Immediate mobilization of distal radius fractures stabilized by volar locking plate results in a better short-term outcome than a five week immobilization: A prospective randomized trial

Long-Term Functional Outcomes after Hand Burns: A Monocentric Controlled Cohort Study

Background: Hand burns are involved in 80-90% of severe burn injuries. Even though hands correspond to a small total burn surface area (TBSA) of less than 5%, the loss of their functionality has a significant impact on the patient's life. Studies that provide long-term results regarding hand functionality after hand burns are scarce. Therefore, this study aimed to investigate functional long-term results in a patient-centric approach regarding burn depth, unilateral and bilateral hand involvement, and (non-)isolated hand burns as potential influencing factors in patients with hand burns. Methods: We conducted a controlled cohort study of patients with burned hands treated at our department between 2005 and 2022. Healthy age-, sex-, and handedness-matched participants were used as controls. Data on the demographics, burn-related injuries, and treatments were collected. For a patient-centric approach, we used the Disabilities of the Arm, Shoulder, and Hand Questionnaire (Quick-DASH) and the Michigan Hand Questionnaire (MHQ) as patient-reported outcome measures for functional long-term evaluation, and the Patient and Observer Scar Assessment Scale (patient scale) for assessing long-term scar quality. Results: We enrolled 61 patients with 88 affected hands and 63 matched control participants. Up to 77.1% of the participants were male, with a mean age of 50.7 (±15.5) years and a follow-up of 8.1 (±4.7) years. The mean TBSA was 13.9% (±15.8), with 72.4% of the hands presenting with deep partial-thickness and full-thickness burns and most of the patients had only one hand affected (55.7%). The hand burn patients perceived significantly worse long-term functional scores in every domain of the MHQ as well as in the "overall function" and "work" of the Quick-DASH. Superficial hand burns negatively affected the two-handed activities of daily living (p = 0.013) and aesthetic appearance (p = 0.005) when both hands were involved. Isolated hand burns were associated with more difficulties in work performance (p = 0.03), whereas patients with bilateral hand involvement perceived more pain (p = 0.025). Conclusions: The patients with hand burns can achieve satisfactory long-term functional outcomes over time, but they do not reach the same long-term hand functionality as the healthy matched control group. Our study revealed that factors such as burn depth, unilateral or bilateral hand involvement, and (non-)isolated hand burns indeed have an impact on certain aspects of perceived long-term hand functionality.

Surgical options for distal radius fractures of type C in elderly patients over 65 years old: a comparison of external fixation with Kirschner wires and volar locking plate

BACKGROUND

ue to the lack of consensus on the optimal surgical treatment for distal radius fractures (DRF) in elderly patients over 65 years old, the purpose of this study was to compare the efficacy of external fixation (EF) with Kirschner wires and volar locking plate (VLP) in the treatment of DRF through a retrospective cohort study. We hypothesized that there would be no significant difference in overall complications and functional recovery between the two methods.

METHODS

We retrospectively analyzed 62 patients over 65 years old who underwent surgical treatment for C-type DRF between 2019 and 2022. Based on the different treatment methods, they were divided into the EF group and the VLP group. General data, inpatient data, and postoperative complications during follow-up were recorded. The X-ray images before surgery, after surgery, and at the last follow-up were analyzed, and the results of wrist motion range, Gartland-Werley wrist joint score, and DASH score were evaluated 6 months after surgery for both groups.

RESULT

Thirty patients underwent closed reduction and external fixation combined with Kirschner wire fixation, while 32 underwent open reduction and VLP fixation. The EF group had significantly shorter operation time, intraoperative blood loss, injury-to-surgery time, and hospital stay compared to the VLP group (all p < 0.001). At the last follow-up, the radiographic parameters (ulnar variance and radial inclination) and wrist joint function (wrist dorsiflexion and forearm supination) were better in the VLP group than in the EF group (p = 0.04, p = 0.01, p = 0.001, p = 0.02, respectively). However, there was no significant difference in overall Gartland-Werley wrist joint score, DASH score, and incidence of postoperative complications between the two groups (p = 0.31, p = 0.25, p = 0.47, respectively).

CONCLUSION

For patients aged 65 and above with distal radius fractures (DRF) of type C, VLP and external fixation with Kirschner wires yield comparable functional outcome and complications rate at the short term. However, VLP allowed restoration of better radiological parameters.

Three Column Fixation Through a Single Incision in Distal Radius Fractures

Purpose  The purpose of this study was to evaluate the clinical and functional results of 67 patients with distal radius fracture (DRF), treated with a modified surgical technique that allows three-column fixation through the same palmar approach. Patients and Methods  Between 2014 and 2019, we treated 67 patients using a particular surgical technique. All patients suffered DRF, classified using the universal classification system. Two different intervals were developed palmary: the first ulnarly to the flexor carpi radialis tendon for direct visualization of the distal radius and the second one radially to the radial artery for direct visualization of the styloid process. An anatomic volar locking compression plate was applied to all patients. The radial styloid process was fixed and stabilized either with Kirschner-wires or an anatomic plate through the same incision. Functional results were evaluated based on the Disabilities of the Arm, Shoulder and Hand and Mayo wrist scores. Range of motion and grip strength of the injured wrist were statistically compared with the opposite side. Results  The mean follow-up was 47 months (13-84). All fractures were united, and all patients recovered to the preinjury level of activity. The mean flexion-extension range was 73.8° to 55.2° and the supination-pronation range 82.8° to 67°. No infection or nonunion occurred. No major complications were reported. Conclusion  Open reduction and internal fixation, under specific indications, is the best treatment option in DRF. The described technique provides excellent visualization to the distal radius surfaces and allows the internal fixation of the radial columns through the same skin incision. Therefore, it can constitute an efficient choice in the treatment armamentarium of DRF.

A Volar Locking Plate With Fossa Specific Fixation Provides Comparable Stability Between Articular and Nonarticular Cadaveric Models of Distal Radius Fracture

BACKGROUND

Distal radius fractures often present with a 3-part articular fragmentation pattern, with separation of the dorsal and volar lunate fossa. The column concept of distal radius fixation addresses the importance of stabilizing both the scaphoid fossa lateral column and the lunate fossa intermediate column. Recent evidence strengthens the value of immediate postoperative mobilization. Satisfactory outcomes following these protocols are predicated on volar locking plates (VLPs) providing adequate stability to the fracture repair. We hypothesize that a VLP which individually supports both lateral and intermediate distal radius columns may provide comparable stability between articular and non-articular cadaveric fracture models under parameters meant to simulate postoperative loading.

METHODS

Eleven cadaveric matched pair specimens were randomized to receive a simulated AO Type A2 non-articular distal radius fracture on one side with an AO Type C3 articular fracture on the contralateral side. Stiffness during cyclic loading was compared between fracture groups. A matched-paired Student t-test was used to determine statistical significance (P = .05).

RESULTS

There were no significant differences (P = .35) in stiffness between the articular models (mean 370.0 N/mm, +/-93.5) and the non-articular models (360.4 N/mm, +/-60.0) of distal radius fracture.

CONCLUSION

A VLP that individually supports the scaphoid and lunate fossa with fixed angle subchondral support may provide comparable fixation strength with resistance to displacement between articular and non-articular fracture patterns. The current results suggest that fossa-specific VLP fixation in articular fractures can maintain construct stability during postoperative loading.

Three-Dimensional Planning and Patient-Specific Instrumentation for the Fixation of Distal Radius Fractures

Background and Objectives: Three-dimensional planning and guided osteotomy utilizing patient-specific instrumentation (PSI) with the contralateral side used as a reference have been proven as effective in the treatment of malunions following complex fractures of the distal radius. However, this approach has not yet been described in relation to fracture reduction of the distal radius. The aim of this study was to assess the technical and logistical feasibility of computer-assisted surgery in a clinical setting using PSI for fracture reduction and fixation. Materials and Methods: Five patients with varied fracture patterns of the distal radius underwent operative treatment with using PSI. The first applied PSI guide allowed specific and accurate placement of Kirschner wires inside the multiple fragments, with subsequent concurrent reduction using a second guide. Results: Planning, printing of the guides, and operations were performed within 5.6 days on average (range of 1–10 days). All patients could be treated within a reasonable period of time, demonstrating good outcomes, and were able to return to work after a follow-up of three months. Mean wrist movements (°) were 58 (standard deviation (SD) 21) in flexion, 62 (SD 15) in extension, 73 (SD 4) in pronation and 74 (SD 10) in supination at a minimum follow-up of 6 months. Conclusions: Three-dimensional planned osteosynthesis using PSI for treatment of distal radius fractures is feasible and facilitates reduction of multiple fracture fragments. However, higher costs must be taken into consideration for this treatment.