A Preclinical Cadaver Fitting Study of Implantable Biventricular Assist Device - AnyHeart™

A durability study of a paracorporeal pulsatile electro-mechanical pneumatic biventricular assist device

In 2002, the paracorporeal pulsatile electro-mechanical pneumatic ventricular assist device (VAD) began to be developed by the Korea Artificial Organ Center at Korea University under a Health & Medical Technology Research and Development program which finished in 2008. In vitro durability testing was conducted on the paracorporeal pulsatile pneumatic VAD to determine device durability and to evaluate device failures. The 1- and 2-year reliability of the paracorporeal pulsatile pneumatic VAD was shown to be 91.2% and 54.9%, respectively, with an 80% confidence level. Failure modes were analyzed using fault tree analysis, with customized software continuously acquiring data during the test period. After this period, 21 in vivo animal tests were done, with 14 cases of left atrium to left ventricle (LV) inflow cannulation (36Fr)/outflow grafting to descending aorta, and seven cases of apex cannulation of LV to descending aorta (12 mm). The longest postoperative day (182 days) in Korea was recently recorded in in vivo animal testing (bovine, 90 kg, male, 3.5-4.0 L/min flow rate, and 55 bpm).

Ventricular Assist Device Implantation Using a Right Thoracotomy

Most patients needing implantation of a ventricular assist device (VAD) require repeated sternotomy; some after cardiac surgery, and others later for heart transplantation. The purpose of this study was to establish the right thoracotomy technique as an alternative for VAD implantation to reduce repeated sternotomy-related morbidity and mortality. We performed a right thoracotomy in animals, preclinical cadaver fitting tests, and a clinical case. A total of 20 various animals underwent right thoracotomy for implantation of bi-VAD (BVAD, n = 17) and left VAD (LVAD, n = 3). The right chest cavity was entered through the fourth intercostal space with partial resection of the fifth rib. There was no procedure-related morbidity or mortality, except for one calf with right anterior leg paralysis. Preclinical fitting tests were performed on 7 human cadavers to observe the anatomical feasibility of BVAD cannulation from the right side of the heart. In humans, the ascending aorta, interatrial groove, right atrium, and main pulmonary artery were identified as optimal cannula insertion sites for BVAD implantation. A patient with cardiogenic shock underwent a right thoracotomy for implantation of an external LVAD. Cardiac function recovered after 3 weeks, and the device was successfully explanted through a repeat right thoracotomy. In conclusion, a right thoracotomy can be an alternative method to the standard median sternotomy for patients who need repeated sternotomy because of previous cardiac surgery, transplantation at a later date, or those with mediastinal infections.

Optimization of the Circuit Configuration of a Pulsatile ECLS: An In Vivo Experimental Study

An extracorporeal life support system (ECLS) with a conventional membrane oxygenator requires a driving force for the blood to pass through hollow fiber membranes. We hypothesized that if a gravity-flow hollow fiber membrane oxygenator is installed in the circuit, the twin blood sacs of a pulsatile ECLS (the Twin-Pulse Life Support, T-PLS) can be placed downstream of the membrane oxygenator. This would increase pump output by doubling pulse rate at a given pumpsetting rate while maintaining effective pulsatility. The purpose of this study was to determine the optimal circuit configuration for T-PLS with respect to energy and pump output. Animals were randomly assigned to 2 groups in a total cardiopulmonary bypass model. In the serial group, a conventional membrane oxygenator was located between the twin blood sacs of the T-PLS. In the parallel group, the twin blood sacs were placed downstream of the gravity-flow membrane oxygenator. Energy equivalent pressure (EEP), surplus hemodynamic energy (SHE) and pump output were collected at the different pump-setting rates of 30, 40, and 50 beats per minute (BPM). At a given pump-setting rate the pulse rate doubled in the parallel group. Percent changes of mean arterial pressure to EEP were 13.0 +/- 1.7, 12.0 +/- 1.9, and 7.6 +/- 0.9% in the parallel group, while 22.5 +/- 2.4, 23.2 +/- 1.9, and 21.8 +/- 1.4 in the serial group at 30, 40, and 50 BPM of pump-setting rates. SHE at each pump setting rate was 20,131 +/- 1408, 21,739 +/- 2470, and 15,048 +/- 2108 erg/ cm3 in the parallel group, while 33,968 +/- 3001, 38,232 +/- 3281, 37,964 +/- 2693 erg/cm3 in the serial group. Pump output was higher in the parallel circuit at 40, and 50 BPM pump-setting rates (3.1 +/- 0.2, 3.7 +/- 0.2 L/min vs. 2.2 +/- 0.1 and 2.5 +/- 0.1 L/min, respectively, p =0.01). Either parallel or serial circuit configuration of T-PLS generates effective pulsatility. As for the pump out, the parallel circuit configuration provides higher flow than the serial circuit configuration by doubling the pulse rate at a given pump-setting rate.