Acetic-Acid Plasma-Polymerization on Polymeric Substrates for Biomedical Application

: Cold plasma is an emerging technology offering many potential applications for regenerative medicine or tissue engineering. This study focused on the characterization of the carboxylic acid functional groups deposited on polymeric substrates using a plasma polymerization process with an acetic acid precursor. The acetic acid precursor contains oxygen and hydrocarbon that, when introduced to a plasma state, forms the polylactide-like film on the substrates. In this study, polymeric substrates were modified by depositing acetic acid plasma film on the surface to improve hydrophilic quality and biocompatibility. The experimental results that of electron spectroscopy for chemical analysis (ESCA) to show for acetic acid film, three peaks corresponding to the C-C group (285.0 eV), C-O group (286.6 eV), and C=O group (288.7 eV) were observed. The resulting of those indicated that appropriate acetic acid plasma treatment could increase the polar components on the surface of substrates to improve the hydrophilicity. In addition, in vitro cell culture studies showed that the embryonic stem (ES) cell adhesion on the acetic acid plasma-treated polymeric substrates is better than the untreated. Such acetic acid film performance makes it become a promising candidate as the surface coating layer on polymeric substrates for biomedical application.

Effect of Hydrolysis Pretreatment on the Formation of Bone-like Apatite on Poly(L-lactide) by Mineralization in Simulated Body Fluids

A bone-like apatite-coated surface that mediates a positive interaction between materials and bone is key to the development of desirable bone substitute materials. To incorporate apatite-coating on poly(L-lactide) (PLLA) surfaces, the effect of the hydrolysis of PLLA surfaces on the formation ability of bone-like apatite was investigated in this study.PLLA films and porous PLLA scaffolds were hydrolyzed for different time periods in alkaline solution and the hydrolyzed PLLA surfaces were characterized with X-ray photoelectron spectroscopy, atomic force microscopy, contact angle, and the measurement of carboxyl density. An apatite coating was formed by mineralizing the hydrolyzed PLLA in simulated body fluids (SBF) for 3 weeks and characterized. The hydrolyzed PLLA surfaces were rich in COOH and OH; the hydrophilicity, surface roughness, and carboxyl density increased with the hydrolysis time. After the incubation in SBF, a bone-like apatite layer with different morphology and composition was formed on the PLLA surfaces. The apatite formation on PLLA surfaces was promoted by the hydrolysis pretreatment and this increases with hydrolysis time. In addition, the compression module of the apatite-coated PLLA scaffolds increased compared with the pure PLLA scaffolds and increased with the hydrolysis time. The hydrolysis pretreatment was important in functionalizing the PLLA surfaces, facilitating subsequent apatite nucleation and apatite growth.

Emulsion templated scaffolds with tunable mechanical properties for bone tissue engineering

Polymerised High Internal Phase Emulsions (PolyHIPEs) are manufactured via emulsion templating and exhibit a highly interconnected microporosity. These materials are commonly used as thin membranes for 3D cell culture. This study uses emulsion templating in combination with microstereolithography to fabricate PolyHIPE scaffolds with a tightly controlled and reproducible architecture. This combination of methods produces hierarchical structures, where the microstructural properties can be independently controlled from the scaffold macrostructure. PolyHIPEs were fabricated with varying ratios of two acrylate monomers (2-ethylhexyl acrylate (EHA) and isobornyl acrylate (IBOA)) and varying nominal porosity to tune mechanical properties. Young's modulus, ultimate tensile stress (UTS) and elongation at failure were determined for twenty EHA/IBOA compositions. Moduli ranged from 63.01±9.13 to 0.36±0.04MPa, UTS from 2.03±0.33 to 0.11±0.01MPa and failure strain from 21.86±2.87% to 2.60±0.61%. Selected compositions were fabricated into macro-porous woodpile structures, plasma treated with air or acrylic acid and seeded with human embryonic stem-cell derived mesenchymal progenitor cells (hES-MPs). Confocal and two-photon microscopy confirmed cell proliferation and penetration into the micro- and macro-porous architecture. The scaffolds supported osteogenic differentiation of mesenchymal cells and interestingly, the stiffest IBOA-based scaffolds that were plasma treated with acrylic acid promoted osteogenesis more strongly than the other scaffolds.

Nanometric self-assembling peptide layers maintain adult hepatocyte phenotype in sandwich cultures

Background

Isolated hepatocytes removed from their microenvironment soon lose their hepatospecific functions when cultured. Normally hepatocytes are commonly maintained under limited culture medium supply as well as scaffold thickness. Thus, the cells are forced into metabolic stress that degenerate liver specific functions. This study aims to improve hepatospecific activity by creating a platform based on classical collagen sandwich cultures.

Results

The modified sandwich cultures replace collagen with self-assembling peptide, RAD16-I, combined with functional peptide motifs such as the integrin-binding sequence RGD and the laminin receptor binding sequence YIG to create a cell-instructive scaffold. In this work, we show that a plasma-deposited coating can be used to obtain a peptide layer thickness in the nanometric range, which in combination with the incorporation of functional peptide motifs have a positive effect on the expression of adult hepatocyte markers including albumin, CYP3A2 and HNF4-alpha.

Conclusions

This study demonstrates the capacity of sandwich cultures with modified instructive self-assembling peptides to promote cell-matrix interaction and the importance of thinner scaffold layers to overcome mass transfer problems. We believe that this bioengineered platform improves the existing hepatocyte culture methods to be used for predictive toxicology and eventually for hepatic assist technologies and future artificial organs.

Modulation of in vitro attachment, proliferation and osteogenic differentiation of rat bone-marrow-derived stem cells using different molecular mass chitosans and their blends with gelatin

We systematically investigated the behaviors of rat bone-marrow-derived stem cells (MSCs) on films prepared from high-molecular-mass chitosan (CH), low-molecular-mass chitooligosaccharide (COS) and their blends with gelatin (G) at various weight blending ratios. On the first day after seeding, the spreading areas of MSCs attached on the blended G/CH and G/COS films were larger than those attached on pure gelatin and COS films. Round-shaped MSCs on pure CH film were observed. The number of proliferated MSCs was also dominant in the case of blended films, at some certain blending ratios which correlated to suitably positive charge of the blended films obtained from zeta potential measurement. Among pure materials, attachment and proliferation of MSCs on COS film were comparable to those on gelatin film while CH film was toxic. The difference in toxicity of CH and COS was also confirmed by Annexin V-FITC/PI apoptosis test. After a 7-day culture under osteogenic induction, the blended films were also found to be more preferable materials for in vitro osteogenic differentiation of MSCs, as confirmed by alkaline phosphatase (ALP) activities, calcium contents and Von Kossa staining. It was proved from this study that attachment, proliferation and osteogenic differentiation of MSCs strongly depended on molecular mass of CHs and the ratio of their blends with gelatin.

Biocompatibility of Poly(Acrylic Acid) Thin Coatings Electro-synthesized onto TiAlV-based Implants

The protection of metal orthopedic implants against corrosion is a crucial medical problem. It was found that electrochemical polymerization of thin, passive poly(acrylic acid) (PAA) films on titanium and TiAlV substrates provides good anti-corrosion properties. In this work, an investigation of anti-corrosion features was carried out to clarify the hypothesis of the presence of an electrostatic contribution to the performance of a PAA coating. Ion release tests were performed at three different pHs; the pH dependence of the polymer swelling was examined by quartz crystal microbalance with dissipation monitoring, to establish the role of this phenomenon on the polymer barrier properties. The potential application of these PAA thin films as biocompatible protective coatings for metal implants and compatibility towards MG-63 human osteoblast-like cells was assessed.

Dynamic Co-Seeding of Osteoblast and Endothelial Cells on 3D Polycaprolactone Scaffolds for Enhanced Bone Tissue Engineering

Tissue engineered scaffolds must have an organized and repeatable microstructure which enables cells to assemble in an ordered matrix that allows adequate nutriental perfusion. In this work, to evaluate the reciprocal cell interactions of endothelial and osteoblast-like cells, human osteoblast-like cells (MG63) and Human Umbilical Vein Endothelial Cells (HUVEC) were co-seeded onto 3D geometrically controlled porous poly(ε-caprolactone) (PCL) and cultured by means of a rotary cell culture system (RCCS-4DQ). In our dynamic co-culture system, the lack of significant enhancement of osteoblast ALP activity and ECM production indicated that the microgravity conditions of the rotary system affected the cells by favoring their proliferation and cellular cross-talk. These results emphasize how osteoblasts increase endothelial cell proliferate and endothelial cells amplify the growth of osteoblasts but decrease their differentiation. This dynamic seeding of osteoblasts and endothelial cells onto a 3D polymeric scaffold may represent a unique approach for studying the mechanisms of interaction of endothelial and osteoblast cells as well as achieve a functional hybrid in which angiogenesis, furnished by neo-vascular organization of endothelial cells may further support osteoblasts growth. Furthermore, this in vitro model may be useful in examining the applicability of novel material structures for tissue engineering.