Emulsion-free chitosan-genipin microgels for growth plate cartilage regeneration

Application of chitosan with different molecular weights in cartilage tissue engineering

Cartilage tissue engineering involves the invention of novel implantable cartilage replacement materials to help heal cartilage injuries that do not heal themselves, aiming to overcome the shortcomings of current clinical cartilage treatments. Chitosan has been widely used in cartilage tissue engineering because of its similar structure to glycine aminoglycan, which is widely distributed in connective tissues. The molecular weight, as an important structural parameter of chitosan, affects not only the method of chitosan composite scaffold preparation but also the effect on cartilage tissue healing. Thus, this review identifies methods for the preparation of chitosan composite scaffolds with low, medium and high molecular weights, as well as a range of chitosan molecular weights appropriate for cartilage tissue repair, by summarizing the application of different molecular weights of chitosan in cartilage repair in recent years.

Injectable hydrogel loaded with bilayer microspheres to inhibit angiogenesis and promote cartilage regeneration for repairing growth plate injury

Introduction: The repair and regeneration of growth plate injuries using tissue engineering techniques remains a challenge due to large bone bridge formation and low chondrogenic efficiency. Methods: In this study, a bilayer drug-loaded microspheres was developed that contains the vascular endothelial growth factor (VEGF) inhibitor, Bevacizumab, on the outer layer and insulin-like growth factor-1 (IGF-1), a cartilage repair factor, on the inner layer. The microspheres were then combined with bone marrow mesenchymal stem cells (BMSCs) in the gelatin methacryloyl (GelMA) hydrogel to create a composite hydrogel with good injectability and biocompatibility. Results: The in vitro drug-release profile of bilayer microspheres showed a sequential release, with Bevacizumab released first followed by IGF-1. And this hydrogel simultaneously inhibited angiogenesis and promoted cartilage regeneration. Finally, in vivo studies indicated that the composite hydrogel reduced bone bridge formation and improved cartilage regeneration in the rabbit model of proximal tibial growth plate injury. Conclusion: This bilayer microsphere-based composite hydrogel with sequential controlled release of Bevacizumab and IGF-1 has promising potential for growth plate injury repair.

Magnetically Powered Chitosan Milliwheels for Rapid Translation, Barrier Function Rescue, and Delivery of Therapeutic Proteins to the Inflamed Gut Epithelium

Inflammatory bowel disease (IBD) is mediated by an overexpression of tumor necrosis factor-α (TNF) by mononuclear cells in the intestinal mucosa. Intravenous delivery of neutralizing anti-TNF antibodies can cause systemic immunosuppression, and up to one-third of people are non-responsive to treatment. Oral delivery of anti-TNF could reduce adverse effects; however, it is hampered by antibody degradation in the harsh gut environment during transit and poor bioavailability. To overcome these shortcomings, we demonstrate magnetically powered hydrogel particles that roll along mucosal surfaces, provide protection from degradation, and sustain the local release of anti-TNF. Iron oxide particles are embedded into a cross-linked chitosan hydrogel and sieved to produce 100-200 μm particles called milliwheels (m-wheels). Once loaded with anti-TNF, these m-wheels release 10 to 80% of their payload over 1 week at a rate that depends on the cross-linking density and pH. A rotating magnetic field induces a torque on the m-wheels that results in rolling velocities greater than 500 μm/s on glass and mucus-secreting cells. The permeability of the TNF-challenged gut epithelial cell monolayers was rescued in the presence of anti-TNF carrying m-wheels, which both neutralized the TNF and created an impermeable patch over leaky cell junctions. With the ability to translate over mucosal surfaces at high speed, provide sustained release directly to the inflamed epithelium, and provide barrier rescue, m-wheels demonstrate a potential strategy to deliver therapeutic proteins for the treatment of IBD.

Recent advances in cellulose microgels: Preparations and functionalized applications

Microgels are soft, deformable, permeable, and stimuli-responsive microscopic polymeric particles that are now emerging as prospective multifunctional soft materials for delivery systems, interface stabilization, cell cultures and tissue engineering. Cellulose microgels are emerging biopolymeric microgels with unique characteristics such as abound hydroxyl structure, admirable designability, multiscale pore network and excellent biocompatibility. This review summarizes the fabrication strategies for microgel, then highlights the fabrication routes for cellulose microgels, and finally elaborates cellulose microgels' bright application prospects with unique characteristics in the fields of controlled release, interface stabilization, coating, purification, nutrition/drug delivery, and bio-fabrication. The challenges to be addressed for further applications and considerable scope for development in future of cellulose microgels are also discussed.

Tissue engineering in growth plate cartilage regeneration: Mechanisms to therapeutic strategies

The repair of growth plate injuries is a highly complex process that involves precise spatiotemporal regulation of multiple cell types. While significant progress has been made in understanding the pathological mechanisms underlying growth plate injuries, effectively regulating this process to regenerate the injured growth plate cartilage remains a challenge. Tissue engineering technology has emerged as a promising therapeutic approach for achieving tissue regeneration through the use of functional biological materials, seed cells and biological factors, and it is now widely applied to the regeneration of bone and cartilage. However, due to the unique structure and function of growth plate cartilage, distinct strategies are required for effective regeneration. Thus, this review provides an overview of current research on the application of tissue engineering to promote growth plate regeneration. It aims to elucidates the underlying mechanisms by which tissue engineering promotes growth plate regeneration and to provide novel insights and therapeutic strategies for future research on the regeneration of growth plate.

Growing Pains: The Need for Engineered Platforms to Study Growth Plate Biology

Growth plates, or physis, are highly specialized cartilage tissues responsible for longitudinal bone growth in children and adolescents. Chondrocytes that reside in growth plates are organized into three distinct zones essential for proper function. Modeling key features of growth plates may provide an avenue to develop advanced tissue engineering strategies and perspectives for cartilage and bone regenerative medicine applications and a platform to study processes linked to disease progression. In this review, a brief introduction of the growth plates and their role in skeletal development is first provided. Injuries and diseases of the growth plates as well as physiological and pathological mechanisms associated with remodeling and disease progression are discussed. Growth plate biology, namely, its architecture and extracellular matrix organization, resident cell types, and growth factor signaling are then focused. Next, opportunities and challenges for developing 3D biomaterial models to study aspects of growth plate biology and disease in vitro are discussed. Finally, opportunities for increasingly sophisticated in vitro biomaterial models of the growth plate to study spatiotemporal aspects of growth plate remodeling, to investigate multicellular signaling underlying growth plate biology, and to develop platforms that address key roadblocks to in vivo musculoskeletal tissue engineering applications are described.

Polyelectrolyte Complex Hydrogels with Controlled Mechanics Affect Mesenchymal Stem Cell Differentiation Relevant to Growth Plate Injuries

The growth plate is a complex cartilage structure in long bones that mediates growth in children. When injured, the formation of a "bony bar" can occur which impedes normal growth and can cause angular deformities or growth arrest. Current treatments for growth plate injuries are limited and result in poor patient outcomes, necessitating research toward novel treatments that can prevent bony bar formation and stimulate cartilage regeneration. This study investigates alginate-chitosan polyelectrolyte complex (PEC) hydrogels as an injectable biomaterial system to prevent bony bar formation. Biomaterial properties including stiffness and degradation are quantified, and the effect that material properties have on mesenchymal stem cell (MSC) fate is quantified in vitro. Specifically, this study aims to elucidate the effectiveness of biomaterial-based control over the differentiation behavior of MSCs toward osteogenic or chondrogenic lineages using biochemical metabolite assays and quantitative real time PCR. Further, the PEC hydrogels are employed in a rat growth plate injury model to determine their effectiveness in preventing bony bar formation in vivo. Results indicate that hydrogel composition and material properties affect the differentiation tendency of MSCs in vitro, and the PEC hydrogels show promise as an injectable biomaterial for growth plate injuries.

A new method for modeling rabbit growth plate injury for the study of tissue engineering scaffolds

Establishing a suitable animal model of growth plate injury is necessary to evaluate the effect of tissue engineering scaffolds on repairing the injured growth plate. However, the currently used animal models have limitations. Therefore in this study, we reported and evaluated a new modeling method termed the longitudinal disruption method, which is to make a longitudinal defect in the region of growth plate. In order to compare this new method with the traditional transverse disruption method, we constructed the models by both methods, respectively. To observe whether bone bridges were formed, histological sections were analyzed by HE and Masson staining at three weeks after modeling. The HE and Masson staining results showed the formation of bone bridges in both groups, implying that the two methods successfully injured the growth plate. However, it was unclear whether the exact injury to growth plate caused by both methods was consistent. Therefore, in order to evaluate the accuracy and precision of modeling method, the X-ray and micro-CT were performed immediately after modeling. The percentages of accurate defect position in the longitudinal and transverse modeling groups were 88.89% and 55.56%, respectively. The micro-CT results revealed irregularly shaped defect cross sections in the transverse modeling group, whereas the defects in the longitudinal modeling group had regular shapes. The mean defect areas were 10.06 ± 0.86 and 12.30 ± 2.13 mm² in the longitudinal and transverse modeling groups, respectively, while the difference between the actual area and the expected area were -1.94 ± 0.86 mm² and -7.70 ± 2.13 mm², respectively, showing the high precision of this new method. Altogether, we successfully demonstrated a new method for establishing a rabbit model of growth plate injury,which provides a simple and rapid modeling process, good modeling effect, high modeling accuracy, and convenient scaffold implantation. The new method provides an effective animal model for tissue engineering research on the repair and regeneration of injured growth plate.

3D bioassembly of cell-instructive chondrogenic and osteogenic hydrogel microspheres containing allogeneic stem cells for hybrid biofabrication of osteochondral constructs

Recently developed modular bioassembly techniques hold tremendous potential in tissue engineering and regenerative medicine, due to their ability to recreate the complex microarchitecture of native tissue. Here, we developed a novel approach to fabricate hybrid tissue-engineered constructs adopting high-throughput microfluidic and 3D bioassembly strategies. Osteochondral tissue fabrication was adopted as an example in this study, because of the challenges in fabricating load bearing osteochondral tissue constructs with phenotypically distinct zonal architecture. By developing cell-instructive chondrogenic and osteogenic bioink microsphere modules in high-throughput, together with precise manipulation of the 3D bioassembly process, we successfully fabricated hybrid engineered osteochondral tissue in vitro with integrated but distinct cartilage and bone layers. Furthermore, by encapsulating allogeneic umbilical cord blood-derived mesenchymal stromal cells (UCB-MSCs), and demonstrating chondrogenic and osteogenic differentiation, the hybrid biofabrication of hydrogel microspheres in this 3D bioassembly model offers potential for an off-the-shelf, single-surgery strategy for osteochondral tissue repair.

Cell-laden injectable microgels: Current status and future prospects for cartilage regeneration

Injectable hydrogels have been employed extensively as versatile materials for cartilage regeneration due to their excellent biocompatibility, tunable structure, and ability to accommodate bioactive factors, as well as their ability to be locally delivered via minimally invasive injection to fill irregular defects. More recently, in vitro and in vivo studies have revealed that processing these materials to produce cell-laden microgels can enhance cell-cell and cell-matrix interactions and boost nutrient and metabolite exchange. Moreover, these studies have demonstrated gene expression profiles and matrix regeneration that are superior compared to conventional injectable bulk hydrogels. As cell-laden microgels and their application in cartilage repair are moving closer to clinical translation, this review aims to present an overview of the recent developments in this field. Here we focus on the currently used biomaterials and crosslinking strategies, the innovative fabrication techniques being used for the production of microgels, the cell sources used, the signals used for induction of chondrogenic differentiation and the resultant biological responses, and the ability to create three-dimensional, functional cartilage tissues. In addition, this review also covers the current clinical approaches for repairing cartilage as well as specific challenges faced when attempting the regeneration of damaged cartilage tissue. New findings related to the macroporous nature of the structures formed by the assembled microgel building blocks and the novel use of microgels in 3D printing for cartilage tissue engineering are also highlighted. Finally, we outline the challenges and future opportunities for employing cell-laden microgels in clinical applications.