Transformable Carbonate Apatite Chains as a Novel Type of Bone Graft

The aging global population is generating an ever-increasing demand for bone regeneration. Various materials, including blocks, granules, and sponges, are developed for bone regeneration. However, blocks require troublesome shaping and exhibit poor bone-defect conformities; granules migrate into the surrounding tissues during and after filling of the defect, causing handling difficulties and complications; and sponges contain polymers that are subject to religious restrictions, lack osteoconductivity, and may cause inflammation and allergies. Herein, carbonate apatite chains that overcome the limitations of conventional materials are presented. Although carbonate apatite granules migrate, causing inflammation and ectopic calcification, the chains remain in the defects without causing any complications. The chains conform to the defect shape and transform into 3D porous structures, resulting in faster bone regeneration than that observed using granules. Thus, these findings indicate that even traditional calcium phosphates materials can be converted to state-of-the-art materials via shape control.

Biological Properties and Medical Applications of Carbonate Apatite: A Systematic Review

Bone defects represent an everyday challenge for clinicians who work in the fields of orthopedic surgery, maxillofacial and oral surgery, otorhinolaryngology, and dental implantology. Various bone substitutes have been developed and utilized, according to the needs of bone reconstructive surgery. Carbonate apatite has gained popularity in recent years, due to its excellent tissue behavior and osteoconductive potential. This systematic review aims to evaluate the role of carbonate apatite in bone reconstructive surgery and tissue engineering, analyze its advantages and limitations, and suggest further directions for research and development. The Web of Science, PubMed, and Scopus electronic databases were searched for relevant review articles, published from January 2014 to 21 July 2023. The study was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Eighteen studies were included in the present review. The biological properties and medical applications of carbonate apatite (CO3Ap) are discussed and evaluated. The majority of articles demonstrated that CO3Ap has excellent biocompatibility, resorbability, and osteoconductivity. Furthermore, it resembles bone tissue and causes minimal immunological reactions. Therefore, it may be successfully utilized in various medical applications, such as bone substitution, scaffolding, implant coating, drug delivery, and tissue engineering.

Osseointegration enhancement by controlling dispersion state of carbonate apatite in polylactic acid implant

Osteoconductive ceramics (OCs) are often used to endow polylactic acid (PLA) with osseointegration ability. Conventionally, OC powder is dispersed in PLA. However, considering cell attachment to the implant, OCs may be more favorable when they exist in the form of aggregations, such as granules, and are larger than the cells rather than being dispersed like a powder. In this study, to clarify the effects of the dispersion state of OCs on the osseointegration ability, carbonate apatite (CAp), a bone mineral analog that is osteoconductive and bioresorbable, powder-PLA (P-PLA), and CAp granule-PLA (G-PLA) composite implants were fabricated via thermal pressing. The powder and granule sizes of CAp were approximately 1 and 300-600 µm, respectively. G-PLA exhibited a higher water wettability and released calcium and phosphate ions faster than P-PLA. When cylindrical G-PLA, P-PLA, and PLA were implanted in rabbit tibial bone defects, G-PLA promoted bone maturation compared to P-PLA and pure PLA. Furthermore, G-PLA bonded directly to the host bone, whereas P-PLA bonded across the osteoid layers. Consequently, the bone-to-implant contact of G-PLA was 1.8- and 5.6-fold higher than those of P-PLA and PLA, respectively. Furthermore, the adhesive shear strength of G-PLA was 1.9- and 3.0-fold higher than those of P-PLA and PLA, respectively. Thus, G-PLA achieved earlier and stronger osseointegration than P-PLA or PLA. The findings of this study highlight the significance of the state of dispersion of OCs in implants as a novel strategy for material development.

Effects of Scaffold Shape on Bone Regeneration: Tiny Shape Differences Affect the Entire System

Although studies on scaffolds for tissue generation have mainly focused on the chemical composition and pore structure, the effects of scaffold shape have been overlooked. Scaffold shape determines the scaffold surface area (SA) at the single-scaffold level (i.e., microscopic effects), although it also affects the amount of interscaffold space in the tissue defect at the whole-system level (i.e., macroscopic effects). To clarify these microscopic and macroscopic effects, this study reports the osteogenesis abilities of three types of carbonate apatite granular scaffolds with different shapes, namely, irregularly shaped dense granules (DGs) and two types of honeycomb granules (HCGs) with seven hexagonal channels (∼255 μm in length between opposite sides). The HCGs possessed either 12 protuberances (∼75 μm in length) or no protuberances. Protuberances increased the SA of each granule by 3.24 mm2 while also widening interscaffold spaces and increasing the space percentage in the defect by ∼7.6%. Interscaffold spaces were lower in DGs than HCGs. On DGs, new bone formed only on the surface, whereas on HCGs, bone simultaneously formed on the surface and in intrascaffold channels. Interestingly, HCGs without protuberances formed approximately 30% more new bone than those with protuberances. Thus, even tiny protuberances on the scaffold surface can affect the percentage of interscaffold space, thereby exerting dominant effects on osteogenesis. Our findings demonstrate that bone regeneration can be improved by considering macroscopic shape effects beyond the microscopic effects of the scaffold.

Electrochemical and In Vitro Biological Evaluation of Bio-Active Coatings Deposited by Magnetron Sputtering onto Biocompatible Mg-0.8Ca Alloy

The use of resorbable magnesium alloys in the design of implants represents a new direction in the healthcare domain. Two main research avenues are currently explored for developing or improving metallic biomaterials: (i) increase of their corrosion resistance by designed compositional and structural modifications, and (ii) functionalization of their surfaces by coating with ceramic or polymeric layers. The main objective of this work was to comparatively assess bio-functional coatings (i.e., highly-crystallized hydroxyapatite and silica-rich glass) deposited by radio-frequency magnetron sputtering (RF-MS) on a biodegradable Mg-0.8Ca alloy (0.8 wt.% of Ca). After probing their morphology (by scanning electron microscopy) and structure (by Fourier transform infrared spectroscopy and grazing incidence X-ray diffraction), the corrosion resistance of the RF-MS coated Mg-0.8Ca substrates was electrochemically tested (in synthetic biological media with different degrees of biomimicry), and their cytocompatibility was assessed in osteoblast and fibroblast cell cultures. By collective assessment, the most promising performances, in terms of mass loss (~7% after 12 days), hydrogen release rate (~6 mL/cm² after 12 days), electrochemical corrosion parameters and cytocompatibility, were obtained for the crystalline HA coating.

Effects of the carbonate content in carbonate apatite on bone replacement

Carbonate apatite (CO₃ Ap), an inorganic component of human bone, has been clinically applied as an artificial bone substitute. In this study, the effects of the CO₃ content in CO₃ Ap on the replacement by new bone were studied by fabricating CO₃ Ap granules containing 0.9-8.3 wt% of CO₃ . The dissolution rate of CO₃ Ap in a weak acidic solution, mimicking the Howship's lacunae, was rapid for the CO₃ Ap granules containing a larger amount of CO₃ . Histological analyses demonstrated the rapid resorption in CO₃ Ap and replacement by natural bone tissue when the CO₃ content was increased. Therefore, the CO₃ content in CO₃ Ap is a key factor that influences the replacement of the bone tissue.

Application of low-crystalline carbonate apatite granules in 2-stage sinus floor augmentation: a prospective clinical trial and histomorphometric evaluation

Purpose

The purpose of this study was to elucidate the efficacy and safety of carbonate apatite (CO₃Ap) granules in 2-stage sinus floor augmentation through the radiographic and histomorphometric assessment of bone biopsy specimens.

Methods

Two-stage sinus floor augmentation was performed on 13 patients with a total of 17 implants. Radiographic assessment using panoramic radiographs was performed immediately after augmentation and was also performed 2 additional times, at 7±2 months and 18±2 months post-augmentation, respectively. Bone biopsy specimens taken from planned implant placement sites underwent micro-computed tomography, after which histological sections were prepared.

Results

Postoperative healing of the sinus floor augmentation was uneventful in all cases. The mean preoperative residual bone height was 3.5±1.3 mm, and this was increased to 13.3±1.7 mm by augmentation with the CO₃Ap granules. The mean height of the augmented site had decreased to 10.7±1.9 mm by 7±2 months after augmentation; however, implants with lengths in the range of 6.5 to 11.5 mm could still be placed. The mean height of the augmented site had decreased to 9.6±1.4 mm by 18±2 months post-augmentation. No implant failure or complications were observed. Few inflammatory cells or foreign body giant cells were observed in the bone biopsy specimens. Although there were individual differences in the amount of new bone detected, new bone was observed to be in direct contact with the CO₃Ap granules in all cases, without an intermediate layer of fibrous tissue. The amounts of bone and residual CO₃Ap were 33.8%±15.1% and 15.3%±11.9%, respectively.

Conclusions

In this first demonstration, low-crystalline CO₃Ap granules showed excellent biocompatibility, and bone biopsy showed them to be replaced with bone in humans. CO₃Ap granules are a useful and safe bone substitute for two-stage sinus floor augmentation.

Histological comparison of three apatitic bone substitutes with different carbonate contents in alveolar bone defects in a beagle mandible with simultaneous implant installation

Since bone apatite is a carbonate apatite containing carbonate in an apatitic structure, carbonate content may be one of the factors governing the osteoconductivity of apatitic bone substitutes. The aim of this study was to evaluate the effects of carbonate content on the osteoconductivity of apatitic bone substitutes using three commercially available bone substitutes for the reconstruction of alveolar bone defects of a beagle mandible with simultaneous dental implant installation. NEOBONE, Bio-Oss, and Cytrans that contain 0.1, 5.5, and 12.0 mass% of carbonate, respectively, were used in this study. The amount of newly formed bone in the upper portion of the alveolar bone defect of the beagle's mandible was 0.7, 6.6, and 39.4% at 4 weeks after surgery and 4.7, 39.5, and 75.2% at 12 weeks after surgery for NEOBONE, Bio-Oss, and Cytrans, respectively. The results indicate that bone-to-implant contact ratio was the largest for Cytrans. Additionally, the continuity of the alveolar ridge was restored in the case of Cytrans, whereas the continuity of the alveolar ridge was not sufficient when using NEOBONE and Bio-Oss. Both Cytrans and Bio-Oss that have a relatively larger carbonate content in their apatitic structure was resorbed with time. We concluded that carbonate content is one of important factors governing the osteoconductivity of apatitic bone substitutes.

Maxillary Sinus Floor Augmentation Using Low-Crystalline Carbonate Apatite Granules With Simultaneous Implant Installation: First-in-Human Clinical Trial

PURPOSE

Carbonate apatite (CO₃Ap), an inorganic component of human bone, can be fabricated in chemically pure form from calcium carbonate block via a dissolution-precipitation reaction. A first-in-human clinical trial was conducted in which low-crystalline CO₃Ap granules were evaluated for safety and efficacy in sinus floor augmentation and simultaneous implant installation.

MATERIALS AND METHODS

Procedures were performed in 8 patients (9 implants) with 2 granule sizes: small (300 to 600 μm) and medium (600 to 1,000 μm). Panoramic radiographic assessment was performed immediately after augmentation, 7 ± 2 months after augmentation, 6 ± 2 months after prosthetic loading, and 12 ± 2 months after prosthetic loading.

RESULTS

Postoperative healing was uniformly uneventful, with no abnormal bleeding, pain, or swelling, and all implants achieved successful osseointegration. The mean residual maxillary molar bone height was 5.2 ± 0.8 mm preoperatively and increased to 14.0 ± 1.9 mm after augmentation. Implants 9.0 to 11.5 mm in length were placed. The post-augmentation height decreased to 12.4 ± 1.3 mm at 7 ± 2 months; after prosthetic loading, it decreased to 11.9 ± 0.8 mm at 6 ± 2 months and 11.7 ± 0.6 mm at 12 ± 2 months. No abnormal bone resorption of the augmented areas was observed, and bone height supporting the implants was maintained. The overall implant survival rate was 100%, with no implant failures or complications during the first year.

CONCLUSIONS

Low-crystalline CO₃Ap granules were useful and safe for sinus floor augmentation and simultaneous implant installation, providing a promising bone substitute for dental implant surgery.