Location of Reentry Tears Affects False Lumen Thrombosis in Aortic Dissection Following TEVAR

Patient-Specific Haemodynamic Analysis of Virtual Grafting Strategies in Type-B Aortic Dissection: Impact of Compliance Mismatch

INTRODUCTION

Compliance mismatch between the aortic wall and Dacron Grafts is a clinical problem concerning aortic haemodynamics and morphological degeneration. The aortic stiffness introduced by grafts can lead to an increased left ventricular (LV) afterload. This study quantifies the impact of compliance mismatch by virtually testing different Type-B aortic dissection (TBAD) surgical grafting strategies in patient-specific, compliant computational fluid dynamics (CFD) simulations.

MATERIALS AND METHODS

A post-operative case of TBAD was segmented from computed tomography angiography data. Three virtual surgeries were generated using different grafts; two additional cases with compliant grafts were assessed. Compliant CFD simulations were performed using a patient-specific inlet flow rate and three-element Windkessel outlet boundary conditions informed by 2D-Flow MRI data. The wall compliance was calibrated using Cine-MRI images. Pressure, wall shear stress (WSS) indices and energy loss (EL) were computed.

RESULTS

Increased aortic stiffness and longer grafts increased aortic pressure and EL. Implementing a compliant graft matching the aortic compliance of the patient reduced the pulse pressure by 11% and EL by 4%. The endothelial cell activation potential (ECAP) differed the most within the aneurysm, where the maximum percentage difference between the reference case and the mid (MDA) and complete (CDA) descending aorta replacements increased by 16% and 20%, respectively.

CONCLUSION

This study suggests that by minimising graft length and matching its compliance to the native aorta whilst aligning with surgical requirements, the risk of LV hypertrophy may be reduced. This provides evidence that compliance-matching grafts may enhance patient outcomes.

The Role of Multiple Re-Entry Tears in Type B Aortic Dissection Progression: A Longitudinal Study Using a Controlled Swine Model

PURPOSE

False lumen (FL) expansion often occurs in type B aortic dissection (TBAD) and has been associated with the presence of re-entry tears. This longitudinal study aims to elucidate the role of re-entry tears in the progression of TBAD using a controlled swine model, by assessing aortic hemodynamics through combined imaging and computational modeling.

MATERIALS AND METHODS

A TBAD swine model with a primary entry tear at 7 cm distal to the left subclavian artery was created in a previous study. In the current study, reintervention was carried out in this swine model to induce 2 additional re-entry tears of approximately 5 mm in diameter. Computed tomography (CT) and 4-dimensional (4D) flow magnetic resonance imaging (MRI) scans were taken at multiple follow-ups before and after reintervention. Changes in aortic volume were measured on CT scans, and hemodynamic parameters were evaluated based on dynamic data acquired with 4D-flow MRI and computational fluid dynamics simulations incorporating all available in vivo data.

RESULTS

Morphological analysis showed FL growth of 20% following the initial TBAD-growth stabilized after the creation of additional tears and eventually FL volume reduced by 6%. Increasing the number of re-entry tears from 1 to 2 caused flow redistribution, with the percentage of true lumen (TL) flow increasing from 56% to 78%; altered local velocities; reduced wall shear stress surrounding the tears; and led to a reduction in FL pressure and pressure difference between the 2 lumina.

CONCLUSION

This study combined extensive in vivo imaging data with sophisticated computational methods to show that additional re-entry tears can alter dissection hemodynamics through redistribution of flow between the TL and FL. This helps to reduce FL pressure, which could potentially stabilize aortic growth and lead to reversal of FL expansion. This work provides a starting point for further study into the use of fenestration in controlling undesirable FL expansion.

CLINICAL IMPACT

Aortic growth and false lumen (FL) patency are associated with the presence of re-entry tears in type B aortic dissection (TBAD) patients. Guidelines on how to treat re-entry tears are lacking, especially with regards to the control and prevention of FL expansion. Through a combined imagining and computational hemodynamics study of a controlled swine model, we found that increasing the number of re-entry tears reduced FL pressure and cross lumen pressure difference, potentially stabilising aortic growth and leading to FL reduction. Our findings provide a starting point for further study into the use of fenestration in controlling undesirable FL expansion.

A numerical study of the effect of thrombus breakdown on predicted thrombus formation and growth

Thrombosis is a complex biological process which involves many biochemical reactions and is influenced by blood flow. Various computational models have been developed to simulate natural thrombosis in diseases such as aortic dissection (AD), and device-induced thrombosis in blood-contacting biomedical devices. While most hemodynamics-based models consider the role of low shear stress in the initiation and growth of thrombus, they often ignore the effect of thrombus breakdown induced by elevated shear stress. In this study, a new shear stress-induced thrombus breakdown function is proposed and implemented in our previously published thrombosis model. The performance of the refined model is assessed by quantitative comparison with experimental data on thrombus formation in a backward-facing step geometry, and qualitative comparison with in vivo data obtained from an AD patient. Our results show that incorporating thrombus breakdown improves accuracy in predicted thrombus volume and captures the same pattern of thrombus evolution as measured experimentally and in vivo. In the backward-facing step geometry, thrombus breakdown impedes growth over the step and downstream, allowing a stable thrombus to be reached more quickly. Moreover, the predicted thrombus volume, height and length are in better agreement with the experimental measurements compared to the original model which does not consider thrombus breakdown. In the patient-specific AD, the refined model outperforms the original model in predicting the extent and location of thrombosis. In conclusion, the effect of thrombus breakdown is not negligible and should be included in computational models of thrombosis.

Towards biomechanics-based pre-procedural planning for thoracic endovascular aortic repair of aortic dissection

BACKGROUND AND OBJECTIVE

Although thoracic aortic endovascular repair (TEVAR) has shown promising outcomes in the treatment of patients with complicated type B aortic dissection, complications still occur after TEVAR that can lead to catastrophic events. Biomechanical interactions between the stent-graft (SG) and the local aortic tissue play a critical role in determining the outcome of TEVAR. Different SG design may cause different biomechanical responses in the treated aorta, but such information is not known at the time of pre-procedural planning. By developing patient-specific virtual stent-graft deployment tools, it is possible to analyse and compare the biomechanical impact of different SGs on the local aorta for individual patients.

METHODS

A finite element based virtual SG deployment model was employed in this study. Computational simulations were performed on a patient-specific model of type B aortic dissection, accounting for details of the SG design and the hyperelastic behaviour of the aortic wall. Based on the geometry reconstructed from the pre-TEVAR CTA scan, the patient-specific aortic dissection model was created and pre-stressed. Parametric models of three different SG products (SG1, SG2 and SG3) were built with two different lengths for each design. The SG models incorporated different stent and graft materials, stent strut patterns, and assembly approaches. Using our validated SG deployment simulation framework, virtual trials were performed on the patient-specific aortic dissection model using different SG products and varying SG lengths.

CONCLUSION

Simulation results for different SG products suggest that SG3 with a longer length (SG3-long) would be the most appropriate device for the individual patient. Compared to SG1-short (the SG deployed in the patient), SG3-long followed the true lumen tortuosity closely, resulted in a more uniform true lumen expansion and a significant reduction in peak stress in the distal landing zone. These simulation results are promising and demonstrate the feasibility of using the virtual SG deployment model to assist clinicians in pre-procedural planning.

piRNA-823 is a novel potential therapeutic target in aortic dissection

Aortic dissection (AD) presents a medical challenge for clinicians. Here, to determine the role of a novel small non-coding piRNA-823 (piR-823) in AD, murine and human aorta from patients with AD were used. A high expression levels of piR-823 were found in patients with AD. Using performed loss- and gain-of-function assays in vitro and in vivo, we explore the regulatory effect of piR-823 on vascular smooth muscle cells (VSMCs) and AD. piR-823 obviously facilitates the proliferation, migration, and phenotypic transformation of VSMCs with or without nicotine treatment. piR-823 directly binds and suppresses histone deacetylase 1 (HDAC1) expression, and regulates the acetylation of histone 3 (H3) via H3K9ac and H3K27ac, eventually, VSMC functions and AD. To consolidate our findings, AD murine model was performed, and we observed that piR-823 antagomir strongly inhibited the pathogenesis of AD through regulating vascular remodeling. Thus, our study finds a potential target for the prevention and treatment strategy for nicotine-induced AD.

Risk evaluation of adverse aortic events in patients with non-circular aortic annulus after transcatheter aortic valve implantation: a numerical study

Transcatheter aortic valve implantation (TAVI) is a micro-invasive surgery used to treat patients with aortic stenosis (AS) efficiently. However, the uneven valve expansion can cause a non-circular annulus, which is one of the main factors leading to complications after TAVI. As a preliminary work, the main purpose of this study was to evaluate the risk of adverse aortic events in patients with a non-circular aortic annulus after TAVI. This study numerically investigated the distribution of four wall shear stress (WSS)-based indicators and three helicity-based indicators in eight patient-specific aortas with different annulus including circular, type I elliptical and type II elliptical shapes. Both elliptical annulus features can significantly enhance the intensity of the helicity (h2) in the ascending aorta (p < 0.001). However, for the type I elliptical annulus, the spiral flow structure was changed into low-velocity and disturbed flow pattern close to the inner side of the aortic arch. For the type II elliptical annulus, the spiral flow remained but became skewed in distribution. The elliptical annulus feature could increase the general level WSS-based indicators, especially in the ascending aorta. However, due to the disturbance of spiral flow or second helical flow in ascending aortas, areas with low TAWSS accompanied by high oscillatory shear index (OSI) and cross flow index (CFI) were observed in all the ascending aortas with non-circular annulus. The elliptical annulus feature can change the hemodynamic environment in the aortic arch, especially in the ascending aorta. Although both elliptical annulus features enhanced the strength of helicity, the uniform distribution of the helical flow was disturbed, especially in the ascending aorta, indicating the potential risk of adverse aortic events may increase. Therefore, for the patients without paravalvular leak but elliptical annulus shape after TAVI treatment, surgeons may be needed to consider further dilatation to make the non-circular annulus become circular.

Preoperative Predictors of Late Aortic Expansion in Acute Type B Aortic Dissection Treated with TEVAR

BACKGROUND

A patent false lumen (FL) in patients with thoracic endovascular aortic repair (TEVAR)-treated type B aortic dissection (TBAD) can cause a significant risk for late aortic expansion (LAE). We hypothesize that preoperative features can predict the occurrence of LAE.

METHODS

Sufficient preoperative and postoperative follow-up clinical and imaging feature data for patients treated with TEVAR in the First Affiliated Hospital of Nanjing Medical University from January 2018 to December 2020 were collected. A univariate analysis and multivariable logistic regression analysis were used to find potential risk factors of LAE.

RESULTS

Ninety-six patients were finally included in this study. The mean age was 54.5 ± 11.7 years and 85 (88.5%) were male. LAE occurred in 15 (15.6%) of 96 patients after TEVAR. Two preoperative factors showed strong associations with LAE according to the multivariable logistic regression analysis: preoperative partial thrombosis of the FL (OR = 10.989 [2.295-48.403]; p = 0.002) and the maximum descending aortic diameter (OR = 1.385 [1.100-1.743] per mm increase; p = 0.006).

CONCLUSIONS

Preoperative partial thrombosis of the FL and an increase in the maximum aortic diameter are strongly associated with late aortic expansion. Additional interventions of the FL may help to improve the prognosis of patients with the high risk of late aortic expansion.

Deep Learning Prediction for Distal Aortic Remodeling After Thoracic Endovascular Aortic Repair in Stanford Type B Aortic Dissection

PURPOSE

This study aimed to develop a deep learning model for predicting distal aortic remodeling after proximal thoracic endovascular aortic repair (TEVAR) in patients with Stanford type B aortic dissection (TBAD) using computed tomography angiography (CTA).

METHODS

A total of 147 patients with acute or subacute TBAD who underwent proximal TEVAR at a single center were retrospectively reviewed. The boundary of aorta was manually segmented, and the point clouds of each aorta were obtained. Prediction of negative aortic remodeling or reintervention was accomplished by a convolutional neural network (CNN) and a point cloud neural network (PC-NN), respectively. The discriminatory value of the established models was mainly evaluated by the area under the receiver operating characteristic curve (AUC) in the test set.

RESULTS

The mean follow-up time was 34.0 months (range: 12-108 months). During follow-up, a total of 25 (17.0%) patients were identified as having negative aortic remodeling, and 16 (10.9%) patients received reintervention. The AUC (0.876) by PC-NN for predicting negative aortic remodeling was superior to that obtained by CNN (0.612, p=0.034) and similar to the AUC by PC-NN combined with clinical features (0.884, p=0.92). As to reintervention, the AUC by PC-NN was significantly higher than that by CNN (0.805 vs 0.579; p=0.042), and AUCs by PC-NN combined with clinical features and PC-NN alone were comparable (0.836 vs 0.805; p=0.81).

CONCLUSION

The CTA-based deep learning algorithms may assist clinicians in automated prediction of distal aortic remodeling after TEVAR for acute or subacute TBAD.

CLINICAL IMPACT

Negative aortic remodeling is the leading cause of late reintervention after proximal thoracic endovascular aortic repair (TEVAR) for Stanford type B aortic dissection (TBAD), and possesses great challenge to endovascular repair. Early recognizing high-risk patients is of supreme importance for optimizing the follow-up interval and therapy strategy. Currently, clinicians predict the prognosis of these patients based on several imaging signs, which is subjective. The computed tomography angiography-based deep learning algorithms may incorporate abundant morphological information of aorta, provide with a definite and objective output value, and finally assist clinicians in automated prediction of distal aortic remodeling after TEVAR for acute or subacute TBAD.

Advanced risk prediction for aortic dissection patients using imaging-based computational flow analysis

Patients with either a repaired or medically managed aortic dissection have varying degrees of risk of developing late complications. High-risk patients would benefit from earlier intervention to improve their long-term survival. Currently serial imaging is used for risk stratification, which is not always reliable. On the other hand, understanding aortic haemodynamics within a dissection is essential to fully evaluate the disease and predict how it may progress. In recent decades, computational fluid dynamics (CFD) has been extensively applied to simulate complex haemodynamics within aortic diseases, and more recently, four-dimensional (4D)-flow magnetic resonance imaging (MRI) techniques have been developed for in vivo haemodynamic measurement. This paper presents a comprehensive review on the application of image-based CFD simulations and 4D-flow MRI analysis for risk prediction in aortic dissection. The key steps involved in patient-specific CFD analyses are demonstrated. Finally, we propose a workflow incorporating computational modelling for personalised assessment to aid in risk stratification and treatment decision-making.

Predicting the Risk of Type B Aortic Dissection Using Hemodynamic Parameters in Aortic Arches: A Comparative Study between Healthy and Repaired Aortas

BACKGROUND AND OBJECTIVE

The development of acute aortic dissection (AD) remains unpredictable due to the intricate nature of the AD mechanism and the varied patient-specific aortic anatomy. The aim of this study was to simulate the hemodynamic parameters in the aortas before the onset of TBAD with healthy controls.

METHODS

This study numerically assessed the effectiveness of hemodynamic indicators in predicting the risk of type B AD (TBAD) by investigating the differences in hemodynamic parameters between healthy and repaired aortas (aortas before TBAD development). Four wall shear stress (WSS)-based indicators and three helicity-based indicators were adopted and analyzed.

RESULTS

The results showed that more pathological anatomical feathers can be observed in the repaired aortas. For WSS-based indicators, only averaged cross flow index (CFI) and oscillatory shear index OSI (CFI, 1.03 ± 0.07 vs. 0.83 ± 0.10 and OSI, 0.12 ± 0.03 vs. 0.04 ± 0.02) (all p<0.001) were significantly higher in the repaired aortas than those in the healthy aortas. On the other hand, average helicity in the repaired aortas also showed a significant difference compared with that in healthy aortas (h1, 3.88 ± 5.55 vs. -8.03 ± 14.16) (p<0.05). Furthermore, the skewed helical structure and flow disturbance was found in the repaired aortas.

CONCLUSION

1) There are marked differences in pathological anatomical features, such as aortic dilation, elongation and tortuosity between the healthy aortas and repaired aortas, and the corresponding hemodynamic indicators also have also been significantly changed. 2) Compared with anatomical characteristics, hemodynamic indicators may be more accurate for predicting the risk and location of TBAD, such as the OSI and CFI index were significantly enhanced in the region where the entry tears have occurred. 3) In clinical practice, anatomical features remain important factors for assessing the risk for development of TBAD; however, hemodynamic analyses with quantitative data and more visualizing characteristics have showed promising potential in this aspect.

First insights into the role of wall shear stress in the development of a distal stent graft induced new entry through computational fluid dynamics simulations

Background

Distal stent graft induced new entry (dSINE) is an emerging complication after frozen elephant trunk (FET) procedure. The aim of this computational fluid dynamics (CFD) study was to investigate the role of wall shear stress (WSS) after the development of dSINE based on hemodynamic changes.

Methods

Aortic diameter and WSS of five patients who developed a dSINE after FET procedure were retrospectively analyzed before and after the occurrence of dSINE. Patient-specific 3-dimentional surface models of the aortic lumen were reconstructed from computed tomography angiographic datasets (pre dSINE: n=5, dSINE: n=5) to perform steady-state CFD simulations with laminar blood flow and zero pressure outlet conditions. WSS was calculated at the level of the stent graft (SG), the landing zone of the SG and at a location further distal to the SG, as well as on the outer and inner curvature of the aorta from SG center to its distal end.

Results

Post dSINE occurrence, median WSS increased significantly from 0.87 [interquartile range (IQR): 0.83-1.03] to 1.55 (IQR: 1.09-2.70) Pa, (P=0.043) within the SG and from 1.22 (IQR: 0.81-1.44) to 1.76 (IQR: 1.55-3.60) Pa, (P=0.043) at the landing zone of the SG. A non-significant increase from 1.22 (IQR: 0.59-3.50) to 2.58 (IQR: 1.16-3.78) Pa, (P=0.686) further downstream was observed. WSS at the outer curvature of the SG was significantly higher compared to WSS at the inner curvature for dSINE.

Conclusions

Adverse hemodynamic conditions in the form of elevated WSS consist inside and at the distal end of the SG as well as at the outer curvature of the aorta, which may contribute to weakening of the aortic wall. These new findings emphasize the relevance and potential of WSS in dSINE for additional adverse events, such as aortic rupture. Further prospective studies are warranted to explore if the combination of clinical parameters with WSS might be useful to decide which patients require an urgent reintervention in terms of a SG extension.

Morphological parameters affecting false lumen thrombosis following type B aortic dissection: a systematic study based on simulations of idealized models

Type B aortic dissection (TBAD) carries a high risk of complications, particularly with a partially thrombosed or patent false lumen (FL). Therefore, uncovering the risk factors leading to FL thrombosis is crucial to identify high-risk patients. Although studies have shown that morphological parameters of the dissected aorta are related to FL thrombosis, often conflicting results have been reported. We show that recent models of thrombus evolution in combination with sensitivity analysis methods can provide valuable insights into how combinations of morphological parameters affect the prospect of FL thrombosis. Based on clinical data, an idealized geometry of a TBAD is generated and parameterized. After implementing the thrombus model in computational fluid dynamics simulations, a global sensitivity analysis for selected morphological parameters is performed. We then introduce dimensionless morphological parameters to scale the results to individual patients. The sensitivity analysis demonstrates that the most sensitive parameters influencing FL thrombosis are the FL diameter and the size and location of intimal tears. A higher risk of partial thrombosis is observed when the FL diameter is larger than the true lumen diameter. Reducing the ratio of the distal to proximal tear size increases the risk of FL patency. In summary, these parameters play a dominant role in classifying morphologies into patent, partially thrombosed, and fully thrombosed FL. In this study, we point out the predictive role of morphological parameters for FL thrombosis in TBAD and show that the results are in good agreement with available clinical studies.

Shear-driven modelling of thrombus formation in type B aortic dissection

Background: Type B aortic dissection (TBAD) is a dangerous pathological condition with a high mortality rate. TBAD is initiated by an intimal tear that allows blood to flow between the aortic wall layers, causing them to separate. As a result, alongside the original aorta (true lumen), a false lumen (FL) develops. TBAD compromises the whole cardiovascular system, in the worst case resulting in complete aortic rupture. Clinical studies have shown that dilation and rupture of the FL are related to the failure of the FL to thrombose. Complete FL thrombosis has been found to improve the clinical outcomes of patients with chronic TBAD and is the desired outcome of any treatment. Partial FL thrombosis has been associated with late dissection-related deaths and the requirement for re-intervention, thus the level of FL thrombosis is dominant in classifying the risk of TBAD patients. Therefore, it is important to investigate and understand under which conditions complete thrombosis of the FL occurs.

Method: Local FL hemodynamics play an essential role in thrombus formation and growth. In this study, we developed a simplified phenomenological model to predict FL thrombosis in TBAD under physiological flow conditions. Based on an existing shear-driven thrombosis model, a comprehensive model reduction study was performed to improve computational efficiency. The reduced model has been implemented in Ansys CFX and applied to a TBAD case following thoracic endovascular aortic repair (TEVAR) to test the model. Predicted thrombus formation based on post-TEVAR geometry at 1-month was compared to actual thrombus formation observed on a 3-year follow-up CT scan.

Results: The predicted FL status is in excellent agreement with the 3-year follow-up scan, both in terms of thrombus location and total volume, thus validating the new model. The computational cost of the new model is significantly lower than the previous thrombus model, with an approximate 65% reduction in computational time. Such improvement means the new model is a significant step towards clinical applicability.

Conclusion: The thrombosis model developed in this study is accurate and efficient at predicting FL thrombosis based on patient-specific data, and may assist clinicians in choosing individualized treatments in the future.

Risk evaluation of type B aortic dissection based on WSS-based indicators distribution in different types of aortic arch

BACKGROUND AND OBJECTIVE

The underlying mechanism of aortic dissection (AD) remains unclear and the onset of AD is still unpredictable. Although clinical study with statistical analysis has reported that type III aortic arch may have strong correlation with type B AD (TBD), the effects of different arch types on the wall shear stress (WSS) have not been clarified.

METHODS

As a complementary work, this study numerically investigated the distribution of five WSS-based indicators in thirty aortic arches without AD, which were classified into three groups based on the arch types.

RESULTS

The distribution of most WSS indicators, such as time averaged WSS (TAWSS), oscillatory shear index (OSI) and relative residence time (RRT) had no significant difference among different types of aortic arches (P>0.05). However, a multidirectional WSS index, namely CFI, was found its maximum value was positively correlated with type III aortic arch in proximal descending aorta (p<0.001, r = 0.65).

CONCLUSIONS

It can be concluded that the enhancement or oscillation of WSS may not be the main reason of TBD is prevalence in type III arches, while the multidirectional WSS distribution may be an important factor. It can be further referred that the CFI may have a potential to predict the onset of TBD.

The Necessity to Seal the Re-Entry Tears of Aortic Dissection After TEVAR: A Hemodynamic Indicator

Thoracic endovascular aortic repair (TEVAR) is a common treatment for Stanford type B aortic dissection (TBAD). However, re-entry tears might be found distal to the stented region which transports blood between the true and false lumens. Sealing the re-entry tears, especially for the thoracic tears, could further reduce blood perfusion to the false lumen; however, it might also bring risks by re-intervention or surgery. Wise determination of the necessity to seal the re-entry tears is needed. In this study, patient-specific models of TBAD were reconstructed, and the modified models were established by virtually excluding the thoracic re-entries. Computational hemodynamics was investigated, and the variation of the functional index and first balance position (FBP) of the luminal pressure difference, due to the sealing of the re-entries, was reported. The results showed that the direction of the net flow through the unstented thoracic re-entries varied among cases. Excluding the re-entries with the net flow toward the false lumen may induce the FBP moving distally and the relative particle residence time increasing in the false lumen. This study preliminarily demonstrated that the hemodynamic status of the re-entry tears might serve as an indicator to the necessity of sealing. By quantifying the through-tear flow exchange and shift of FBP, one can predict the hemodynamic benefit by sealing the thoracic re-entries and thus wisely determine the necessity of further interventional management.

Imaging and Surveillance of Chronic Aortic Dissection: A Scientific Statement From the American Heart Association

All patients surviving an acute aortic dissection require continued lifelong surveillance of their diseased aorta. Late complications, driven predominantly by chronic false lumen degeneration and aneurysm formation, often require surgical, endovascular, or hybrid interventions to treat or prevent aortic rupture. Imaging plays a central role in the medical decision-making of patients with chronic aortic dissection. Accurate aortic diameter measurements and rigorous, systematic documentation of diameter changes over time with different imaging equipment and modalities pose a range of practical challenges in these complex patients. Currently, no guidelines or recommendations for imaging surveillance in patients with chronic aortic dissection exist. In this document, we present state-of-the-art imaging and measurement techniques for patients with chronic aortic dissection and clarify the need for standardized measurements and reporting for lifelong surveillance. We also examine the emerging role of imaging and computer simulations to predict aortic false lumen degeneration, remodeling, and biomechanical failure from morphological and hemodynamic features. These insights may improve risk stratification, individualize contemporary treatment options, and potentially aid in the conception of novel treatment strategies in the future.

An integrated fluid-structure interaction and thrombosis model for type B aortic dissection

False lumen thrombosis (FLT) in type B aortic dissection has been associated with the progression of dissection and treatment outcome. Existing computational models mostly assume rigid wall behavior which ignores the effect of flap motion on flow and thrombus formation within the FL. In this study, we have combined a fully coupled fluid–structure interaction (FSI) approach with a shear-driven thrombosis model described by a series of convection–diffusion reaction equations. The integrated FSI-thrombosis model has been applied to an idealized dissection geometry to investigate the interaction between vessel wall motion and growing thrombus. Our simulation results show that wall compliance and flap motion can influence the progression of FLT. The main difference between the rigid and FSI models is the continuous development of vortices near the tears caused by drastic flap motion up to 4.45 mm. Flap-induced high shear stress and shear rates around tears help to transport activated platelets further to the neighboring region, thus speeding up thrombus formation during the accelerated phase in the FSI models. Reducing flap mobility by increasing the Young’s modulus of the flap slows down the thrombus growth. Compared to the rigid model, the predicted thrombus volume is 25% larger using the FSI-thrombosis model with a relatively mobile flap. Furthermore, our FSI-thrombosis model can capture the gradual effect of thrombus growth on the flow field, leading to flow obstruction in the FL, increased blood viscosity and reduced flap motion. This model is a step closer toward simulating realistic thrombus growth in aortic dissection, by taking into account the effect of intimal flap and vessel wall motion.

Evaluation and verification of patient-specific modelling of type B aortic dissection

Quantitative assessment of the complex hemodynamic environment in type B aortic dissection (TBAD) through computational fluid dynamics (CFD) simulations can provide detailed insights into the disease and its progression. As imaging and computational technologies have advanced, methodologies have been developed to increase the accuracy and physiological relevance of CFD simulations. This study presents a patient-specific workflow to simulate blood flow in TBAD, utilising the maximum amount of in vivo data available in the form of CT images, 4D-flow MRI and invasive Doppler-wire pressure measurements, to implement the recommended current best practice methodologies in terms of patient-specific geometry and boundary conditions. The study aimed to evaluate and verify this workflow through detailed qualitative and quantitative comparisons of the CFD and in vivo data. Based on data acquired from five TBAD patients, a range of essential model inputs was obtained, including inlet flow waveforms and 3-element Windkessel model parameters, which can be utilised in further studies where in vivo flow data is not available. Local and global analysis showed good consistency between CFD results and 4D-MRI data, with the maximum velocity in the primary entry tear differing by up to 0.3 m/s, and 80% of the analysed regions achieving moderate or strong correlations between the predicted and in vivo velocities. CFD predicted pressures were generally well matched to the Doppler-wire measurements, with some deviation in peak systolic values. Overall, this study presents a validated comprehensive workflow with extensive data for CFD simulation of TBAD.

Influence of Distal Re-entry Tears on False Lumen Thrombosis After Thoracic Endovascular Aortic Repair in Type B Aortic Dissection Patients: A Computational Fluid Dynamics Simulation

PURPOSE

Distal re-entry tears play a significant role in false lumen (FL) thrombosis, which will strongly affect the postoperative long-term survival of patients with type B aortic dissection (TBAD) after thoracic endovascular aortic repair (TEVAR). This study aimed to investigate the influence of a peculiar morphological parameter of the residual re-entry tears in TBAD patients after TEVAR on long-term FL thrombosis using the computational fluid dynamics.

METHODS

Ideal population-based three-dimensional models of post-operative TBAD were established. Numerical simulation was performed to investigate the hemodynamic differences caused by different tear features, including the tear count, the maximum distance between tears, and the tear area.

RESULTS

Although the low relative residence time (RRT) area did not change significantly when the tear distance was fixed, the area of oscillatory shear index (OSI) > 0.45 and endothelial cell activation potential (ECAP) > 1.5 decreased significantly with the tear count and area increased and a dramatic increase in blood flow into the FL was also observed. When tear count and total area were fixed, for each 10-mm increase in the maximum distance between tears, the area of low RRT in the FL increased significantly, while the average pressure difference increased by 10.85%.

CONCLUSION

The different morphology of the re-entry tears had different effects on the thrombosis-related hemodynamic parameters in FL following TEVAR. and the number of re-entry tears was most crucial to the potential thrombosis in the post-TEVAR FL of TBAD patients.