A heparin-based nanogel system for redox and pH dual-responsive delivery of cisplatin

Heparin recently has been discovered as a novel anti-cancer agent. The combinations of heparin with other agents was reported not only to reduce the undesired effects of free heparin and increase the cellular uptake of the delivered molecules, but also is the basis for the design and development of multi-stimulation response systems to improve their killing cancer cell efficiency at the target positions. This study aimed to design a redox and pH dual-responsive anticancer system based on heparin for cisplatin (CPT) therapy. Heparin was first cross-linked with Poloxamer 407 chains via disulfide bridges to form a redox-sensitive system Hep-P407. CPT was then encapsulated into the Hep-P407 system via the complex of Platin and carboxyl groups to form the redox/pH-responsive system CPT@Hep-P407. The obtained Hep-P407 systems were proved and characterized using specific techniques including1H-NMR, zeta potential, Dynamic Light Scattering (DLS) and Fourier-transform infrared spectroscopy. The dual-responsive behavior to redox and pH of CPT@Hep-P407 was proved through DLS, zeta andin vitrorelease analysis meanwhile its cytotoxicity was investigated using Resazurin assay. The CPT@Hep-P407 system is expected to be a promising redox/pH-responsive anticancer system based on heparin for CPT therapy.

Antibacterial Conductive Collagen-Based Hydrogels for Accelerated Full-Thickness Wound Healing

Antibacterial conductive hydrogels have been extensively utilized in tissue repair and regeneration on account of their unique electrochemical performances and advantages of anti-pathogenic bacterial infection. Here, multi-functional collagen-based hydrogels (CHLY) with adhesivity, conductivity, and antibacterial and antioxidant activities were developed by introducing cysteine-modified ε-poly(l-lysine) (ε-PL-SH) and in situ-polymerized polypyrrole (PPy) nanoparticles to induce full-thickness wound healing. CHLY hydrogels have a low swelling ratio, good compressive strength, and viscoelasticity due to chemical crosslinking, chelation, physical interaction, and nano-reinforcements in the matrix network of hydrogels. CHLY hydrogels possess excellent tissue adhesion ability, low cytotoxicity, enhanced cell migration ability, and good blood coagulation performance without causing hemolysis. Interestingly, the chemical conjugation of ε-PL-SH in the hydrogel matrix gives hydrogels an inherently robust and broad-spectrum antibacterial activity, while the introduction of PPy endows hydrogels with superior free radical scavenging capacity and good electroactivity. Significantly, CHLY hydrogels have advantages in alleviating persistent inflammatory response as well as promoting angiogenesis, epidermis regeneration, and orderly collagen deposition at the wound sites through their multi-functional synergies, thus effectively accelerating full-thickness wound healing and improving wound healing quality. Overall, our developed multi-functional collagen-based hydrogel dressing demonstrates promising application prospects in the field of tissue engineering to induce skin regeneration.

Smart Stimuli-responsive Alginate Nanogels for Drug Delivery Systems and Cancer Therapy: A Review

Nanogels are three-dimensional networks at the nanoscale level that can be fabricated through physical or chemical processes using polymers. These nanoparticles' biocompatibility, notable stability, efficacious drug-loading capacity, and ligand-binding proficiency make them highly suitable for employment as drug-delivery vehicles. In addition, they exhibit the ability to react to both endogenous and exogenous stimuli, which may include factors such as temperature, illumination, pH levels, and a diverse range of other factors. This facilitates the consistent administration of the drug to the intended site. Alginate biopolymers have been utilized to encapsulate anticancer drugs due to their biocompatible nature, hydrophilic properties, and cost-effectiveness. The efficacy of alginate nano gel-based systems in cancer treatment has been demonstrated through multiple studies that endorse their progress toward clinical implementation. This paper comprehensively reviews alginate and its associated systems in drug delivery systems.

Green Hydrogel Synthesis: Emphasis on Proteomics and Polymer Particle-Protein Interaction

The field of drug discovery has seen significant progress in recent years. These advances drive the development of new technologies for testing compound's effectiveness, as well as their adverse effects on organs and tissues. As an auxiliary tool for drug discovery, smart biomaterials and biopolymers produced from biodegradable monomers allow the manufacture of multifunctional polymeric devices capable of acting as biosensors, of incorporating bioactives and biomolecules, or even mimicking organs and tissues through self-association and organization between cells and biopolymers. This review discusses in detail the use of natural monomers for the synthesis of hydrogels via green routes. The physical, chemical and morphological characteristics of these polymers are described, in addition to emphasizing polymer-particle-protein interactions and their application in proteomics studies. To highlight the diversity of green synthesis methodologies and the properties of the final hydrogels, applications in the areas of drug delivery, antibody interactions, cancer therapy, imaging and biomarker analysis are also discussed, as well as the use of hydrogels for the discovery of antimicrobial and antiviral peptides with therapeutic potential.

Antiviral Compounds Based on Natural ASTRAGALUS POLYSACCHARIDE (APS): Researches and Foresight in the Strategies for Combating SARS-CoV-2 (COVID-19)

Today, finding natural polymers with desirable properties for use in various industries is one of the critical axes of research in the world. Polysaccharides are a group of natural polymers that have various applications in the pharmaceutical industry. The attachment of monosaccharides forms polysaccharides through glycosidic bonds that are widely found in various sources, including plants. Genus Astragalus belongs to the Fabaceae family. Plants belonging to this genus have different polysaccharides. Astragalus polysaccharides (APS) have attracted a great deal of attention among natural polymers because they are non-toxic, biodegradable, and biocompatible. Currently, APS has great drug potential for curing or treating various diseases. Due to the different biological activities of polysaccharides, including Astragalus, this study has investigated the chemical structure of APS, research report on antiviral, anti-inflammatory, and stimulation of cytokine secretion by these polysaccharides. Also, in this study, the pharmaceutical approaches of APS compounds, as a natural, new and inexpensive source, have been discussed as suitable candidates for use in pharmaceutical formulations and preparation of new drugs to control COVID-19 infection.

Recent Progress and Advances of Multi-Stimuli-Responsive Dendrimers in Drug Delivery for Cancer Treatment

Despite the fact that nanocarriers as drug delivery systems overcome the limitation of chemotherapy, the leakage of encapsulated drugs during the delivery process to the target site can still cause toxic effects to healthy cells in other tissues and organs in the body. Controlling drug release at the target site, responding to stimuli that originated from internal changes within the body, as well as stimuli manipulated by external sources has recently received significant attention. Owning to the spherical shape and porous structure, dendrimer is utilized as a material for drug delivery. Moreover, the surface region of dendrimer has various moieties facilitating the surface functionalization to develop the desired material. Therefore, multi-stimuli-responsive dendrimers or 'smart' dendrimers that respond to more than two stimuli will be an inspired attempt to achieve the site-specific release and reduce as much as possible the side effects of the drug. The aim of this review was to delve much deeper into the recent progress of multi-stimuli-responsive dendrimers in the delivery of anticancer drugs in addition to the major potential challenges.

Review of polysaccharide particle-based functional drug delivery

This review investigates the significant role polysaccharide particles play in functional drug delivery. The importance of these systems is due to the wide variety of polysaccharides and their natural source meaning that they can provide biocompatible and biodegradable systems with a range of both biological and chemical functionality valuable for drug delivery. This functionality includes protection and presentation of working therapeutics through avoidance of the reticuloendothelial system, stabilization of biomacromolecules and increasing the bioavailability of incorporated small molecule drugs. Transport of the therapeutic is also key to the utility of polysaccharide particles, moving drugs from the site of administration through mucosal binding and transport and using chemistry, size and receptor mediated drug targeting to specific tissues. This review also scrutinizes the methods of synthesizing and constructing functional polysaccharide particle drug delivery systems that maintain and extend the functionality of the natural polysaccharides.

Partial Surface Modification of Low Generation Polyamidoamine Dendrimers: Gaining Insight into their Potential for Improved Carboplatin Delivery

Carboplatin (CAR) is a second generation platinum-based compound emerging as one of the most widely used anticancer drugs to treat a variety of tumors. In an attempt to address its dose-limiting toxicity and fast renal clearance, several delivery systems (DDSs) have been developed for CAR. However, unsuitable size range and low loading capacity may limit their potential applications. In this study, PAMAM G3.0 dendrimer was prepared and partially surface modified with methoxypolyethylene glycol (mPEG) for the delivery of CAR. The CAR/PAMAM G3.0@mPEG was successfully obtained with a desirable size range and high entrapment efficiency, improving the limitations of previous CAR-loaded DDSs. Cytocompatibility of PAMAM G3.0@mPEG was also examined, indicating that the system could be safely used. Notably, an in vitro release test and cell viability assays against HeLa, A549, and MCF7 cell lines indicated that CAR/PAMAM G3.0@mPEG could provide a sustained release of CAR while fully retaining its bioactivity to suppress the proliferation of cancer cells. These obtained results provide insights into the potential of PAMAM G3.0@mPEG dendrimer as an efficient delivery system for the delivery of a drug that has strong side effects and fast renal clearance like CAR, which could be a promising approach for cancer treatment.

Modified Carboxyl-Terminated PAMAM Dendrimers as Great Cytocompatible Nano-Based Drug Delivery System

Polyamidoamine (PAMAM) dendrimers are extensively researched as potential drug delivery system thanks to their desirable features such as controlled and stable structures, and ease of functionalization onto their surface active groups. However, there have been concerns about the toxicity of full generation dendrimers and risks of premature clearance from circulation, along with other physical drawbacks presented in previous formulations, including large particle sizes and low drug loading efficiency. In our study, carboxyl-terminated PAMAM dendrimer G3.5 was grafted with poly (ethylene glycol) methyl ether (mPEG) to be employed as a nano-based drug delivery system with great cytocompatibility for the delivery of carboplatin (CPT), a widely prescribed anticancer drug with strong side effects so that the drug will be effectively entrapped and not exhibit uncontrolled outflow from the open structure of unmodified PAMAM G3.5. The particles formed were spherical in shape and had the optimal size range (around 36 nm) that accommodates high drug entrapment efficiency. Surface charge was also determined to be almost neutral and the system was cytocompatible. In vitro release patterns over 24 h showed a prolonged CPT release compared to free drug, which correlated to the cytotoxicity assay on malignant cell lines showing the lack of anticancer effect of CPT/mPEG-G3.5 compared with CPT.

Functional Magnetic Core-Shell System-Based Iron Oxide Nanoparticle Coated with Biocompatible Copolymer for Anticancer Drug Delivery

Polymer coating has drawn increasing attention as a leading strategy to overcome the drawbacks of superparamagnetic iron oxide nanoparticles (SPIONs) in targeted delivery of anticancer drugs. In this study, SPIONs were modified with heparin-Poloxamer (HP) shell to form a SPION@HP core-shell system for anticancer drug delivery. The obtained formulation was characterized by techniques including transmission electron microscopy (TEM), Fourier transform infrared spectra (FT-IR), vibration sample magnetometer (VSM), proton nuclear magnetic resonance (¹H-NMR), and powder X-ray diffraction (XRD). Results showed the successful attachment of HP shell on the surface of SPION core and the inability to cause considerable effects to the crystal structure and unique magnetic nature of SPION. The core-shell system maintains the morphological features of SPIONs and the desired size range. Notably, Doxorubicin (DOX), an anticancer drug, was effectively entrapped into the polymeric shell of SPION@HP, showing a loading efficiency of 66.9 ± 2.7% and controlled release up to 120 h without any initial burst effect. Additionally, MTT assay revealed that DOX-loaded SPION@HP exerted great anticancer effect against HeLa cells and could be safely used. These results pave the way for the application of SPION@HP as an effective targeted delivery system for cancer treatment.

Programming Stimuli-Responsive Behavior into Biomaterials

Stimuli-responsive materials undergo triggered changes when presented with specific environmental cues. These dynamic systems can leverage biological signals found locally within the body as well as exogenous cues administered with spatiotemporal control, providing powerful opportunities in next-generation diagnostics and personalized medicine. Here, we review the synthetic and strategic advances used to impart diverse responsiveness to a wide variety of biomaterials. Categorizing systems on the basis of material type, number of inputs, and response mechanism, we examine past and ongoing efforts toward endowing biomaterials with customizable sensitivity. We draw an analogy to computer science, whereby a stimuli-responsive biomaterial transduces a set of inputs into a functional output as governed by a user-specified logical operator. We discuss Boolean and non-Boolean operations, as well as the various chemical and physical modes of signal transduction. Finally, we examine current limitations and promising directions in the ongoing development of programmable stimuli-responsive biomaterials.

Dual-Sensitive Hydrogel Nanoparticles Based on Conjugated Thermoresponsive Copolymers and Protein Filaments for Triggerable Drug Delivery

In this study, novel hydrogel nanoparticles with dual triggerable release properties based on fibrous structural proteins (keratin) and thermoresponsive copolymers (Pluronic) are introduced. Nanoparticles were used for curcumin delivery as effective and safe anticancer agents, the hydrophobicity of which has limited their clinical applications. A drug was loaded into hydrogel nanoparticles by a single-step nanoprecipitation method. The drug-loaded nanoparticles had an average diameter of 165 and 66 nm at 25 and 37 °C, respectively. It was shown that the drug loading efficiency could be enhanced through crosslinking of the disulfide bonds in keratin. Crosslinking provided a targeted release profile under reductive conditions using an in vivo agent, glutathione (GSH), or in the presence of trypsin. Cytocompatibility assay using HeLa and L929 fibroblast cells exhibited no adverse effect of nanoparticles on cell viability up to 1 mg/mL. Besides, the green fluorescence of curcumin confirmed the uptake of drug-loaded nanoparticles by cancer cells. The redox and temperature-sensitive nanoparticles are potentially useable for the efficient delivery of hydrophobic drugs to targeted regions having a triggerable release profile.

Efficient Self-Assembly of mPEG End-Capped Porous Silica as a Redox-Sensitive Nanocarrier for Controlled Doxorubicin Delivery

Porous nanosilica (PNS) has been regarded as a promising candidate for controlled delivery of anticancer drugs. Unmodified PNS-based nanocarriers, however, showed a burst release of encapsulated drugs, which may limit their clinical uses. In this report, PNS was surface conjugated with adamantylamine (ADA) via disulfide bridges (-SS-), PNS-SS-ADA, which was further modified with cyclodextrin-poly(ethylene glycol) methyl ether conjugate (CD-mPEG) to form a core@shell structure PNS-SS-ADA@CD-mPEG for redox triggered delivery of doxorubicin (DOX), DOX/PNS-SS-ADA@CD-mPEG. The prepared PNS-SS-ADA@CD-mPEG nanoparticles were spherical in shape with an average diameter of 55.5 ± 3.05 nm, a little larger than their parentally PNS nanocarriers, at 49.6 ± 2.56 nm. In addition, these nanoparticles possessed high drug loading capacity, at 79.2 ± 3.2%, for controlled release. The release of DOX from DOX/PNS-SS-ADA@CD-mPEG nanoparticles was controlled and prolonged up to 120 h in PBS medium (pH 7.4), compared to less than 40 h under reducing condition of 5 mM DTT. Notably, the PNS-SS-ADA@CD-mPEG was a biocompatible nanocarrier, and the toxicity of DOX was dramatically reduced after loading drugs into the porous core. This redox-sensitive PNS-SS-ADA@CD-mPEG nanoparticle could be considered a potential candidate with high drug loading capacity and a lower risk of systemic toxicity.

Basic concepts and recent advances in nanogels as carriers for medical applications

Nanogels in biomedical field are promising and innovative materials as dispersions of hydrogel nanoparticles based on crosslinked polymeric networks that have been called as next generation drug delivery systems due to their relatively high drug encapsulation capacity, uniformity, tunable size, ease of preparation, minimal toxicity, stability in the presence of serum, and stimuli responsiveness. Nanogels show a great potential in chemotherapy, diagnosis, organ targeting and delivery of bioactive substances. The main subjects reviewed in this article concentrates on: (i) Nanogel assimilation in the nanomedicine domain; (ii) Features and advantages of nanogels, the main characteristics, such as: swelling capacity, stimuli sensitivity, the great surface area, functionalization, bioconjugation and encapsulation of bioactive substances, which are taken into account in designing the structures according to the application; some data on the advantages and limitations of the preparation techniques; (iii) Recent progress in nanogels as a carrier of genetic material, protein and vaccine. The majority of the scientific literature presents the multivalency potential of bioconjugated nanogels in various conditions. Today's research focuses over the overcoming of the restrictions imposed by cost, some medical requirements and technological issues, for nanogels' commercial scale production and their integration as a new platform in biomedicine.

Low systemic toxicity nanocarriers fabricated from heparin-mPEG and PAMAM dendrimers for controlled drug release

In this report, poly(amide amine) (PAMAM) dendrimer and Heparin-grafted-monomethoxy polyethylene glycol (HEP-mPEG) were synthesized and characterized. In aqueous solution, the generation 4 PAMAM dendrimers (G4.0-PAMAM) existed as nanoparticles with particle size of 5.63nm. However, after electrostatic complexation with HEP-mPEG to form a core@shell structure G4.0-PAMAM@HEP-mPEG, the size of nanoparticles was significantly increased (73.82nm). The G4.0-PAMAM@HEP-mPEG nanoparticles showed their ability to effectively encapsulate doxorubicin (DOX) for prolonged and controlled release. The cytocompatibility of G4.0-PAMAM@HEP-mPEG nanocarriers was significantly increased compared with its parentally G4.0-PAMAM dendrimer in both mouse fibroblast NIH3T3 and the human tumor HeLa cell lines. DOX was effectively encapsulated into G4.0-PAMAM@HEP-mPEG nanoparticles to form DOX-loaded nanocarriers (DOX/G4.0-PAMAM@HEP-mPEG) with high loading efficiency (73.2%). The release of DOX from DOX/G4.0-PAMAM@HEP-mPEG nanocarriers was controlled and prolonged up to 96h compared with less than 24h from their parentally G4.0-PAMAM nanocarriers. Importantly, the released DOX retained its bioactivity by inhibiting the proliferation of monolayer-cultured cancer HeLa cells with the same degree of fresh DOX. This prepared G4.0-PAMAM@HEP-mPEG nanocarrier can be a potential candidate for drug delivery systems with high loading capacity and low systemic toxicity in cancer therapy.

Development and In Vitro Evaluation of Liposomes Using Soy Lecithin to Encapsulate Paclitaxel

The formulation of a potential delivery system based on liposomes (Lips) formulated from soy lecithin (SL) for paclitaxel (PTX) was achieved (PTX-Lips). At first, PTX-Lips were prepared by thin film method using SL and cholesterol and then were characterized for their physiochemical properties (particle size, polydispersity index, zeta potential, and morphology). The results indicated that PTX-Lips were spherical in shape with a dynamic light scattering (DLS) particle size of 131 ± 30.5 nm. Besides, PTX was efficiently encapsulated in Lips, 94.5 ± 3.2% for drug loading efficiency, and slowly released up to 96 h, compared with free PTX. More importantly, cell proliferation kit I (MTT) assay data showed that Lips were biocompatible nanocarriers, and in addition the incorporation of PTX into Lips has been proven successful in reducing the toxicity of PTX. As a result, development of Lips using SL may offer a stable delivery system and promising properties for loading and sustained release of PTX in cancer therapy.

Redox-sensitive self-assembled nanoparticles based on alpha-tocopherol succinate-modified heparin for intracellular delivery of paclitaxel

To remedy the problems riddled in cancer chemotherapy, such as poor solubility, low selectivity, and insufficient intra-cellular release of drugs, novel heparin-based redox-sensitive polymeric nanoparticles were developed. The amphiphilic polymer, heparin-alpha-tocopherol succinate (Hep-cys-TOS) was synthesized by grafting hydrophobic TOS to heparin using cystamine as the redox-sensitive linker, which could self-assemble into nanoparticles in phosphate buffer saline (PBS) with low critical aggregation concentration (CAC) values ranging from 0.026 to 0.093mg/mL. Paclitaxel (PTX)-loaded Hep-cys-TOS nanoparticles were prepared via a dialysis method, exhibiting a high drug-loading efficiency of 18.99%. Physicochemical properties of the optimized formulation were characterized by dynamic light scattering (DLS), transmission electron microscope (TEM) and differential scanning calorimetry (DSC). Subsequently, the redox-sensitivity of Hep-cys-TOS nanoparticles was confirmed by the changes in size distribution, morphology and appearance after dithiothreitol (DTT) treatment. Besides, the in vitro release of PTX from Hep-cys-TOS nanoparticles also exhibited a redox-triggered profile. Also, the uptake behavior and pathways of coumarin 6-loaded Hep-cys-TOS nanoparticles were investigated, suggesting the nanoparticles could be taken into MCF-7 cells in energy-dependent, caveolae-mediated and cholesterol-dependent endocytosis manners. Later, MTT assays of different PTX-free and PTX-loaded formulations revealed the desirable safety of PTX-free nanoparticles and the enhanced anti-cancer activity of PTX-loaded Hep-cys-TOS nanoparticles (IC₅₀=0.79μg/mL). Apoptosis study indicated the redox-sensitive formulation could induce more apoptosis of MCF-7 cells than insensitive one (55.2% vs. 41.7%), showing the importance of intracellular burst release of PTX. Subsequently, the hemolytic toxicity confirmed the safety of the nanoparticles for intravenous administration. The results indicated the developed redox-sensitive nanoparticles were promising as intracellular drug delivery vehicles for cancer treatment.

Redox and pH Responsive Poly (Amidoamine) Dendrimer-Heparin Conjugates via Disulfide Linkages for Letrozole Delivery

Heparin (Hep) conjugated to poly (amidoamine) dendrimer G3.5 (P) via redox-sensitive disulfide bond (P-SS-Hep) was studied. The redox and pH dual-responsive nanocarriers were prepared by a simple method that minimized many complex steps as previous studies. The functional characterization of G3.5 coated Hep was investigated by the proton nuclear magnetic resonance spectroscopy. The size and formation were characterized by the dynamic light scattering, zeta potential, and transmission electron microscopy. P-SS-Hep was spherical in shape with average diameter about 11 nm loaded with more than 20% letrozole. This drug carrier could not only eliminate toxicity to cells and improve the drugs solubility but also increase biocompatibility of the system under reductive environment of glutathione. In particular, P-SS-Hep could enhance the effectiveness of cancer therapy after removing Hep from the surface. These results demonstrated that the P-SS-Hep conjugates could be a promising candidate as redox and pH responsive nanocarriers for cancer chemotherapy.

Glycosaminoglycan-Based Biohybrid Hydrogels: A Sweet and Smart Choice for Multifunctional Biomaterials

Glycosaminoglycans (GAGs) govern important functional characteristics of the extracellular matrix (ECM) in living tissues. Incorporation of GAGs into biomaterials opens up new routes for the presentation of signaling molecules, providing control over development, homeostasis, inflammation, and tumor formation and progression. Recent approaches to GAG-based materials are reviewed, highlighting the formation of modular, tunable biohybrid hydrogels by covalent and non-covalent conjugation schemes, including both theory-driven design concepts and advanced processing technologies. Examples of the application of the resulting materials in biomedical studies are provided. For perspective, solid-phase and chemoenzymatic oligosaccharide synthesis methods for GAG-derived motifs, rational and high-throughput design strategies for GAG-based materials, and the utilization of the factor-scavenging characteristics of GAGs are highlighted.

Luteinizing Hormone Releasing Hormone-Targeted Cisplatin-Loaded Magnetite Nanoclusters for Simultaneous MR Imaging and Chemotherapy of Ovarian Cancer

Given the superior soft tissue contrasts obtained by MRI and the long residence times of magnetic nanoparticles (MNPs) in soft tissues, MNP-based theranostic systems are being developed for simultaneous imaging and treatment. However, development of such theranostic nanoformulations presents significant challenges of balancing the therapeutic and diagnostic functionalities in order to achieve optimum effect from both. Here we developed a simple theranostic nanoformulation based on magnetic nanoclusters (MNCs) stabilized by a bisphosphonate-modified poly(glutamic acid)-b-(ethylene glycol) block copolymer and complexed with cisplatin. The MNCs were decorated with luteinizing hormone releasing hormone (LHRH) to target LHRH receptors (LHRHr) overexpressed in ovarian cancer cells. The targeted MNCs significantly improved the uptake of the drug in cancer cells and decreased its IC50 compared to the nontargeted formulations. Also, the enhanced LHRHr-mediated uptake of the targeted MNCs resulted in enhancement in the T2-weighted negative contrast in cellular phantom gels. Taken together, the LHRH-conjugated MNCs show good potential as ovarian cancer theranostics.

Highly lipophilic pluronics-conjugated polyamidoamine dendrimer nanocarriers as potential delivery system for hydrophobic drugs

In the study, four kinds of pluronics (P123, F68, F127 and F108) with varying hydrophilic-lipophilic balance (HLB) values were modified and conjugated on 4th generation of polyamidoamine dendrimer (PAMAM). The obtained results from FT-IR, ¹H NMR and GPC showed that the pluronics effectively conjugated on the dendrimer. The molecular weight of four PAMAM G4.0-Pluronics and its morphologies are in range of 200.15-377.14kDa and around 60-180nm in diameter by TEM, respectively. Loading efficiency and release of hydrophobic fluorouracil (5-FU) anticancer drug were evaluated by HPLC; Interesting that the dendrimer nanocarrier was conjugated with the highly lipophilic pluronic P123 (G4.0-P123) exhibiting a higher drug loading efficiency (up to 76.25%) in comparison with another pluronics. Live/dead fibroblast cell staining assay mentioned that all conjugated nanocarriers are highly biocompatible. The drug-loaded nanocarriers also indicated a highly anti-proliferative activity against MCF-7 breast cancer cell. The obtained results demonstrated a great potential of the highly lipophilic pluronics-conjugated nanocarriers in hydrophobic drugs delivery for biomedical applications.

Synthesis and characterization of bioreducible heparin-polyethyleneimine nanogels: application as imaging-guided photosensitizer delivery vehicle in photodynamic therapy

HPC nanogels possess bright blue fluorescence which eliminates the use of additional probing agents in image-guided drug delivery. The results showed that disulfide crosslinked HPC nanogels are promising vehicles for stimulated photosensitizer delivery in advanced PDT.

Surfactant-Free Emulsion-Based Preparation of Redox-Responsive Nanogels

A surfactant-free emulsion-based approach is developed for preparation of nanogels. A water-in-oil emulsion is generated feasibly from a mixture of water and a solution of disulfide-containing hyperbranched PEGylated poly(amido amine)s, poly(BAC2-AMPD1)-PEG, in chloroform. The water droplets in the emulsion are stabilized and filled with poly(BAC2-AMPD1)-PEG, and the crosslinked poly(amido amine)s nanogels are formed via the intermolecular disulfide exchange reaction. FITC-dextran is loaded within the nanogels by dissolving the compound in water before emulsification. Transmission electron microscopy and dynamic light scattering are applied to characterize the emulsion and the nanogels. The effects of the homogenization rate and the ratio of water/polymer are investigated. Redox-induced degradation and FITC-dextran release profile of the nanogels are monitored, and the results show efficient loading and redox-responsive release of FITC-dextran. This is a promising approach for the preparation of nanogels for drug delivery, especially for neutral charged carbohydrate-based drugs.

Dual growth factor-loaded in situ gel-forming bulking agent: passive and bioactive effects for the treatment of urinary incontinence

Stress urinary incontinence (SUI) is one of the major medical problems for adult females and has a devastating effect on their quality of life. The major cause of the development of the SUI is dysfunction of the urethral supporting tissues as a result of aging and childbirth. In this study, in situ gel-forming bulking agent loaded with dual growth factors, nerve growth factor (NGF) and basic fibroblast growth factor (bFGF), was fabricated. The bulking agent consisted of three components; (i) polycaprolactone (PCL) beads, (ii) bFGF-loaded nanogels, and (iii) NGF-loaded in situ gel forming solution. The bulking agent can provide an initial passive bulking effect (from the PCL beads) and regenerate malfunctioning tissues around the urethra (from the sequential and continuous release of growth factors from the hydrogel) for the effective treatment of SUI. The PCL beads were located stably at the applied urethra site (urinary incontinent SD rat) without migration to provide a passive bulking effect. The sequential release of the growth factors (NGF within a week and bFGF for more than 4 weeks) from the bulking agent provided regeneration of damaged nerve and smooth muscle, and thus enhanced biological function around the urethra. From the findings, we suggest that dual growth factor (NGF and bFGF)-loaded in situ gel-forming bulking agent may be a promising injectable bioactive system for the treatment for SUI.

Stimuli responsive drug delivery application of polymer and silica in biomedicine

In the last decade, using polymer and mesoporous silica materials as efficient drug delivery carriers has attracted great attention.

Reducible cationic PAA-g-PEI polymeric micelle/DNA complexes for enhanced gene delivery

The design of unique vectors to overcome the cytotoxicity and increase the efficiency of gene transfection has enormous challenges. Polyethylenimine (PEI) is one of the most effective polymer-based gene carriers. However, the transfection efficiency and toxicity of PEI correlate strongly to its molecular weight (MW). In this study, novel reduction-sensitive amphiphilic poly[phenethylamido- N,N-bis(acryloyl) cystine]- g-polyethylenimine (PAA- g-PEI) copolymers were synthesized by grafting low-MW PEIs onto reducible poly[phenethylamido-N,N-bis(acryloyl) cystine] (PAA).

These copolymers self-assembled in aqueous solution into micelles with sizes <70 nm, as determined by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The PAA- g-PEI2000 micelles effectively condense with the plasmid DNA to form complex nanoparticles with diameters of ~100 nm at an N/P ratio of 4/1. The PAA- g-PEI2000 micelle/DNA complexes protected the DNA from degrading by nuclease and released DNA under reductive conditions by the cleavage of the disulfide bonds and the subsequent disassembly of the micelles. As determined by gene transfection experiments, the transfection efficiency of the PAA- g-PEI2000 micelle/DNA complexes was significantly greater than that of the PEI25K/DNA complexes, while the cytotoxicity of the copolymers was much lower than that for PEI25K.

Redox-responsive nanocarrier based on heparin end-capped mesoporous silica nanoparticles for targeted tumor therapy in vitro and in vivo

This study reports a smart controlled drug release system based on mesoporous silica nanoparticles (MSNs) for targeted drug delivery. The system was fabricated by employing heparin as an end-capping agent to seal the mesopores of MSNs via disulfide bonds as intermediate linkers for intracellular glutathione triggered drug release. Lactobionic acid molecules were then coupled to heparin end-capped MSNs that serve as targeting motifs for facilitating the uptake of doxorubicin (DOX) loaded MSNs by HepG2 cells and tumors, respectively. Detailed investigations demonstrated that the fabricated drug delivery systems could deliver DOX to cancer cells to induce cell apoptosis in vitro and tumor tissue for the inhibition of tumor growth in vivo with minimal side effects. The study affords a promising nanocarrier for redox-responsive cargo delivery with high curative efficiency for cancer therapy.

Succinylated polysaccharide-based thermosensitive polyelectrostatic complex for protein drug delivery

The objective of this study was to develop a thermosensitive polyelectrostatic complex, based on polysaccharides, as carriers for long-term protein delivery. We developed a thermosensitive polyelectrostatic complex formed through combined electrostatic and hydrophobic interactions. The copolymer (succinylated pullulan -poly(l-lactide)) showed thermosensitivity in aqueous solution and complexed with protein (lysozyme) via electrostatic attractions and hydrophobic interactions at physiological temperature which formed a thermosensitive polyelectrostatic complex. The particle size of the thermosensitive polyelectrostatic complex was decreased from ~520 nm at 4°C to ~190 nm at 37.5°C. These thermosensitive polyelectrostatic complexes were stable in serum and salt conditions, and maintained the bioactivity of encapsulated protein for 36 days. The thermosensitive polyelectrostatic complex had prolonged in vivo stability that was greater than the polyelectrostatic complex. Based on stability and bioactivity tests for the lysozyme-loaded thermosensitive polyelectrostatic complexes, the potential of the long-term protein delivery carrier in physiological conditions was confirmed.

Dual enzyme responsive and targeted nanocapsules for intracellular delivery of anticancer agents

Fabrication of dual enzyme responsive and ligand functionalised nanocapsules are reported that can accumulate and disintegrate inside cancer cells.

Crosslinked ionic polysaccharides for stimuli-sensitive drug delivery

Polysaccharides are gaining increasing attention as components of stimuli-responsive drug delivery systems, particularly since they can be obtained in a well characterized and reproducible way from the natural sources. Ionic polysaccharides can be readily crosslinked to render hydrogel networks sensitive to a variety of internal and external variables, and thus suitable for switching drug release on-off through diverse mechanisms. Hybrids, composites and grafted polymers can reinforce the responsiveness and widen the range of stimuli to which polysaccharide-based systems can respond. This review analyzes the state of the art of crosslinked ionic polysaccharides as components of delivery systems that can regulate drug release as a function of changes in pH, ion nature and concentration, electric and magnetic field intensity, light wavelength, temperature, redox potential, and certain molecules (enzymes, illness markers, and so on). Examples of specific applications are provided. The information compiled demonstrates that crosslinked networks of ionic polysaccharides are suitable building blocks for developing advanced externally activated and feed-back modulated drug delivery systems.

Bioreducible cross-linked Pluronic micelles: pH-triggered release of doxorubicin and folate-mediated cellular uptake

Bioreducible are described here, cross-linked Pluronic micelles carrying doxorubicin (DOX) for folate-mediated cancer targeting. The amine-terminated Pluronic® F-127 was functionalized by grafting acrylic acid (AA) to the hydrophobic block (AA-Pluronic-NH2). Folic acid (FA), hydrazine (H), and cystamine (C) were sequentially conjugated to AA-Pluronic-NH2, followed by DOX conjugation via an acid-labile hydrazone bond (FA-Pluronic-C/H-DOX). The DOX content was approximately 143 µg/mg of polymer. We prepared bioreducible cross-linked micelles using FA-Pluronic-C/H-DOX, which had a diameter of 156.1 nm. After incubation for 24 h with 10 mM of dithiothreitol, the micelle size decreased dramatically to 87.6 nm with a broad distribution, indicating that disulfide bonds in the micelle core were reductively cleaved. In vitro release data showed that the conjugated DOX was released slowly from the FA-Pluronic C/H-DOX micelles at pH 7.4, whereas there was a rapid DOX release at pH 5.2. Confocal images of HeLa cells showed enhanced cellular uptake of FA-Pluronic-C/H-DOX micelles as compared to nontargeted Pluronic-C/H-DOX micelles. The FA-Pluronic-C/H-DOX micelles killed more cells than the nontargeted micelles, but the cytotoxic effect was not as significant as free DOX. Additionally, micelles without DOX were not cytotoxic. On the basis of these results, pH- and redox potential–responsive FA-Pluronic-C/H-DOX micelles could potentially function as cancer-targeted and controlled DOX delivery systems.

The synthesis and characterization of a thermally responsive hyaluronic acid/Pluronic copolymer and an evaluation of its potential as an artificial vitreous substitute

A smart in situ polymerizable artificial vitreous substitute was synthesized via the copolymerization of hyaluronic acid and Pluronic® F-127. This copolymer has a unique sol–gel transition at different temperatures. The liquid was injected into a vitreous cavity at room temperature and forms a hydrogel at physiological temperatures. The chemical, rheological, and optical properties and the biodegradability and biocompatibility were studied to determine the optimum formulation for the hydrogel. The H1F20 hydrogel optical properties were similar to those of the vitreous humor. Biodegradability studies indicate that the H1F20 hydrogel maintains 60% of the mass in 10,000 U mL−1 of lysozyme solution, after 7 days. The H1F20 hydrogel had the highest human retinal pigment epithelial cell (ARPE-19) viability, which was significantly higher than that of the control ( p < 0.01). In summary, H1F20 appears to be a suitable artificial vitreous substitute.

In situ forming reduction-sensitive degradable nanogels for facile loading and triggered intracellular release of proteins

In situ forming reduction-sensitive degradable nanogels were designed and developed based on poly(ethylene glycol)-b-poly(2-(hydroxyethyl) methacrylate-co-acryloyl carbonate) (PEG-P(HEMA-co-AC)) block copolymers for efficient loading as well as triggered intracellular release of proteins. PEG-P(HEMA-co-AC) copolymers were prepared with controlled Mn of 9.1, 9.5, and 9.9 kg/mol and varying numbers of AC units per molecule of 7, 9 and 11, respectively (denoted as copolymer 1, 2, and 3) by reversible addition-fragmentation chain transfer copolymerization. These copolymers were freely soluble in phosphate buffer but formed disulfide-cross-linked nanogels with defined sizes ranging from 72.5 to 124.1 nm in the presence of cystamine via ring-opening reaction with cyclic carbonate groups. The sizes of nanogels decreased with increasing AC units as a result of increased cross-linking density. Dynamic light scattering studies showed that these nanogels though stable at physiological conditions were rapidly dissociated in response to 10 mM dithiothreitol (DTT). Interestingly, FITC-labeled cytochrome C (FITC-CC) could be readily loaded into nanogels with remarkable loading efficiencies (up to 98.2%) and loading contents (up to 48.2 wt.%). The in vitro release studies showed that release of FITC-CC was minimal under physiological conditions but significantly enhanced under reductive conditions in the presence of 10 mM DTT with about 96.8% of FITC-CC released in 22 h from nanogel 1. In contrast, protein release from 1,4-butanediamine cross-linked nanogels (reduction-insensitive control) remained low under otherwise the same conditions. MTT assays showed that these nanogels were nontoxic to HeLa cells up to a tested concentration of 2 mg/mL. Confocal microscopy results showed that nanogel 1 delivered and released FITC-CC into the perinuclei region of HeLa cells following 8 h incubation. CC-loaded reductively degradable nanogels demonstrated apparently better apoptotic activity than free CC as well as reduction-insensitive controls. These in situ forming, surfactant and oil-free, and reduction-sensitive degradable nanogels are highly promising for targeted protein therapy.

Preparation and characterizations of in situ shell cross-linked 4-arm-poly(propylene oxide)–poly(ethylene oxide) micelles via enzyme-mediated reaction for controlled drug delivery

The shell cross-linked micelles composed of tyramine-conjugated 4-arm poly(propylene oxide)–poly(ethylene oxide) was developed as a carrier for controlled drug delivery. The shell cross-linked tyramine-conjugated 4-arm poly(propylene oxide)–poly(ethylene oxide) micelles were prepared by an enzyme-mediated reaction using horseradish peroxidase and hydrogen peroxide. The physicochemical properties, size distribution, morphologies, and thermal properties of the shell cross-linked tyramine-conjugated 4-arm poly(propylene oxide)–poly(ethylene oxide) micelles were characterized to confirm the micelle formation and controllable properties dependent on the concentration of the catalysts. The in vitro cytocompatibility of the micelles was investigated using NIH3T3 fibroblast cells, and the shell cross-linked tyramine-conjugated 4-arm poly(propylene oxide)–poly(ethylene oxide) micelles showed low cytotoxicity. The in vitro hydrophobic drug release behavior from the shell cross-linked tyramine-conjugated 4-arm poly(propylene oxide)–poly(ethylene oxide) micelles was controllable with a sustained release behavior. Therefore, the shell cross-linked tyramine-conjugated 4-arm poly(propylene oxide)–poly(ethylene oxide) micelles via enzyme-mediated reaction have potential as nanocarriers for controlled drug delivery.

Nanocomposite thermogel for controlled release of small proteins

A nanocomposite thermogel composed of Pluronic®-based multiblock copolymer and laponite nanoclay was developed to sustain delivery of low-molecular-weight proteins. The rapid release of low-molecular-weight proteins from multiblock copolymer thermogels has been a problem for sustained delivery but was solved by using nanocomposite thermogel. Lysozyme (Mw = 14,700), a relatively low-molecular-weight protein, was successfully loaded into and released from nanocomposite thermogel. In addition, interactions among multiblock copolymer, laponite, and lysozyme were studied in terms of gelation, micellization, particle size, and zeta potential. Critical micellization temperatures and sol–gel transition temperatures of multiblock copolymer solutions were lowered with laponite addition. Positively charged lysozyme was adsorbed onto anionic surface of laponite, which increased with an increase in the lysozyme concentration. Particle size and zeta potential of the laponite–lysozyme complex were also dependent on the lysozyme concentration. The nanocomposite thermogel sustained lysozyme release to 40 days, whereas lysozyme release from multiblock copolymer thermogel lasted for only 18 days. The structural stability of released lysozyme was confirmed by circular dichroism spectroscopy and differential scanning calorimetry.