Heuristic optimization of impeller sidewall gaps-based on the bees algorithm for a centrifugal blood pump by CFD

Optimization of a Screw Centrifugal Blood Pump Based on Random Forest and Multi-Objective Gray Wolf Optimization Algorithm

The centrifugal blood pump is a commonly used ventricular assist device. It can replace part of the heart function, pumping blood throughout the body in order to maintain normal function. However, the high shear stress caused by the impeller rotating at high speeds can lead to hemolysis and, as a consequence, to stroke and other syndromes. Therefore, reducing the hemolysis level while ensuring adequate pressure generation is key to the optimization of centrifugal blood pumps. In this study, a screw centrifugal blood pump was used as the research object. In addition, pressure generation and the hemolysis level were optimized simultaneously using a coupled algorithm composed of random forest (RF) and multi-objective gray wolf optimization (MOGWO). After verifying the prediction accuracy of the algorithm, three optimized models were selected and compared with the baseline model in terms of pressure cloud, 2D streamline, SSS distribution, HI distribution, and vortex distribution. Finally, via a comprehensive evaluation, the optimized model was selected as the final optimization design, in which the pressure generation increased by 24% and the hemolysis value decreased by 48%.

CFD Analysis and Optimum Design for a Centrifugal Pump Using an Effectively Artificial Intelligent Algorithm

In this study, we proposed a novel approach to improve centrifugal pump performance with regard to the pump head, pump efficiency, and power. Firstly, to establish constraints, an optimal numerical model that accounted for factors such as pump efficiency and the head was considered. The pump was designed, and an artificial intelligence algorithmic approach was applied to the pump before performing experiments. We considered a set of models by selecting the parameters of the centrifugal pump casing section area, the interference of the impeller, the volute tongue length, and the volute tongue angle. The weights of the factors of safety and displacement on the optimization indices were estimated. The matrix of the weights for the optimal process was less than 38% or greater than 62%. This approach guarantees a complicated multi-objective optimization problem. The results show that the centrifugal pump performances were improved.

Fuzzy-based modeling and speed optimization of a centrifugal blood pump using a modified and constrained Bees algorithm

BACKGROUND AND OBJECTIVE

Side effects that may occur when using blood pumps for treatment of patients are the main limitations on pump rotational speed determination. Efforts are being made to reduce side effects in both design and usage procedures. In determining the pump speed for treatment, decreasing the pressure on the main artery and preserving the valve functions are taken into consideration. In addition to these, the parameters considered for design which include pump efficiency and mechanical effects on blood cells, should also be taken into consideration. In this study, the aim is to obtain the optimum pump speed for the maximum hydraulic efficiency and minimum wall shear stresses that occur inside the pump.

METHODS

Blood pump modeling based on fuzzy logic is created on the hydraulic performance data of a centrifugal blood pump, whose design, CFD analysis, manufacture and experimental testing have been performed previously. Using this fuzzy logic model, the optimum pump speeds were determined using the Bees Algorithm, an intuitive optimization algorithm, in the operating range 1-7 L/min fluid flow rate. In the optimization process, the aim is to achieve minimum shear stress with maximal efficiency. Intravascular pressure limits (90-160 mm-Hg) were set as pressure constraints.

RESULTS

The optimum operating point is obtained as a 3350 rpm pump speed and a 4.35 L/min flow rate. At this operating point, CFD simulation is performed, and maximum wall shear stress was found to be 1458 Pa and its efficiency as 34.2%.

CONCLUSIONS

In addition to the parameters commonly used in the pump speed optimization of blood pumps, the use of wall shear stresses and pump efficiency can provide certain improvements.