The recent progress of tissue adhesives in design strategies, adhesive mechanism and applications

Tissue adhesives have emerged as an effective method for wound closure and hemostasis in recent decades, due to their ability to bond tissues together, preventing separation from one tissue to another. However, existing tissue adhesives still have several limitations. Tremendous efforts have been invested into developing new tissue adhesives by improving upon existing adhesives through different strategies. Therefore, highlighting and analyzing these design strategies are essential for developing the next generation of advanced adhesives. To this end, we reviewed the available strategies for modifying traditional adhesives (including cyanoacrylate glues, fibrin sealants and BioGlue), as well as design of emerging adhesives (including gelatin sealants, methacrylated sealants and bioinspired adhesives), focusing on their structures, adhesive mechanisms, advantages, limitations, and current applications. The bioinspired adhesives have numerous advantages over traditional adhesives, which will be a wise direction for achieving tissue adhesives with superior properties.

Enhanced sealing strength of a hydrophobically-modified Alaska pollock gelatin-based sealant

A novel tissue sealant composed of hydrophobically-modified Alaska pollock gelatin and polyethylene glycol-based crosslinker showed higher sealing effect than commercially available tissue sealant.

Mussel-inspired hydrogel tissue adhesives for wound closure

Tissue adhesives have been introduced as a promising alternative for the traditional wound closure method of suturing.

Bonding behavior of hydrophobically modified gelatin films on the intestinal surface

The bonding behavior was determined for hydrophobically modified alkaline-treated gelatin on wet porcine intestinal surfaces. The modified gelatin films were obtained by reacting the amino groups of alkaline-treated gelatin with fatty acid chlorides of different alkyl chain lengths, namely, hexanoyl (Hx: C6) chloride, decanoyl (Dec: C10) chloride, and stearoyl (Ste: C18) chloride. Three kinds of the films were prepared, 32HxAlGltn, 24DecAlGltn, and 26SteAlGltn that had substitution ratios of hydrophobic groups to the amino groups of 32HxAlGltn, 24DecAlGltn, and 26SteAlGltn of 32%, 24%, and 26%, respectively. The 32HxAlGltn film had the strongest bonding to porcine intestinal surfaces. A thick 32HxAlGltn film remained on the intestinal surface even after the bonded film was scraped off for the measurement of bonding strength. In addition, the burst strength increased with an increase in the substitution ratio of the Hx group. Thus, the HxAlGltn film with the higher Hx modification ratio has a potential as a sealant material to prevent agglutination of intestinal surfaces.

Prevention of catheter infection using a biodegradable tissue adhesive composed of human serum albumin and disuccinimidyl tartrate

A new material was prepared to reduce catheter infection composed of a flocked silicone sheet (AmTiO2NP-F) with TiO2 nanoparticle–immobilized poly(ethylene terephthalate) fibers modified with surface amino groups. This system was used in conjunction with a tissue adhesive composed of disuccinimidyl tartrate and human serum albumin. At a fixed disuccinimidyl tartrate content of 0.2 mmol in human serum albumin solution, AmTiO2NP-F bonded well with collagen-based casing (a model material for skin), with bond strength increasing to a maximum of 38 w/v% human serum albumin. The adhesive bonded AmTiO2NP-F to subcutaneous tissue in mice, and infiltration of the tissue into the AmTiO2NP-F further increased the bond strength for long-term insertions. The material was degraded within 7 days of implantation, and tissue reaction was mild, while infection was completely prevented. These results indicate that the combined use of AmTiO2NP-F and disuccinimidyl tartrate-A for implanted catheters can significantly alleviate the associated risk of infection.

Enhanced bonding strength of hydrophobically modified gelatin films on wet blood vessels

The bonding behavior between hydrophobically modified alkaline-treated gelatin (hm-AlGltn) films and porcine blood vessels was evaluated under wet conditions. Hexanoyl (Hx: C₆), decanoyl (Dec: C₁₀), and stearyl (Ste: C₁₈) chlorides were introduced into the amino groups of AlGltn to obtain HxAlGltn, DecAlGltn, and SteAlGltn, respectively, with various modification percentages. The hm-AlGltn was fabricated into films and thermally crosslinked to obtain water-insoluble films (t-hm-AlGltn). The 42% modified t-HxAlGltn (t-42HxAlGltn) possessed higher wettability than the 38% modified t-DecAlGltn (t-38DecAlGltn) and the 44% modified t-SteAlGltn (t-44SteAlGltn) films, and the t-42HxAlGltn film showed a high bonding strength with the blood vessel compared with all the hm-AlGltn films. Histological observations indicated that t-42HxAlGltn and t-38DecAlGltn remained on the blood vessel even after the bonding strength measurements. From cell culture experiments, the t-42HxAlGltn films showed significant cell adhesion compared to other films. These findings indicate that the Hx group easily interpenetrated the surface of blood vessels and effectively enhanced the bonding strength between the films and the tissue.

Biodegradable organic acid-crosslinked alkali-treated gelatins with anti-thrombogenic and endothelialization properties

Gelatins were crosslinked with organic acids and treated with alkali to impart to them endothelialization and anti-thrombogenic properties. These matrices were characterized by biochemical and physicochemical techniques. The amounts of residual amino groups in the matrices decreased with increasing crosslinker concentration. The matrices with the highest crosslinking densities showed excellent endothelial cell adhesion and proliferation. In addition, the adhesion of platelets and formation of fibrin networks on the matrices were suppressed with increasing crosslinker concentration. The matrices also exhibited excellent biodegradability, and the degradation rate decreased with increasing crosslinking density. All the organic acid-crosslinked alkali-treated gelatins showed excellent anti-thrombogenic and endothelialization properties, superior to those of glutaraldehyde-crosslinked alkali-treated gelatins.

In vitro evaluation of tissue adhesives composed of hydrophobically modified gelatins and disuccinimidyl tartrate

The effect of the hydrophobic group content in gelatin on the bonding strength of novel tissue-penetrating tissue adhesives was evaluated. The hydrophobic groups introduced into gelatin were the saturated hexanoyl, palmitoyl, and stearoyl groups, and the unsaturated oleoyl group. A collagen casing was employed as an adherend to model soft tissue for the in vitro determination of bonding strength of tissue adhesives composed of various hydrophobically modified gelatins and disuccinimidyl tartrate. The adhesive composed of stearoyl-modified gelatin (7.4% stearoyl; 10Ste) and disuccinimidyl tartrate showed the highest bonding strength. The bonding strength of the adhesives decreased as the degree of substitution of the hydrophobic groups increased. Cell culture experiments demonstrated that fluorescein isothiocyanate-labeled 10Ste was integrated onto the surface of smooth muscle cells and showed no cytotoxicity. These results suggest that 10Ste interacted with the hydrophobic domains of collagen casings, such as hydrophobic amino acid residues and cell membranes. Therefore, 10Ste-disuccinimidyl tartrate is a promising adhesive for use in aortic dissection.

Tamibarotene-loaded citric acid-crosslinked alkali-treated collagen matrix as a coating material for a drug-eluting stent

Tamibarotene-loaded biodegradable matrices with antithrombogenic and drug-releasing properties were prepared in a crosslinking reaction between amino groups of alkali-treated collagen (AlCol) and active ester groups of trisuccinimidyl citrate. The resulting matrices were characterized by their residual amino group concentrations, swelling ratios and thermal, antithrombogenic and drug-releasing properties. It was clarified that the addition of tamibarotene does not inhibit matrix formation. After immersion in water, the swelling ratio of a matrix became lower than that prior to immersion. Thermal analysis indicated that AlCol interacted with tamibarotene. The addition of tamibarotene to the matrix did not influence the antithrombogenic property of the resulting matrix. A matrix with a high crosslinking density had a prolonged tamibarotene elution time. These results demonstrate that tamibarotene-loaded matrices have great potential as a coating material for drug-eluting stents.