Biological interactions: causes for risks and failures of biomaterials and devices

Direct correlation of electrochemical behaviors with anti-thrombogenicity of semiconducting titanium oxide films

Biomaterials-associated thrombosis is dependent critically upon electrochemical response of fibrinogen on material surface. The relationship between the response and anti-thrombogenicity of biomaterials is not well-established. Titanium oxide appears to have good anti-thrombogenicity and little is known about its underlying essential chemistry. We correlate their anti-thrombogenicity directly to electrochemical behaviors in fibrinogen containing buffer solution. High degree of inherent n-type doping was noted to contribute the impedance preventing charge transfer from fibrinogen into film (namely its activation) and consequently reduced degree of anti-thrombogenicity. The impedance was the result of high donor carrier density as well as negative flat band potential.

Medical Device Regulations and Testing for Toxicologic Pathologists

Awareness of the regulatory environment is fundamental to understanding the biological assessment of biomaterials and medical devices. Medical devices are a diverse and heterogenous group of medical products and technologies defined by the lack of chemical action or requirement for metabolism. Regional activity and the Global Harmonization Task Force are now working on harmonizing the categorization and testing of medical devices. The International Organization for Standardization (ISO) has published 19 standards for biological evaluation. ISO 10993 standards are generally accepted outright or as an alternative to most national regulatory directives or acts, although Japan and the United States require more stringency in some tests. Type of materials, intended use, and risk are the basis for drafting testing programs for biomaterials and medical devices. With growth of the medical device industry and advent of new biomaterials and technologies, the need for toxicologic pathologists in safety (biocompatibility) and efficacy (conditions of use) evaluation of moderate- to high-risk devices is expanding. Preclinical evaluation of biomaterials and medical devices increasingly requires a basic understanding of materials science and bioengineering to facilitate interpretation of complex interface reactions between biomaterials, cellular and secretory factors, and vascular and tissue responses that modulate success or failure of medical devices.

Cytotoxic reaction and TNF-alpha response of macrophages to polyurethane particles

Their unique mechanical and biological properties make polyurethanes (PUs) ideal materials for many implantable devices. However, uncertain long-term biostability in the human physiological environment limits their extensive clinical applications. Chronic inflammatory response associated with macrophage activation has been suggested as a prime factor; although the mechanism of macrophage activation in response to biomaterial surfaces and debris is still unknown. The overall objective of this work was to study the response of macrophages to PU materials in vitro by measuring cell viability and activity. The studies were carried out using phagocytozable-size PU particles from three types of commercially-available PUs: Pellethane 2363 80ABA (PL); Tecothane TT2065 (TC65); and Tecothane TT2085 (TC85). These polymers posess the same generic composition but differ in the length of hard and soft segments, as revealed by the FTIR and NMR studies. The results showed that PU particles affected both viability and activity of J774 macrophages. The percentage of mortality ranged from 1 to 15% with 10-100 microg ml(-1) of particles after 24 and 48 h incubation. These three types of particles induced different mortality on the macrophages. Specifically, the mortality with PL particles was 1-4% (p > 0.05), while the mortality with TC85 particles was 2-10% (p < 0.05) and 4-15% with TC65 (p < 0.05). Conversely, these particles also affected cell proliferation. Cell numbers increased by 132 and 167% after 24 and 48 h incubation, respectively, without particles, whereas the cell numbers increased only 46 and 78% with TC65, 66 and 105% with TC85, and 67 and 110% with PL in the presence of 100 microg ml(-1) of particles for the respective incubation times. PU particles also increased TNF-alpha release from macrophage. After having been incubated for 24 h with 100 microg ml(-1) particles of TC65, TC85, and PL, macrophages release TNF-alpha 7.4, 5.2, and 4.1 times more than the control. In conclusion, PU particles had cytotoxic effects on J774 macrophage at high concentrations. The order of macrophage response for three types of particles was TC65 > TC85 > PL. PU particles' effect on macrophage viability and activity depends on the concentration of particles and their chemical composition, especially on the ratio of hard to soft segments.