Drug-Loaded Bioscaffolds for Osteochondral Regeneration

Osteochondral defect is a complex tissue loss disease caused by arthritis, high-energy trauma, and many other reasons. Due to the unique structural characteristics of osteochondral tissue, the repair process is sophisticated and involves the regeneration of both hyaline cartilage and subchondral bone. However, the current clinical treatments often fall short of achieving the desired outcomes. Tissue engineering bioscaffolds, especially those created via three-dimensional (3D) printing, offer promising solutions for osteochondral defects due to their precisely controllable 3D structures. The microstructure of 3D-printed bioscaffolds provides an excellent physical environment for cell adhesion and proliferation, as well as nutrient transport. Traditional 3D-printed bioscaffolds offer mere physical stimulation, while drug-loaded 3D bioscaffolds accelerate the tissue repair process by synergistically combining drug therapy with physical stimulation. In this review, the physiological characteristics of osteochondral tissue and current treatments of osteochondral defect were reviewed. Subsequently, the latest progress in drug-loaded bioscaffolds was discussed and highlighted in terms of classification, characteristics, and applications. The perspectives of scaffold design, drug control release, and biosafety were also discussed. We hope this article will serve as a valuable reference for the design and development of osteochondral regenerative bioscaffolds and pave the way for the use of drug-loaded bioscaffolds in clinical therapy.

Influence of physicochemical characteristics of calcium phosphate-based biomaterials in cranio-maxillofacial bone regeneration. A systematic literature review and meta-analysis of preclinical models

Objectives

Calcium phosphate-based biomaterials (CaP) are the most widely used biomaterials to enhance bone regeneration in the treatment of alveolar bone deficiencies, cranio-maxillofacial and periodontal infrabony defects, with positive preclinical and clinical results reported. This systematic review aimed to assess the influence of the physicochemical properties of CaP biomaterials on the performance of bone regeneration in preclinical animal models.

Methods

The PubMed, EMBASE and Web of Science databases were searched to retrieve the preclinical studies investigating physicochemical characteristics of CaP biomaterials. The studies were screened for inclusion based on intervention (physicochemical characterization and in vivo evaluation) and reported measurable outcomes.

Results

A total of 1532 articles were retrieved and 58 studies were ultimately included in the systematic review. A wide range of physicochemical characteristics of CaP biomaterials was found to be assessed in the included studies. Despite a high degree of heterogeneity, the meta-analysis was performed on 39 studies and evidenced significant effects of biomaterial characteristics on their bone regeneration outcomes. The study specifically showed that macropore size, Ca/P ratio, and compressive strength exerted significant influence on the formation of newly regenerated bone. Moreover, factors such as particle size, Ca/P ratio, and surface area were found to impact bone-to-material contact during the regeneration process. In terms of biodegradability, the amount of residual graft was determined by macropore size, particle size, and compressive strength.

Conclusion

The systematic review showed that the physicochemical characteristics of CaP biomaterials are highly determining for scaffold's performance, emphasizing its usefulness in designing the next generation of bone scaffolds to target higher rates of regeneration.

Bone Regeneration with Mesenchymal Stem Cells in Scaffolds: Systematic Review of Human Clinical Trials

The aim of the study is to determine the effectiveness of stem cells in scaffolds in the treatment of bone deficits, in regard of bone regeneration, safety, rehabilitation and quality of life in humans. The systematic review was conducted in accordance with PRISMA 2020. A systematic search was conducted in three search engines and two registries lastly in 29-9-2022.for studies of the last 15 years. The risk of bias was assessed with RoB-2, ROBINS- I and NIH Quality of Before-After (Pre-Post) Studies with no Control group. The certainty of the results was assessed with the GRADE assessment tool. Due to heterogeneity, the results were reported in tables, graphs and narratively. The study protocol was published in PROSPERO with registration number CRD42022359049. Of the 10,091 studies retrieved, 14 were meeting the inclusion criteria, and were qualitatively analyzed. 138 patients were treated with mesenchymal stem cells in scaffolds, showing bone healing in all cases, and even with better results than the standard care. The adverse events were mild in most cases and in accordance with the surgery received. When assessed, there was a rehabilitation of the deficit and a gain in quality of life was detected. Although the heterogeneity between the studies and the small number of patients, the administration of mesenchymal stem cells in scaffolds seems safe and effective in the regeneration of bone defects. These results pave the way for the conduction of more clinical trials, with greater number of participants, with more standardized procedures.

Regulating macrophage-MSC interaction to optimize BMP-2-induced osteogenesis in the local microenvironment

Bone morphogenetic protein (BMP-2) has been approved by the FDA to promote bone regeneration, but uncertain osteogenic effect and dose-dependent side effects may occur. Osteoimmunomodulation plays an important role in growth factor-based osteogenesis. Here, we explored how proinflammatory signals affect the dose-dependent osteogenic potential of BMP-2. We observed that the expression level of local IL-1β did not increase with the dose of BMP-2 in the mouse osteogenesis model. A low dose of BMP-2 could not promote new bone formation, but trigger the release of IL-1β from M1 macrophages. As the dose of BMP-2 increased, the IL-1β expression and M1 infiltration in local microenvironment were inhibited by IL-1Ra from MSCs under osteogenic differentiation induced by BMP-2, and new bone tissues formed, even excessively. Anti-inflammatory drugs (Dexamethasone, Dex) promoted osteogenesis via inhibiting M1 polarization and enhancing BMP-2-induced MSC osteo-differentiation. Thus, we suggest that the osteogenic effect of BMP-2 involves macrophage-MSC interaction that is dependent on BMP-2 dose and based on IL-1R1 ligands, including IL-1β and IL-1Ra. The dose of BMP-2 could be reduced by introducing immunoregulatory strategies.

Calcium-to-phosphorus releasing ratio affects osteoinductivity and osteoconductivity of calcium phosphate bioceramics in bone tissue engineering

Calcium phosphate (Ca-P) bioceramics, including hydroxyapatite (HA), biphasic calcium phosphate (BCP), and beta-tricalcium phosphate (β-TCP), have been widely used in bone reconstruction. Many studies have focused on the osteoconductivity or osteoinductivity of Ca-P bioceramics, but the association between osteoconductivity and osteoinductivity is not well understood. In our study, the osteoconductivity of HA, BCP, and β-TCP was investigated based on the osteoblastic differentiation in vitro and in situ as well as calvarial defect repair in vivo, and osteoinductivity was evaluated by using pluripotent mesenchymal stem cells (MSCs) in vitro and heterotopic ossification in muscles in vivo. Our results showed that the cell viability, alkaline phosphatase activity, and expression of osteogenesis-related genes, including osteocalcin (Ocn), bone sialoprotein (Bsp), alpha-1 type I collagen (Col1a1), and runt-related transcription factor 2 (Runx2), of osteoblasts each ranked as BCP > β-TCP > HA, but the alkaline phosphatase activity and expression of osteogenic differentiation genes of MSCs each ranked as β-TCP > BCP > HA. Calvarial defect implantation of Ca-P bioceramics ranked as BCP > β-TCP ≥ HA, but intramuscular implantation ranked as β-TCP ≥ BCP > HA in vivo. Further investigation indicated that osteoconductivity and osteoinductivity are affected by the Ca/P ratio surrounding the Ca-P bioceramics. Thus, manipulating the appropriate calcium-to-phosphorus releasing ratio is a critical factor for determining the osteoinductivity of Ca-P bioceramics in bone tissue engineering.

A systematic review and meta-analyses on animal models used in bone adhesive research

Currently, steel implants are used for osteosynthesis of (comminuted) fractures and intra-articular bone defects. These osteosyntheses can sometimes be complicated procedures and can have several drawbacks including stress shielding of the bone. A bone glue might be a safe and effective alternative to current materials. Despite numerous animal studies on bone adhesives, no such material is clinically applied yet. We have conducted a systematic review to summarize the evidence in experimental animal models used in research on bone adhesive materials for trauma and orthopedic surgery. Additionally, we analysed the efficacy of the different bone adhesives for different experimental designs. A heterogeneity in experimental parameters including animal species, defect types, and control measurements resulted in a wide variety in experimental models. In addition, no standard outcome measurements could be identified. Meta-analysis on bone regeneration between adhesive treatment and nonadhesive treatment showed a high heterogeneity and no statistically significant overall effect (M: -0.71, 95% confidence interval [CI]: -1.63-0.21, p = 0.13). Besides, currently there is not enough evidence to draw conclusions based on the effectiveness of the individual types of adhesives or experimental models. A positive statistically significant effect was found for the adhesive treatment in comparison with conventional osteosynthesis materials (M: 2.49, 95% CI: 1.20-3.79, p = 0.0002). To enhance progression in bone adhesive research and provide valuable evidence for clinical application, more standard experimental parameters and a higher reporting quality in animal studies are needed. Statement of Clinical Significance: Current materials restoring anatomical alignments of bones have several drawbacks. A (biodegradable) adhesive for fixating bone defects can be a treatment breakthrough. Although numerous bone adhesives have been researched, most seemed to fail at the preclinical stage. An overview in this field is missing. This systematic review highlights the relevant parameters for design of experimental bone adhesive studies. It demonstrates evidence regarding benefit of bone adhesives but also that the quality of reporting and the risk of bias in studies need to be improved. The results will aid in designing better quality animal studies for bone adhesive research with higher translational value.

Illuminating the Regenerative Microenvironment: Emerging Quantitative Imaging Technologies for Craniofacial Bone Tissue Engineering

Tissue engineering has the potential to revolutionize treatments for patients suffering from critical-sized craniofacial bone defects, but it has yet to make a substantial impact in clinical practice. One of the barriers to improving the design of tissue-engineered bone grafts (TEBGs) is the lack of adequate techniques to study how transplanted cells, host cells, and biomaterials interact to facilitate the dynamic healing process. In this perspective, we discuss recent advances in quantitative imaging that may be adapted to provide high spatiotemporal resolution of the 3D tissue microenvironment during cranial bone regeneration. The adoption and application of these imaging technologies will provide a more rigorous framework for evaluating TEBG performance and enable the development of next-generation TEBGs for craniofacial repair.

Development of a Gene-Activated Scaffold Incorporating Multifunctional Cell-Penetrating Peptides for pSDF-1α Delivery for Enhanced Angiogenesis in Tissue Engineering Applications

Non-viral gene delivery has become a popular approach in tissue engineering, as it permits the transient delivery of a therapeutic gene, in order to stimulate tissue repair. However, the efficacy of non-viral delivery vectors remains an issue. Our lab has created gene-activated scaffolds by incorporating various non-viral delivery vectors, including the glycosaminoglycan-binding enhanced transduction (GET) peptide into collagen-based scaffolds with proven osteogenic potential. A modification to the GET peptide (FLR) by substitution of arginine residues with histidine (FLH) has been designed to enhance plasmid DNA (pDNA) delivery. In this study, we complexed pDNA with combinations of FLR and FLH peptides, termed GET* nanoparticles. We sought to enhance our gene-activated scaffold platform by incorporating GET* nanoparticles into collagen-nanohydroxyapatite scaffolds with proven osteogenic capacity. GET* N/P 8 was shown to be the most effective formulation for delivery to MSCs in 2D. Furthermore, GET* N/P 8 nanoparticles incorporated into collagen-nanohydroxyapatite (coll-nHA) scaffolds at a 1:1 ratio of collagen:nanohydroxyapatite was shown to be the optimal gene-activated scaffold. pDNA encoding stromal-derived factor 1α (pSDF-1α), an angiogenic chemokine which plays a role in BMP mediated differentiation of MSCs, was then delivered to MSCs using our optimised gene-activated scaffold platform, with the aim of significantly increasing angiogenesis as an important precursor to bone repair. The GET* N/P 8 coll-nHA scaffolds successfully delivered pSDF-1α to MSCs, resulting in a significant, sustained increase in SDF-1α protein production and an enhanced angiogenic effect, a key precursor in the early stages of bone repair.

Enabling technologies towards personalization of scaffolds for large bone defect regeneration

Additive manufacturing (AM) can deliver personalized scaffolds to support large volume defect tissue regeneration - a major clinical challenge in many medical disciplines. The freedom in scaffold design and composition (biomaterials and biologics) offered by AM yields a plethora of possibilities but is confronted with a heterogenous biological regeneration potential across individuals. A key challenge is to make the right choice for individualized scaffolds that match biology, anatomy, and mechanics of patients. This review provides an overview of state-of-the-art technologies, that is, in silico modelling for scaffold design, omics and bioinformatics to capture patient biology and information technology for data management, that, when combined in a synergistic way with AM, have great potential to make personalized tissue regeneration strategies available to all patients, empowering precision medicine.

Gene transfection achieved by utilizing antibacterial calcium phosphate nanoparticles for enhanced regenerative therapy

Protamine-coated multi-shell calcium phosphate (CaP) was developed as a non-viral vector for tissue regeneration therapy. CaP nanoparticles loaded with different amounts of plasmid DNA encoding bone morphogenetic protein 2 (BMP-2) and insulin-like growth factor 1 (IGF-1) were used to treat MC3T3E1 cells, and the yield of the released BMP-2 or IGF-1 was measured using ELISA 3 days later. Collagen scaffolds containing CaP nanoparticles were implanted into rat cranial bone defects, and BMP-2 and IGF-1 yields, bone formation, and bone mineral density enhancement were evaluated 28 days after gene transfer. The antibacterial effects of CaP nanoparticles against Streptococcus mutans and Aggregatibacter actinomycetemcomitans increased with an increase in the protamine dose, while they were lower for Staphylococcus aureus and Porphyromonas gingivalis. In the combination treatment with BMP-2 and IGF-1, the concentration ratio of BMP-2 and IGF-1 is an important factor affecting bone formation activity. The calcification activity and OCN mRNA of MC3T3E1 cells subjected to a BMP-2:IGF-1 concentration ratio of 1:4 was higher at 14 days. During gene transfection treatment, BMP-2 and IGF-1 were released simultaneously after gene transfer; the loaded dose of the plasmid DNA encoding IGF-1 did not impact the BMP-2 or IGF-1 yield or new bone formation ratio in vitro and in vivo. In conclusion, two growth factor-releasing systems were developed using an antibacterial gene transfer vector, and the relationship between the loaded plasmid DNA dose and resultant growth factor yield was determined in vitro and in vivo.

Implants with a Laser-microgrooved Collar Placed in Grafted Posterior Maxillary Extraction Sockets and in Crestally Grafted Sinuses: a 5-Year Multicentre Retrospective Study

Objectives

The aim of this retrospective multicentre cohort study was to compare clinical outcomes, soft tissues conditions and differences in marginal bone loss between implants with a laser-microgrooved collar placed in posterior maxillary extraction sockets grafted by 4 to 5 months, and in posterior maxillary pristine bone (spontaneously healed posterior maxillary extraction sockets) by means of osteotome-mediated sinus floor elevation, over a period of 5 years after functional loading.

Material and Methods

Patients of Group 1 underwent extractions with sockets preservation using porcine-derived bone, covered with collagen membrane. Group 2 underwent extractions without socket preservation. Patients of Group 1 received implants in grafted sites, and Group 2 received implants in spontaneously healed bone using a maxillary sinus lift with crestal approach.

Results

Over the observation period, the overall clinical success rate in Group 1 and Group 2 was 98% and 100%, respectively, with no differences between the procedures and implants used. Cumulative radiographic marginal bone loss ranged from 0.03 to 0.39 mm after 60 months of functional loading. There were no statistically significant differences in marginal bone loss between short and standard-length implants placed in grafted extraction sockets and in pristine bone.

Conclusions

Short and standard implants with a laser-microgrooved collar, placed in posterior maxillary extraction sockets grafted by 4 to 5 months, and in posterior maxillary pristine bone (spontaneously healed posterior maxillary extraction sockets) by means of osteotome-mediated sinus floor elevation, exhibited no statistical difference in success rate, clinical parameters and marginal bone loss.

Fabrication and Biological Activity of 3D-Printed Polycaprolactone/Magnesium Porous Scaffolds for Critical Size Bone Defect Repair

Polycaprolactone (PCL) is widely used in bone tissue engineering due to its biocompatibility and mechanical strength. However, PCL is not biologically active and shows poor hydrophilicity, making it difficult for new bones to bind tightly to its surface. Magnesium (Mg), an important component of natural bone, exhibits good osteo-inductivity and biological activity. Therefore, porous PCL/Mg scaffolds, including pure PCL, PCL/5%Mg, PCL/10%Mg, and PCL/15%Mg, were prepared to elucidate whether the porous structure of scaffolds and the bioactivity of PCL may be enhanced via 3D printing and incorporation of Mg powder. Compared with the control group (pure PCL only), the hydrophilicity of composite PCL/Mg scaffolds was greatly increased, resulting in the scaffolds having decreased water contact angles. Tests for adhesion and proliferation of rat bone marrow mesenchymal stem cells (rBMSCs) indicated that the PCL/10%Mg scaffold showed superior compatibility. Furthermore, as indicated by alkaline phosphatase (ALP) activity and semiquantitative analysis of alizarin red staining, PCL/10%Mg scaffolds exhibited significantly stronger osteogenic activity than the other scaffolds. Animal experiments demonstrated that PCL/10%Mg scaffolds displayed pro-osteogenic effects at an early stage (4 weeks) and produced more new bone mass 8-12 weeks following implantation, compared with the control group. Visceral and blood parameter analyses indicated that PCL/10%Mg scaffolds did not exert any noticeable toxic effects. PCL/10%Mg composite scaffolds were found to promote bone defect repair at an early stage with good cytocompatibility. This finding revealed a new concept in designing bone tissue materials, which showed potential as a clinical treatment for bone defects.

A segmental defect adaptation of the mouse closed femur fracture model for the analysis of severely impaired bone healing

OBJECTIVE

To better characterize nonunion endochondral bone healing and evaluate novel therapeutic approaches for critical size defect healing in clinically challenging bone repair, a segmental defect model of bone injury was adapted from the three-point bending closed fracture technique in the murine femur.

METHODS

The mouse femur was surgically stabilized with an intramedullary threaded rod with plastic spacers and the defect adjusted to different sizes. Healing of the different defects was analyzed by radiology and histology to 8 weeks postsurgery. To determine whether this model was effective for evaluating the benefits of molecular therapy, BMP-2 was applied to the defect and healing then examined.

RESULTS

Intramedullary spacers were effective in maintaining the defect. Callus bone formation was initiated but was arrested at defect sizes of 2.5 mm and above, with no more progress in callus bone development evident to 8 weeks healing. Cartilage development in a critical size defect attenuated very early in healing without bone development, in contrast to the closed femur fracture healing, where callus cartilage was replaced by bone. BMP-2 therapy promoted osteogenesis of the resident cells of the defect, but there was no further callus development to indicate that healing to pre-surgery bone structure was successful.

CONCLUSIONS

This segmental defect adaptation of the closed femur fracture model of murine bone repair severely impairs callus development and bone healing, reflecting a challenging bone injury. It is adjustable and can be compared to the closed fracture model to ascertain healing deficiencies and the efficacy of therapeutic approaches.

Evaluation of scaffold microstructure and comparison of cell seeding methods using micro-computed tomography-based tools

Micro-computed tomography (micro-CT) provides a means to analyse and model three-dimensional (3D) tissue engineering scaffolds. This study proposes a set of micro-CT-based tools firstly for evaluating the microstructure of scaffolds and secondly for comparing different cell seeding methods. The pore size, porosity and pore interconnectivity of supercritical CO2 processed poly(l-lactide-co-ɛ-caprolactone) (PLCL) and PLCL/β-tricalcium phosphate scaffolds were analysed using computational micro-CT models. The models were supplemented with an experimental method, where iron-labelled microspheres were seeded into the scaffolds and micro-CT imaged to assess their infiltration into the scaffolds. After examining the scaffold architecture, human adipose-derived stem cells (hASCs) were seeded into the scaffolds using five different cell seeding methods. Cell viability, number and 3D distribution were evaluated. The distribution of the cells was analysed using micro-CT by labelling the hASCs with ultrasmall paramagnetic iron oxide nanoparticles. Among the tested seeding methods, a forced fluid flow-based technique resulted in an enhanced cell infiltration throughout the scaffolds compared with static seeding. The current study provides an excellent set of tools for the development of scaffolds and for the design of 3D cell culture experiments.

Sulfated polysaccharide-based scaffolds for orthopaedic tissue engineering

Given their native-like biological properties, high growth factor retention capacity and porous nature, sulfated-polysaccharide-based scaffolds hold great promise for a number of tissue engineering applications. Specifically, as they mimic important properties of tissues such as bone and cartilage they are ideal for orthopaedic tissue engineering. Their biomimicry properties encompass important cell-binding motifs, native-like mechanical properties, designated sites for bone mineralisation and strong growth factor binding and signaling capacity. Even so, scientists in the field have just recently begun to utilise them as building blocks for tissue engineering scaffolds. Most of these efforts have so far been directed towards in vitro studies, and for these reasons the clinical gap is still substantial. With this review paper, we have tried to highlight some of the important chemical, physical and biological features of sulfated-polysaccharides in relation to their chondrogenic and osteogenic inducing capacity. Additionally, their usage in various in vivo model systems is discussed. The clinical studies reviewed herein paint a promising picture heralding a brave new world for orthopaedic tissue engineering.

Heparin-Conjugated Decellularized Bone Particles Promote Enhanced Osteogenic Signaling of PDGF-BB to Adipose-Derived Stem Cells in Tissue Engineered Bone Grafts

Adipose-derived stem cells (ASCs) are a promising cell source for regenerating critical-sized craniofacial bone defects, but their clinical use is limited due to the supraphysiological levels of bone morphogenetic protein-2 required to induce bone formation in large grafts. It has been recently reported that platelet-derived growth factor-BB (PDGF) directly enhances the osteogenesis of ASCs when applied at physiological concentrations. In this study, a biomimetic delivery system that tethers PDGF to decellularized bone matrix (DCB) is developed to enhance osteogenic signaling in bone grafts by colocalizing PDGF-extracellular matrix cues. Heparin is conjugated to DCB particles (HC-DCB) to promote sustained binding of PDGF via electrostatic interactions. HC-DCB particles bind to PDGF with >99% efficiency and release significantly less PDGF over 21 days compared to nonconjugated DCB particles (1.1% vs 22.8%). HC-DCB-PDGF signaling in polycaprolactone (PCL)-fibrin grafts promotes >40 µg Ca²⁺ µg^-1 DNA deposition by ASCs during in vitro osteogenic culture compared to grafts without HC-DCB or PDGF. Furthermore, more bone formation is observed in grafts with HC-DCB-PDGF at 12 weeks following implantation of grafts into murine critical-sized calvarial defects. Collectively, these results demonstrate that HC-DCB enhances the osteogenic signaling of PDGF to ASCs and may be applied to promote ASC-mediated bone regeneration in critical-sized defects.

Effectiveness of Xenograft and Porcine-Derived Resorbable Membrane in Augmentation of Posterior Extraction Sockets with a Severe Wall Defect. A Radiographic/Tomographic Evaluation

Objectives

The aim of the present prospective study was to evaluate, by means of intraoral periapical radiographs and cone-beam computed tomography, hard tissue changes after ridge augmentation procedures in posterior extraction sockets with severe wall defects.

Material and Methods

Twenty patients, with a non-restorable premolar/molar tooth and severe wall defect, were enrolled in the present study, and underwent single-tooth extraction. Extraction sites were grafted with porcine-derived bone covered by porcine-derived collagen membrane. Intraoral periapical radiographs and cone-beam computed tomography scans, obtained at enrolment, and 6 months after ridge augmentation procedures were analysed and compared.

Results

In the intraoral periapical radiographs, mean vertical bone gains detected at the distal, central and mesial aspects of the extraction sockets were 3.5 (SD 1.1) mm, 8.2 (SD 2.1) mm, and 3.9 (SD 1.7) mm, respectively. In the cone-beam computed tomography scans, the mean vertical bone gains detected at the more vestibular and more palatal aspects were 4.4 (SD 1.9) mm, and 3.3 (SD 2.8) mm, respectively. The mean horizontal bone gain was 3.5 (SD 1.6) mm. In all examined defects, mean vertical and horizontal bone levels showed a statistically significant increase (P < 0.05) at 6 months after extraction.

Conclusions

Within the limits of this study, the results suggest that porcine-derived bone graft covered by a collagen membrane can support significant vertical and horizontal bone gain at posterior post-extraction sockets with severe wall defects.

Comparison of the bone augmentation ability of absorbable collagen sponge with that of hydroxyapatite/collagen composite

The present study was designed to compare the bone augmentation ability of absorbable collagen sponge (ACS) with that of hydroxyapatite/collagen composite (HAP/Col) using a rat calvaria defect model. Bone defects were created artificially on the surface of the calvariae of 10-week-old male Fisher rats, and then cylindral plastic caps filled with ACS or HAP/Col were placed on the defects. This area was designated as the region of interest (ROI) and new bone formation was observed at 0, 4, 8, and 12 weeks after surgery using micro-CT. Histological examinations were performed using sections obtained from 12-week-old rats. Prominent new bone formation was observed in the HAP/Col group relative to the ACS group; onset of new bone augmentation was evident from 4 weeks after surgery in the HAP/Col group and from 8 weeks in the ACS group. Histological examination revealed that the entire area of the cap was filled with newly formed bone intermingled with the HAP/Col composite. Bone mineral density in the HAP/Col group was double that in the ACS group. These results indicate that the use of HAP/Col contributes significantly to new bone augmentation.

Histologic and Histomorphometric Analysis of Bone Regeneration with Bovine Grafting Material after 24 Months of Healing. A Case Report

Anorganic bovine bone mineral matrix (ABBMM) has been reported to have osteoconductive properties and no inflammatory or adverse responses when used as grafting material in sinus augmentation procedures. However, controversy remains in regard to degradation rate of ABBMM. The aim of this study was to histologically and histomorphometrically evaluate the degradation of ABBMM in human bone samples obtained in one patient 24 months after sinus augmentation. Materials and Methods: The histologic and histomorphometric analysis was performed by means of light microscopy in three specimens harvested from the same patient, Results: After 24 months the tissue pattern appeared to be composed of residual particles, some in close contact with the newly formed bone, others separated by translucent areas and osteoid tissues. Newly-formed bone presented different levels of maturation and numerous osteocytes, with greater numbers in bone closer to the grafted particles (27.3% vs. 11.2%, p < 0.05). The histomorphometric analysis showed mean values of 40.84% newly-formed bone, 33.58% residual graft material, 23.84% marrow spaces, and 1.69% osteoid tissue, Conclusions: Even though ABBMM underwent considerable resorption, a great amount of residual grafting material was still present after two years of healing following sinus augmentation. This study confirms that the bovine grafts can be classified as long-term degradation materials.

Prolonged release of bone morphogenetic protein-2 in vivo by gene transfection with DNA-functionalized calcium phosphate nanoparticle-loaded collagen scaffolds

In the combination of scaffolds immersed in growth factor solutions, the release of growth factors mainly depends on scaffold degradation. However, the release of bone morphogenetic protein (BMP)-2 at an appropriate concentration during the stage of tissue regeneration would enhance bone regeneration. To achieve this condition, the present study was performed to investigate the effects of scaffolds combined with gene transfection using non-viral vectors. Nanohydroxyapatite-collagen (nHAC) scaffolds cross-linked with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) or ascorbic acid/copper chloride, and a collagen scaffold (Terdermis®) were prepared, loaded with BMP-2-encoding plasmid DNA-functionalized calcium phosphate nanoparticles (CaP), naked plasmid DNA, or BMP-2 solution, and implanted in rats. The yield of released BMP-2 and its releasing period, respectively, were larger and longer from the scaffolds loaded with CaP than from those incubated with BMP-2 solution. In addition, the alkaline phosphatase activity induced by the CaP-loaded scaffolds was higher. Histological analysis showed that released BMP-2 could be observed on the macrophages or multinuclear giant cells surrounding the nHAC fragments or collagen fibres. TRAP-positive or OCN-positive sites were observed in all groups and a mineralization area was observed in the Terdermis®/CaP sample. The present study demonstrates that gene transfection by scaffold loaded with CaP gene transfer vectors induces a larger yield of BMP-2 for a longer period than by scaffolds loaded with BMP-2 solution or naked plasmid.

A review of biomaterials in bone defect healing, remaining shortcomings and future opportunities for bone tissue engineering: The unsolved challenge

Despite its intrinsic ability to regenerate form and function after injury, bone tissue can be challenged by a multitude of pathological conditions. While innovative approaches have helped to unravel the cascades of bone healing, this knowledge has so far not improved the clinical outcomes of bone defect treatment. Recent findings have allowed us to gain in-depth knowledge about the physiological conditions and biological principles of bone regeneration. Now it is time to transfer the lessons learned from bone healing to the challenging scenarios in defects and employ innovative technologies to enable biomaterial-based strategies for bone defect healing. This review aims to provide an overview on endogenous cascades of bone material formation and how these are transferred to new perspectives in biomaterial-driven approaches in bone regeneration.

Cite this article: T. Winkler, F. A. Sass, G. N. Duda, K. Schmidt-Bleek. A review of biomaterials in bone defect healing, remaining shortcomings and future opportunities for bone tissue engineering: The unsolved challenge. Bone Joint Res 2018;7:232–243. DOI: 10.1302/2046-3758.73.BJR-2017-0270.R1.

Caveolae-mediated mesenchymal stem cell labelling by PSS-coated PLGA PFOB nano-contrast agent for MRI

Rationale: Non-invasive tracking of transplanted cells is critical in evaluating delivery, migration and prognosis of cell therapies.

Methods: We formulated a nano-contrast agent consisting of a perfluorooctylbromide (PFOB) core within a shell of poly (lactic-co-glycolic acid) (PLGA) followed by a coat of polystyrene sulfonate (PSS) for ¹⁹F MRI. The nano-contrast agent (PSS-NP) was characterised by DLS and the uptake efficiency of the nano-contrast agent (PSS-NP) was tested using flow cytometry, in vitro MRI and confocal microscopy. In vitro and in vivo assays of labelled cells were tested for their ability to provide an MRI signal while retaining their osteoblastic differentiation capabilities.

Results: PSS-NPs were internalised via caveolae-mediated endocytosis in mesenchymal stromal/stem cells without affecting cell proliferation and differentiation in osteoblasts, both in vitro and in vivo. Furthermore, labelled cells were monitored by ¹⁹F MRI for up to 2 months after transplantation in mice. In particular, PSS-NP-labelled cells can be used to monitor the enhanced immune rejection of grafted human cells in normal BALB/c mice compared to immune-compromised NOD/SCID mice. One week after transplantation, 40% of the ¹⁹F MRI signal was lost in normal mice, whereas only 10% was lost in immune-compromised mice.

Conclusion: Overall, these results show that PSS-NPs can label MSCs effectively, and be employed in vivo as a novel nano-contrast agent for non-invasive cell tracking using clinically relevant ¹⁹F MRI techniques.

Bone Healing in Extraction Sockets Covered With Collagen Membrane Alone or Associated With Porcine-Derived Bone Graft: a Comparative Histological and Histomorphometric Analysis

Objectives

The present paper reports data of a randomized study aimed to analyse and compare the histologic and histomorphometric aspects of bone healing in extraction sites covered with collagen membrane alone or associated with porcine-derived bone graft.

Material and Methods

Thirty patients, with single extraction sockets without severe bone wall defects in the premolar/molar region, were included. Ten extraction sockets were grafted with porcine-derived bone and covered with collagen membrane (group 1), 10 sites were covered with collagen membrane alone (group 2), and 10 sites healed spontaneously (group 3). After 4 months of healing, 26 (8 in group 1, 9 in group 2, and 9 in group 3) bone core specimens were harvested for histologic evaluation, then dental implants were placed.

Results

Sites in the group 1 and in the group 2 showed similar histologic and histomorphometric results without significantly differences in the percentage of vital bone (57.43% [SD 4.8] vs. 60.01% [SD 3.2]), and non-mineralized connective tissue 22.99% (SD 5.3) vs. 18.53% (SD 6.2). In group 1 a 16.57% (SD 3.8) of residual material was found.

Conclusions

Results showed that the use of collagen membrane alone or associated to porcine-derived bone improves the healing bone process compared to that of extraction sites spontaneously healed. Moreover, histomorphometric data related to bone quality, indicated that extraction sites without severe walls defects and with a vestibular bone thickness > 1.5 mm, treated with a low resorbtion rate collagen membrane alone, do not need more than 4 months for dental implant insertion.

Extraction Socket Preservation Using Porcine-Derived Collagen Membrane Alone or Associated with Porcine-Derived Bone. Clinical Results of Randomized Controlled Study

OBJECTIVES

The aim of present randomized controlled clinical trial was to clinically evaluate hard tissue changes after extraction socket preservation procedures compared to natural spontaneous healing.

MATERIAL AND METHODS

Thirty patients were enrolled in the present study and underwent single-tooth extraction in the premolar/molar areas. Ten sites were grafted with porcine-derived bone covered by collagen membrane, 10 covered by porcine-derived collagen membrane alone, and 10 underwent natural spontaneous healing. Vertical and horizontal bone changes after 3-month were evaluated at implant placement.

RESULTS

The vertical and horizontal bone changes at the extraction sockets treated with collagen membrane alone (vertical: -0.55 [SD 0.11] mm, and horizontal: -1.21 [SD 0.69] mm) and collagen membrane plus porcine-derived bone (vertical: -0.37 [SD 0.7] mm, and horizontal: -0.91 [SD 0.53] mm) were found significantly lower (P < 0.001), when compared to non-grafted sockets (vertical: -2.09 [SD 0.19] mm, and horizontal: -3.96 [SD 0.87] mm).In type 1 extraction sockets, in premolar sites, and in presence of vestibular bone thicknesses ≥ 1.5 mm, the use of collagen membrane alone revealed similar outcomes to those with additional graft material.

CONCLUSIONS

At the re-entry surgery, extraction sockets grafted with porcine-derived bone and covered by collagen membrane, and extraction sockets covered by porcine-derived collagen membrane alone, showed significantly lower vertical and horizontal bone changes, compared to extraction sockets sites underwent natural spontaneous healing. However, a complete prevention of remodelling is not achievable, irrespective of the technique used.

Evaluation of the osteoconductive potential of poly(propylene carbonate)/nano-hydroxyapatite composites mimicking the osteogenic niche for bone augmentation

Nano-hydroxyapatite (n-HA) reinforced poly(propylene carbonate) (PPC) composites were prepared for bone repair and reconstruction. The effects of reinforcement on the morphology, mechanical properties and biological performance of n-HA/PPC composites were investigated. The surface morphology and mechanical properties of the composites were characterized by scanning electron microscopy (SEM) and universal material testing machine. The analytical data showed that good incorporation and dispersion of n-HA crystals could be obtained in the PPC matrix at a 30:70 weight ratio. With the increase of n-HA content, the tensile strength increased and the fracture elongation rate decreased. In vitro cell culture revealed that the composite was favorable template for cell attachment and growth. In vivo implantation in femoral condyle defects of rabbits confirmed that the n-HA/PPC composite had good biocompatibility and gradual biodegradability, exhibiting good performance in guided bone regeneration. The results demonstrates that the incorporation of n-HA crystals into PPC matrix provides a practical way to produce biodegradable and cost-competitive composites mimicking the osteogenic niche for bone augmentation.