A Comprehensive Review on Starch-Based Hydrogels: From Tradition to Innovation, Opportunities, and Drawbacks

Natural hydrogels based on renewable and inexpensive sources, such as starch, represent an interesting group of biopolymeric materials with a growing range of applications in the biomedical, cosmeceutical, and food sectors. Starch-based hydrogels have traditionally been produced using different processes based on chemical or physical methods. However, the long processing times, high energy consumption, and safety issues related to the synthesis of these materials, mostly causing severe environmental damage, have been identified as the main limitations for their further exploitation. Therefore, the main scientific challenge for research groups is the development of reliable and sustainable processing methods to reduce the environmental footprint, as well as investigating new low-cost sources of starches and individuating appropriate formulations to produce stable hydrogel-based products. In the last decade, the possibility of physically modifying natural polysaccharides, such as starches, using green or sustainable processing methods has mostly been based on nonthermal technologies including high-pressure processing (HPP). It has been demonstrated that the latter exerts an important role in improving the physicochemical and techno-functional properties of starches. However, as for surveys in the literature, research activities have been devoted to understanding the effects of physical pre-treatments via high-pressure processing (HPP) on starch structural modifications, more so than elucidating its role and capacity for the rapid formation of stable and highly structured starch-based hydrogels with promising functionality and stability, utilizing more sustainable and eco-friendly processing conditions. Therefore, the present review addresses the recent advancements in knowledge on the production of sustainable starch-based hydrogels utilizing HPP as an innovative and clean-label preparation method. Additionally, this manuscript has the ambition to give an updated overview of starch-based hydrogels considering the different types of structures available, and the recent applications are proposed as well to critically analyze the main perspectives and technological challenges for the future exploitation of these novel structures.

Green Chemistry Principles for Nano- and Micro-Sized Hydrogel Synthesis

The growing demand for drug carriers and green-technology-based tissue engineering materials has enabled the fabrication of different types of micro- and nano-assemblies. Hydrogels are a type of material that have been extensively investigated in recent decades. Their physical and chemical properties, such as hydrophilicity, resemblance to living systems, swelling ability and modifiability, make them suitable to be exploited for many pharmaceutical and bioengineering applications. This review deals with a brief account of green-manufactured hydrogels, their characteristics, preparations, importance in the field of green biomedical technology and their future perspectives. Only hydrogels based on biopolymers, and primarily on polysaccharides, are considered. Particular attention is given to the processes of extracting such biopolymers from natural sources and the various emerging problems for their processing, such as solubility. Hydrogels are catalogued according to the main biopolymer on which they are based and, for each type, the chemical reactions and the processes that enable their assembly are identified. The economic and environmental sustainability of these processes are commented on. The possibility of large-scale processing in the production of the investigated hydrogels are framed in the context of an economy aimed at waste reduction and resource recycling.

A Review of Sustained Drug Release Studies from Nanofiber Hydrogels

Polymer nanofibers have exceptionally high surface area. This is advantageous compared to bulk polymeric structures, as nanofibrils increase the area over which materials can be transported into and out of a system, via diffusion and active transport. On the other hand, since hydrogels possess a degree of flexibility very similar to natural tissue, due to their significant water content, hydrogels made from natural or biodegradable macromolecular systems can even be injectable into the human body. Due to unique interactions with water, hydrogel transport properties can be easily modified and tailored. As a result, combining nanofibers with hydrogels would truly advance biomedical applications of hydrogels, particularly in the area of sustained drug delivery. In fact, certain nanofiber networks can be transformed into hydrogels directly without the need for a hydrogel enclosure. This review discusses recent advances in the fabrication and application of biomedical nanofiber hydrogels with a strong emphasis on drug release. Most of the drug release studies and recent advances have so far focused on self-gelling nanofiber systems made from peptides or other natural proteins loaded with cancer drugs. Secondly, polysaccharide nanofiber hydrogels are being investigated, and thirdly, electrospun biodegradable polymer networks embedded in polysaccharide-based hydrogels are becoming increasingly popular. This review shows that a major outcome from these works is that nanofiber hydrogels can maintain drug release rates exceeding a few days, even extending into months, which is an extremely difficult task to achieve without the nanofiber texture. This review also demonstrates that some publications still lack careful rheological studies on nanofiber hydrogels; however, rheological properties of hydrogels can influence cell function, mechano-transduction, and cellular interactions such as growth, migration, adhesion, proliferation, differentiation, and morphology. Nanofiber hydrogel rheology becomes even more critical for 3D or 4D printable systems that should maintain sustained drug delivery rates.

Cellulose-based hydrogel materials: chemistry, properties and their prospective applications

Hydrogels based on cellulose comprising many organic biopolymers including cellulose, chitin, and chitosan are the hydrophilic material, which can absorb and retain a huge proportion of water in the interstitial sites of their structures. These polymers feature many amazing properties such as responsiveness to pH, time, temperature, chemical species and biological conditions besides a very high-water absorption capacity. Biopolymer hydrogels can be manipulated and crafted for numerous applications leading to a tremendous boom in research during recent times in scientific communities. With the growing environmental concerns and an emergent demand, researchers throughout the globe are concentrating particularly on naturally derived hydrogels due to their biocompatibility, biodegradability and abundance. Cellulose-based hydrogels are considered as useful biocompatible materials to be used in medical devices to treat, augment or replace any tissue, organ, or help function of the body. These hydrogels also hold a great promise for applications in agricultural activity, as smart materials and some other useful industrial purposes. This review offers an overview of the recent and contemporary research regarding physiochemical properties of cellulose-based hydrogels along with their applications in multidisciplinary areas including biomedical fields such as drug delivery, tissue engineering and wound healing, healthcare and hygienic products as well as in agriculture, textiles and industrial applications as smart materials.

Cell viability and hemocompatibility evaluation of a starch-based hydrogel loaded with hydroxyapatite or calcium carbonate for maxillofacial bone regeneration

The objective of this study is to evaluate the cell viability and hemocompatibility of starch-based hydrogels for maxillofacial bone regeneration. Seven starch-based hydrogels were prepared: three loaded with 0.5, 1 and 2% calcium carbonate (Sigma Aldrich, St. Louis, MO, USA); three loaded with 2, 3 and 4% hydroxyapatite (Sigma Aldrich); and one not loaded as a control. A 10 M NaOH was then added to induce hydrogel formation. Human osteoblasts were cultured on each hydrogel for 72 h. An MTS assay (Cell Titer96; PROMEGA, Madison, WI, USA) was used to assess cell viability. Hemocompatibility testing was conducted with normal human blood in the following conditions: 100 mg of each hydrogel in contact with 900 µL of whole blood for 15 min at 37 °C under lateral stirring. Higher percentages of cell viability were observed in starch-based hydrogels loaded with hydroxyapatite as compared with the control. The hemolysis test showed a hemolysis level lower than 2%. Activated partial thromboplastin time and prothrombin time were unchanged, while platelet counting showed a slight decrease when compared with controls.

Starch and its Derived Products: Biotechnological and Biomedical Applications

Starches are one of the most abundant renewable natural resources available to us, however their potential as a biomass feedstock for the production of a vast range of commercially viable chemicals/components for application in many areas of industrial, food and biomedical sciences is currently under-exploited. This review begins by presenting an overview of starch sources, composition and structure, and physicochemical characteristics. Specific topics discussed include amylose and amylopectin structure, their location in the amorphous and crystalline regions of starch granules, granule morphology, gelatinisation and pasting characteristics. The remainder of the review then focuses upon the biotechnological production of starch hydrolysis products, such as maltodextrins, glucose and fructose syrups, and cyclodextrins, and the chemical modification of starch, namely, oxidation, stabilisation (esterification and etherification), and cross-linking. Finally some specific examples of the development of starch-derived biomaterials for application in areas such as orthopaedics, bone cements, tissue engineering, and hydrogels are presented.

Modified Chitosan Cross-linked Starch Polymers for Oral Insulin Delivery

A chitosan, with citric acid cross-linked CMS grafted with methacrylic acid and poly(ethyleneglycol monomethyl ether methacrylate), was prepared for oral delivery of insulin. Increases in chitosan content increased the bioadhesivity. The equilibrium swelling and in vitro release profiles in enzyme-free simulated gastric (SGF) and intestinal fluids (SIF) by the insulin entrapped gels were established. Increasing the chitosan content in the copolymer enhanced the hydrolysis in the SIF. In all cases, the biological activity of insulin was retained. The antimicrobial activity of hydrogels was examined against a Staphylococcus aureus. Based on these results, new designs to improve insulin release behavior are being carried out.

In situ crosslinkable hydrogel formed from a polysaccharide-based hydrogelator

In situ crosslinkable hydrogel formed from an amphiphilic amylopectin-based hydrogelator in aqueous solution was investigated with respect to its viscoelasticity, structure as well as protein encapsulation and release. Different from the physical hydrogel formed from an aqueous amylopectin system of sufficiently high concentration, such a hydrogel could be formed rapidly at room temperature and exhibit enhanced viscoelastic properties, mechanical strength, and shear thinning behavior. In addition, it has a more complex network structure with a higher fractal dimension due to intermolecular hydrophobic interactions and macromolecular chain entanglements. By circular dichroism analyses and in vitro release experiments, this hydrogel material was found to have a great potential as new matrix for the entrapment and sustained release of bovine serum albumin.

Development of a strategy to functionalize a dextrin-based hydrogel for animal cell cultures using a starch-binding module fused to RGD sequence

Background

Several approaches can be used to functionalize biomaterials, such as hydrogels, for biomedical applications. One of the molecules often used to improve cells adhesion is the peptide Arg-Gly-Asp (RGD). The RGD sequence, present in several proteins from the extra-cellular matrix (ECM), is a ligand for integrin-mediated cell adhesion; this sequence was recognized as a major functional group responsible for cellular adhesion. In this work a bi-functional recombinant protein, containing a starch binding module (SBM) and RGD sequence was used to functionalize a dextrin-based hydrogel. The SBM, which belongs to an α-amylase from Bacillus sp. TS-23, has starch (and dextrin, depolymerized starch) affinity, acting as a binding molecule to adsorb the RGD sequence to the hydrogel surface.

Results

The recombinant proteins SBM and RGD-SBM were cloned, expressed, purified and tested in in vitro assays. The evaluation of cell attachment, spreading and proliferation on the dextrin-based hydrogel surface activated with recombinant proteins were performed using mouse embryo fibroblasts 3T3. A polystyrene cell culture plate was used as control. The results showed that the RGD-SBM recombinant protein improved, by more than 30%, the adhesion of fibroblasts to dextrin-based hydrogel. In fact, cell spreading on the hydrogel surface was observed only in the presence of the RGD-SBM.

Conclusion

The fusion protein RGD-SBM provides an efficient way to functionalize the dextrin-based hydrogel. Many proteins in nature that hold a RGD sequence are not cell adhesive, probably due to the conformation/accessibility of the peptide. We therefore emphasise the successful expression of a bi-functional protein with potential for different applications.

New Polysaccharide-based Microparticles Crosslinked with Siloxane: Interactions with Biologically Active Substances

The interaction of microparticles of carboxymethyl pullulan crosslinked with siloxane (provided by a new crosslinking agent: 3-(glycid oxypropyl) trimethoxysilane) with biologically active molecules, such as enzymes (lysozyme) and drugs (propranolol, quinidine) was studied. The anionic amphiphilic supports retained through electrostatic and/or hydrophobic forces, variable amounts of the substances as a function of their structure, such as crosslinking degree and amount of uncrosslinked alkylsilane chains. The absorption of lysozyme on the supports followed the Langmuir isotherm, which allowed the calculation of constants k1 and k2. Both retention and in vitro release behavior of these support potential applications in controlled drug release as well as immobilization and purification of enzymes.

New Semi-Interpenetrating Network Hydrogels: Synthesis, Characterization and Properties

Amphiphilic hydrogels composed of aliphatic polyesters and poly(ethylene glycol) have potential applications in drug delivery, tissue engineering and other biomedical devices due to their advantageous biological properties, biocompatibility and biodegradability. However, they also exhibit some shortcomings in terms of their reactivity, swelling and mechanical properties. To address these limitations, new semi-interpenetrating network (semi-IPN) hydrogels based on poly(ethylene glycol)-co-poly(epsilon-caprolactone) (PEG-PCL) diacrylate macromer and hydroxypropyl guar gum (HPGG) were prepared by a low intensity ultraviolet (UV) light irradiation method, and characterized by FT-IR, DSC and WAXD analysis. Their properties were evaluated by investigating the swelling kinetics, dynamic mechanical rheology and the release behavior for bovine serum albumin (BSA). It was found that the introduction of the semi-IPN structure and HPGG decreased the crystallinity of PEG segments in the hydrogel, and improved the swelling and mechanical properties of the hydrogel, as well as lowered the release percentage of BSA from the hydrogel. Such hydrogel materials may have more advantages as a potentially interesting platform for the design of medical devices.The elastic modulus (G') and viscous modulus (G'') as a function of frequency for various hydrogel samples.