandibular removable partial denture. Two partially demineralized human enamel specimens were mounted on each subject's removable partial denture. Subjects used either a fluoride mouthrinse with essential oils (the test mouthrinse), a fluoride nonessential oils mouthrinse (the positive control) or an essential oil nonfluoride mouthrinse (the negative control) twice daily for 14 days. The researchers assessed specimens for mineral content change and fluoride uptake using surface microhardness, or SMH, testing and enamel fluoride analysis, respectively.

RESULTS

Of the 153 subjects enrolled in the study, 125 subjects were evaluable at the study endpoint. The results after two weeks showed that percentage of SMH recovery was 42 percent in the test group, 36 percent in the positive control group and 16 percent in the negative control group. The fluoride uptake was 19 micrograms per square centimeter, 16 microg/cm2 and 3 microg/cm2 for the test mouthrinse, positive control and negative control groups, respectively. In terms of both percentage of SMH and fluoride uptake, the test mouthrinse and positive control mouthrinse were statistically higher than the negative control mouthrinse, and the test mouthrinse was "at least as good as" the positive control mouthrinse.

CONCLUSIONS

This study provides evidence that an essential oil mouthrinse with 100 parts per million fluoride is effective in promoting enamel remineralization and fluoride uptake.

CLINICAL IMPLICATIONS

The combination of fluoride and essential oils in a mouthrinse may provide anticaries efficacy, in addition to essential oils' previously established antigingivitis efficacy.

Caries and plaque inhibition in rats by five topically applied dentifrices

The effectiveness of 5 different brands of dentifrices on caries and plaque were tested in rats in 2 experiments. 10 litters of rats each were infected with Streptococcus sobrinus OMZ-176 and Actinomyces viscosus Ny1. The rats were offered the diet 2000a containing either 40% of sucrose (study I) or 10% of sucrose (study II). The following products were tested topically: (1) H2O, (negative control); (2) chlorhexidine diacetate, (positive control); (3) Parodontax NF; (4) Meridol; (5) Colgate Total; (6) Mentadent C; (7) Dent Xpress. Comparisons with the water control in study I showed that plaque extent was decreased by chlorhexidine diacetate, Dent Xpress and by Mentadent C only. All fluoride-containing dentifrices tested reduced caries. In study II, comparisons with the water control showed that plaque extent was reduced by chlorhexidine diacetate, Parodontax, Meridol, Dent Xpress and by Mentadent C. All dentifrices reduced caries, however, the incidence was low. These 2 studies confirm that fluorides incorporated in dentifrices decrease dental caries in the rat. Differences in the effectiveness of caries inhibition between the 5 dentifrices could not be explained either by the form of fluoride utilized or by the antimicrobials added. Rather, the performance of a given dentifrice depended upon the concerted action of the particular ingredients. It appears that the effect of antiplaque agents should be evaluated in the rat model using a diet containing sucrose at a low level.

The application of in vitro models to research on demineralization and remineralization of the teeth

Progress in in vivo and in situ experimentation has led many researchers to speculate as to the relevance and importance of in vitro testing protocols in caries research. A Medline/Biosis search for the present review revealed well over 300 citations (since 1989) documenting in vitro tests associated with caries research on mineralization and fluoride reactivity. The present survey documents these recent applications of in vitro test methods in both mechanistic and 'profile' caries research. In mechanistic studies, in vitro protocols over the past five years have made possible detailed studies of dynamics occurring in mineral loss and gain from dental tissues and the reaction dynamics associated with fluoride anticaries activity. Similarly, in profile applications, in vitro protocols make possible the inexpensive and rapid--yet sensitive--assessment of F anticaries efficacy within fluoride-active systems, and these tests represent a key component of product activity confirmation. The ability to carry out single variable experiments under highly controlled conditions remains a key advantage in in vitro experimentation, and will likely drive even further utilization, as advances continue in physical-chemical and analytical techniques for substrate analysis in these protocols. Despite their advantages in vitro testing protocols have significant limitations, most particularly related to their inability to simulate the complex biological processes involved in caries.

The role of microbiology in models of dental caries

Models of dental caries (laboratory, animal, and human in situ models) vary markedly in their microbiological complexity. Laboratory models range from mono-cultures of cariogenic species providing an acidic challenge to enamel, to the development of diverse mixed cultures growing on a habitat-simulating medium in an artificial mouth or chemostat. The latter systems are of value in determining either mechanisms of action or cause-and-effect relationships--e.g., between dietary components or antimicrobial agents and the microflora. Laboratory models have also shown that the sensitivity of oral bacteria to inhibitors is markedly reduced when growing in biofilms such as dental plaque. Animal models have proved unequivocally that caries is an infectious and transmissible disease. Their use has enabled comparisons to be made of (a) the cariogenic potential of different bacterial species, (b) the role of the diet, and (c) the effects of potential anti-caries agents. It has been claimed that no caries-protective agent currently in use has failed a rodent test. In situ human models have been designed to permit the development of "natural" plaque on standardized enamel surfaces freely exposed to the human oral environment. The microflora that develops on unadulterated surfaces is similar in composition to that found at comparable sites on vital teeth. Demineralization can be accelerated by the inoculation of additional cariogenic bacteria coupled with either intra- or extra-oral sucrose rinses. The increased realism associated with the transition from laboratory to human in situ models is countered by a reduced ability to control or manipulate the system for experimental purposes. Thus a hierarchy of tests is needed for the study of anti-caries agents, each requiring a varying degree of microbiological complexity.

Antigen specificity of serum antibody in A. actinomycetemcomitans-infected periodontitis patients

We hypothesized that serum antibody with selected antigen specificities would relate to infection and disease in the patients and, thus, describe the characteristics of potential protective antibody. This study used serum samples from 24 periodontitis patients with subgingival infection and elevated serum IgG antibody to A. actinomycetemcomitans to define the antigenic specificities of IgG, IgM, IgA, and IgG1-4 antibody to A. actinomycetemcomitans strain Y4 outer membrane antigens (OMA). Uniform IgG antibody (> 70% of the patients) was noted to antigens with M(r) of 65, 38, 29, and 17 kDa. Both IgA and IgM specificities reflected those shown for IgG in each patient. IgG1 and IgG2 antibody reacted with several OMA bands in each patient, while IgG3 antibodies were directed to numerous OMA bands in many patients and represented the most broad-based response. The IgG4 response patterns were limited to a few OMA bands. We noted a prominent occurrence of IgG reactions with OMA bands that were characteristic for individual patients. The frequency of responses to OMA of higher M(r) (i.e., > 80 kDa) and to the 34-, 31-, and 24-kDa antigens was positively related to the total IgG antibody levels. Antibody reactive with OMA bands at 65-, 38-, 29-, 17-, 15-, and 11-kDa antigens was detected in patients with few to many teeth infected with A. actinomycetemcomitans. Furthermore, patients with a high percentage of teeth with > or = 6 mm pockets had a decreased frequency of responses to the high-M(r) antigens (i.e. > 90 kDa) as well as to the 58-kDa antigen.(ABSTRACT TRUNCATED AT 250 WORDS)

Subgingival distribution of A. actinomycetemcomitans in periodontitis

This investigation developed an experimental design that (1) detailed the distribution of A. actinomycetemcomitans in subgingival plaque related to the level of serum antibody to this pathogen; (2) used broad based subgingival plaque sampling to allow a definition of the distribution of A. actinomycetemcomitans infection in periodontitis patients; (3) described the distribution of A. actinomycetemcomitans serotypes in patients and within sites; and, (4) assessed how this infection impacted upon local clinical symptoms of disease. We noted a significant positive relationship between the level of IgG anti-A. actinomycetemcomitans antibody and the frequency of teeth infected until nearly 13 teeth demonstrated an infection. Furthermore, the results showed a generally negative relationship between the antibody level and the burden of A. actinomycetemcomitans in the infected sites. Interproximal sites associated with first molar teeth were the predominant sites for subgingival colonization; incisors were also frequently infected in this population. The first molar teeth also exhibited the greatest level of A. actinomycetemcomitans, while the incisors demonstrated a high level of A. actinomycetemcomitans in individual sites. The results clearly indicated the majority of the sites sampled were colonized by a single serotype of A. actinomycetemcomitans. We detected A. actinomycetemcomitans nearly 2 x times more frequently and a significant increase in the proportion of A. actinomycetemcomitans was found in samples obtained from teeth with bleeding on probing. The results also showed a significant trend for both pocket depth and attachment levels to be related to the presence and proportion of A. actinomycetemcomitans in the subgingival plaque. These findings detail the microbiological, immunological and clinical characteristics of a unique subset of periodontitis patients that appear to exhibit disease associated (caused?) with A. actinomycetemcomitans infection irrespective of clinical categorization. The results support a unique distribution of this microorganism in the subgingival ecology that is related to active host immune responses and clinical presentation of the tooth.