Environmental impact assessment of organic fraction of municipal solid waste treatment by anaerobic digestion in Sri Lanka

Smart technological options in collection and transportation of municipal solid waste in urban areas: A mini review

The rapid increase in quantities and the mismanagement of municipal solid waste (MSW) in developing countries are increasing the environmental impacts such as air, water and soil contamination. The present scenario of MSW management deals with numerous issues such as lack of technological resources, strategical management, social awareness, public participation, etc. Globally, numerous efforts in the form of new policies, schemes and regulatory acts have been made to develop a systematic collection and transportation (C&T) method using advanced, integrated technologies. However, very few studies have addressed this issue for low- and middle-income countries due to the lack of availability of reliable resources and data sets. This paper addresses the present challenges in C&T methods and highlights the application of information communication technology in monitoring, capturing, data management, planning, live tracking and communication. This systematic mini-review is based on the availability of technical resources, consumer acceptance and cost-effectiveness of different technologies in managing the processes. The study revealed that the C&T methods in most developed countries are designed based on their geographical stretch, climatic factors, waste characteristics and compatible technology, resulting in sustainable MSW management. However, developing countries have followed the same monotonous approach in managing their MSW, which fails in C&T process. The case study provides a valuable resource for researchers and policymakers to frame a better C&T process based on the recent technological interventions, infrastructure development, and social and economic status.

Implementation of anaerobic digestion for valorizing the organic fraction of municipal solid waste in developing countries: Technical insights from a systematic review

Anaerobic digestion (AD) as a waste management strategy for the organic fraction of municipal waste (OFMSW) has received attention in developed countries for several decades, leading to the development of large-scale plants. In contrast, AD of OFMSW has only recently drawn attention in developing countries. This systematic review was carried out to investigate the implementation of AD to treat the OFMSW in developing countries, focusing on assessing pilot and full-scale AD plants reported in the last ten years. Studies that met the selection criteria were analyzed and data regarding operating parameters, feedstock characteristics, and biogas, digestate, and energy production were extracted. As outlined in this systematic review, AD plants located in developing countries are mostly one-stage mesophilic systems that treat OFMSW via mono-digestion, almost exclusively with the aim of producing electrical energy. Based on the analysis done throughout this systematic review, it was noted that there is a large difference in the maturity level of AD systems between developing and developed countries, mainly due to the economic capacity of developed countries to invest in sustainable waste management systems. However, the number of AD plants reported in scientific papers is significantly lower than the number of installed AD systems. Research articles regarding large-scale implementation of AD to treat OFMSW in developed countries were analyzed and compared with developing countries. This comparison identified practices used in plants in developed countries that could be utilized in the large-scale implementation and success of AD in developing countries. These practices include exploiting potential products with high market-values, forming partnerships with local industries to use industrial wastes as co-substrates, and exploring different biological and physical pretreatment technologies. Additionally, the analysis of capital and operational costs of AD plants showed that costs tend to be higher for developing countries due to their need to import of materials and equipment from developed countries. Technical, economical, and political challenges for the implementation of AD at a large-scale in developing countries are highlighted.

A Critical Review of Data Science Applications in Resource Recovery and Carbon Capture from Organic Waste

Municipal and agricultural organic waste can be treated to recover energy, nutrients, and carbon through resource recovery and carbon capture (RRCC) technologies such as anaerobic digestion, struvite precipitation, and pyrolysis. Data science could benefit such technologies by improving their efficiency through data-driven process modeling along with reducing environmental and economic burdens via life cycle assessment (LCA) and techno-economic analysis (TEA), respectively. We critically reviewed 616 peer-reviewed articles on the use of data science in RRCC published during 2002-2022. Although applications of machine learning (ML) methods have drastically increased over time for modeling RRCC technologies, the reviewed studies exhibited significant knowledge gaps at various model development stages. In terms of sustainability, an increasing number of studies included LCA with TEA to quantify both environmental and economic impacts of RRCC. Integration of ML methods with LCA and TEA has the potential to cost-effectively investigate the trade-off between efficiency and sustainability of RRCC, although the literature lacked such integration of techniques. Therefore, we propose an integrated data science framework to inform efficient and sustainable RRCC from organic waste based on the review. Overall, the findings from this review can inform practitioners about the effective utilization of various data science methods for real-world implementation of RRCC technologies.

Assessment of the environmental sustainability of municipal solid waste valorization by anaerobic digestion and by composting in Sri Lanka

Municipal solid waste management (MSWM) remains a major concern in Sri Lanka, and various treatment methods have been deployed. Though both composting and anaerobic digestion have been effective in environmental decontamination, there are other environmental issues that should be assessed. This study aimed to evaluate the environmental impacts of a full-scale composting plant and an anaerobic digestion plant for managing the organic fraction of municipal solid waste (OFMSW) in Sri Lanka using life cycle assessment (LCA). The results show that OFMSW composting causes unfavourable environmental impacts on damage categories such as human health (6.77 × 10-4 disability-adjusted life years (DALY) tonne-1 OFMSW), ecosystem quality (1.90 × 10-6 species.year tonne-1 OFMSW), and resource scarcity (3.66 × 10-1 United States Dollar (USD) tonne-1 OFMSW). Anaerobic digestion also leads to unfavourable impacts on human health (2.13 × 10-4 DALY tonne-1 OFMSW) and ecosystem quality (6.46 × 10-7 species.year tonne-1 OFMSW). However, the impact on resource scarcity (-3.85 × 10-2 USD tonne-1 OFMSW) was avoided due to electricity production via anaerobic digestion. Specifically, the treatment of OFMSW by anaerobic digestion resulted in a reduction by 68.3% in the total environmental load as compared to composting. It can be concluded that out of the two existing systems investigated, anaerobic digestion has a more favourable environmental impact than composting.

A review of advances in valorization and post-treatment of anaerobic digestion liquid fraction effluent

Traditionally, digestate is considered a waste, which is used as fertiliser in the agriculture industry. Recent studies focus on increasing the profitability of digestate by extracting reusable nutrients to promote biogas plants cost-effectiveness, sustainable management and circular economy. This review focuses on the post-treatment and valorization of liquor which is produced by solid-liquid fractioning of digestate. Nutrient recovery and removal from liquor are possible through mechanical, physicochemical and biological procedures. The processes discussed involve complex procedures that differ in economic value, feasibility, legislative restrictions and performance. The parameters that should be considered to employ these techniques are influenced by liquor characteristics, topography, climate conditions and available resources. These are key parameters to keep in mind during designing and manufacturing a biogas plant. In the following chapters, a discussion on available liquor treatment methods takes place. The present study examines the critical aspects of the available liquor treatment methods.