Facile Cell-Friendly Hollow-Core Fiber Diffusion-Limited Photofabrication

Bioprinting emerges as a powerful flexible approach for tissue engineering with prospective capability to produce tissue on demand, including biomimetic hollow-core fiber structures. In spite of significance for tissue engineering, hollow-core structures proved difficult to fabricate, with the existing methods limited to multistage, time-consuming, and cumbersome procedures. Here, we report a versatile cell-friendly photopolymerization approach that enables single-step prototyping of hollow-core as well as solid-core hydrogel fibers initially loaded with living cells. This approach was implemented by extruding cell-laden hyaluronic acid glycidyl methacrylate hydrogel directly into aqueous solution containing free radicals generated by continuous blue light photoexcitation of the flavin mononucleotide/triethanolamine photoinitiator. Diffusion of free radicals from the solution to the extruded structure initiated cross-linking of the hydrogel, progressing from the structure surface inwards. Thus, the cross-linked wall is formed and its thickness is limited by penetration of free radicals in the hydrogel volume. After developing in water, the hollow-core fiber is formed with centimeter range of lengths. Amazingly, HaCaT cells embedded in the hydrogel successfully go through the fabrication procedure. The broad size ranges have been demonstrated: from solid core to 6% wall thickness of the outer diameter, which was variable from sub-millimeter to 6 mm, and Young's modulus ∼1.6 ± 0.4 MPa. This new proof-of-concept fibers photofabrication approach opens lucrative opportunities for facile three-dimensional fabrication of hollow-core biostructures with controllable geometry.

Recent advances in polymer scaffolds for biomedical applications

The review provides insights into current advancements in electrospinning-assisted manufacturing for optimally designing biomedical devices for their prospective applications in tissue engineering, wound healing, drug delivery, sensing, and enzyme immobilization, and others. Further, the evolution of electrospinning-based hybrid biomedical devices using a combined approach of 3 D printing and/or film casting/molding, to design dimensionally stable membranes/micro-nanofibrous assemblies/patches/porous surfaces, etc. is reported. The influence of various electrospinning parameters, polymeric material, testing environment, and other allied factors on the morphological and physico-mechanical properties of electrospun (nano-/micro-fibrous) mats (EMs) and fibrous assemblies have been compiled and critically discussed. The spectrum of operational research and statistical approaches that are now being adopted for efficient optimization of electrospinning process parameters so as to obtain the desired response (physical and structural attributes) has prospectively been looked into. Further, the present review summarizes some current limitations and future perspectives for modeling architecturally novel hybrid 3 D/selectively textured structural assemblies, such as biocompatible, non-toxic, and bioresorbable mats/scaffolds/membranes/patches with apt mechanical stability, as biological substrates for various regenerative and non-regenerative therapeutic devices.

Full biodegradable elastomeric nanocomposites fabricated by chitin nanocrystal and poly(caprolactone-diol citrate) elastomer

Chitin nanocrystal is a biocompatible and biodegradable nanofiller, with great potential in enhancing the mechanical and biological properties of polymers. Poly(caprolactone-diol citrate) is a kind of citrate-based biodegradable elastomer prepared by an additive-free melt polycondensation of polycaprolactone-diol and citric acid coupled with subsequent thermocuring. Here, a facile casting/evaporation method was utilized to prepare full biodegradable poly(caprolactone-diol citrate)/chitin nanocrystal nanocomposites, and their structure and properties were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, uniaxial tensile test, dynamic mechanical analysis, surface wettability and swelling analysis, thermogravimetric analysis, in vitro degradation, and cytocompatibility test. The results showed the chitin nanocrystals were uniformly distributed in the poly(caprolactone-diol citrate) matrix; with increasing chitin nanocrystal loading, the tensile modulus and strength significantly increased; furthermore, the incorporation of chitin nanocrystals endowed the poly(caprolactone-diol citrate) with more hydrophilicity, lower swelling in phosphate buffered saline solution, slow degradation rate, and greatly improved cytocompatibility. Thus, the chitin nanocrystal was a good bio-based nanofiller that could be used to tune the properties of poly(caprolactone-diol citrate) degradable bioelastomer.