Chemical recycling: A critical assessment of potential process approaches

Strategies to enhance the circularity of non-bottle PET packaging waste based on a detailed material characterisation

The compositions of Dutch lightweight packaging waste (LWP) and sorted products named "PET (Polyethylene terephthalate) trays" have been determined on object level. Additionally, the PET trays from both waste types were sorted in 16 categories representing their packaging use and material build-up. The material composition of at least 10 representative trays from each category was determined with chemical and thermal analysis, based on which the average material composition per category was established. Based on this data the average material composition of sorted PET tray products was approximated. The recyclability of the various categories of PET trays was assessed based on their material build-up. The most ubiquitous PET trays in Dutch LWP and sorted products were only found to be suitable to produce opaque recycled PET with mechanical recycling processes. Whereas only some more uncommon PET trays can be used to produce transparent recycled PET with mechanical recycling processes. Depolymerisation is deemed to be a more appropriate recycling process that will allow the production of transparent food-grade recycled PET.

Demystifying group-4 polyolefin hydrogenolysis catalysis. Gaseous propane hydrogenolysis mechanism over the same catalysts

A kinetic/mechanistic investigation of gaseous propane hydrogenolysis over the single-site heterogeneous polyolefin depolymerization catalysts AlS/ZrNp2 and AlS/HfNp2 (AlS = sulfated alumina, Np = neopentyl), is use to probe intrinsic catalyst properties without the complexities introduced by time- and viscosity-dependent polymer medium effects. In a polymer-free automated plug-flow catalytic reactor, propane hydrogenolysis turnover frequencies approach 3,000 h-1 at 150 °C. Both catalysts exhibit approximately linear relationships between rate and [H2] at substoichiometric [H2] with rate law orders of 0.66 ± 0.09 and 0.48 ± 0.07 for Hf and Zr, respectively; at higher [H2], the rates approach zero-order in [H2]. Reaction orders in [C3H8] and [catalyst] are essentially zero-order under all conditions, with the former implying rapid, irreversible alkane binding/activation. This rate law, activation parameter, and DFT energy span analysis support a scenario in which [H2] is pivotal in one of two plausible and competing rate-determining transition states-bimolecular metal-alkyl bond hydrogenolysis vs. unimolecular β-alkyl elimination. The Zr and Hf catalyst activation parameters, ΔH‡ = 16.8 ± 0.2 kcal mol-1 and 18.2 ± 0.6 kcal mol-1, respectively, track the relative turnover frequencies, while ΔS‡ = -19.1 ± 0.8 and -16.7 ± 1.4 cal mol-1 K-1, respectively, imply highly organized transition states. These catalysts maintain activity up to 200 °C, while time-on-stream data indicate multiday activities with an extrapolated turnover number ~92,000 at 150 °C for the Zr catalyst. This methodology is attractive for depolymerization catalyst discovery and process optimization.

Waste LCA and the future

Life cycle assessment (LCA) models quantifying the environmental aspects of waste management have become an integral part of waste management decision-making over the last two decades and have provided ample knowledge on both environmental benefits and drawbacks in the way we handle waste. Waste management and LCA modelling of waste management systems will soon be challenged by profound changes necessary in our societies and sectors to meet sustainable development goals. Foreseen changes in energy, material, and nutrient provision will directly and indirectly affect waste management in terms of its operation and goals. This study reflects on anticipated changes in society and industrial sectors and how these changes may affect waste management and LCA modelling of waste management systems in terms of waste input, the modelling of technologies and systems and exchanges of energy, materials, and nutrients, as well as how it may affect impact assessment and the interpretation of results. The study provides practical recommendations for LCA modelling of future waste management systems, which will hopefully lead to robust assessments that can support decision-making in an evolving society subject to great changes.

Prospects for Recyclable Multilayer Packaging: A Case Study

Food preservation is an essential application for polymers, particularly in packaging. Complex multilayer films, such as those used for modified atmosphere packaging (MAP), extend the shelf life of sensitive foods. These mostly contain various polymers to achieve the necessary combination of mechanic, optic, and barrier properties that limit their recyclability. As the European Union's Circular Economy Action Plan calls for sustainable products and business models, including waste prevention policies and recycling quotas, with plastic packaging being a high priority, solutions towards more sustainable multilayer packaging are urgently needed. This study evaluated and compared the recycling potential of functionally equivalent PET (polyethylene terephthalate) and PP (polypropylene) post-consumer MAP through structure analysis and recycling simulation. The structure analysis revealed that both types of MAP contained functional (stability) and barrier layers (oxygen and moisture). The recycling simulation showed that the PP-based packaging was recyclable 10 times, maintaining its mechanical properties and functionality. At the same time, the PET-based MAP resulted in a highly brittle material that was unsuitable for reprocessing into similar economic value products. The secondary material from the PP-based MAP was successfully manufactured into films, demonstrating the functional possibility of closed-loop recycling. The transition from a linear to a circular economy for MAP is currently still limited by safety concerns due to a lack of sufficient and efficient purification methods, but the proper design of multilayers for recyclability is a first step towards circularity.

Upcycling of thermosetting polymers into high-value materials

Thermosetting polymers, a large class of polymers featuring excellent properties, have been widely used and play an irreplaceable role in our life. Nevertheless, they are arduous to be recycled or reused on account of their permanently cross-linked networks, and the main recycling approaches used currently include energy recovery through incineration, utilization as fillers after mechanical grinding, and pyrolysis, which only reclaim a small fraction or partial value of thermosetting polymers and their downstream materials. In this minireview, we provide an overview of the efforts undertaken towards upcycling thermosetting polymers in recent years. The research progress on physical upcycling, carbonization, solvolysis and vitrimerization of thermoset waste to high-value materials, including oil-water separation materials, 3D printable materials, functional carbon materials (supercapacitors, photothermal conversion materials, and catalytic materials), additives, emulsifiers, biolubricants, and vitrimers, are summarized and discussed. Perspectives on the future development of the art of upcycling thermosets are also provided.

WILL WE BE ABLE TO USE RECYCLED PLASTICS OR SHALL WE DECIDE FOR PACKAGING FREE PRODUKCTION?

Recycled plastic and its use are imperative for preserving the environment, including proper plastic wash-out. Will we ever be able to push the Czech population and firms to use recycled material? Or is it happening spontaneously? A questionnaire created on Google Forms involves ten legislative and motivational questions comprising relevant data on the amount of plastic in municipal waste between 2010 and 2020 from the Czech Statistical Office. We found that the population understands the importance of using recycled material and recycled plastic without the government's impulse. Despite the high capital intensity, the state should impose taxes to protect the sustainable environment. We suggest a comprehensive and in-depth survey to acquire more accurate data.

Increasing the Circularity of Packaging along Pharmaceuticals Value Chain

Pharmaceutical packaging is a complex group of products, the main purpose of which is to protect the medicine and forward information. Pharmaceutical packaging waste is generated and accumulated along the various phases and practices of the value chain. In general, the amount of packaging has been growing during the increasing political pressure to reduce waste and to increase the circulation of materials. The goals and solutions are expected to be found in the circular economy; however, the literature on circular pharmaceutical packaging is lacking. This study explores the key factors when promoting the circularity of pharmaceutical packaging along its value chain. This was conducted by reviewing the legislation, elaborating the value chain and analysing the data from focus group discussions with stakeholders. The results show that various barriers, such as legislation, a lack of information or interaction between stakeholders, but also rigid practices, block product design for circularity. In the developing circularity of packaging, the causal links along the value chain must be understood. Chemical recycling technologies are expected to resolve the challenges of maintaining clean cycles. Further studies are needed to demonstrate the environmental benefits of increasing circularity along the value chain of pharmaceutical packaging.