Stress Distribution on Various Implant-Retained Bar Overdentures

The purpose of this study was to evaluate the effects of various fabrication techniques and materials used in implant-supported mandibular overdentures with a Hader bar attachment over added stress distribution. Three-dimensional geometric solid models, consisting of two implants (3.3 mm × 12 mm) placed at the bone level on both mandibular canine regions and a Hader bar structure, were prepared. Model 1 simulated a bar retentive system made from Titanium Grade 5 material by Computer Numerical Control (CNC) milling technique without using any converting adapter/multi-unit element on the implants, while Model 2 simulated the same configuration, but with converting adapters on the implants. Model 3 simulated a bar retentive system made from Cobalt-Chromium material, made by using conventional casting technique with converting adapters on the implants. Static loads of 100 Newton were applied on test models from horizontal, vertical and oblique directions. ANSYS R15.0 Workbench Software was used to compare Von Mises stress distribution and minimum/maximum principal stress values, and the results were evaluated by using Finite Element Analysis method. As a result, the highest stress distribution values under static loading in three different directions were obtained in Model 1. Stress was observed intensely around the necks of the implants and the surrounding cortical bone areas in all models. In scope of the results obtained, using converting adapters on implants has been considered to decrease transmission of forces onto implants and surrounding bone structures, thus providing a better stress distribution. It has also been observed that the type of material used for bar fabrication has no significant influence on stress values in those models where converting adapters were used.

3D Printing beyond Dentistry during COVID 19 Epidemic: A Technical Note for Producing Connectors to Breathing Devices

(1) Background: To mitigate the shortage of respiratory devices during the Covid-19 epidemic, dental professional volunteers can contribute to create printed plastic valves, adapting the dental digital workflow and converting snorkeling masks in emergency CPAP (continuous positive airways pressure) devices. The objective of this report was to provide the specific settings to optimize printing with the 3D printers of the dental industry. (2) Methods: In order to provide comprehensive technical notes to volunteer dental professionals interested in printing Charlotte and Dave connectors to breathing devices, the entire digital workflow is reported. (3) Results: The present paper introduces an alternative use of the dental Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) machinery, and reports on the fabrication of a 3D printed connection prototypes suitable for connection to face masks, thereby demonstrating the feasibility of this application. (4) Conclusions: This call for action was addressed to dentists and dental laboratories who are willing to making available their experience, facilities and machinery for the benefit of patients, even way beyond dentistry.