Analysis of the stent expansion in a stenosed artery using finite element method: application to stent versus stent study

TORSIONAL BEHAVIOR OF STENTS: THE ROLE OF LINKER AND STENT TAPERING INVESTIGATED WITH NUMERICAL SIMULATION

The torsional performance is a major mechanical property of stent. A stent with good torsional performance is easy to deform along blood vessels without damaging the vascular wall to avoid in-stent restenosis (ISR). Therefore, this study aimed to study the effect of stent parameters on torsional performance. The effect of stent parameters on torsional performance was studied via finite element method (FEM). The twist metric (TM) and stress distribution of various stents were compared. The TM values of stents with I-, S-, M-, C-, and V-shaped linkers were 0.0190, 0.0191, 0.0184, 0.0141, and 0.0201[Formula: see text][Formula: see text], respectively. In addition, the TM value of the stent increased by 35.85 times when the number of linkers was increased from 2 to 8 and the stent was twisted at the same angular displacement in clockwise direction. The TM value of the stent with 1.13∘ tapering was 0.010 [Formula: see text], which was lower by 47.64% compared with that of cylindrical stent. Compared with the shape of the linker, the number of linkers had a more remarkable effect on torsional performance. Torsional performance was observably enhanced with the decrease in the number of linkers. Among the five stents with different linker shapes, the torsional performance of the stent with C-shaped linker was the best. Besides, the torsional performance of the tapered stent was better than that of the cylindrical stent. Moreover, the torsional performance increased by increasing the stent tapering. This work might provide insights into better stent design and clinical decisions.

Virtual Reality-Assisted Percutaneous Transluminal Angioplasty for Interventional Treatment of Lower-Extremity Arteriosclerosis Obliterans

This study was to evaluate the biomechanical characteristics of the vascular wall during virtual reality- (VR-) assisted percutaneous transluminal angioplasty (PTA) and its effect on the treatment of lower-extremity arteriosclerosis obliterans (LEAO). In this study, a three-dimensional (3D) model and a finite-element model of arteries were constructed first, and various fluid mechanics were analyzed. Then, the virtual expansion simulation (VES) of individualized PTA was performed based on the ABAQUS/Explicit module to analyze the interaction between the balloon and the blood vessel at different times and the changes in the vascular shape and structural stress distribution. Finally, an LEAO animal model was constructed. Based on conventional PTA (PTA group) and VR-assisted PTA (VR-PTA) treatment, the morphological changes of vascular lumen of the two animal models were evaluated. The results showed that the normal, stenotic blood vessels and blood models were successfully constructed; the pressure of the stenotic blood vessel at the stenosis decreased obviously and the shear stress of blood vessel wall increased compared with that of the normal blood vessels, and there may be a blood reflux area in the poststenosis stage. The simulation results of the VES showed that the maximum principal stress value at 3 mm of the marginal vessel was much lower than that at 5 mm (about 10% lower), so the maximum principal stress change within 2 mm of the balloon-expanded vessel was the most obvious. The treatment results of the animal model showed that the VR-PTA group showed an obvious increase in the diameter of the vascular lumen, a decrease in the intima and media area, and a decrease in the thickness of the vessel wall in contrast to the PTA group (P < 0.05), which had an important effect on the reconstruction and expansion of the vascular lumen. The VR-PTA treatment on LEAO was realized in this study, which provided critical reference for the follow-up application of VR technology in the evaluation of surgical plan and research on biomechanical mechanisms of restenosis after PTA.

DESIGN AND ANALYSIS OF NEW STENT PATTERNS FOR ENHANCED PERFORMANCE

Deploying a stent to restore blood flow in the coronary artery is very complicated, as its internal diameter is smaller than 3[Formula: see text]mm. It has already been proven that mechanical stresses induced on stent and artery during deployment make the placement of stent very difficult, besides the development of complications due to artery damage. Various stent designs have already been developed, especially in the metallic category. Still, there are possibilities for developing new stent designs and patterns to overcome the complexities of the existing models. Also, the technology of metallic stents can be carried forward towards the development of bioresorbable polymeric stents. In this work, three new stent cell designs (curvature, diamond, and oval) have been proposed to obtain better performance and life. The finite element method is utilized to explore the mechanical behavior of stent expansion and determine the biomechanical stresses imposed on the stent and artery during the stenting procedure. The results obtained have been compared with the available literature and found that the curvature cell design develops lower stresses and, hence, be suitable for better performance and life.

In Silico analysis of stent deployment- effect of stent design

Coronary artery disease (CAD) remains the leading cause of death in Europe and worldwide. One of the most common pathologic processes involved in CAD is atherosclerosis. Coronary stents are expandable scaffolds that are used to widen the occluded arteries and enable the blood flow restoration. To achieve an adequate delivery and placement of coronary stents different parameters play a significant role. Due to the strain that the stents are exposed to and the forces they should withstand, the stent design is dominant. This study focuses on investigating the effect of the stent design in two finite element models using two stents with difference in the strut thickness. The in silico deployment is performed in a reconstructed patient specific arterial segment. The results are analyzed in terms of stress in the stent and the arterial wall and demonstrate how stent expansion is extensively affected by the scaffold's design.

Multi-Objective Optimization Design of Balloon-Expandable Coronary Stent

PURPOSE

Recent studies suggested that suboptimal delivery and longitudinal stent deformation can result in in-stent restenosis. Therefore, the purpose of this paper was to study the effect of stent geometry on stent flexibility and longitudinal stiffness (LS) and optimize the two metrics simultaneously. Then, the reliable and accurate relationships between metrics and design variables were established.

METHODS

A multi-objective optimization method based on finite element analysis was proposed for the investigation and improvement of stent flexibility and LS. The relative influences of design variables on the two metrics were evaluated on the basis of the main effects. Three surrogate models, namely, the response surface model (RSM), radial basis function neural network (RBF), and Kriging were employed and compared.

RESULTS

The accuracies of the three models in fitting flexibility were nearly similar, although Kriging made more accurate prediction in LS. The link width played important roles in flexibility and LS. Although the flexibility of the optimal stent decreased by 13%, the LS increased by 48.3%.

CONCLUSIONS

The obtained results showed that the multi-objective optimization method is efficient in predicting an optimal stent design. The method presented in this paper can be useful in optimizing stent design and improving the comprehensive mechanical properties of stents.