Rotator Cuff Tendon Healing Using Human Dermal Fibroblasts: Histological and Biomechanical Analyses in a Rabbit Model of Chronic Rotator Cuff Tears

Recombinant Human Parathyroid Hormone Biocomposite Promotes Bone-to-Tendon Interface Healing by Enhancing Tenogenesis, Chondrogenesis, and Osteogenesis in a Rabbit Model of Chronic Rotator Cuff Tears

PURPOSE

To investigate the effect of recombinant human parathyroid hormone (rhPTH) biocomposite on bone-to-tendon interface (BTI) healing for surgical repair of a chronic rotator cuff tear (RCT) model of rabbit, focusing on genetic, histologic, biomechanical and micro-computed tomography (CT) evaluations.

METHODS

Sixty-four rabbits were equally assigned to the 4 groups: saline injection (group A), nanofiber sheet alone (group B), rhPTH-soaked nanofiber sheet (nanofiber sheet was soaked with rhPTH, group C), and rhPTH biocomposite (rhPTH permeated the nanofiber sheet by coaxial electrospinning, group D). The release kinetics of rhPTH (groups C and D) was examined for 6 weeks in vitro. Nanofiber scaffolds were implanted on the surface of the repair site 6 weeks after the induction of chronic RCT. Genetic and histologic analyses were conducted 4 weeks after surgery. Furthermore, genetic, histologic, biomechanical, micro-CT, and serologic analyses were performed 12 weeks after surgery.

RESULTS

In vivo, group D showed the highest collagen type I alpha 1 (COL1A1), collagen type III alpha 1 (COL3A1), and bone morphogenetic protein 2 (BMP-2) messenger RNA (mRNA) expression levels (all P < .001) 4 weeks after surgery; however, there were no differences between groups at 12 weeks postsurgery. After 12 weeks postsurgery, group D showed better collagen fiber continuity and orientation, denser collagen fibers, more mature bone-to-tendon junction, and greater fibrocartilage layer formation compared with the other groups (all P < .05). Furthermore, group D showed the highest load-to-failure rate (28.9 ± 2.0 N/kg for group A, 30.1 ± 3.3 N/kg for group B, 39.7 ± 2.7 N/kg for group C, and 48.2 ± 4.5 N/kg for group D, P < .001) and micro-CT outcomes, including bone and tissue mineral density, and bone volume/total volume rate (all P < .001) at 12 weeks postsurgery.

CONCLUSIONS

In comparison to rhPTH-soaked nanofiber sheet and the other control groups, rhPTH biocomposite effectively accelerated BTI healing by enhancing the mRNA expression levels of COL1A1, COL3A1, and BMP-2 at an early stage and achieving tenogenesis, chondrogenesis, and osteogenesis at 12 weeks after surgical repair of a chronic RCT model of rabbit.

CLINICAL RELEVANCE

The present study might be a transitional study to demonstrate the efficacy of rhPTH biocomposites on BTI healing for surgical repair of chronic RCTs as an adaptable polymer biomaterial in humans.

Macromolecular crowding in human tenocyte and skin fibroblast cultures: A comparative analysis

Although human tenocytes and dermal fibroblasts have shown promise in tendon engineering, no tissue engineered medicine has been developed due to the prolonged ex vivo time required to develop an implantable device. Considering that macromolecular crowding has the potential to substantially accelerate the development of functional tissue facsimiles, herein we compared human tenocyte and dermal fibroblast behaviour under standard and macromolecular crowding conditions to inform future studies in tendon engineering. Basic cell function analysis made apparent the innocuousness of macromolecular crowding for both cell types. Gene expression analysis of the without macromolecular crowding groups revealed expression of tendon related molecules in human dermal fibroblasts and tenocytes. Protein electrophoresis and immunocytochemistry analyses showed significantly increased and similar deposition of collagen fibres by macromolecular crowding in the two cell types. Proteomics analysis demonstrated great similarities between human tenocyte and dermal fibroblast cultures, as well as the induction of haemostatic, anti-microbial and tissue-protective proteins by macromolecular crowding in both cell populations. Collectively, these data rationalise the use of either human dermal fibroblasts or tenocytes in combination with macromolecular crowding in tendon engineering.

The Effect of Combining Hyaluronic Acid and Human Dermal Fibroblasts on Tendon Healing

BACKGROUND

The incidence of rotator cuff tears is rapidly increasing, and operative techniques for rotator cuff repair have been developed. However, the rates of postoperative retear remain high.

PURPOSE/HYPOTHESIS

The purpose was to determine the effects of human dermal fibroblasts (HDFs) with hyaluronic acid (HA) on tendon-to-bone healing in a rabbit model of chronic rotator cuff tear injury. It was hypothesized that HA would enhance HDF proliferation and that a combination of HA and HDFs would produce a synergistic effect on the healing of repaired rotator cuff tendons of rabbits.

STUDY DESIGN

Controlled laboratory study.

METHODS

For in vitro study, HDFs were plated on a 24-well plate. After 1 day, 2 wells were designated as the test group and treated with 0.75% HA in phenol red-free Dulbecco's modified Eagle medium (DMEM). An other 2 wells served as control groups and were treated with the same volume of phenol red-free DMEM without HA. Each group was duplicated, resulting in a total of 4 wells, with 2 wells in each group for replication purposes. The cells were incubated for 24 hours, followed by 72-hour cultivation. Absorbance ratios at 96 and 24 hours were compared to evaluate cell proliferation. For the in vivo study, a total of 24 rabbits were randomly allocated to groups A, B, and C (n = 8 each). Supraspinatus tendons were detached bilaterally and left for 6 weeks to establish a chronic rotator tear model. Torn tendons were subsequently repaired using the following injections: group A, 0.5 × 106 HDFs with HA; group B, HA only; and group C, saline only. At 12 weeks after repair, biomechanical tests and histological evaluation were performed.

RESULTS

In vitro study showed that HDF proliferation significantly increased with HA (HDFs with HA vs HDFs without HA; 3.96 ± 0.09 vs 2.53 ± 0.15; P < .01). In vivo, group A showed significantly higher load-to-failure values than the other groups (53.8 ± 6.9 N/kg for group A, 30.6 ± 6.4 N/kg for group B, and 24.3 ± 7.6 N/kg for group C; P < .001). Histological evaluation confirmed that group A showed higher collagen fiber density and better collagen fiber continuity, tendon-to-bone interface maturation, and nuclear shape than the other groups (all P < .05).

CONCLUSION

This controlled laboratory study verified the potential of the combination of HDFs and HA in enhancing healing in a chronic rotator cuff tear rabbit model.

CLINICAL RELEVANCE

A potential synergistic effect on rotator cuff tendon healing may be expected from a combination of HDFs and HA.

Bioactive Scaffold With Spatially Embedded Growth Factors Promotes Bone-to-Tendon Interface Healing of Chronic Rotator Cuff Tear in Rabbit Model

BACKGROUND

Functional restoration of the bone-to-tendon interface (BTI) after rotator cuff repair is a challenge. Therefore, numerous biocompatible biomaterials for promoting BTI healing have been investigated.

PURPOSE

To determine the efficacy of scaffolds with spatiotemporal delivery of growth factors (GFs) to accelerate BTI healing after rotator cuff repair.

STUDY DESIGN

Controlled laboratory study.

METHODS

An advanced 3-dimensional printing technique was used to fabricate bioactive scaffolds with spatiotemporal delivery of multiple GFs targeting the tendon, fibrocartilage, and bone regions. In total, 50 rabbits were used: 2 nonoperated controls and 48 rabbits with induced chronic rotator cuff tears (RCTs). The animals with RCTs were divided into 3 groups: (A) saline injection, (B) scaffold without GF, and (C) scaffold with GF. To induce chronic models, RCTs were left unrepaired for 6 weeks; then, surgical repairs with or without bioactive scaffolds were performed. For groups B and C, each scaffold was implanted between the bony footprint and the supraspinatus tendon. Four weeks after repair, quantitative real-time polymerase chain reaction and immunofluorescence analyses were performed to evaluate early signs of regenerative healing. Histological, biomechanical, and micro-computed tomography analyses were performed 12 weeks after repair.

RESULTS

Group C had the highest mRNA expression of collagen type I alpha 1, collagen type III alpha 1, and aggrecan. Immunofluorescence analysis showed the formation of an aggrecan+/collagen II+ fibrocartilaginous matrix at the BTI when repaired with scaffold with GFs. Histologic analysis revealed greater collagen fiber continuity, denser collagen fibers, and a more mature tendon-to-bone junction in GF-embedded scaffolds than those in the other groups. Group C demonstrated the highest load-to-failure ratio, and modulus mapping showed that the distribution of the micromechanical properties of the BTI repaired with GF-embedded scaffolds was comparable with that of the native BTI. Micro-computed tomography analysis identified the highest bone mineral density and bone volume/total volume ratio in group C.

CONCLUSION

Bioactive scaffolds with spatially embedded GFs have significant potential to promote the BTI healing of chronic RCTs in a rabbit model.

CLINICAL RELEVANCE

The scaffolds with spatiotemporal delivery of GF may serve as an off-the-shelf biomaterial graft to promote the healing of RCTs.

Large animal models for the study of tendinopathy

Tendinopathy has a high incidence in athletes and the aging population. It can cause pain and movement disorders, and is one of the most difficult problems in orthopedics. Animal models of tendinopathy provide potentially efficient and effective means to develop understanding of human tendinopathy and its underlying pathological mechanisms and treatments. The selection of preclinical models is essential to ensure the successful translation of effective and innovative treatments into clinical practice. Large animals can be used in both micro- and macro-level research owing to their similarity to humans in size, structure, and function. This article reviews the application of large animal models in tendinopathy regarding injuries to four tendons: rotator cuff, patellar ligament, Achilles tendon, and flexor tendon. The advantages and disadvantages of studying tendinopathy with large animal models are summarized. It is hoped that, with further development of animal models of tendinopathy, new strategies for the prevention and treatment of tendinopathy in humans will be developed.

Three-dimensionally printed recombinant human parathyroid hormone-soaked nanofiber sheet accelerates tendon-to-bone healing in a rabbit model of chronic rotator cuff tear

BACKGROUND

Recombinant human parathyroid hormone (rhPTH) promotes tendon-to-bone healing in humans and animals with rotator cuff tear (RCT). However, problems regarding repeated systemic rhPTH injections in humans exist. This study was conducted to evaluate the effect of topical rhPTH administration using 3-dimensionally (3D) printed nanofiber sheets on tendon-to-bone healing in a rabbit RCT model compared to that of direct topical rhPTH administration.

METHODS

Eighty rabbits were randomly assigned to 5 groups (n = 16 each). To create the chronic RCT model, we induced complete supraspinatus tendon tears in both shoulders and left them untreated for 6 weeks. All transected tendons were repaired in a transosseous manner with saline injection in group A, hyaluronic acid (HA) injection in group B, 3D-printed nanofiber sheet fixation in group C, rhPTH and HA injection in group D, and 3D-printed rhPTH- and HA-soaked nanofiber sheet fixation in group E. Genetic (messenger RNA expression evaluation) and histologic evaluations (hematoxylin and eosin and Masson trichrome staining) were performed in half of the rabbits at 4 weeks postrepair. Genetic, histologic, and biomechanical evaluations (mode of tear and load to failure) were performed in the remaining rabbits at 12 weeks.

RESULTS

For genetic evaluation, group E showed a higher collagen type I alpha 1 expression level than did the other groups (P = .008) at 4 weeks. However, its expression level was downregulated, and there was no difference at 12 weeks. For histologic evaluation, group E showed greater collagen fiber continuity, denser collagen fibers, and more mature tendon-to-bone junction than did the other groups (P = .001, P = .001, and P = .003, respectively) at 12 weeks. For biomechanical evaluation, group E showed a higher load-to-failure rate than did the other groups (P < .001) at 12 weeks.

CONCLUSION

Three-dimensionally printed rhPTH-soaked nanofiber sheet fixation can promote tendon-to-bone healing of chronic RCT.

Allogeneic Dermal Fibroblasts Improve Tendon-to-Bone Healing in a Rabbit Model of Chronic Rotator Cuff Tear Compared With Platelet-Rich Plasma

PURPOSE

To compare the effects of allogeneic dermal fibroblasts (ADFs) and platelet-rich plasma (PRP) on tendon-to-bone healing in a rabbit model of chronic rotator cuff tear.

METHODS

Thirty-two rabbits were divided into 4 groups (8 per group). In 2 groups, the supraspinatus tendon was detached and was left as such for 6 weeks. At 6 weeks after creating the tear model, we performed transosseous repair with 5 × 10⁶ ADFs plus fibrin injection in the left shoulder and PRP plus fibrin in the right shoulder. The relative expression of the COL1, COL3, BMP2, SCX, SOX9, and ACAN genes was assessed at 4 weeks (group A) and 12 weeks (group B) after repair. Histologic and biomechanical evaluations of tendon-to-bone healing at 12 weeks were performed with ADF injection in both shoulders in group C and PRP injection in group D.

RESULTS

At 4 weeks, COL1 and BMP2 messenger RNA expression was higher in ADF-injected shoulders (1.6 ± 0.8 and 1.0 ± 0.3, respectively) than in PRP-injected shoulders (1.0 ± 0.3 and 0.6 ± 0.3, respectively) (P = .019 and P = .013, respectively); there were no differences in all genes in ADF- and PRP-injected shoulders at 12 weeks (P > .05). Collagen continuity, orientation, and maturation of the tendon-to-bone interface were better in group C than in group D (P = .024, P = .012, and P = .013, respectively) at 12 weeks, and mean load to failure was 37.4 ± 6.2 N/kg and 24.4 ± 5.2 N/kg in group C and group D, respectively (P = .015).

CONCLUSIONS

ADFs caused higher COL1 and BMP2 expression than PRP at 4 weeks and showed better histologic and biomechanical findings at 12 weeks after rotator cuff repair of the rabbit model. ADFs enhanced healing better than PRP in the rabbit model.

CLINICAL RELEVANCE

This study could serve as a transitional study to show the effectiveness of ADFs in achieving tendon-to-bone healing after repair of chronic rotator cuff tears in humans.

Editorial Commentary: Allogenic Dermal Fibroblasts in Collagen Matrix Scaffold Enhance Rotator Cuff Repair in an Animal Model

There has been a recent surge of interest on the use of biologic supplements to facilitate rotator cuff repair healing. Experimental evidence appears to support use of allogenic dermal fibroblasts (ADFs), either in the form of local injection or tenocytes embedded in collagen matrix scaffold, to enhance healing of a repaired rotator cuff tendon tear in an animal model. When compared with the ADFs, the platelet-rich plasma (PRP)-induced response seems to be limited in terms of the specific increases in local collagen 1 concentration, thus resulting in a bone-tendon healing response that is inferior in both biology and biomechanical behavior under the same laboratory conditions. While on the one hand, there is pilot data supporting use of dermal fibroblast in the clinical setting, thus reinforcing the animal study findings, on the other hand, we are also aware of the encouraging biologic changes that occurred in the retrieved acellular dermal matrix (ADM) allograft that was used for superior capsular reconstruction as a treatment of irreparable rotator cuff tears. In theory, ADFs locally instilled as an injection should further enhance the healing response compared to the ADM. However, this needs to be further studied to be able to be widely applicable clinically.