Design, fabrication, and characterization of a composite scaffold for bone tissue engineering

3D printed porous ceramic scaffolds for bone tissue engineering: a review

This study summarizes the recent research status and development of three-dimensional (3D)-printed porous ceramic scaffolds in bone tissue engineering. Recent literature on 3D-printed porous ceramic scaffolds was reviewed. Compared with traditional processing and manufacturing technologies, 3D-printed porous ceramic scaffolds have obvious advantages, such as enhancement of the controllability of the structure or improvement of the production efficiency. More sophisticated scaffolds were fabricated by 3D printing technology. 3D printed bioceramics have broad application prospects in bone tissue engineering. Through understanding the advantages and limitations of different 3D-printing approaches, new classes of bone graft substitutes can be developed.

Bone Substitute Materials and Minimally Invasive Surgery: A Convergence of Fracture Treatment for Compromised Bone

This article focuses on the understanding of the biochemistry and surgical application of bone substitute materials (BSMs) and particularly the newer calcium phosphate materials that can form a structural orthobiologic matrix within the metaphyseal components of the periarticular bone. Six characteristics of BSMs are detailed that can be used as a guide for the proper selection and application of the optimal BSM type for periarticular fracture repair. These 6 characteristics of BSMs are divided into 2 pillars. One pillar details the 3 biochemical features of BSMs and the other pillar details the 3 surgical application properties.

A polycaprolactone/cuttlefish bone-derived hydroxyapatite composite porous scaffold for bone tissue engineering

Cuttlefish bone (CB) is an attractive natural biomaterial source to obtain hydroxyapatite (HAp). In this study, a porous polycaprolactone (PCL) scaffold incorporating CB-derived HAp (CB-HAp) powder was fabricated using the solvent casting and particulate leaching method. The presence of CB-HAp in PCL/CB-HAp scaffold was confirmed by X-ray diffraction (XRD). Scanning electron microscopy (SEM) and porosity analysis showed that the average pore dimension of the fabricated scaffold was approximately 200-300 μm, with ∼85% porosity, and that the compressive modulus increased after addition of CB-HAp powders. In vitro tests such as cell proliferation assay, cytotoxicity analysis, cell attachment observations, and alkaline phosphatase activity assays showed that the PCL/CB-HAp scaffold could improve the proliferation, viability, adherence, and osteoblast differentiation rate of MG-63 cells. When surgically implanted into rabbit calvarial bone defects, consistent with the in vitro results, PCL/CB-HAp scaffold implantation resulted in significantly higher new bone formation than did implantation of PCL alone. These findings suggest that addition of CB-HAp powder to the PCL scaffold can improve cellular response and that the PCL/CB-HAp composite scaffold has great potential for use in bone tissue engineering.

Physicochemical properties and applications of poly(lactic-co-glycolic acid) for use in bone regeneration

Poly(lactic-co-glycolic acid) (PLGA) is the most often used synthetic polymer within the field of bone regeneration owing to its biocompatibility and biodegradability. As a consequence, a large number of medical devices comprising PLGA have been approved for clinical use in humans by the American Food and Drug Administration. As compared with the homopolymers of lactic acid poly(lactic acid) and poly(glycolic acid), the co-polymer PLGA is much more versatile with regard to the control over degradation rate. As a material for bone regeneration, the use of PLGA has been extensively studied for application and is included as either scaffolds, coatings, fibers, or micro- and nanospheres to meet various clinical requirements.

Evaluating the feasibility of utilizing the small molecule phenamil as a novel biofactor for bone regenerative engineering

Osteoblast cell adhesion and differentiation on biomaterials are important achievements necessary for implants to be useful in bone regenerative engineering. Recombinant bone morphogenetic proteins (BMPs) have been shown to be important for these processes; however, there are many challenges associated with the widespread use of these proteins. A recent report demonstrated that the small molecule phenamil, a diuretic derivative, was able to induce osteoblast differentiation and mineralization in vitro via the canonical BMP signalling cascade (Park et al., 2009). In this study, the feasibility of using phenamil as a novel biofactor in conjunction with a biodegradable poly(lactide-co-glycolide acid) (PLAGA) polymeric scaffold for engineering bone tissue was evaluated. The in vitro cellular behaviour of osteoblast-like MC3T3-E1 cells cultured on PLAGA scaffolds in the presence of phenamil at 10 μM were characterized with regard to initial cell adhesion, proliferation, alkaline phosphatase (ALP) activity and matrix mineralization. The results demonstrate that phenamil supported cell proliferation, promoted ALP activity and facilitated matrix mineralization of osteoblast-like MC3T3-E1 cells. Moreover, in this study, we found that phenamil promoted integrin-mediated cell adhesion on PLAGA scaffolds. It was also shown that phenamil encapsulated within porous, microsphere PLAGA scaffolds retained its osteogenic activity upon release. Based on these findings, the small molecule phenamil has the potential to serve as a novel biofactor for the repair and regeneration of bone tissues.

Optimally porous and biomechanically compatible scaffolds for large-area bone regeneration

Large-area or critical-sized bone defects pose a serious challenge in orthopedic surgery, as all current treatment options present with shortcomings. Bone tissue engineering offers a more promising alternative treatment strategy. However, this approach requires mechanically stable scaffolds that support homogenous bone formation throughout the scaffold thickness. Despite advances in scaffold fabrication, current scaffold-based techniques are unable to support uniform, three-dimensional bone regeneration, and are limited to only the scaffold surface in vitro and in vivo. This is mainly because of inadequate scaffold pore sizes (<200 μm) and accessible pore volume, and the associated limited oxygen diffusion and vascular invasion. In this study, we have adopted a method combining microsphere-sintering and porogen-leaching techniques to fabricate scaffolds with an increased accessible pore volume. Of the scaffolds developed, moderately porous poly(85 lactide-co-15 glycolide) (PLGA) microsphere scaffolds were selected as most advantageous, since they retain mechanical strength in the range of human cancellous bone and display a significantly higher accessible pore volume, which is attributed to an increased percentage of larger pores (i.e., size range 200-600 μm). Unlike control scaffolds with a limited pore size and an accessible pore volume, moderately porous scaffolds displayed increased oxygen diffusion, pre-osteoblast cell infiltration, proliferation, and survival throughout the entire scaffold. Furthermore, moderately porous PLGA microsphere scaffolds displayed enhanced and homogenous mineralization in vitro. Since these newly designed moderately porous scaffolds are weight bearing, are fully osteoconductive, and have the ability to support vascularization, they may serve as effective scaffolds for large-area bone defect repair/regeneration. In addition, this study demonstrates the ability to modulate scaffold porosity and, in turn, to develop oxygen tension-controlled matrices that are effective for large-area bone regeneration.

Differences in Chemical Composition and Internal Structure Influence Systemic Host Response to Implants of Biomaterials

In reconstructive surgery, implantable devices are used to supply a missing function. In tissue engineering, biomaterials serve to guide and eventually deliver cells and/or molecules where a tissue regenerative response is needed. The host organism always reacts to implants of any biomaterial, in some instances even triggering a local cascade of events called the foreign body response (FBR), whose mechanisms are well defined. What has yet to be completely unraveled are the biomarkers systemically mirroring the FBR and the regeneration processes, which would be helpful for assessing the therapeutic efficacy of the bioscaffold. Our goal was to identify a biomarker fingerprint of the systemic reaction of host response to bioscaffold implants.

Different biomaterials chosen for their osteoconductive properties, including collagen, hydroxyapatite, in foam or granules, and poly-ɛ-caprolactone, were implanted in immunocompetent mice. We analyzed serum concentrations of cells and cytokines involved in the inflammatory/immune response, and the histological features of grafts.

Within two weeks after implantation, a wave of proinflammatory cytokines was flowing in the blood stream and the concentration of blood cells changed, revealing specific patterns depending on the chemistry and structure of the implanted biomaterials. Cells secreting pro-inflammatory, chemoactractant, and pro-angiogenic cytokines required for the early events in tissue repair were locally recruited because of the presence of a bioscaffold.