Radiographic Outcomes of Preoperative CT Scan-Derived Patient-Specific Total Ankle Arthroplasty

Effect of Preoperative Coronal Plane Alignment on Actual Versus Predicted Alignment Using Patient Specific Instrumentation in Total Ankle Replacement

Alignment in total ankle replacement is important for success and implant survival. Recently there has been the introduction and adoption of patient specific instrumentation for implantation in total ankle replacement. Current literature does not evaluate the effect of preoperative deformity on accuracy of patient specific instrumentation. A retrospective radiographic analysis was performed on 97 consecutive patients receiving total ankle replacement with patient specific instrumentation to assess the accuracy and reproducibility of the instrumentation. Subgroup analysis evaluated the effect of preoperative deformity. All surgeries were performed by fellowship trained foot and ankle surgeons without industry ties to the implants used. Preoperative and postoperative films were compared to plans based on computerized tomography scans to assess how closely the plan would be implemented in patients. Overall postoperative coronal plane alignment was within 2° of predicted in 87.6% (85 patients). Similarly, overall postoperative sagittal plane alignment was within 2° of predicted in 88.7% (86 patients). Tibial implant size was accurately predicted in 81.4% (79 patients), and talus implant size was correct in 75.3% (73 patients). Patients with preoperative varus deformity had a higher difference between predicted and actual postoperative alignment compared to valgus deformity (1.1° compared to 0.3°, p = .02). A higher average procedure time was found in varus patients, and more adjunctive procedures were needed in patients with varus or valgus deformity, but these were not significant, p > .5. Surgeons can expect a high degree of accuracy when using patient specific instrumentation overall, but less accurate in varus deformity.

Accuracy of patient-specific instrumentation for implant positioning in custom-made total ankle arthroplasty

Purpose

This retrospective radiological analysis aimed to assess the accuracy of implant positioning in patients with ankle arthritis undergoing custom-made total ankle arthroplasty (TAA) with patient-specific instrumentation (PSI) compared with preoperative planning.

Methods

Patients who underwent custom-made TAA with PSI from January 2018 to March 2023 were retrospectively evaluated, focusing on the tibial anterior surface (TAS) angle, tibial lateral surface (TLS) angle and tibiotalar ratio (TTR). Additionally, data regarding the time from the preoperative computed tomography (CT) scan to surgery, associated procedures and complications were recorded.

Results

No associated procedures were performed, and only one intraoperative complication, an iatrogenic lateral malleolar fracture, was recorded. In the coronal plane, custom-made TAA with PSI consistently achieved precise positioning of prosthetic components, even in cases with significant preoperative deformities or bone deficits. However, a statistically significant deviation from the planned values was observed in the sagittal plane (p = 0.007). A notable correlation was identified between the time elapsed from the preoperative CT scan to surgery and the deviation from the planned to the actual postoperative TAS angle (p < 0.001).

Conclusion

This study underscores the efficacy of PSI systems in achieving precise positioning in the coronal plane, in accordance with preoperative planning. In contrast, sagittal plane positioning did not demonstrate the same level of accuracy, as evidenced by a statistically significant difference between the planned and postoperative TLS values. Nevertheless, all measurements remained within the recommended range according to the existing literature.

Level of Evidence

Level IV.

Early experience with a 3-D printed porous surface, fixed-bearing, total ankle arthroplasty: A minimum of 2-year follow-up

BACKGROUND

This is a pilot study reviewing patients undergoing ankle replacement with the 3-D printed INFINITY™ with ADAPTIS™ total ankle arthroplasty (TAA) system.

METHODS

A retrospective review was conducted of patients with a minimum two-year follow-up who underwent TAA with the INFINITY™ with ADAPTIS™ implant system. Outcome measures include implant survivorship, complications with subsequent reoperations, patient reported outcomes, and radiologic subsidence or radiolucency.

RESULTS

Thirty patients were included with median follow-up of 26 months (range, 24-36). Implant survival rate was 90% (27/30). Two patients experienced linear radiolucency > 2 mm: one required a revision TAA secondary to tibial subsidence; the other patient was asymptomatic and nonprogressive on serial radiographs. No cystic radiolucencies > 5 mm were identified. VAS, PROMIS PF, and FADI scores improved significantly.

CONCLUSION

TAA performed with the 3-D printed INFINITY™ with ADAPTIS™ implant technology led to ninety percent short term implant survivorship and improvement in patient reported outcomes with comparable results to other 4th generation arthroplasty systems as a treatment modality for end-stage ankle arthritis.

LEVEL OF EVIDENCE

Level III, Retrospective cohort study, Prognostic.

Two-Year Survivorship and Patient-Reported Outcomes of a Prospectively Enrolled Cohort of INFINITY Total Ankle Arthroplasties

BACKGROUND

The INFINITY total ankle implant is a widely and successfully used option for total ankle arthroplasty. The purpose of this study is to assess the 2-year survivorship, complication rates, patient-reported outcomes, and radiologic findings of prospectively enrolled patients undergoing a fixed-bearing total ankle arthroplasty (TAA). This study sought to determine if factors such as traditional vs patient-specific instrumentation, preoperative degree of arthritis, deformity, or etiology of arthritis impact surgical or clinical outcomes.

METHODS

A total of 143 prospectively enrolled patients (148 ankles) underwent TAA with a fixed-bearing total ankle implant between 2017 and 2019 at 9 different institutions by 9 different surgeons. A total of 116 completed 2-year follow-up. Patients were stratified by instrumentation used, degree of preoperative deformity, the Canadian Orthopaedic Foot and Ankle Society (COFAS) grading system, and etiology of arthritis. Outcomes used included implant survivorship and adverse events within 2 years of surgery. Additionally, patient-reported outcomes and radiographs were collected at 6-month, 1-year, and 2-year postoperatively. PROMs used included Ankle Osteoarthritis Score (AOS), Patient-Reported Outcomes Measurement Information System (PROMIS) global health score, the Foot and Ankle Outcome Score (FAOS), and patient satisfaction (rated from excellent to poor).

RESULTS

Implant survivorship at 2 years was 97.79%. There were 17 reoperations (11.5%), with 4 of the implants requiring revision (2.7%). Significant improvements in all PROMs were observed among all subgroups at all postoperative time points without significant variation between subgroups. Patients classified as COFAS type 2 arthritis preoperatively demonstrated significantly more improvement in FAOS Total Symptom Score at the 1- and 2-year measurements than COFAS type 3 patients at both time points.

CONCLUSION

Total ankle arthroplasty with a fixed-bearing implant system is a safe and reliable treatment option for patients with end-stage arthritis regardless of degree of deformity or COFAS grading.

LEVEL OF EVIDENCE

Level II, prospective cohort study.

Patient-Reported Outcomes in Total Ankle Arthroplasty: Patient Specific Versus Standard Instrumentation

BACKGROUND

Total ankle arthroplasty (TAA) can now be performed using patient-specific instrumentation (PSI). Advantages include the ability to preoperatively plan and reduce the number of intraoperative surgical steps. The aim of this study was to compare PSI with standard instrumentation (SI) in a nonrandomized retrospective cohort study with respect to patient-reported outcome measures (PROMs). Secondary aims were to compare complications, reoperations, tourniquet time, fluoroscopy time, and postoperative alignment.

METHODS

In all, 159 patients (111 men, 48 women) undergoing a total of 168 Infinity TAA (Stryker, Memphis, TN) using PSI (Prophecy, Stryker, Memphis, TN) or SI between 2014 and 2021 were included with a minimum follow-up of 12 months. The PROMs were obtained preoperatively and at 1 year, and included the Manchester-Oxford Foot Questionnaire (MOXFQ), Ankle Osteoarthritis Scale (AOS), and European Quality of Life 5 Dimension 3 Level (EQ-5D-3L). Coronal plane deformity correction was assessed using the midline tibiotalar angle (MTTA). Demographics, tourniquet time, and intraoperative fluoroscopy times were obtained from the hospital records.

RESULTS

There were 61 TAAs in the PSI group and 107 TAAs in the SI group. There was no significant difference in total MOXFQ, AOS, or EQ-5D. There was a significantly reduced tourniquet time (PSI mean: 95.39 minutes, SI mean: 116.87 minutes, P < .001) and radiation exposure (PSI mean: 31 seconds, SI mean: 53 seconds, P < .001). Angular correction was more accurate in the PSI group (PSI mean: 1.29°, SI mean: 2.26°, P = .005).

CONCLUSION

This study supports the use of PSI to decrease operative time, reduce intraoperative fluoroscopy, improve accuracy of implantation, and improve postoperative alignment in TAA. There was a significant difference (P = .032) in favor of PSI in the walking/standing domain of the MOXFQ at 12 months but no significant difference in overall PROMs.

LEVELS OF EVIDENCE

Level III, Retrospective.

Current Trends in Total Ankle Replacement

Ankle arthritis can result in significant pain and restriction in range of motion. Total ankle replacement (TAR) is a motion-preserving surgical option used as an alternative to total ankle arthrodesis to treat end-stage ankle arthritis. There are several generations of TAR techniques based on component design, implant material, and surgical technique. With more recent TAR implants, an attempt is made to minimize bone resection and mirror the native anatomy. There are more than 20 implant devices currently available. Implant survivorship varies among prosthesis types and generations, with improved outcomes reported with use of the more recent third- and fourth-generation ankle implants. Pre- and postoperative assessments of TAR are primarily performed by using weight-bearing radiography, with weight-bearing CT emerging as an additional imaging tool. Preoperative assessments include those of the tibiotalar angle, offset, and adjacent areas of arthritis requiring additional surgical procedures. US, nuclear medicine studies, and MRI can be used to troubleshoot complications. Effective radiologic assessment requires an understanding of the component design and corresponding normal perioperative imaging features of ankle implants, as well as recognition of common and device-specific complications. General complications seen at radiography include aseptic loosening, osteolysis, hardware subsidence, periprosthetic fracture, infection, gutter impingement, heterotopic ossification, and syndesmotic nonunion. The authors review several recent generations of TAR implants commonly used in the United States, normal pre- and postoperative imaging assessment, and imaging complications of TAR. Indications for advanced imaging of TAR are also reviewed. ©RSNA, 2023 Supplemental material is available for this article. Test Your Knowledge questions for this article are available through the Online Learning Center.

Two to Five-Year Outcomes of Total Ankle Arthroplasty with the Infinity Fixed-Bearing Implant: A Concise Follow-up of a Previous Report

LEVEL OF EVIDENCE

Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.

[Total arthroplasty of the ankle joint : Limitations and potentials]

Total arthroplasty of the ankle joint (TAA) has become an established treatment option for patients with advanced osteoarthritis of the ankle joint. A crucial factor for good long-term clinical results and standing times is careful patient selection, taking the indications, contraindications, and defined prognostic factors into account. Despite modern prosthetic designs, TAA remains a complex surgical procedure that requires precise surgical techniques in a specialized center. Various limitations exist, such as the implantation technique and experience of the surgeon and perioperative complications due to concomitant medications. Current research focuses on the optimization of implant designs, development of personalized surgical techniques, improvement of the long-term performance and minimization of perioperative complications. Future developments, such as the introduction of robot-assisted surgical systems and the integration of biological procedures are also discussed as technological perspectives.

Ankle and Foot Arthroplasty and Prosthesis: A Review on the Current and Upcoming State of Designs and Manufacturing

The foot and ankle serve vital roles in weight bearing, balance, and flexibility but are susceptible to many diverse ailments, making treatment difficult. More commonly, Total Ankle Arthroplasty (TAA) and Total Talus Replacement (TTR) are used for patients with ankle degeneration and avascular necrosis of the talus, respectively. Ankle prosthesis and orthosis are also indicated for use with lower limb extremity amputations or locomotor disability, leading to the development of powered exoskeletons. However, patient outcomes remain suboptimal, commonly due to the misfitting of implants to the patient-specific anatomy. Additive manufacturing (AM) is being used to create customized, patient-specific implants and porous implant cages that provide structural support while allowing for increased bony ingrowth and to develop customized, lightweight exoskeletons with multifunctional actuators. AM implants and devices have shown success in preserving stability and mobility of the joint and achieving fast recovery, as well as significant improvements in gait rehabilitation, gait assistance, and strength for patients. This review of the literature highlights various devices and technologies currently used for foot and ankle prosthesis and orthosis with deep insight into improvements from historical technologies, manufacturing methods, and future developments in the biomedical space.

Accuracy of a Patient-Specific Total Ankle Arthroplasty Instrumentation

BACKGROUND

Total ankle arthroplasty (TAA) is a preferred surgical option for end-stage ankle osteoarthritis; however, it is a demanding procedure with a higher historical rate of revision compared with ankle fusion. Patient-specific instrumentation (PSI) has been introduced to optimize prosthesis alignment and theoretically overall improve TAA outcomes. The goal of this study is to report on the experience and surgical outcomes of one implant with specific evaluation of the accuracy and reproducibility of the system with respect to prosthesis alignment and prediction of implant size.

METHODS

A retrospective, multicentered study involving 4 foot and ankle fellowship-trained orthopaedic surgeon's patients undergoing TAA between January 1, 2015, and December 31, 2018, using the PROPHECY PSI system.

RESULTS

80 TAA procedures were performed. On average the postoperative tibial component alignment was 89.9 (range, 86.1-96.5) degrees in the coronal plane, with a mean sagittal alignment of 88.1 (range, 81.3-96.7) degrees. The mean deviation from neutral sagittal alignment improved from 4.9 ± 3.9 degrees preoperatively to 2.7 ± 1.7 degrees postoperatively, whereas the mean coronal alignment improved from 3.3 ± 2.5 degrees to 1.3 ± 1.1 degrees. The PSI software correctly determined the tibial implant size in 70 patients (89%). Prediction of talar implant sizing was less accurate than the tibial component, with 56 patients (71%) using the predicted sized implant. The overall implant survival at a mean follow-up of 45 months (range, 27-76) was 97.5%.

CONCLUSION

We found that this PSI system accurately and reliably assisted in implant total ankle prosthesis positioning within a clinically acceptable margin and without significant outliers. Prediction of implant size was not as accurate as component orientation.

LEVEL OF EVIDENCE

Level III, retrospective study.

Robotic-assisted foot and ankle surgery: a review of the present status and the future

The surgical application of robotics has increased significantly since its first application in 1985 for a brain biopsy acquisition. Robotic-assisted surgery has been one of the viable options in various surgical areas, and also in orthopaedic surgery. Robotic-assisted orthopaedic surgery has gained popularity as a mean of improving accuracy, reducing complications and achieving better patient satisfaction. Numerous clinical research studies have demonstrated advantages of robotic-assisted orthopaedic surgery, however, most of that researches were about the total knee arthroplasty, total hip arthroplasty and spine surgery. The application of robotic technology in foot and ankle surgery is in a very nascent stage. Furthermore, there has been little research on intraoperative use of robotics in foot and ankle surgery in literature. A review of previous preclinical studies in foot and ankle robotics and clinical research studies in various fields of robot-assisted orthopaedic surgery shows that its potential application and benefits over conventional techniques, such as total ankle arthroplasty, minimally invasive surgery for foot and ankle trauma or other corrective procedure, and intraoperative biomechanical testing. More studies on practical application of robotic technology to surgical procedure in the field of foot and ankle surgery are needed to confirm its clinical usefulness and cost effectiveness.

Republication of "Perspectives in Treatments of End-Stage Ankle Arthritis Among Orthopaedic Surgeons: Analysis of an American Orthopaedic Foot & Ankle Society (AOFAS) Member Survey"

Background

This study aimed to assess the preferred operative treatment for patients over the age of 60 with end-stage ankle arthritis and perspectives on total ankle replacement (TAR) among American Orthopaedic Foot & Ankle Society (AOFAS) members. Associated factors were analyzed for potential contraindications among members with different levels of experience.

Method

A questionnaire containing 6 questions was designed and sent to 2056 members of the AOFAS. Responses were received from 467 orthopaedic surgeons practicing in the United States (76%), Canada (5%), and 26 other countries (20%). Participants were grouped for response comparisons according to country as well as experience level. Differences in contraindications were compared using χ2 tests or exact tests.

Results

Respondents practicing in the United States and surgeons who perform 11 or more TARs per year tended to recommend operative treatments favoring TAR and displayed recognition of its increasing role (P < .05). Overall, respondents felt that 41% of typical patients over 60 years old with end-stage arthritis would be best treated with TAR. Talus avascular necrosis, morbid obesity (body mass index >40 kg/m2), and poorly controlled diabetes with neuropathy were most recognized as the absolute contraindications to TAR. Surgeon's experience affected the consideration of these clinical factors as contraindications.

Conclusions

Total ankle replacement has a substantial and increasing role in the treatment of end-stage ankle arthritis in patients over the age of 60. Absolute and potential contraindications of the procedures were indicated from a cross-sectional survey of AOFAS members. Surgeons more experienced with total ankle replacement felt more comfortable employing it in a wider range of clinical settings.

Level of Evidence

Level III, therapeutic.

An Analysis of 50 Consecutive Total Ankle Replacements Undergoing Preoperative Computerized Tomography Scan-Based, Engineer-Provided Planning From a Single Noninventor, Nonconsultant Surgeon

Preoperative computerized tomography (CT) scan-based, engineer-provided alignment plans and patient-specific pinning blocks for total ankle replacement (TAR) are available for use in the United States. However, nonbiased studies that justify the additional expense associated with this technology through support of the marketed benefits of less procedural complexity, less intraoperative radiation and reduced surgical time, are lacking. Therefore, to verify the manufacturer's proposed benefits, we sought to investigate our experience with this preoperative CT scan-based, engineer-provided plan and patient-specific pinning blocks during primary TAR. In review of our 50 TAR patients, we found that "perfect" radiographic alignment was not consistently achieved and the accuracy of component prediction was modest. Furthermore, the preoperative plans and patient-specific pinning blocks did not simplify the complexity of our operations since the operative time, intraoperative image intensification time and radiation dose per case all exceeded published historical TAR controls. Interestingly, we identified a significant difference in placement accuracy between the arced and flat-top talar component types that were implanted with the arced being more frequently malaligned. We did not find associations between preoperative deformity severity and accuracy of postoperative alignment. These findings suggest that it is imperative to have surgeons continue to rely on their own surgical planning and experience to achieve optimum radiographic alignment rather than depending on engineer-based recommendations or "surface matched" pinning blocks. Ultimately, we were unable to support the purported benefits of this CT scan-based, engineer-provided alignment plan and patient-specific pinning blocks for this manufacturer's primary TAR systems.

Computed Tomography Derived Patient-specific Instrumentation Total Ankle Arthroplasty Survivorship Outcomes

Computed tomography (CT) derived patient-specific total ankle arthroplasty (TAA) systems have been utilized for improved accuracy and reproducible implant alignment. The purpose of the present study was to report the overall implant survivorship as well as radiographic analysis of patients who underwent primary TAA utilizing CT-derived patient-specific instrumentation. A retrospective review of medical charts and radiographs were performed on patients who had undergone primary TAA at a single institution in the Midwest region from March 2013 to October 2020. Radiographic analysis included preoperative, initial postoperative, and final follow-up coronal and sagittal tibiotalar alignment as well as periprosthetic radiolucency. A total of 96 patients with a mean follow-up of 3 years (range, 0.3-7.3 years) were included. Implant survivorship was found to be 92% at median follow-up of 3 years. A total of 8 cases (8.3%) required revision/reoperation, with 6 (6.3%) of these reoperations directly related for failure of one of the metallic implant components. There was significant improvement in both coronal and sagittal tibiotalar alignment from preoperative to initial postoperative follow-up (p < .001). At latest postoperative follow-up, there were 88% of TAAs that remained in a neutral alignment following surgery. A total of 10 cases were found to have radiolucency at latest follow-up. In conclusion, the use of CT derived patient-specific TAA showed high implant survivorship with significant improvement of sagittal and coronal tibiotalar alignment. With better implant alignment and position, it potentially reduces the risk of early implant failure or implant loosening in long-term follow-up.

Patient Specific Instruments and Patient Individual Implants—A Narrative Review

Joint arthroplasties are one of the most frequently performed standard operations worldwide. Patient individual instruments and patient individual implants represent an innovation that must prove its usefulness in further studies. However, promising results are emerging. Those implants seem to be a benefit especially in revision situations. Most experience is available in the field of knee and hip arthroplasty. Patient-specific instruments for the shoulder and upper ankle are much less common. Patient individual implants combine individual cutting blocks and implants, while patient individual instruments solely use individual cutting blocks in combination with off-the-shelf implants. This review summarizes the current data regarding the implantation of individual implants and the use of individual instruments.

Summary Report of the Arthritis Foundation and the American Orthopaedic Foot & Ankle Society's Symposium on Targets for Osteoarthritis Research: Part 2: Treatment Options

This second of a 2-part series of articles recounts the key points presented in a collaborative symposium sponsored jointly by the Arthritis Foundation and the American Orthopaedic Foot & Ankle Society with the intent to survey current treatment options for osteoarthritis (OA) of the foot and ankle. A meeting was held virtually on December 10, 2021. A group of experts were invited to present brief synopses of the current state of knowledge and research in this area. Topics were chosen by meeting organizers, who then identified and invited the expert speakers. Part 2 overviews the current treatment options, including orthotics, non-joint destructive procedures, as well as arthroscopies and arthroplasties in ankles and feet. Opportunities for future research are also discussed, such as developments in surgical options for ankle and the first metatarsophalangeal joint. The OA scientific community, including funding agencies, academia, industry, and regulatory agencies, must recognize the importance to patients of addressing the foot and ankle with improved basic, translational, and clinical research.

LEVEL OF EVIDENCE

Level V, review article/expert opinion.

Clinical and Radiographic Outcomes of Revision Total Ankle Arthroplasty Using the INBONE II Prosthesis

BACKGROUND

The literature on the outcome of revision total ankle arthroplasty (TAA) remains limited. In this study, we aimed to report the clinical and radiographic outcomes of revision TAA at a high-volume center in the United Kingdom.

METHODS

This study was a retrospective review of 28 patients who underwent 29 revision TAAs using the INBONE II Total Ankle System (Wright Medical Technology/Stryker). Demographic, radiographic, and patient-reported outcome measure data were analyzed.

RESULTS

The mean duration from primary TAA to revision was 87.5 months (range, 16 to 223 months). The main indication for the revision was aseptic loosening after the primary TAA (83%). Additional procedures were required in 76% of ankles. At a mean follow-up of 40 months (range, 24 to 60 months), the infection rate was 7%, the reoperation rate was 7%, and the implant survival rate was 97%. A significant postoperative improvement in the radiographic component alignment measures was observed. The subsidence, loosening, and heterotopic ossification rates in this study were comparable with those in other reports and did not influence the clinical outcome. A significant improvement was observed in the Manchester-Oxford Foot Questionnaire (MOXFQ) in all domains and the EuroQol-5 Dimensions (EQ-5D) in 3 domains at 24 months postoperatively.

CONCLUSIONS

Revision TAA using the INBONE II prosthesis was associated with good short-term survival and improvement in postoperative scores at 2 years. Maintenance of the postoperatively improved alignment was documented at the follow-up. The results of this study support the notion that revision TAA is a satisfactory option for failed primary TAA.

LEVEL OF EVIDENCE

Therapeutic Level IV . See Instructions for Authors for a complete description of levels of evidence.

Preliminary Report of a Hybrid Total Ankle Arthroplasty Combining a Stemmed Intramedullary Tibial Component With Chamfer-Cut Talar Dome

Total ankle arthroplasty (TAA) is a viable treatment for end-stage ankle arthritis. In our experience, a stemmed intramedullary tibial component combined with a chamfer-cut talar component provides the most stable construct for TAA. We present our technique for placement of this hybrid prosthesis utilizing the INBONE tibial component in combination with the INFINITY talar component. This technique differs from the standard protocol by minimizing use of both patient-specific and standard intraoperative guides. The primary aim of this study is to report our preliminary outcomes with our novel technique. Secondarily, we aim to demonstrate that placement of this hybrid prosthesis is radiographically reproducible and accurate. The first 10 patients undergoing this technique with at least 1 year of follow-up were retrospectively reviewed. Average visual analog pain scale decreased from 7.4 preoperatively to 0.5 at 1 year postoperatively. The average time to weightbearing was 6.4 weeks. Complications were minimal, and no implant-related complications were encountered. First weightbearing ankle radiographs postoperatively were evaluated by 3 reviewers to determine accuracy of the tibial intramedullary stem in relation to the anatomical axis of the tibia. We found that the deviation of the tibial implant from the anatomic axis was on average 0.9°± 0.5° in the coronal plane, and 2.2°± 2.7° in the sagittal plane. Inter-rater reliability was 83%. We conclude that this hybrid technique utilizing a stemmed intramedullary tibial component in combination with a chamfer-cut talar component for TAA is reproducible, accurate, and safe.

Effects of Patient-Specific Instrumentation and Ancillary Surgery Performed in Conjunction With Total Ankle Implant Arthroplasty: Postoperative Radiographic Findings

Accuracy and reproducibility when performing total ankle implant arthroplasty (TAA) are essential for longevity of the implant, maintaining relative stability of the joint, and theoretically reducing the formation of adjacent joint arthritis in the subtalar and knee joints. Studies have helped to illustrate the accuracy of implantation when using patient-specific instrumentation in both knee and ankle implant arthroplasty. Despite the findings of these studies, few have gone on to evaluate the effects of ancillary procedures on TAA; particularly their effects on postoperative implant congruity when performed simultaneously with joint replacement surgery. In this study, preoperative plans on implant alignment based on patient-specific computed tomography images were compared with the alignment observed on immediate postoperative radiographs. Additionally, postoperative joint congruity was measured, and operative reports were assessed to determine if concomitant procedures performed with total ankle replacement had a significant effect on overall alignment. In our population, 46/47 implants were within 1.5° of their anticipated placement in the coronal plane, and 100% were within 2° of anticipated placement in the sagittal plane. Using a spearman's rank-order correlation, our data failed to show any significant relationship between conducting additional procedures in conjunction with TAA (rho = 0.178; p value = .232) and postoperative congruency of the implant. These findings help support the accuracy of ankle implantation using patient-specific instrumentation, while also supporting the appropriate use of indicated procedures in conjunction with total ankle replacement to help obtain a congruent joint postoperatively.

Patient-Specific Instrumentation vs Standard Referencing in Total Ankle Arthroplasty: A Comparison of the Radiologic Outcome

BACKGROUND

Existing literature on the superiority of patient-specific instrumentation (PSI) in total ankle arthroplasty (TAA) over standard referencing (SR) is limited. Advantages presented include better implant alignment, shorter operating times, and increased accuracy of implant size prediction. The aim of this retrospective study was to analyze PSI in the hands of an experienced foot and ankle surgeon new to both PSI and SR for this specific implant, in regard to determining implant alignment, operative times, and radiologic short-term outcome and predicting implant size for tibial and talar components.

METHODS

Twenty-four patients undergoing TAA using PSI were compared to 25 patients using SR instrumentation. Outcome measures included alignment of the tibial component (α coronal plane, γ sagittal plane), the tibiotalar tilt (β), and the talar offset x on the sagittal view as well as the presence of radiolucent lines, operation time, and wound healing. Postoperative outcome was assessed at 6 weeks, 4 months, and 1 year postoperatively.

RESULTS

Implant positioning was similar in both groups, and no advantage in regard to the operative time could be seen when comparing TAA using PSI to SR. Implant size prediction was more reliable for the tibia than for the talus. Three patients (1 from the SR group and 2 from the PSI group) showed radiolucent lines around the tibial component. Two patients (both SR group) suffered delayed wound healing, albeit not requiring any additional measures.

CONCLUSION

The PSI method did not show an advantage over SR in regard to positioning of the components or the duration of the surgery. The current study suggests that no initial advantage of PSI over SR are to be expected in standard total ankle replacement.

LEVEL OF EVIDENCE

Level III, retrospective study.

Patient-specific instrumentation in total ankle arthroplasty

The recent increase in the adoption of total ankle arthroplasty (TAA) reflects the improvements in implant designs and surgical techniques, including the use of preoperative navigation system and patient-specific instrumentation (PSI), such as custom-made cutting guides. Cutting guides are customized with respect to each patient's anatomy based on preoperative ankle computed tomography scans, and they drive the saw intra-operatively to improve the accuracy of bone resection and implant positioning. Despite some promising results, the main queries in the literature are whether PSI improves the reliability of achieving neutral ankle alignment and more accurate implant sizing, whether it is actually superior over standard techniques, and whether it is cost effective. Moreover, the advantages of PSI in clinical outcomes are still theoretical because the current literature does not allow to confirm its superiority. The purpose of this review article is therefore to assess the current literature on PSI in TAA with regard to current implants with PSI, templating and preoperative planning strategies, alignment and sizing, clinical outcomes, cost analysis, and comparison with standard techniques.

Outcomes and Complications of the INFINITY Total Ankle: A Systematic Review

IV.

The 15 year ankle arthroplasty experience in a university hospital

INTRODUCTION

The study aim was to review the experience of ankle replacement surgery in a university teaching hospital.

METHODS

A retrospective review of primary ankle replacements performed between 2005 and 2019 was undertaken. Implant survival and reasons for revision surgery were assessed, along with patient reported outcomes and complications.

RESULTS

There were 157 ankle replacements implanted in 140 patients with a mean follow up 7.5 years (range 1.0-14.5). There were 108 Mobility™, 19 Zenith™ and 30 Infinity™ ankle replacements with an overall revision rate of 9.6% at a mean 4.0 years (range 0.1-11.0). Overall survivorship analysis for 5, 10 and 15 years was respectively 92.4%, 89.3% and 86.6%.

DISCUSSION

The revision rate was comparable to international registers and aseptic loosening was the commonest reason for revision. This study, in a teaching university hospital with an average of 10 primary ankle replacements each year, highlighted ankle arthroplasty provides good functional outcomes and medium term implant survivorship. This supports the use of ankle arthroplasty within foot and ankle specialist centres achieving appropriate outcomes.

Total ankle arthroplasty results using fixed bearing CT-guided patient specific implants in posttraumatic versus nontraumatic arthritis

BACKGROUND

Patients who undergo total ankle arthroplasty (TAA) for end-stage posttraumatic ankle osteoarthritis have previously reported more complications and lower satisfaction than those with non-traumatic etiologies. The purpose of this study was to evaluate clinical and radiographic outcomes in these two patient groups after TAA using a newer generation implant.

METHODS

Patients underwent TAA with a third generation implant using CT-based patient-specific cutting guides. Patients were evaluated clinically using the Foot and Ankle Ability Measure (FAAM) and radiographically at a mean follow up of 32, and 24 months respectively.

RESULTS

Forty-one patients were studied (26 posttraumatic, 15 nontraumatic). There were no significant differences between the two study groups in FAAM scores (p=0.3423) and radiographic measurements.

CONCLUSION

We were able to show comparable results in terms of patient satisfaction, short term clinical and radiographic results between traumatic and nontraumatic patients using newer patient specific implant systems.

Accuracy of CT-Derived Patient-Specific Instrumentation for Total Ankle Arthroplasty: The Impact of the Severity of Preoperative Varus Ankle Deformity

BACKGROUND

Significant preoperative varus tibiotalar deformity was once believed to be a contraindication for total ankle arthroplasty (TAA). Our primary goal was to evaluate the influence of increasing preoperative varus tibiotalar deformity on the accuracy of final implant positioning using computed tomography (CT)-derived patient-specific guides for TAA.

METHODS

Thirty-two patients with varus ankle arthritis underwent TAA using CT-derived patient-specific guides. Patients were subcategorized into varying degrees of deformity based on preoperative tibiotalar angles (0°-5° neutral, 6°-10° mild, 11°-15° moderate, and >15° severe). Postoperative weightbearing radiographs were used to measure coronal plane alignment of the tibial implant relative to the target axis determined by the preoperative CT template. Average follow-up at the time of data collection was 36.8 months.

RESULTS

Average preoperative varus deformity was 6.06° (range: 0.66°-16.3°). Postoperatively, 96.9% (30/31) of patients demonstrated neutral implant alignment. Average postoperative tibial implant deviation was 1.54° (range: 0.17°-5.7°). Average coronal deviation relative to the target axis was 1.61° for the neutral group, 1.78° for the mild group, 0.94° for the moderate group, and 1.41° for the severe group (P = .256). Preoperative plans predicted 100% of tibial and talar implant sizes correctly within 1 size of actual implant size. Conclusion. Our study supports the claim that neutral postoperative TAA alignment can be obtained using CT-derived patient-specific instrumentation (PSI). Furthermore, final implant alignment accuracy with PSI does not appear to be impacted by worsening preoperative varus deformity. All but one patient (96.9%) achieved neutral postoperative alignment relative to the predicted target axis.

LEVEL OF EVIDENCE

Level IV, Clinical Case Series.

Preoperative Guidance With Weight-Bearing Computed Tomography and Patient-Specific Instrumentation in Foot and Ankle Surgery

The use of preoperative and intraoperative guidance in foot and ankle surgery has grown substantially in recent years. Weight-bearing computed tomography (WBCT) and patient-specific instrumentation (PSI) are used in total ankle arthroplasty (TAA) to achieve precise bone cutting and implant positioning, and intraoperative 3-dimensional (3D) imaging has been used to reduce complications and improve clinical outcomes in other foot and ankle surgical procedures. This narrative review of the literature focuses on the evidence supporting the use of WBCT and PSI in TAA and looks at other promising technologies used to guide foot and ankle surgery.

Accuracy of Weightbearing CT Scans for Patient-Specific Instrumentation in Total Ankle Arthroplasty

Background:

Total ankle arthroplasty (TAA) is a popular and viable option for end-stage ankle arthritis. Posttraumatic arthritis is the most common etiology of ankle arthritis, which creates the additional challenge of osseus deformity. Accuracy and reproducibility in placing the implant on the mechanical axis has been shown to be paramount in all joint arthroplasty including total ankle replacement. Patient-specific preoperative navigation is a relatively new technology for TAA, and up until this past year has been based off of nonweightbearing (NWBCT) or simulated weightbearing computed tomography (WBCT). Our institution has created a protocol to use WBCT in the preoperative patient-specific navigation for TAA using the Prophecy system. The purpose of our study was to compare the accuracy and reproducibility of implant alignment and size using WBCT vs prior studies using NWBCT for the Prophecy reports.

Methods:

All patients from July 2019 through October 2020 who underwent TAA were evaluated. Inclusion criteria consisted of primary TAA using patient-specific preoperative navigation who had postoperative radiographs in the 4-6-week time frame. Prophecy predictions and measurements were then compared to actual implant placement and size.

Results:

Ten patients met our inclusion criteria of WBCT Prophecy preoperative planning using 2 different implant systems. Preoperative deformities in this cohort were small. The average postoperative coronal alignment was 0.84 degrees, range 0.19 to 2.4 degrees. Average postoperative sagittal plane deformity was 1.9 degrees, range 0.33 to 5.05 degrees. Tibial component size was properly predicted in all patients, talar component in 9 of 10.

Conclusion:

This initial report supports accuracy and reproducibility in preoperative patient-specific navigation when using WBCT for TAA with these implants. All TAAs were within the intended target of less than 5 degrees varus or valgus.

Level of Evidence:

Level III, retrospective comparative analysis.

Patient-specific instrumentation (PSI) in total ankle arthroplasty: a systematic review

BACKGROUND

Patient-specific instrument (PSI) may theoretically make total ankle arthroplasty (TAA) more accurate. Several studies have reported the outcomes of PSI TAA. The aim of this study is to systematically review the literature of PSI TAA.

METHODS

PubMed, Embase, Web of Science, and Cochrane Library databases were systematically reviewed according to the Preferred Reporting Items for Systematic Reviews and Meta-analysis (PRISMA) guidelines for PSI TAA. The quality of the included studies was evaluated according to Methodological Index for Non-Randomized Studies (MINORS).

RESULT

Nine articles were ultimately included in the systematic review. The implant position and function outcome of TAA was similar between PSI and SI. Prediction accuracy of implant size remained great difference. PSI can shorten the operative time and fluoroscopy time. The quality of current studies on PSI TAA is insufficient to produce high-level evidence.

CONCLUSION

PSI can get similar implant position and clinical outcome in TAA compared to SI, but current evidence is not strong enough to evaluate PSI TAA.

Establishing a New Patient-Specific Implantation Technique for Total Ankle Replacement: An In Vitro Study

BACKGROUND

Revision rates after total ankle replacements (TARs) are higher compared with other total joint replacements. The present study aimed to establish a new patient-specific implantation (PSI) technique for TAR.

MATERIAL AND METHODS

A total of 10 complete Caucasian cadaver legs had whole leg computed tomography scans. The individual geometrical ankle joint axis was determined, and based on this axis, the position of the prosthesis was planned. We assessed prosthesis placement, guiding block position, and preoperative and postoperative ankle rotational axes.

RESULTS

The guiding block position interobserver reliability was 0.37 mm 0.45 (mean ± SD) for the tibial guiding block. The value for the first talar guiding block was 1.72 ± 1.3 mm and for the second talar guiding block, 0.61 ± 0.39 mm. The tibial slope as well as the frontal angles of the anatomical tibial axis compared to the tibial and talar articular surfaces showed no statistically relevant differences with numbers available. The deviation of the assessed preoperative joint axis to the postoperative joint axis was 14.6° ± 7.8.

CONCLUSION

The present study describes the results of an establishing process of a new PSI technique for TAR. The reliability of guiding block positioning and, thereby, prosthesis placement is sufficient.

LEVEL OF EVIDENCE

Biomechanical study.

Early experience and patient-reported outcomes of 503 INFINITY total ankle arthroplasties

AIMS

This is a multicentre, non-inventor, prospective observational study of 503 INFINITY fixed bearing total ankle arthroplasties (TAAs). We report our early experience, complications, and radiological and functional outcomes.

METHODS

Patients were recruited from 11 specialist centres between June 2016 and November 2019. Demographic, radiological, and functional outcome data (Ankle Osteoarthritis Scale, Manchester Oxford Questionnaire, and EuroQol five-dimension five-level score) were collected preoperatively, at six months, one year, and two years. The Canadian Orthopaedic Foot and Ankle Society (COFAS) grading system was used to stratify deformity. Early and late complications and reoperations were recorded as adverse events. Radiographs were assessed for lucencies, cysts, and/or subsidence.

RESULTS

In all, 500 patients reached six-month follow-up, 420 reached one-year follow-up, and 188 reached two-year follow-up. The mean age was 67.8 years (23.9 to 88.5). A total of 38 patients (7.5%) presented with inflammatory arthritis. A total of 101 (20.0%) of implantations used patient-specific instrumentation; 167 patients (33.1%) underwent an additional procedure at the time of surgery. A total of seven patients died of unrelated causes, two withdrew, and one was lost to follow-up. The mean follow-up was 16.2 months (6 to 36). There was a significant improvement from baseline across all functional outcome scores at six months, one, and two years. There was no significant difference in outcomes with the use of patient-specific instrumentation, type of arthritis, or COFAS type. Five (1.0%) implants were revised. The overall complication rate was 8.8%. The non-revision reoperation rate was 1.4%. The 30-day readmission rate was 1.2% and the one-year mortality 0.74%.

CONCLUSION

The early experience and complications reported in this study support the current use of the INFINITY TAA as a safe and effective implant in the treatment of end-stage ankle arthritis. Cite this article: Bone Joint J 2021;103-B(7):1270-1276.

Heterotopic Ossification in Total Ankle Arthroplasty: Case Series and Systematic Review

Heterotopic ossification after total ankle arthroplasty (TAA) is a known sequela and has been reported to contribute to reduced range of motion and poor functional outcomes. However, conflicting results have been reported in the literature. The present study documents the incidence of heterotopic ossification for a novel fourth-generation fixed-bearing 2-component prosthesis and reports a systematic review of the literature. We reviewed the incidence and functional outcome of consecutively enrolled patients who underwent primary Infinity TAA between 2013 and 2015 in a prospective observational study. Preoperative and postoperative radiographic and functional outcome data were collected. A systematic review was also conducted investigating all published studies between 1998 and 2018 reporting the incidence of heterotopic ossification after TAA. The incidence of heterotopic ossification was 70.5% in the 61 patients who underwent primary TAA in the case series. There was no association between heterotopic ossification and American Orthopaedic Foot and Ankle Society (AOFAS) score, foot function index (FFI), visual analogue scale (VAS), and ankle osteoarthritis scale (AOS). Sixteen studies on 1339 TAA implants were included. The overall incidence of heterotopic ossification after TAA was 66.0% at average 3.6 years (range 22.2% to 100%). Four studies (299 ankles) did not address functional outcomes. Eleven studies (960 ankles) reported no association between heterotopic ossification and functional outcomes. One study (80 ankles) reported a statistically significant difference in range of motion (7°) and AOFAS score (7 points). In conclusion, although the incidence of heterotopic ossification after TAA is considerable, there is insufficient literature to suggest that heterotopic ossification after TAA impacts range of motion or functional outcome.

From Patient to Procedure: The Process of Creating a Custom 3D-Printed Medical Device for Foot and Ankle Pathology

Three-dimensional (3D) printing technology has advanced greatly over the past decade and is being used extensively throughout the field of medicine. Several orthopaedic surgery specialties have demonstrated that 3D printing technology can improve patient care and physician education. Foot and ankle pathology can be complex as the 3D anatomy can be challenging to appreciate. Deformity can occur in several planes simultaneously and bone defects either from previous surgery or trauma can further complicate surgical correction. Three-dimensional printing technology provides an avenue to tackle the challenges associated with complex foot and ankle pathology. A basic understanding of how these implants are designed and made is important for surgeons as this technology is becoming more widespread and the clinical applications continue to grow within foot and ankle surgery.Levels of Evidence: Level V.

Clinical applications of custom 3D printed implants in complex lower extremity reconstruction

Background

Three dimensional printing has greatly advanced over the past decade and has made an impact in several industries. Within the field of orthopaedic surgery, this technology has vastly improved education and advanced patient care by providing innovating tools to complex clinical problems. Anatomic models are frequently used for physician education and preoperative planning, and custom instrumentation can assist in complex surgical cases. Foot and ankle reconstruction is often complicated by multiplanar deformity and bone loss. 3D printing technology offers solutions to these complex cases with customized implants that conform to anatomy and patient specific instrumentation that enables precise deformity correction.

Case presentation

The authors present four cases of complex lower extremity reconstruction involving segmental bone loss and deformity – failed total ankle arthroplasty, talus avascular necrosis, ballistic trauma, and nonunion of a tibial osteotomy. Traditional operative management is challenging in these cases and there are high complication rates. Each case presents a unique clinical scenario for which 3D printing technology allows for innovative solutions.

Conclusions

3D printing is becoming more widespread within orthopaedic surgery. This technology provides surgeons with tools to better tackle some of the more challenging clinical cases especially within the field of foot and ankle surgery.

A new ligament-compatible patient-specific 3D-printed implant and instrumentation for total ankle arthroplasty: from biomechanical studies to clinical cases

Background

Computer navigation and patient-specific instrumentation for total ankle arthroplasty have still to demonstrate their theoretical ability to improve implant positioning and functional outcomes. The purpose of this paper is to present a new and complete total ankle arthroplasty customization process for severe posttraumatic ankle joint arthritis, consisting of patient-specific 3D-printed implant and instrumentation, starting from a ligament-compatible design.

Case presentation

The new customization process was proposed in a 57-year-old male patient and involved image analysis, joint modeling, prosthesis design, patient-specific implant and instrumentation development, relevant prototyping, manufacturing, and implantation. Images obtained from a CT scan were processed for a 3D model of the ankle, and the BOX ankle prosthesis (MatOrtho, UK) geometries were customized to best fit the model. Virtual in silico, i.e., at the computer, implantation was performed to optimize positioning of these components. Corresponding patient-specific cutting guides for bone preparation were designed. The obtained models were printed in ABS by additive manufacturing for a final check. Once the planning procedure was approved, the models were sent to final state-of-the-art additive manufacturing (the metal components using cobalt-chromium-molybdenum powders, and the guides using polyamide). The custom-made prosthesis was then implanted using the cutting guides. The design, manufacturing, and implantation procedures were completed successfully and consistently, and final dimensions and location for the implant corresponded with the preoperative plan. Immediate post-op X-rays showed good implant positioning and alignment. After 4 months, clinical scores and functional abilities were excellent. Gait analysis showed satisfactory joint moment at the ankle complex and muscle activation timing within normality.

Conclusions

The complete customization process for total ankle arthroplasty provided accurate and reliable implant positioning, with satisfactory short-term clinical outcomes. However, further studies are needed to confirm the potential benefits of this complete customization process.

Level of evidence

5. Case report.

Medical 3D Printing Cost-Savings in Orthopedic and Maxillofacial Surgery: Cost Analysis of Operating Room Time Saved with 3D Printed Anatomic Models and Surgical Guides

RATIONALE AND OBJECTIVE

Three-dimensional (3D) printed anatomic models and surgical guides have been shown to reduce operative time. The purpose of this study was to generate an economic analysis of the cost-saving potential of 3D printed anatomic models and surgical guides in orthopedic and maxillofacial surgical applications.

MATERIALS AND METHODS

A targeted literature search identified operating room cost-per-minute and studies that quantified time saved using 3D printed constructs. Studies that reported operative time differences due to 3D printed anatomic models or surgical guides were reviewed and cataloged. A mean of $62 per operating room minute (range of $22-$133 per minute) was used as the reference standard for operating room time cost. Different financial scenarios were modeled with the provided cost-per-minute of operating room time (using high, mean, and low values) and mean time saved using 3D printed constructs.

RESULTS

Seven studies using 3D printed anatomic models in surgical care demonstrated a mean 62 minutes ($3720/case saved from reduced time) of time saved, and 25 studies of 3D printed surgical guides demonstrated a mean 23 minutes time saved ($1488/case saved from reduced time). An estimated 63 models or guides per year (or 1.2/week) were predicted to be the minimum number to breakeven and account for annual fixed costs.

CONCLUSION

Based on the literature-based financial analyses, medical 3D printing appears to reduce operating room costs secondary to shortening procedure times. While resource-intensive, 3D printed constructs used in patients' operative care provides considerable downstream value to health systems.

Morphometric geometric differences between right and left human tali: A cadaveric study of fluctuating asymmetry via systematic measurement and three-dimensional scanning

Background

Little is known about differences in the size and morphology of the right and left human tali. The present study demonstrates differences between right and left talar morphometric geometric profiles as fluctuating asymmetry in matched pairs of cadaveric specimens.

Methods

In total, 24 tali were collected in this study. All eligible tali were systematically measured with a Vernier caliper and three-dimensional laser scanner, which provided data for further analysis regarding the talar morphometric geometric profiles. Data were calculated to demonstrate differences between the right and left talar profiles using a matched-pair method, including the general size of the talus.

Results

The average talar length was 53.5 mm, the average talar dome height was 31.2 mm, and the average talar body width was 41.3 mm. The average anterior trochlear width, middle trochlear width, posterior trochlear width, and trochlear length were 31.8, 31.2, 28.3, and 30.7 mm, respectively. Eleven matched pairs of intact tali were eligible for the matched-pair study. Paired t-tests showed significant differences in the talar dome height (P = 0.019), middle trochlear width (P = 0.027), and posterior trochlear width (P = 0.016) between the right and left tali. However, there were no significant differences in the surface area or volume between the right and left tali.

Conclusion

Significant differences in the morphometric profile were found between the right and left matched pairs of tali. This basic information indicates that the profile of the contralateral talus may not be used as a single reference to reconstruct or duplicate the talus of interest in certain conditions such as talar prosthesis implantation or customized total ankle replacement.

Intraoperative Assessment of the Axial Rotational Positioning of a Modern Ankle Arthroplasty Tibial Component Using Preoperative Patient-Specific Instrumentation Guidance

BACKGROUND

The use of patient-specific instrumentation (PSI) in modern total ankle replacement (TAR) has augmented positioning of the tibial component, eliminating the need for complex jigs. Coronal and sagittal alignment are intuitive with this design and have been studied, but axial rotation has not. The purpose of this study was to assess the relationship between the planned preoperative axial rotation as set by the PSI guide and the rotation determined intraoperatively with non-PSI instrumentation.

METHODS

This was a prospective cohort study of 22 consecutive cases. The axial rotation angle between the medial gutter and the tibial implant position on the preoperative CT-scan based plan was extracted. At the time of surgery, the medial gutter alignment instrument from the non-PSI instrumentation was inserted and an intraoperative axial photograph obtained to record the angle between the medial gutter and the axial rotation guide pins set by the PSI instrumentation. The 2 measurements were compared and further statistical analysis included Pearson correlation and paired Student t test.

RESULTS

The average axial rotation angle between the medial gutter and the implant on the PSI preoperative plan was 5.4 ± 2.9 degrees, whereas the intraoperative photograph from the medial gutter alignment instrument to the pin was 5.9 ±3.8 degrees. This demonstrated a Pearson correlation of R = 0.54 and a P value of .53. The average difference between the two was -0.46 (95% CI: -2.04, 1.10), meaning that components were either slightly externally rotated or that the fork was aimed internally. Based on this group, 50% (11/22) were within 2 degrees of the target and 77% (17/22) were within 4 degrees of the target.

CONCLUSION

Patient-specific guides allowed for reproducible rotational tibial component implantation in modern TAR. Further work is needed to better understand the biomechanical effects of the rotational profile and consequences on survivorship.

LEVEL OF EVIDENCE

Level IV, case series.

Comparison of Time and Cost Savings Using Different Cost Methodologies for Patient-Specific Instrumentation vs Standard Referencing in Total Ankle Arthroplasty

Background:

Patient-specific 3-D printing cutting blocks (PSI) have been used instead of traditional intramedullary cutting guides. We hypothesized that PSI would lead to significantly decreased operating room (OR) time and significant cost savings to our institution with noninferior radiographic outcomes and no difference in expected vs actual implant size when compared with standard referencing (SR).

Methods:

Patients who had undergone total ankle replacements at our institution from 2013 through 2016 were included in the study. Associations between demographic variables and postoperative alignment in the SR vs PSI group were calculated using the Wilcoxon rank-sum test and the intraclass correlation coefficient. The cost of the operation was calculated using both an institutionally based fixed cost of OR time and using Time Driven Activity Based Cost (TDABC) accounting. A total of 43 patients were included in the study, 13 in the SR group and 30 in the PSI group.

Results:

Operative time (168 vs 137 minutes) and tourniquet time (123 vs 113 minutes) were significantly lower in the PSI vs the SR group. PSI predictions were accurate 100% of the time for tibial components and 83% of the time for talar components. Average costs of TAA using PSI were significantly reduced by $7597.00 when using traditional OR accounting, whereas PSI was $836.00 more expensive on average using TDABC accounting.

Conclusion:

Further research is needed to determine the cost-effectiveness of PSI vs SR in TAA; however, it does appear to save time intraoperatively. The long-term effect on clinical outcomes requires further study.

Level of Evidence:

Level III, case-control study.

Total Ankle Replacement Options

Total ankle arthroplasty has been in development for more than 40 years. Although early designs were experimental with high failure rates, current implants are significantly improved, showing promising functional results and clinical outcomes. Total ankle replacement designs are split into mobile-bearing and fixed-bearing designs. When deciding whether to perform ankle arthroplasty, many factors need to be considered to determine if the patient is suitable and which implant is the best fit for patient and surgeon. Many prostheses are available in the United States today and the purpose of this article is to outline options for foot and ankle surgeons.

The Bologna-Oxford ankle replacement: a case series of clinical and radiological outcomes

PURPOSE

The Bologna-Oxford (BOX®) total ankle arthroplasty (TAA) is a three-component mobile-bearing implant gaining popularity in Europe. We aimed to analyse the outcomes of this TAA.

METHODS

We retrospectively analysed data on 34 consecutive BOX® TAAs performed at a single centre with a mean follow-up of 58 months. Radiographic outcomes, such as periprosthetic lucency and alignment, were measured and recorded. Prospectively captured clinical scores and range of movement (ROM) were also recorded.

RESULTS

There were significant improvements in patient-reported outcome scores recorded in the Manchester-Oxford Foot Questionnaire (MOxFQ) for pain (43.8 ± 20.2, p < 0.001), standing and walking (55.6 ± 19.8, p < 0.001), social activities (45.0 ± 26.9, p < 0.02) and visual analogue score (VAS) (3.1 ± 2.5, p < 0.001). Mean improvement in ROM postoperatively was 18.7° (p < 0.001), with post-operative dorsiflexion 8.8° (10°-25°) and plantar flexion 32.6° (20°-40°). There was evidence of asymptomatic lucency on five radiographs (15%), which was present in 10% at three years. Nine patients had complications (26%): six (18%) requiring secondary surgery and one requiring revision (3%) for infection.

CONCLUSIONS

We have demonstrated 97% survivorship at a mean of 58 months. There are maintained improvements in clinical and radiological outcomes and reoperation that are consistent with the literature.

Accuracy of patient-specific instrumentation in total ankle arthroplasty: A comparative study

BACKGROUND

Patient-specific instrumentation (PSI) for TAA is a novel technology with several potential benefits. The primary goal of this study was to compare the use of PSI with the standard referencing guide (SRG) in regards to accuracy of tibial implant positioning. Operative time, fluoroscopy time and accuracy of PSI preoperative reports were also evaluated.

METHODS

A retrospective analysis of 99 patients who underwent a primary TAA with the INFINITY prosthesis (Wright Medical, Memphis, TN) was performed. Patients were divided in two groups based on the type of instrumentation used during the TAA (75 in the PSI group vs 24 in the SRG group). There was no significant difference between groups in regards to age at the time of surgery (P=0.122), sex (P=0.138), number of concomitant procedures performed during surgery (P=0.567) and etiology (P=0.841). However, preoperative deformity was significantly smaller in the PSI group (P=0.002).

RESULTS

Tibial implant positioning was similar between groups. In the coronal plane, the absolute deviation of the tibial implant from the intended alignment was 1.7±1.4° for the SRG and 1.6±1.2° for PSI (P=0.710). In the sagittal plane, the absolute alignment deviation of the tibial implant was 1.8±1.4° for the SRG and 1.9±1.5° for PSI (P=0.675). Operative time (167 vs 190min, P=0.040) and fluoroscopy time (85 vs 158s, P<0.001) were significantly decreased in the PSI group. The PSI preoperative plan report correctly predicted the implant size in 73% of cases for the tibial component and in 51% of cases for the talar component.

CONCLUSIONS

PSI provided similar tibial component alignment as standard instrumentation. Additionally, PSI preoperative plan reports were poor predictors of implant sizing. Therefore, the final decision should always be based on surgeon's experience in order to prevent errors in implant sizing and positioning.

LEVEL OF EVIDENCE

Level III, retrospective comparative study.

The Infinity Total Ankle System: Early Clinical Results With 2- to 4-Year Follow-up

AIMS

This study presents the first report of clinical and radiographic outcomes of the Infinity Total Ankle System (Wright Medical, Memphis, TN) with minimum 2-year follow-up.

PATIENTS AND METHODS

The first 67 consecutive patients who underwent primary total ankle arthroplasty (TAA) with the Infinity system at 2 North American sites between August 2013 and May 2015 were reviewed in a prospective, observational study. Demographic, radiographic, and functional outcome data were collected preoperatively, at 6 to 12 months postoperatively, and annually thereafter.

RESULTS

The overall implant survival rate was 97% (65 of 67 implants) at a mean follow-up of 35.4 months (27 to 47 months). Two cases underwent talar component revision for aseptic loosening. Six of the 67 cases (9%) required a nonrevision reoperation. Mean Foot Function Index and Ankle Osteoarthritis Scale scores at latest follow-up improved from preoperative by 21.6 ( P < .0001) and 34.0 ( P < .0001), respectively. No radiographic loosening of any talar or tibial components was identified in the 65 nonrevised cases.

CONCLUSION

Early clinical and radiographic outcomes with the Infinity TAA are promising and compare favorably to those reported for both fixed- and mobile-bearing third-generation TAA designs, even when used in cases with deformity and increased case complexity.

LEVELS OF EVIDENCE

Level IV.

Effects of Cryopreserved Amniotic Membrane-Umbilical Cord Allograft on Total Ankle Arthroplasty Wound Healing

Relatively high rates of wound healing complications continue to be reported with a total ankle arthroplasty (TAA) anterior incision. The amniotic membrane-umbilical cord (AM-UC) allograft is a regenerative orthobiologic adjunct that modulates wound healing by down-regulating inflammation, enhancing local healing and antimicrobial factors, and reducing scar formation. The purpose of this study was to determine whether local application of a cryopreserved AM-UC allograft enhances soft tissue healing after TAA. A total of 104 patients with symptomatic ankle arthritis who failed conservative management underwent standard TAA. At skin closure, patients were allocated to either the treatment (local application of AM-UC) or control (no allograft) group. Demographic data, patient comorbidities, and radiographic findings were collected. The primary outcome was a major complication necessitating reoperation. Secondary outcomes were time to healing, minor complications (i.e., skin dehiscence, local wound care, use of antibiotics), and patient scar assessment. Local application of an AM-UC allograft significantly decreased the overall time to skin healing (28.5 days vs 40 days; p = .03). Two patients required a reoperation for soft tissue wound complications, with no difference (p = 1.00) between the groups. No statistically significant difference was detected in terms of skin dehiscence, local wound care, or antibiotic prescriptions in the 2 groups. Regenerative technology using local application of a cryopreserved AM-UC allograft may enhance TAA outcomes by decreasing the time to healing. Larger randomized controlled trials are needed to determine whether an AM-UC allograft enhances soft tissue wound healing and ultimately reduces the incidence of devastating soft tissue complications.

[Progress of total ankle arthroplasty for end-stage ankle osteoarthritis]

Objective

To review the progress of total ankle arthroplasty (TAA) in treatment of end-stage ankle osteoarthritis (AOA).

Methods

The domestic and foreign literatures about TAA in recent years were reviewed. The current status and progress of TAA were summarized from the results of traditional and computer-assisted TAA clinical outcomes.

Results

End-stage AOA often leads to severe pain and dysfunction, and arthrodesis is still the main selective treatment option. In recent years, with the advancement of surgical techniques and prosthesis design, TAA which can remain joint mobility has increased gradually, and the surgical results also have significant progress. Accurate prosthesis implant and mechanical alignment restoration are critical factors for TAA, and surgery-related malalignment is correlative to the prosthesis failure. Computer assisted patient-specific guide can simplify the TAA procedures and obtain the accuracy of tibia and talus osteotomy.

Conclusion

The clinical efficiency of preoperative CT based patient-specific guide technology for TAA needs further clinical follow-up. Meanwhile, it is necessary to further develop intraoperative navigation and robotic surgery system suitable for TAA.

Short-Term Complications, Reoperations, and Radiographic Outcomes of a New Fixed-Bearing Total Ankle Arthroplasty

BACKGROUND

With the increasing use of total ankle arthroplasty (TAA), new implants with varied configurations are being developed every year. This study aimed to assess the early complications, reoperations, and radiographic and clinical outcomes of the Infinity TAA. To date, clinical results of this novel implant have not been published.

METHODS

A retrospective analysis of 64 consecutive ankles that underwent a primary Infinity TAA from July 2014 to April 2016 was performed. Patients had an average follow-up of 24.5 (range, 18-39) months. Medical records were reviewed to determine the incidence of complications, reoperations, and revisions. Radiographic outcomes included preoperative and postoperative tibiotalar alignment, tibial implant positioning, the presence of periprosthetic radiolucency and cysts, and evidence of subsidence or loosening. Additionally, patient-reported outcomes were analyzed with the Foot and Ankle Outcome Score (FAOS).

RESULTS

Survivorship of the implant was 95.3%. Fourteen ankles (21.8%) presented a total of 17 complications. A total of 12 reoperations were necessary in 11 ankles (17.1%). Revision surgery was indicated for 3 ankles (4.7%) as a result of subsidence of the implant. Tibiotalar coronal deformity was significantly improved after surgery ( P < .0001) and maintained during latest follow-up ( P = .81). Periprosthetic radiolucent lines were observed around the tibial component in 20 ankles (31%) and around the talar component in 2 ankles (3.1%). A tibial cyst was observed in 1 ankle (1.5%). Outcome scores were significantly improved for all FAOS components analyzed ( P < .0001), from 39.0 to 83.3 for pain, from 34.0 to 65.2 for symptoms, from 52.3 to 87.5 for activities of daily living, and from 15.7 to 64.2 for quality of life.

CONCLUSION

Most complications observed in the study were minor and successfully treated with a single reoperation procedure or nonoperatively. Failures and radiographic abnormalities were most commonly related to the tibial implant. Further studies with longer follow-up are needed to evaluate the survivorship of the tibial implant in the long term.

LEVEL OF EVIDENCE

Level IV, retrospective case series.

Perspectives in Treatments of End-Stage Ankle Arthritis Among Orthopaedic Surgeons

Background:

This study aimed to assess the preferred operative treatment for patients over the age of 60 with end-stage ankle arthritis and perspectives on total ankle replacement (TAR) among American Orthopaedic Foot & Ankle Society (AOFAS) members. Associated factors were analyzed for potential contraindications among members with different levels of experience.

Method:

A questionnaire containing 6 questions was designed and sent to 2056 members of the AOFAS. Responses were received from 467 orthopaedic surgeons practicing in the United States (76%), Canada (5%), and 26 other countries (20%). Participants were grouped for response comparisons according to country as well as experience level. Differences in contraindications were compared using χ2 tests or exact tests.

Results:

Respondents practicing in the United States and surgeons who perform 11 or more TARs per year tended to recommend operative treatments favoring TAR and displayed recognition of its increasing role ( P < .05). Overall, respondents felt that 41% of typical patients over 60 years old with end-stage arthritis would be best treated with TAR. Talus avascular necrosis, morbid obesity (body mass index >40 kg/m2), and poorly controlled diabetes with neuropathy were most recognized as the absolute contraindications to TAR. Surgeon’s experience affected the consideration of these clinical factors as contraindications.

Conclusions:

Total ankle replacement has a substantial and increasing role in the treatment of end-stage ankle arthritis in patients over the age of 60. Absolute and potential contraindications of the procedures were indicated from a cross-sectional survey of AOFAS members. Surgeons more experienced with total ankle replacement felt more comfortable employing it in a wider range of clinical settings.

Level of Evidence:

Level III, therapeutic.

Design Rationale for Total Ankle Arthroplasty Systems: An Update

The design of total ankle arthroplasty systems is evolving as a result of findings from longer-term studies. Our understanding of modes of failure has increased, and surgical techniques have become more refined. Currently, five total ankle arthroplasty systems are used in the United States. The landscape has changed considerably in the decade since the latest article reviewing total ankle design was published. Some implants with acceptable intermediate results had much poorer outcomes at 7- to 10-year follow-up. As more research showing mid- to long-term outcomes is published, the design rationale and current outcomes data for each of these implants must be considered.

Computed Navigation Guidance for Ankle Replacement in the Setting of Ankle Deformity

Total ankle replacement (TAR) has evolved over the past decade as a treatment for end-stage ankle arthritis with improved survivorship. Despite the improving outcomes, ankle deformity represents a challenge to the foot and ankle surgeon with increased risk of implant failure. The use of preoperative computer-assisted guidance has led to better understanding the 3-dimensional ankle anatomy and associated deformities and allows for reproducible, anatomic placement of the TAR components.