Matching articular surfaces of selected donor and recipient sites for cylindrical osteochondral grafts of the femur: quantitative evaluation using a 3-dimensional laser scanner

Region partitioning of articular cartilage with streaming-potential-based parameters and indentation maps

Articular cartilage exhibits site-specific tissue inhomogeneity, for which the tissue properties may continuously vary across the articular surface. To facilitate practical applications such as studying site-specific cartilage degeneration, the inhomogeneity may be approximated with several distinct region-wise variations, with one set of tissue properties for one region. A clustering method was previously developed to partition such regions using cartilage indentation-relaxation and thickness mapping instead of simply using surface geometry. In the present study, a quantitative parameter based on streaming potential measurement was introduced as an additional feature to assess the applicability of the methodology with independent datasets. Experimental data were collected from 24 sets of femoral condyles, extracted from fresh porcine stifle joints, through streaming potential mapping, automated indentation, and needle penetration tests. K-means clustering and Elbow method were used to find optimal region partitions. Consistent with previous findings, three regions were suggested for either lateral or medial condyle regardless of left or right joint. The region shapes were approximately triangular or trapezoidal, which was similar to what was found previously. Streaming potentials were confirmed to be region-dependent, but not significantly different among joints. The cartilage was significantly thicker in the medial than lateral condyles. The region areas were consistent among joints, and comparable to that found in a previous study. The present study demonstrated the capability of region partitioning methods with different variables, which may facilitate new applications whenever site-specific tissue properties must be considered.

Characterizing site-specific mechanical properties of knee cartilage with indentation-relaxation maps and machine learning

Knee cartilage experiences site-specific focal lesion and degeneration, which is likely associated with tissue inhomogeneity and nonuniform mechanical stimuli in the joint, for which a complete picture remains to be depicted. The present study aimed to develop a methodology to quantify knee cartilage inhomogeneity using porcine knee specimens. Automated indentation-relaxation and needle probing were performed on fully intact cartilage to obtain data that essentially represent continuous distributions of cartilage properties in the knee. Machine learning was then introduced to approximate the tissue inhomogeneity with several regions via clusters of indentation locations, and finite element modeling was used to obtain poromechanical properties for each region using indentation-relaxation and thickness data. Significant region dependence was established from the full time-dependent mechanical response. Seventeen regions, or clusters, were found to best approximate the site-specific poromechanical properties of articular cartilage for femoral groove, lateral and medial condyles and tibial plateaus, after up to eight clusters were tested for each of the five cartilage sections. The region partitions recommended, and tissue properties acquired would facilitate implementation of tissue inhomogeneity in future applications, e.g., contact modeling of the knee joint. The results obtained from 14 porcine knees revealed interesting region differences, for example, the two condyles have the same effective stiffness when responding to slowly applied mechanical loadings but substantially lower stiffness in the medial condyle when responding to fast loadings. This mechanical behavior may be associated with the fact that medial femoral cartilage is more prone to focal lesions than the lateral one.

Ideal Donor Site for Osteochondral Autografting of the Distal Femur Using Radius of Curvature: A 3-Dimensional High-Resolution Scanner Comparison

OBJECTIVE

To compare radius of curvature (RoC) of distal femur osteochondral autograft transfer (OAT) donor sites from the intercondylar notch and trochlear ridge with recipient sites on the distal and posterior condyles and evaluate differences between recipient sites.

DESIGN

Nineteen cadaveric femurs were scanned with a 3-dimensional high-resolution sensor. Donor regions included the lateral (LTR) and medial trochlear ridges (MTR), and the lateral (LICN) and medial intercondylar notch (MICN). Recipient regions analyzed were the distal medial (DMFC), posterior medial (PMFC), distal lateral (DLFC), and posterior lateral femur condyle (PLFC). Six-millimeter OAT grafts were simulated, and average RoC of all regions was compared using an analysis of variance. Post hoc testing was performed using Fisher's least significant difference.

RESULTS

We found no significant differences in RoC of the LICN compared with all 4 recipient sites (P = 0.19, 0.97, 0.11, and 0.75 for DLFC, PLFC, DMFC, and PMFC, respectively) or the LTR and MTR to the posterior condyles (LTR vs. PLFC and PMFC; P = 0.72, 0.47, MTR vs. PLFC and PMFC P = 0.39, 0.22, respectively). Significant differences were found for RoC of the MICN compared with each recipient site (P < 0.001) and between distal and posterior femoral condyles (DLFC vs. PLFC, P = 0.016; DMFC vs. PMFC, P = 0.023).

CONCLUSION

The LICN is the ideal donor option for all recipient sites on the femoral condyles with respect to RoC of 6-mm OAT plugs. The MTR and LTR were acceptable donor sources for the posterior condyles, while the MICN was a poor match for all recipient sites. Additionally, the distal femur condyle and posterior femur condyle have different RoCs.

Local curvature mismatch may worsen the midterm functional outcomes of osteochondral allograft transplantation

PURPOSE

This study aimed to determine the magnitude of local curvature matching in the sagittal plane between an implanted graft and the condylar region receiving the graft and to analyze its effect on clinical outcomes in patients undergoing osteochondral allograft transplantation (OCA).

METHODS

Patients who underwent knee OCA between 2016 and 2019 without circumferential step-off and were matched with a donor in accordance with the conventional matching process were included. The magnitude of donor-host local curvature matching was measured using postoperative sagittal magnetic resonance imaging data with Syngo (Siemens Medical Solutions, Forchheim, Germany) and GeoGebra (GeoGebra GmbH, Linz, AU) software. In addition to radiological evaluation, ROC analysis was performed to compare the patient-reported outcome measures (PROMs) obtained during the 2-year follow-up period among the patients in the SagA group, who had a graft match in the sagittal plane; SagB group, who had low convexity of the graft in the sagittal plane; and SagC group, who had high convexity of the graft in the sagittal plane in accordance with the determined indices.

RESULTS

The study included 27 patients who fulfilled the inclusion criteria, and the mean clinical scores of the SagC group were not statistically significantly higher than those of the other groups at any timepoint during the follow-up. The mean Tegner, IKDC, total KOOS and SF-12 physical and mental health scores of the SagC group were lower than those of the other two groups at various follow-up time points, particularly at month 24 (p < 0.05). There were no significant differences between the SagA and SagB groups in the PROMs at any of the follow-up time points (n.s.). The significant differences observed between the SagC group and the other groups in the mean KOOS scores for function in daily living and function in sport and recreation were also observed between the SagA and SagB groups at the follow-ups (p < 0.05).

CONCLUSION

During OCA, a local curvature mismatch between the donor and the host involving large graft convexity may have a negative impact on midterm clinical outcomes. A preoperative analysis of the convexity relationship between the defect site and the graft region in the hemicondylar allograft to be used may enhance donor-host matching. The local analysis method described in the current study may also facilitate graft supply by ensuring donor-host matching without condyle-side and size matching.

LEVEL OF EVIDENCE

III.

Topographic Analysis of the Distal Femoral Condyle Articular Cartilage Surface: Adequacy of the Graft from Opposite Condyles of the Same or Different Size for the Osteochondral Allograft Transplantation

OBJECTIVE

To analyze the topography of the opposite condyle to treat focal femoral condyle articular defects with an osteochondral allograft (OCA).

DESIGN

Three groups were created: Group 1, same condyle with same width; Group 2, opposite condyle with same width; Group 3, opposite condyle with different width. Computed tomography (CT) of 22 cadaveric femoral hemi-condyles was used to create 3-dimensional CT models that were exported into point-cloud models. Three zones of the donor condyle (anterior, middle, and posterior) were quantified. Four defect sizes were created (15, 18, 23, 25 mm) at the weight-bearing region. The defect was moved throughout each donor condyle zone and the least distance was calculated, defined as the shortest distance between the defect and the donor condyle.

RESULTS

The mean least distance increased with larger defect size in all groups, yet there was a less than 0.2 mm difference in the least distance among defect sizes. The 15, 18, and 23 mm defect models in Group 1 exhibited greater least distances at the anterior than middle and posterior zones. The 15 mm defect model exhibited greater least distance at the anterior zone than posterior zone in Group 3. However, there was a less than 0.05 mm difference in the mean least distance between zones. There was no significant difference in the least distance between groups.

CONCLUSION

OCAs from opposite condyles yield similar topographic matching to OCAs from the same condyles, suggesting that opposite condyles can be utilized. Clinical correlation and outcomes are necessary.

Topographic Matching of Osteochondral Allograft Transplantation Using Lateral Femoral Condyle for the Treatment of Medial Femoral Condyle Lesions: A Computer-Simulated Model Study

PURPOSE

The purpose of this study was to determine whether lateral femoral condyle (LFC) osteochondral allografts (OCAs) would have a similar articular cartilage contour and resulting subchondral bone contour when compared with medial femoral condyle (MFC) allografts for the treatment of MFC chondral defects.

METHODS

In this controlled laboratory study, human femoral hemi-condyles (10 MFCs and 8 LFCs) were divided into 4 groups: MFC recipient, MFC donor, ipsilateral LFC donor, and contralateral LFC donor. Computed tomography (CT) images were obtained for each, and 3D CT models were created and exported into point-cloud models. Three circular defect and graft models were created on each condyle at 3 locations (0°, 45° posterior, and 90° posterior regions). The graft model in each donor group was virtually placed on the MFC recipient defect model. The least distances of the articular cartilage surface between the graft and the defect models and the resulting mean least distance of the subchondral bone surface were calculated.

RESULTS

The mean least distance of the articular cartilage surface was less than 0.5 mm in all donor-recipients, and there was no significant difference among donor groups. Although the mean least distance of the subchondral bone surface was significantly greater than the articular cartilage surface in all donor groups (P < .001), there was no significant difference among donor groups.

CONCLUSION

Ipsilateral and contralateral LFC grafts provided similar articular cartilage surface and resulting subchondral bone surface matching with that of MFC grafts, suggesting that LFCs could be a potential source of OCA for the treatment of MFC lesions.

CLINICAL RELEVANCE

Ipsilateral and contralateral LFCs can be suitable donor sites for the treatment of MFC lesions with OCAs.

Graft-Recipient Anteroposterior Mismatch Does Not Affect the Midterm Clinical Outcomes of Osteochondral Allograft Transplantation of the Femoral Condyle

BACKGROUND

For the treatment of femoral condyle cartilage defects with osteochondral allograft transplantation (OCA), many surgeons have relaxed their graft-recipient size-matching criteria given the limited allograft supply. However, since the anteroposterior (AP) length is typically correlated with the radius of curvature for a given condyle, a large mismatch in graft-recipient AP length can indicate a corresponding mismatch in the radius of curvature, leading to articular incongruity after implantation.

PURPOSE

To evaluate the association between femoral condyle graft-recipient AP mismatch and clinical outcomes of OCA.

STUDY DESIGN

Case-control study; Level of evidence, 3.

METHODS

A retrospective review was conducted of patients treated with OCA for femoral condyle chondral defects from 2000 to 2015. Graft characteristics, including AP and mediolateral dimensions, were gathered from vendor-specific allograft offering documents. Patient condyle dimensions were measured on preoperative magnetic resonance imaging. Reoperations and patient responses to validated outcome measures were reviewed. Failure was defined by any partial removal/revision of the allograft or conversion to knee arthroplasty. A multivariable logistic regression model was fitted to examine the association of AP mismatch with OCA failure while adjusting for patient age and number of previous ipsilateral knee surgical procedures.

RESULTS

A total of 69 knees from 69 patients (mean age, 35.7 years; 71% male) met the inclusion criteria. Mean duration of follow-up was 4 years (range, 2-16 years). The mean absolute graft-recipient AP mismatch was 6.7 mm (range, 0-20 mm; P < .01). At final follow-up, 19 knees had failed. There was no significant difference in the mean absolute AP mismatch between failures (8.1 mm) and nonfailures (6.2 mm; P = .17). Multivariate logistic regression revealed that AP mismatch was not associated with graft failure ( P = .14). At final follow-up, significant improvements were noted in the 36-Item Short Form Health Survey, International Knee Documentation Committee subjective form, and Knee Outcome Survey-Activities of Daily Living ( P < .01 for all). Magnitude of AP mismatch was not associated with postoperative outcome scores or achievement of minimal clinically significant differences in outcome scores.

CONCLUSION

Magnitude of graft-recipient AP mismatch was not associated with midterm OCA failure rates or patient-reported outcome scores, suggesting that AP length mismatch within the limits measured here is not a contraindication for graft acceptance.

Rational Design of Prevascularized Large 3D Tissue Constructs Using Computational Simulations and Biofabrication of Geometrically Controlled Microvessels

A major challenge in the development of clinically relevant 3D tissue constructs is the formation of vascular networks for oxygenation, nutrient supply, and waste removal. To this end, this study implements a multimodal approach for the promotion of vessel-like structures formation in stiff fibrin hydrogels. Computational simulations have been performed to identify the easiest microchanneled configuration assuring normoxic conditions throughout thick cylindrical hydrogels (8 mm height, 6 mm ∅), showing that in our configuration a minimum of three microchannels (600 μm ∅), placed in a non-planar disposition, is required. Using small hydrogel bricks with oxygen distribution equal to the microchanneled configuration, this study demonstrates that among different culture conditions, co-culture of mesenchymal and endothelial cells supplemented with ANG-1 and VEGF leads to the most developed vascular network. Microchanneled hydrogels have been then cultured in the same conditions both statically and in a bioreactor for 7 d. Unexpectedly, the combination between shear forces and normoxic conditions is unable to promote microvascular networks formation in three-channeled hydrogels. Differently, application of either shear forces or normoxic conditions alone results in microvessels outgrowth. These results suggest that to induce angiogenesis in engineered constructs, complex interactions between several biochemical and biophysical parameters have to be modulated.

Topographic analysis of the capitellum and distal femoral condyle: finding the best match for treating osteochondral defects of the humeral capitellum

PURPOSE

The purpose of this study was to determine the donor zone of most congruent topographic match by comparing 4 donor sites from the femur with 4 potential recipient sites of osteochondritis dissecans at the capitellum.

METHODS

Computed tomography was performed on 5 right elbows and 6 right medial and 6 right lateral distal femoral hemicondyles, which included the femoral notch. Three-dimensional computed tomography models were created and exported into point-cloud models. A local coordinate map of the distal humerus and distal femoral articular surfaces was created. The capitellum was compared with the medial and lateral distal femoral condyles, with 2 donor zones in each condyle (medial trochlea and medial intercondylar notch or lateral trochlea and lateral intercondylar notch). In each capitellum 4 combinations of 10-mm defects were simulated (central and lateral, 30° and 45° anterior to shaft of humerus), resulting in 480 capitellum-femur comparative combinations being tested. The capitellum surfaces were virtually placed on a point on the femoral articular surface in 3-dimensional space. The least distances (i.e., the shortest distance from the point in question to the corresponding point in space) between the point clouds on the distal humerus and distal femoral articular surfaces were calculated.

RESULTS

There was a less than 0.1-mm difference in the topographic articular surface match among the 4 commonly used donor sites of the distal femur and 4 recipient sites of the capitellum. However, the best match for any given 10-mm capitellar defect (central 30°, central 45°, lateral 30°, and lateral 45°) was the same such that the lateral trochlea on the femur always yielded the best fit compared with the 3 other graft locations (P < .005).

CONCLUSIONS

Our results indicate that there is a less than 0.1-mm difference in the topographic articular surface match among the 4 commonly used donor sites of the distal femur and the capitellum. The findings suggest that all 4 donor sites provide close articular matching for the capitellum articular surface, with the lateral trochlea articular surface providing the best match.

CLINICAL RELEVANCE

These data suggest that a single donor plug may be obtained from multiple sites in the knee and placed into capitellar lesions with an excellent topographic articular surface match. The findings of our study will be useful to surgeons when managing capitellar osteochondritis dissecans lesions.