Stabilisation of municipal solid waste after autoclaving in a passively aerated bioreactor

Can the biological stage of a mechanical-biological treatment plant that is designed for mixed municipal solid waste be successfully utilized for effective composting of selectively collected biowaste?

Although the requirements for overall recycling rates can only be met when organic recycling is not overlooked, information is scarce regarding adaption to biowaste composting of existing mechanical-biological treatment (MBT) plants originally designed for stabilization of organic municipal solid waste (OFMSW). Thus, this study aimed to assess the suitability of the operational conditions in the biological part of a full-scale MBT plant now used for stabilization of OFMSW (working line: closed-module-covered-pile-open-pile) with a view to producing compost from biowaste. Temperatures above 75 °C were maintained in the closed module and reached again in the covered pile, indicating that intensive organic-matter mineralization occurred in both stages. In the covered pile, the temperature sharply decreased, indicating depletion of easily biodegradable organic matter. An aerobic 4-day respiration test (AT4) value below 10 mg O₂/g dry matter, the cut-off for assessing compost stability, was obtained after 8 weeks. However, a high content of humic substances (HS), reflecting compost maturity, was obtained only after 120 days. The increase in HS content proceeded in two phases. In the first phase (45-84 day), the rate constant and the rate of HS formation were lower than in the second phase (84-120 day) (0.072 vs. 0.087 day^-1, 1.97 vs. 3.06 mg C/(g organic matter·d)). All the above-mentioned indicators and the nutrient content (N, P, K, Mg, Ca) in the compost indicates that the biological stage of an MBT plant can successfully treat biowaste. This is in accordance with a circular economy and will contribute to increasing recycling rates.

Mesophilic and Thermophilic Anaerobic Digestion of Organic Fraction Separated during Mechanical Heat Treatment of Municipal Waste

The objective of this study was to investigate the effect of process temperature on semi-continuous anaerobic digestion of the organic fraction separated during autoclaving of municipal waste. Tests were carried out in reactors with full mixing. Biogas production was higher in thermophilic conditions than in mesophilic conditions (0.92 L/g volatile solids at 55 °C vs. 0.42 L/g volatile solids at 37 °C, respectively). The resulting methane yields were 0.25-0.32 L CH4/g VS and 0.56–0.70 L CH4/g VS in mesophilic and thermophilic conditions, respectively. In both variants, the methane share was over 70% v/v. This work also discusses the potential impact of Maillard compounds on the efficiency of the fermentation process, which were probably produced during the process of autoclaving of municipal waste. These results indicate that, after autoclaving, the organic fraction of municipal waste can be an effective substrate for anaerobic digestion in thermophilic conditions.

Robust microorganisms for biofuel and chemical production from municipal solid waste

Background

Worldwide 3.4 billion tonnes of municipal solid waste (MSW) will be produced annually by 2050, however, current approaches to MSW management predominantly involve unsustainable practices like landfilling and incineration. The organic fraction of MSW (OMSW) typically comprises ~ 50% lignocellulose-rich material but is underexplored as a biomanufacturing feedstock due to its highly inconsistent and heterogeneous composition. This study sought to overcome the limitations associated with studying MSW-derived feedstocks by using OMSW produced from a realistic and reproducible MSW mixture on a commercial autoclave system. The resulting OMSW fibre was enzymatically hydrolysed and used to screen diverse microorganisms of biotechnological interest to identify robust species capable of fermenting this complex feedstock.

Results

The autoclave pre-treated OMSW fibre contained a polysaccharide fraction comprising 38% cellulose and 4% hemicellulose. Enzymatic hydrolysate of OMSW fibre was high in d-glucose (5.5% w/v) and d-xylose (1.8%w/v) but deficient in nitrogen and phosphate. Although relatively low levels of levulinic acid (30 mM) and vanillin (2 mM) were detected and furfural and 5-hydroxymethylfurfural were absent, the hydrolysate contained an abundance of potentially toxic metals (0.6% w/v). Hydrolysate supplemented with 1% yeast extract to alleviate nutrient limitation was used in a substrate-oriented shake-flask screen with eight biotechnologically useful microorganisms (Clostridium saccharoperbutylacetonicum, Escherichia coli, Geobacillus thermoglucosidasius, Pseudomonas putida, Rhodococcus opacus, Saccharomyces cerevisiae, Schizosaccharomyces pombe and Zymomonas mobilis). Each species’ growth and productivity were characterised and three species were identified that robustly and efficiently fermented OMSW fibre hydrolysate without significant substrate inhibition: Z. mobilis, S. cerevisiae and R. opacus, respectively produced product to 69%, 70% and 72% of the maximum theoretical fermentation yield and could theoretically produce 136 kg and 139 kg of ethanol and 91 kg of triacylglycerol (TAG) per tonne of OMSW.

Conclusions

Developing an integrated biorefinery around MSW has the potential to significantly alleviate the environmental burden of current waste management practices. Substrate-oriented screening of a representative and reproducible OMSW-derived fibre identified microorganisms intrinsically suited to growth on OMSW hydrolysates. These species are promising candidates for developing an MSW biorefining platform and provide a foundation for future studies aiming to valorise this underexplored feedstock.