Electrochemically generated bimetallic reductive mediator Cu1+[Ni2+(CN)4]1- for the degradation of CF4 to ethanol by electro-scrubbing

Enhanced sustainable electro-generation of a Ni (I) homogeneous electro-catalyst at a silver solid amalgam electrode for the continuous degradation of N2O, NO, DCM, and CB pollutants

This paper reports the sustainable and enhanced generation of a Ni(I) active electro-catalyst using AgSAE as a cathode material for the sustainable degradation of N₂O, NO, dichloromethane (DCM), and chlorobenzene (CB) by electroscrubbing in a series operation. The AgSAE electrode showed 1.66 times higher Ni(I) formation than the Ag metal electrode. The AgSAE achieved 20% ± 2% Ni(I) generation in a highly concentrated alkaline medium, whereas Ag metal only achieved 12% ± 2% Ni(I) generation at the same current density. Electrochemical impedance spectroscopy and voltammetric studies determined that the kinetics of the charge-transfer reaction was also preferential at the AgSAE, with the cathodic peak at -1.26 V vs. Ag/AgCl confirming Ni(I) formation. Initially, the change in the oxygen reduction potential and reduction efficiency of Ni(I) confirmed the removal of N₂O, NO, DCM and CB. In addition, the gas Fourier transform infrared (FTIR) spectrum revealed 99.8% removal efficiency of toxic pollutants. Therefore, the regeneration of Ni(I) confirmed the sustainable removal of toxic pollutants. Furthermore, the FTIR spectra revealed the formation of NH₃ during the reduction of N₂O and NO. On the other hand, DCM and CB were reduced to benzene derivatives in the solution phase. In addition, a plausible reduction mechanism was derived. As a result, the AgSAE cathode exhibited two-fold higher removal efficiency of N₂O, NO, DCM, and CB than the previously reported electrodes.

Cobalt mediated electro-scrubbers for the degradation of gaseous perchloroethylene

This work focuses on the treatment of gaseous perchloroethylene (PCE) using electro-scrubbing with diamond electrodes and cobalt mediators. PCE was obtained by direct desorption from an aqueous solution containing 150 mg L^-1, trying to a real pollution case. The electro-scrubber consisted of a packed absorption column connected with an undivided electrochemical cell. Diamond anodes supported on two different substrates (tantalum and silicon) were used and the results indicated that Ta/BDD was more successful in the production of Co (III) species and in the degradation of PCE. Three experimental systems were studied for comparison purposes: absorbent free of Co (III) precursors, absorbent containing Co (III) precursors, and absorbent containing Co (III) precursors undergoing previous electrolysis to the electro-scrubbing to facilitate the accumulation of oxidants. The most successful option was the last, confirming the important role of mediated electrochemical processes in the degradation of PCE. Trichloroacetic acid (TCA) and carbon tetrachloride (CCl₄) were found as the primary reaction products and ethyl chloroacetate esters were also identified. A comprehensive mechanism of the processes happening inside electro-scrubber is proposed.