Thermal Degradation and Carbonization Mechanism of Fe-Based Metal-Organic Frameworks onto Flame-Retardant Polyethylene Terephthalate

Currently, the metal-organic framework (MOF) is a promising candidate for flame-retardant polymers. In this study, a Fe-based MOF, MIL-88B(Fe), was introduced to polyethylene terephthalate (PET) and 3-hydroxyphenylphosphinyl-propanoic acid copolymer (P-PET) to reduce the fire hazard involved in using PET. The limiting oxygen indexes (LOIs) of MIL-PET and MIL-P-PET improved by 27% and 30%, respectively. The UL-94 level achieved for MIL-P-PET was V-0 rating. The thermal degradation and carbonization mechanisms of MIL-PET and MIL-P-PET were systematically investigated through thermogravimetric analysis coupled with a Fourier transform infrared spectroscopy (TG-IR), pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS), x-ray photoelectron spectroscopy (XPS), and Raman spectrum combined with quantum chemical molecular dynamics simulation. With the addition of MIL-88B(Fe), high graphitization and a hard flammability char residual were generated. Compared with neat PET, the ferric ions efficiently catalyzed the homolytic cleavage and dehydrogenation of PET to produce a large amount of CO₂ and terephthalic acid for MIL-PET in gas phase. Rough and hierarchical char residual with ferric oxide was also generated when temperatures exceeded 600 °C. However, the carbonization process was inhibited due to the coordinated complex between phosphorus and ferric ions in MIL-P-PET, invaliding the decarboxylation and generating more benzoic acid and its precursor, which led to heavy smoke.

Fire retardant polyethylene terephthalate containing 4,4′-(hexafluoroisopropylidene)diphenol-substituted cyclotriphosphazene microspheres

Polyphosphazene derivatives are gaining popularity due to their eco-friendly character and high content of flame-retardant components. Herein, a polyphosphazene derivative (PZAF) microsphere was successfully synthesized utilizing an in-situ template approach, which was then employed as an additive flame retardant in polyethylene terephthalate (PET) to improve the fire safety. Thermogravimetric analysis revealed that PZAF promoted the pyrolysis of PET in advance to generate a stable char layer that protects the matrix from heat, consequently increasing char residues. With addition of 10 wt% PZAF, the PET nanocomposites obtained a V-0 grade in vertical combustion test and its LOI value increased from 24.2 vol% to 32.1 vol%. Moreover, the peak heat release and carbon monoxide production decreased by 46.6% and 50.6%, respectively. This was because the phosphonic acid fragments and pyridine ring compounds produced by the PZAF pyrolysis encouraged the development of a robust char layer. Meanwhile, the •PO radicals generated by the pyrolysis of PZAF could capture free radicals in the gas phase, ultimately ending the chain reaction of combustion. Also, mechanical properties of the PET nanocomposites were noticeably enhanced by the addition of 3 or 5 wt% PZAF.

Synthesis of Layered Double Hydroxides with Phosphate Tailings and Its Effect on Flame Retardancy of Epoxy Resin

In this work, phosphate tailings (PTs) were used as raw materials for the preparation of Ca-Mg-Al layered double hydroxides (LDHs-1) and Ca-Mg-Al-Fe layered double hydroxides (LDHs-2) by co-precipitation method. The as-prepared samples were characterized by FT-IR, SEM, XRD, and XPS and applied as a flame retardant to improve the fire safety of epoxy resin (EP). The results showed that both LDHs-1 and LDHs-2 exhibited layered structure and high crystallinity. Compared with neat EP, the value of limiting oxygen index (LOI) increased from 25.8 to 29.3 and 29.9 with 8 wt% content of LDHs-1 and LDHs-2, respectively. The flame retardant properties of the composite material were characterized by cone calorimeter (CC), and the results showed that the peak value of the smoke production rate (SPR) decreased more than 45% and 74%, total smoke production (TSP) reduced nearly 64% and 85% with the addition of LDHs-1 and LDHs-2. Meanwhile, the value of the total heat release (THR) reduced more than 28% and 63%. The conversion from LDHs to layered double oxide (LDO) might be conducive to the fire safety of EP. Moreover, the transformation of Fe-OH to Fe-O could promote the early cross-linking of polymer. In summary, LDHs-2 could significantly improve the carbonization process of EP and suppress the smoke released during the combustion process.

Synthesis of novel multi-hydroxyl N-halamine precursors based on barbituric acid and their applications in antibacterial poly(ethylene terephthalate) (PET) materials

Two novel multi-hydroxyl N-halamine precursors were successfully synthesized in a green and facile way via Knoevenagel condensation reaction between barbituric acid and an aldehyde (citral or cinnamaldehyde), followed by a hydroxylation reaction with hydrogen peroxide. 1H-NMR and FT-IR spectral analyses confirmed their formation. Through the melt-blending process, the multi-hydroxyl derivatives of barbituric acid were introduced via transesterification into poly(ethylene terephthalate) (PET) at 265 °C in a rheometer. The crystallization behaviors of the modified PET samples were investigated using X-ray diffraction (XRD), differential scanning calorimetry (DSC), and polarized optical microscopy (POM) analyses. The results showed that the crystallization temperature and crystallization rate of PET were significantly improved upon the introduction of the precursor. Meanwhile, the relative crystallinity of the modified PET samples increased with an increase in the dosage of the N-halamine precursor. After the treatment with sodium hypochlorite solution, the PET surfaces modified with N-halamine derivatives would impart powerful antibacterial properties and achieve 100% killing of Staphylococcus aureus (ATCC 6538) and Escherichia coli (CMCC44103) cells within 30 min. Therefore, the multi-hydroxyl N-halamine precursors exhibit great potential as bifunctional additives (nucleating and antibacterial agents) in the manufacturing of functional PET materials.

3D Printing and Solvent Dissolution Recycling of Polylactide-Lunar Regolith Composites by Material Extrusion Approach

The in situ resource utilization of lunar regolith is of great significance for the development of planetary materials science and space manufacturing. The material extrusion deposition approach provides an advanced method for fabricating polylactide/lunar regolith simulant (PLA/CLRS-1) components. This work aims to fabricate 3D printed PLA-lunar regolith simulant (5 and 10 wt.%) components using the material extrusion 3D printing approach, and realize their solvent dissolution recycling process. The influence of the lunar regolith simulant on the mechanical and thermal properties of the 3D printed PLA/CLRS-1 composites is systematically studied. The microstructure of 3D printed PLA/CLRS-1 parts was investigated by scanning electron microscopy (SEM) and X-ray computed tomography (XCT) analysis. The results showed that the lunar regolith simulant can be fabricated and combined with a PLA matrix utilizing a 3D printing process, only slightly influencing the mechanical performance of printed specimens. Moreover, the crystallization process of PLA is obviously accelerated by the addition of CLRS-1 because of heterogeneous nucleation. Additionally, by using gel permeation chromatography (GPC) and attenuated total reflectance Fourier transform infrared (ATR-FTIR) characterization, it is found that the 3D printing and recycling processes have a negligible influence on the chemical structure and molecular weight of the PLA/CLRS-1 composites. As a breakthrough, we successfully utilize the lunar regolith simulant to print components with satisfactory mechanical properties and confirm the feasibility of recycling and reusing 3D printed PLA/CLRS-1 components via the solvent dissolution recycling approach.