A Review of Dental Cements

Analysis of subgingival microbiota and IL-1β, TNF-α and CX3CL1 levels in gingival crevicular fluid of fixed dental prostheses

Prosthetic biomaterials can affect the composition of the subgingival microbiota and consequently the production of proinflammatory cytokines, causing damage to the periodontium. A total of 40 patients were divided into two groups: 20 with monolithic zirconia (MZ) prostheses and 20 with porcelain fused to metal (PFM) with nickel-chromium (Ni-Cr) alloy prostheses. Subgingival plaque and gingival crevicular fluid samples were taken. The Checkerboard technique for DNA-DNA hybridization and the enzyme-linked immunosorbent assay technique were performed. Teeth with MZ presented a lower percentage of bleeding on probing and tooth mobility compared to teeth with PFM with Ni-Cr alloy. Prosthodontic teeth harbored higher total levels of the 18 bacterial species than non-prosthodontic teeth. There was a higher prevalence of S. gordonii and V. parvula species in PFM with Ni-Cr alloy compared to MZ. There was an increase in IL-1β, TNF-α and CX3CL1 levels in PFM with Ni-Cr alloy compared to MZ. MZ is a candidate biomaterial with fewer negative effects on the periodontium, allowing for longer prostheses longevity in the mouth.

Color stability of dual-cured and light-cured resin cements: A systematic review and meta-analysis of in vitro studies

PURPOSE

This systematic review and meta-analysis aimed to evaluate the difference in the color stability of light-cured and dual-cured resin cements.

MATERIALS AND METHODS

Two separate reviewers used the PubMed, Scopus, Web of Science, Embase, and Scielo databases to execute the systematic review. For the analysis, studies that evaluated the color stability of dual-cured and light-cured resin cements over time were used. The random effects model was used in the meta-analysis. Analyses of subgroups were carried out based on the aging technique. The methodological quality of each in vitro study was evaluated in accordance with the parameters of a prior systematic review.

RESULTS

From all databases, a total of 2223 articles were retrieved. Following the screening of titles and abstracts, 44 studies were selected for full text review, and a total of 27 articles were used for the qualitative analysis. Finally, 23 articles remained for the qualitative analysis. The majority of studies were labeled as having a medium risk of bias. The global analysis showed that the dual-cure resin cements had considerably greater differences in the color change (p = 0.006). A high heterogeneity index (86%) was found in the analysis.

CONCLUSIONS

The best available in vitro evidence suggests that dual-polymerizing cement has higher color variation than light-polymerized materials. To reduce the likelihood of color change after the luting of thin ceramic restorations, clinicians should employ light-polymerizable resin cements.

Effect of pretreatment of root dentin surface with cold atmospheric plasma on improving the bond strength of fiber post and resin cement: In vitro study

INTRODUCTION

Achieving stable adhesion between fiber post and interradicular dentin is a challenging process in the restoration of endodontically treated teeth. This study was conducted to investigate the effect of surface pretreatment with cold atmospheric plasma (CAP) on improving the bond strength between them.

MATERIALS AND METHODS

Forty-eight single-canal mandibular premolars were cut 1 mm above the cementoenamel junction to keep the root length of 14 mm or more. After endodontic treatment and preparation of the post space, the teeth were divided into four groups regarding the pretreatment of dentin surfaces, including normal saline, ethylenediaminetetraacetic acid (EDTA), CAP, and CAP + EDTA groups. The data were analyzed using paired and independent t-test and one-way analysis of variance and the significance level was set at p < .05.

RESULTS

The bond strength was significantly higher in the coronal third than in the apical third in all the groups. Moreover, the bond strength was significantly higher in the CAP + EDTA-treated group. The bond strength increased significantly in the CAP group compared to the normal saline group. In addition, the bond strength increased significantly in the CAP or EDTA groups compared to the control group. The lowest bond strength belonged to the control group (normal saline).

CONCLUSION

The surface pretreatment with CAP (alone or in combination with EDTA) played a significant role in improving the bond strength of fiber post and root canal dentin.

Dental Luting Cements: An Updated Comprehensive Review

The cementation of indirect restoration is one of the most important steps in prosthetic and restorative dentistry. Cementation aims to bond the prosthetic restoration to the prepared enamel or enamel and dentine. Successful cementation protocols prevent biofilm formation at the margin between tooth and restoration and minimize mechanical and biological complications. With the advancements in dental cements, they have been modified to be versatile in terms of handling, curing, and bond strengths. This review presents updates on dental cements, focusing on the composition, properties, advantages, limitations, and indications of the various cements available. Currently, dental restorations are made from various biomaterials, and depending on each clinical case, an appropriate luting material will be selected. There is no luting material that can be universally used. Therefore, it is important to distinguish the physical, mechanical, and biological properties of luting materials in order to identify the best options for each case. Nowadays, the most commonly used dental cements are glass-ionomer and resin cement. The type, shade, thickness of resin cement and the shade of the ceramic, all together, have a tangible influence on the final restoration color. Surface treatments of the restoration increase the microtensile bond strength. Hence, the proper surface treatment protocol of both the substrate and restoration surfaces is needed before cementation. Additionally, the manufacturer's instructions for the thin cement-layer thickness are important for the long-term success of the restoration.

Update on Dental Luting Materials

A dental luting material aids in the retention and stability of indirect restorations on the prepared tooth structure. In dentistry, clinicians are using a wide range of luting materials for the cementation of indirect restorations. Zinc oxide eugenol and non-eugenol cements, zinc phosphate cement, zinc polycarboxylate cement, glass ionomer cement and resin cements are common dental cements used in dentistry. Each luting material or cement possesses unique properties and clinical implications. An ideal luting cement should be biocompatible, insoluble, resistant to thermal and chemical assaults, antibacterial, aesthetic, simple and easy to use. It should have high strength properties under tension, shear and compression to resist stress at the restoration-tooth interface, as well as adequate working and setting times. So far, no luting material possesses all of these properties of an ideal cement. Scientists have been modifying the conventional luting cements to improve the material's clinical performance and developing novel materials for clinical use. To achieve the best clinical outcome, clinicians should update their knowledge and gain a good understanding of the luting materials so that they can make a wise clinical decision on the material selection and obtain an insight into the development of luting cements. Therefore, the objective of this study is to provide a discussion on the physical, chemical, adhesive and aesthetic properties of common luting materials. The clinical indications of these luting materials are suggested based on their properties. In addition, overviews of the modification of the conventional luting materials and the newly developed luting materials are provided.

Novel antibacterial low-shrinkage-stress resin-based cement

OBJECTIVE

A low-shrinkage-stress resin-based cement with antibacterial properties could be beneficial to create a cement with lower stress at the tooth-restoration interface, which could help to enhance the longevity of the fixed dental restoration by reducing microleakage and recurrent caries. To date, there has been no report on the development of a low-shrinkage-stress and bio-interactive cement. Therefore, the objectives of this study were to develop a novel low-shrinkage-stress resin-based cement containing dimethylaminohexadecyl methacrylate (DMAHDM) and investigate the mechanical and antibacterial properties for the first time.

METHODS

The monomers urethane dimethacrylate (UDMA) and triethylene glycol divinylbenzyl ether (TEG-DVBE) were combined and denoted as UV resin. Three cements were fabricated: (1) UV+ 0%DMAHDM (experimental control); (2) UV+ 3%DMAHDM, (3) UV+ %5DMAHDM. RelyX Ultimate cement was used as commercial control. Mechanical properties and Streptococcus mutans (S. mutans) biofilms growth on cement were evaluated.

RESULTS

The novel bio-interactive cement demonstrated excellent antibacterial and mechanical properties. Compared to commercial and experimental controls, adding DMAHDM into the UV cement significantly reduced colony forming unit (CFU) counts by approximately 7 orders of magnitude, metabolic activities from 0.29 ± 0.03 A₅₄₀/cm² to 0.01 ± 0.01 A₅₄₀/cm², and lactic acid production from 22.3 ± 0.74 mmol/L to 1.2 ± 0.27 mmol/L (n = 6) (p < 0.05). The low-shrinkage-stress cement demonstrated a high degree of conversion of around 70 %, while reducing the shrinkage stress by approximately 60%, compared to a commercial control (p < 0.05).

CONCLUSIONS

The new antibacterial low-shrinkage-stress resin-based cement provides strong antibacterial action and maintains excellent mechanical properties with reduced polymerization shrinkage stress.

CLINICAL SIGNIFICANCE

A low-shrinkage-stress resin-based cement containing DMAHDM was developed with potent antibacterial effects and promising mechanical properties. This cement may potentially enhance the longevity of fixed dental restoration such as a dental crown, inlay, onlay, and veneers through its excellent mechanical properties, low shrinkage stress, and strong antibacterial properties.

Novel composite cement containing the anti-microbial compound CPC-Montmorillonite

OBJECTIVES

The aim of this study was to evaluate the mechanical properties, bonding performance and anti-microbial activity of a novel composite cement containing cetylpyridinium chloride (CPC) modified montmorillonite ('CPC-Mont'), and using these parameters to determine the optimal particle size and concentration of CPC-Mont the composite cement can be loaded with.

METHODS

CPC-Mont particles with a median diameter of 30 and 7 µm were prepared and added to a composite cement at a concentration of 2, 3, 4, 5 and 7.5 wt%. Mechanical properties and bonding performance of the experimental composite cements were evaluated by 3-point bending and micro-tensile bond-strength testing. The amount of CPC released from the cement disks was quantified using a UV-vis recording spectrophotometer. The anti-biofilm activity was studied using scanning electron microscopy (SEM).

RESULTS

Adding 30-μm CPC-Mont decreased the mechanical properties and bonding performance of the composite cement, while no reduction was observed for the 7-μm CPC-Mont loaded cement formulation. Although CPC release substantially decreased during the 7-day period assessed, 5- and 7.5-wt% CPC-Mont loaded composite cement inhibited biofilm formation for 30 days.

SIGNIFICANCE

Loading composite cement with CPC-Mont with a median diameter of 7 µm at concentrations of 5-7.5 wt% was effective in achieving continuous anti-biofilm activity, while maintaining mechanical strength and bonding performance.

The Benefits of Smart Nanoparticles in Dental Applications

Dentistry, as a branch of medicine, has undergone continuous evolution over time. The scientific world has focused its attention on the development of new methods and materials with improved properties that meet the needs of patients. For this purpose, the replacement of so-called "passive" dental materials that do not interact with the oral environment with "smart/intelligent" materials that have the capability to change their shape, color, or size in response to an externally stimulus, such as the temperature, pH, light, moisture, stress, electric or magnetic fields, and chemical compounds, has received much attention in recent years. A strong trend in dental applications is to apply nanotechnology and smart nanomaterials such as nanoclays, nanofibers, nanocomposites, nanobubbles, nanocapsules, solid-lipid nanoparticles, nanospheres, metallic nanoparticles, nanotubes, and nanocrystals. Among the nanomaterials, the smart nanoparticles present several advantages compared to other materials, creating the possibility to use them in various dental applications, including preventive dentistry, endodontics, restoration, and periodontal diseases. This review is focused on the recent developments and dental applications (drug delivery systems and restoration materials) of smart nanoparticles.