Secondary bond interface assembly of polyethyleneimine on zein microparticles for rapid adsorption of Reactive Black 5

Textile dye wastewater has the characteristics of high concentration, complex composition and changeable color degree and pH, which is difficult to be effectively and completely treated, and easy to cause environmental pollution. Here, a strategy of secondary bond interface assembly of polyethyleneimine on zein microparticles (PEI) (PEI@zein) was constructed to achieve rapid and efficient removal of Reactive Black 5 (RB5), which is one of the most widely used reactive dyes in the textile industry. Structural analysis indicated that the as-prepared PEI layer immobilized on zein microparticles was constructed based on the interface assembly dominated by hydrophobic interactions and electrostatic attraction between PEI molecules and zein chains. The novel interface showed excellent absorption performance for RB5 with an absorption capacity of 631.0 mg·g^-1, rapid adsorption in 2 min, wide pH range of 4-10. Mechanism analysis suggested the effective adsorption of RB5 by PEI@zein microparticles was mainly attributed to secondary bond interface such as electrostatic interaction and hydrogen bond between RB5 and PEI immobilized on the surface of zein microparticles. Moreover, due to the presence of secondary bond interface, RB5 adsorbed on microparticles can be easily desorbed by using 0.01 M NaOH. Therefore, the strategy of secondary bond interface assembly with polyethyleneimine on zein microparticles has high potential for practical application in the treatment of dye-containing wastewater.

Influence of Initial pH Value on the Adsorption of Reactive Black 5 Dye on Powdered Activated Carbon: Kinetics, Mechanisms, and Thermodynamics

The aim of this work was to investigate the influence of initial pH value (pH₀) on the isothermal adsorption of Reactive Black 5 (RB5) dye on commercial powdered activated carbon. Four initial pH values were chosen for this experiment: pH₀ = 2.00, 4.00, 8.00, and 10.00. In order to investigate the mechanism of adsorption kinetic, studies have been performed using pseudo-first-order and pseudo-second-order kinetic models as well as an intraparticle diffusion model. In addition, thermodynamic parameters of adsorption were determined for pH₀ = 4.00. Results of this research showed that the initial pH value significantly influences the adsorption of RB5 dye onto activated carbon. The highest adsorption capacities (q_e) and efficiencies of decolouration were observed for initial pH values of pH₀ = 2.00 (q_e = 246.0 mg g⁻¹) and 10.00 (q_e = 239.1 mg g⁻¹) due to strong electrostatic interactions and attractive π···π interactions, respectively. It was also shown that the adsorption of RB5 dye on activated carbon at all initial pH values is kinetically controlled, assuming a pseudo-second-order model, and that intraparticle diffusion is not the only process that influences on the adsorption rate.

Effective degradation of azo dye from textile wastewater by electro-peroxone process

Color-producing chemicals emitted from many sources, such as textile or dye manufacturing industries, are a significant concern worldwide. The present study focuses on the electro-peroxone (EP) process for decolorizing a synthetic azo dye, C.I. Reactive Black 5 (RB5). Findings suggest that the EP process is more effective for dye degradation than ozonation and electrolysis. The EP process resulted in 100% decolorization after 60 min of contact time under optimum testing conditions such as pH 7, applied current 300 mA, and sulfate concentration 3.55 g L^-1. Based on the findings of the primary investigation, EP treatment of real textile effluent was carried out and 2 h of EP treatment resulted in 99% decolorization and 74%total organic carbon (TOC) removal. As an outcome, the EP process can treat textile wastewater in a cost-effective and environmentally friendly manner.