Can empirical mode decomposition improve heartbeat detection in fetal phonocardiography signals?

BACKGROUND AND OBJECTIVE

A fetal phonocardiography signal can be hard to interpret and classify due to various sources of additive noise in the womb, spanning from fetal movement to maternal heart sounds. Nevertheless, the non-invasive nature of the method makes it potentially suitable for long-term monitoring of fetal health, especially since it can be implemented on ubiquitous devices such as smartphones. We have employed empirical mode decomposition for the extraction of intrinsic mode functions that would enable the utilization of additional characteristics from the signal.

METHODS

Fetal heart recordings from 7 pregnant women in the 3rd trimester or pregnancy were taken in parallel with a measurement microphone and a portable Doppler device. Signal peaks positions from the Doppler were taken as the locations of S1 heart sounds and subsequently used as classification labels for the microphone signal. After employing a moving window approach for segmentation, more than 7600 observations were stored in the final dataset. The 135 extracted features consisted of typical audio temporal and spectral characteristics, each taken from separate sets of audio signals and intrinsic mode functions. We have used a number of metrics and methods to validate the usability of features, including univariate analysis of feature ranking and importance. Furthermore, we have used machine learning to train a number of classifiers to validate the usability of features based on intrinsic mode functions, taking prediction accuracy as the comparison metric.

RESULTS

Features extracted from intrinsic mode functions combined with audio features significantly improve accuracy in comparison to using only audio features. The improvements of detection accuracy obtained with a selected set of combined features spanned from 3.8% to even 10.3% based on the employed classifier.

CONCLUSIONS

We have utilized empirical mode decomposition as a method of extracting features relevant for fetal heartbeat classification. The results show consistent improvements in detection accuracy when these characteristics are added to a set of conventional audio features. This implies substantial benefits of applying empirical mode decomposition and lays the groundwork for future research on fetal heartbeat detection.

Heart sound recognition technology based on convolutional neural network

The mortality rate of heart disease continues to rise each year: developing mechanisms to reduce mortality from heart disease is a top concern in today's society. Heart sound auscultation is a crucial skill used to detect and diagnose heart disease. In this study, we propose a heart sound signal classification algorithm based on a convolutional neural network. The algorithm is based on heart sound data collected in the clinic and from medical books. The heart sound signals were first preprocessed into a grayscale image of 5 seconds. The training samples were then used to train and optimize the convolutional neural network; obtaining a training result with an accuracy of 95.17% and a loss value of 0.23. Finally, the convolutional neural network was used to test the test set samples. The results showed an accuracy of 94.80%, sensitivity of 94.29%, specificity of 95.54%, precision of 93.44%, F1_score of 93.84%, and an AUC of 0.943. Compared with other algorithms, the accuracy and sensitivity of the algorithms were improved. This shows that the method used in this study can effectively classify heart sound signals and could prove useful in assisting heart sound auscultation.

Detection and localization of S1 and S2 heart sounds by 3rd order normalized average Shannon energy envelope algorithm

Adults born after 1970s are more prone to cardiovascular diseases. Death rate percentage is quite high due to heart related diseases. Therefore, there is necessity to enquire the problem or detection of heart diseases earlier for their proper treatment. As, Valvular heart disease, that is, stenosis and regurgitation of heart valve, are also a major cause of heart failure; which can be diagnosed at early-stage by detection and analysis of heart sound signal, that is, HS signal. In this proposed work, an attempt has been made to detect and localize the major heart sounds, that is, S₁ and S₂. The work in this article consists of three parts. Firstly, self-acquisition of Phonocardiogram (PCG) and Electrocardiogram (ECG) signal through a self-assembled, data-acquisition set-up. The Phonocardiogram (PCG) signal is acquired from all the four auscultation areas, that is, Aortic, Pulmonic, Tricuspid and Mitral on human chest, using electronic stethoscope. Secondly, the major heart sounds, that is, S₁ and S₂are detected using 3rd Order Normalized Average Shannon energy Envelope (3rd Order NASE) Algorithm. Further, an auto-thresholding has been used to localize time gates of S₁ and S₂ and that of R-peaks of simultaneously recorded ECG signal. In third part; the successful detection rate of S₁ and S₂, from self-acquired PCG signals is computed and compared. A total of 280 samples from same subjects as well as from different subjects (of age group 15-30 years) have been taken in which 70 samples are taken from each auscultation area of human chest. Moreover, simultaneous recording of ECG has also been performed. It was analyzed and observed that detection and localization of S₁ and S₂ found 74% successful for the self-acquired heart sound signal, if the heart sound data is recorded from pulmonic position of Human chest. The success rate could be much higher, if standard data base of heart sound signal would be used for the same analysis method. The, remaining three auscultations areas, that is, Aortic, Tricuspid, and Mitral have smaller success rate of detection of S₁ and S₂ from self-acquired PCG signals. So, this work justifies that the Pulmonic position of heart is most suitable auscultation area for acquiring PCG signal for detection and localization of S₁ and S₂ much accurately and for analysis purpose.

A proposed algorithm for analysing heart sounds and calculating their time intervals

Heart sounds play a crucial role in the clinical assessment of patients. Stethoscopes are used for detecting heart sounds and diagnosing potential abnormal conditions. However, several parameters of the cardiac sounds cannot be extracted by traditional stethoscopes. This paper presents a proposed algorithm based on peaks detection. Besides its ability of filtering the heart sounds signals, the time intervals of these sounds in addition to the heart rate were calculated by the proposed algorithm in an efficient way. Signals of the heart sounds from two sources were used to evaluate the efficiency of the algorithm. The first source was the data recorded from 14 participants, whereas the second source was the free data set sponsored by PASCAL. The algorithm showed different performance accuracy for detecting the main heart sounds based on the source of the data used in the study. The accuracy was 93.6% when using the data recorded from the first source, whereas it was 76.194% for the data of the second source.

Noise Removal of Tracheal Sound Recorded During CPET to Determine Respiratory Rate

This study aimed to extract respiratory signal from tracheal sound recordings during cardio-pulmonary exercise test (CPET), which is the state-of-the-art diagnosis of cardiovascular and respiratory diseases. However, the availability of CPET is limited due to its expense. Physiological signal analysis is a convenient alternative to measure clinical parameters. We collected data from 30 healthy adults and applied wavelet transform thresholding (WTT), empirical mode decomposition (EMD), and Synchrosqueezing transform filtering (SST) to de-noise the raw data. Signal to noise ratio (SNR) was calculated as a quantitative measure of signal quality. We observed that SST yielded the highest SNR and introduced lowest signal distortion by visual-auditory inspection. Respiratory rate was then determined using the signal extracted by SST. Discrepancy of respiratory rate determined from the signal and the gold standard CPET was within 1.2 breaths per minute. In conclusion, SST effectively removed noises in tracheal sound recorded during CPET and provided analyzable respiratory signal for clinical parameter determination.