Use of Mammalian Liver Cells for Artificial Liver Support

Advances in orthotopic liver transplantation have improved the survival rate of both acute and chronic liver failure patients to nearly 70%. However, the success of this treatment modality has created an international organ shortage. Many patients die while awaiting transplantation in part due to the minimal capacity to store viable transplantable livers beyond 24 h. Additionally, for many areas of the world, routine use of whole liver transplantation to treat liver disease is impractical due to the demands on both financial and technical resources. Potentially, these issues may be alleviated, at least in part, by the use of liver cell transplantation or cellular-based liver assist devices. The well-documented regenerative capacity of the liver may obviate the need for whole organ transplantation in some instances of acute failure, if the patient may be provided temporary metabolic support. Although other patients ultimately may require transplantation, a longer period of time to find a suitable organ for transplantation may be gained by that supportive therapy. The field of liver cell transplantation may offer solutions to patients with inherited metabolic deficiencies or chronic liver disease. The potential to treat an hepatic disorder by using only a fraction of the whole liver would increase the number of whole organs available for orthotopic liver transplantation. Research in the fields of hepatocyte based intra- and extra-corporeal liver support is providing evidence that these therapeutic modalities may ultimately become routine in the treatment of severe liver disease. A historic overview of that technology along with its current status is discussed.

Polymers in cell encapsulation from an enveloped cell perspective

In the past two decades, many polymers have been proposed for producing immunoprotective capsules. Examples include the natural polymers alginate, agarose, chitosan, cellulose, collagen, and xanthan and synthetic polymers poly(ethylene glycol), polyvinyl alcohol, polyurethane, poly(ether-sulfone), polypropylene, sodium polystyrene sulfate, and polyacrylate poly(acrylonitrile-sodium methallylsulfonate). The biocompatibility of these polymers is discussed in terms of tissue responses in both the host and matrix to accommodate the functional survival of the cells. Cells should grow and function in the polymer network as adequately as in their natural environment. This is critical when therapeutic cells from scarce cadaveric donors are considered, such as pancreatic islets. Additionally, the cell mass in capsules is discussed from the perspective of emerging new insights into the release of so-called danger-associated molecular pattern molecules by clumps of necrotic therapeutic cells. We conclude that despite two decades of intensive research, drawing conclusions about which polymer is most adequate for clinical application is still difficult. This is because of the lack of documentation on critical information, such as the composition of the polymer, the presence or absence of confounding factors that induce immune responses, toxicity to enveloped cells, and the permeability of the polymer network. Only alginate has been studied extensively and currently qualifies for application. This review also discusses critical issues that are not directly related to polymers and are not discussed in the other reviews in this issue, such as the functional performance of encapsulated cells in vivo. Physiological endocrine responses may indeed not be expected because of the many barriers that the metabolites encounter when traveling from the blood stream to the enveloped cells and back to circulation. However, despite these diffusion barriers, many studies have shown optimal regulation, allowing us to conclude that encapsulated grafts do not always follow nature's course but are still a possible solution for many endocrine disorders for which the minute-to-minute regulation of metabolites is mandatory.

Improved survival of fulminant liver failure by transplantation of microencapsulated cryopreserved porcine hepatocytes in mice

The aim of this study was to establish hepatocyte isolation in pigs, and to evaluate function of isolated hepatocytes after encapsulation, cryopreservation, and transplantation (Tx) in a mouse model of fulminant liver failure (FLF). After isolation, porcine hepatocytes were microencapsulated with alginate-poly-L-Lysine-alginate membranes and cryopreserved. In vitro, albumin production of free and encapsulated hepatocytes were measured by enzyme linked-immunoadsorbent assay. In vivo, encapsulated hepatocytes were transplanted into different groups of mice with FLF and the following experimental groups were performed: group 1, Tx of empty capsules; group 2, Tx of free primary porcine hepatocytes; group 3, Tx of fresh encapsulated porcine hepatocytes; group 4, Tx of cryopreserved encapsulated porcine hepatocytes. In vitro, fresh or cryopreserved encapsulated porcine hepatocytes showed a continuous decreasing metabolic function over 1 week (albumin and urea synthesis, drug catabolism). In vivo, groups 1 and 2 showed similar survival (18% and 25%, respectively, p > 0.05). In groups 3 and 4, Tx of fresh or cryopreserved encapsulated porcine hepatocytes significantly increased survival rate to 75% and 68%, respectively (p < 0.05). Primary porcine hepatocytes maintained metabolic functions after encapsulation and cryopreservation. In mice with FLF, Tx of encapsulated xenogeneic hepatocytes significantly improved survival. These results indicate that porcine hepatocytes can successfully be isolated, encapsulated, stored using cryopreservation, and transplanted into xenogeneic recipients with liver failure and sustain liver metabolic functions.

What clinical alternatives to whole liver transplantation? Current status of artificial devices and hepatocyte transplantation

Shortage of organ donors limits the number of possible liver transplantations. Alternative therapies for treatment of liver failure are currently being developed: (i) extracorporeal artificial liver devices; (ii) bioartificial liver devices using hepatocytes; and (iii) hepatocyte transplantation. The objective of these strategies is to bridge patients with liver failure until a suitable liver allograft is obtained for transplantation or the patient's own liver regenerates sufficiently to resume normal function. In this review, we discuss these strategies and summarize the current status of clinical experience.

Alginate-chitosan complex coacervation for cell encapsulation: effect on mechanical properties and on long-term viability

The use of chitosan in complexation with alginate appears to be a promising strategy for cell microencapsulation, due to the biocompatibility of both polymers and the high mechanical properties attributed by the use of chitosan. The present work focuses on the optimization and characterization of the alginate-chitosan system to achieve long-term cell encapsulation. Microcapsules were prepared from four types of chitosan using one- and two-stage encapsulation procedures. The effect of reaction time and pH on long-term cell viability and mechanical properties of the microcapsules was evaluated. Using the single-stage encapsulation procedure led to increase of at least fourfold in viability compared with the two-stage procedure. Among the four types of chitosan, the use of high molecular weight (MW) chitosan glutamate and low MW chitosan chloride provided high viability levels as well as good mechanical properties, i.e., more than 93% intact capsules. The high viability levels were found to be independent of the reaction conditions when using high MW chitosan. However, when using low MW chitosan, better viability levels (195%) were obtained when using a pH of 6 and a reaction time of 30 min. An alginate-chitosan cell encapsulation system was devised to achieve high cell viability levels as well as to improve mechanical properties, thus holding great potential for future clinical application.

Immunocompatibility and biocompatibility of cell delivery systems

Immunoisolation therapy overcomes important disadvantages of implanting free cells. By mechanically blocking immune attacks, synthetic membranes around grafted cells should obviate the need for immunosuppression. The membrane used for encapsulation must be biocompatible and immunocompatible to the recipient and also to the encapsulated graft. The ability of the host to accept the implanted graft depends not only on the material used for encapsulation, but also on the defense reaction of the recipient, which is very individual. Such a reaction usually starts as absorption of cell-adhesive proteins, immunoglobulins, complement components, growth factors and some other proteins on the surface of the device. The absorption of proteins is difficult to avoid, but the amount and specificity of absorbed proteins can be controlled to some extent by selection and modification of the device material. If the adsorption of proteins to the surface of the implanted material is reduced, the overgrowth of the device with fibroblast-like and macrophage-like cells is also reduced. Cell adhesion at the surface of the implanted device is, in addition to the selected polymeric material, greatly influenced by the device content. Xenografts trigger a more vigorous inflammatory reaction than allografts, most probably due to the release of antigenic products from encapsulated deteriorated and dying cells which diffuse through the membrane and activate adhering immune cells. There is an evident effect of autoimmune status on the fate of the encapsulated graft. While encapsulated xenogeneic islets readily reverse streptozotocin-induced diabetes in mice, the same xenografts are short-functioning in NOD autoimmune diabetes-prone mice. Autoantibodies, to which most devices are impermeable, are not involved. Among the cytotoxic factors which are responsible for the limited survival of the encapsulated graft the most important are cytokines and perhaps some other low-molecular-weight factors released by activated macrophages at the surface of the encapsulating membrane.

Chitosan-polyvinyl pyrrolidone hydrogels as candidate for islet immunoisolation: in vitro biocompatibility evaluation

The success of immunoisolation devices for islet transplantation depends on the nature of semipermeable membranes, which permit the crossover of micronutrients, glucose, and insulin and prevent the entry of immunocytes and other transplant rejection mechanisms. In the present study we examined the properties of chitosan-polyvinyl pyrrolidone (PVP) hydrogels for possible application as an immunoisolation device. Hydrogels with two different proportions of chitosan-PVP (M1 1:1 and M2 2:1, v/v) were synthesized by cross-linking with glutaraldehyde. Hydrogels were characterized for their hydrophilic nature, protein adsorption, diffusion properties, cytotoxicity, and islet compatibility. Hydrogel membranes were found to be hydrophilic as determined by high octane contact angle value (M1: 142.9 +/- 0.46; M2: 143.6 +/- 0.49). Protein adsorption on the hydrogels was found to be low (0.0143 +/- 0.0027 mg for M1 and 0.0136 +/- 0.0049 mg for M2) compared to tissue culture polystyrene (TCPS) (0.0434 +/- 0.001 mg) and pure chitosan (0.0214 +/- 0.0025 mg) control. Hydrogel M1 was tested as a representative for diffusion studies. M1 allowed regulated transport of insulin and did not allow anti-insulin antibodies to pass through. In vitro biocompatibility of M1 and M2 was found to be excellent with no cytotoxic effects on the HeLa cells as determined by MTT and NR assay. Mouse islets cultured on the hydrogel membranes retained their integrity and intact morphology as assessed by image analysis study. Viability of islets cultured on hydrogels was comparable to that of controls (M1: 97%; M2: 90.4%) as assessed by trypan blue dye exclusion test. Islets retained their functionality when cultured on hydrogels, as judged by insulin secretion in response to glucose challenge (16.0 mM). Although in vivo experiments are awaited, the present study provides sufficient documentation to consider chitosan-PVP membranes as potential candidates for immunoisolation of islets.

Use of mammalian liver cells for artificial liver support

Advances in orthotopic liver transplantation have improved the survival rate of both acute and chronic liver failure patients to nearly 70%. However, the success of this treatment modality has created an international organ shortage. Many patients die while awaiting transplantation in part due to the minimal capacity to store viable transplantable livers beyond 24 h. Additionally, for many areas of the world, routine use of whole liver transplantation to treat liver disease is impractical due to the demands on both financial and technical resources. Potentially, these issues may be alleviated, at least in part, by the use of liver cell transplantation or cellular-based liver assist devices. The well-documented regenerative capacity of the liver may obviate the need for whole organ transplantation in some instances of acute failure, if the patient may be provided temporary metabolic support. Although other patients ultimately may require transplantation, a longer period of time to find a suitable organ for transplantation may be gained by that supportive therapy. The field of liver cell transplantation may offer solutions to patients with inherited metabolic deficiencies or chronic liver disease. The potential to treat an hepatic disorder by using only a fraction of the whole liver would increase the number of whole organs available for orthotopic liver transplantation. Research in the fields of hepatocyte based intra- and extra-corporeal liver support is providing evidence that these therapeutic modalities may ultimately become routine in the treatment of severe liver disease. A historic overview of that technology along with its current status is discussed.