Does vascular stapling improve compliance of vascular anastomoses?

The Symmetrytrade mark devices for proximal and distal anastomoses in coronary surgery

Recent developments in minimally invasive coronary artery surgery have been driven by the introduction of new technologies which should facilitate precise surgical maneuvers on the beating heart within confined spaces. Such technologies include coronary stabilizer systems, cardiac positioning vacuum-assisted devices and, to some extent, telemanipulative systems. Despite these developments, standard suturing techniques using running polypropylene material remain a limiting factor in the surgeon's ability to perform complete revascularization with high quality anastomoses through minimal approaches to the chest cavity. Clinical validation of proximal and distal anastomotic devices has the potential to substantially improve and perhaps revolutionize minimally invasive coronary surgery. Ideal characteristics of such devices would include applicability to all conduit types, all coronary sizes, interchangeable proximal/distal sequencing of the anastomosis and safe bail out for device malfunction. However there is an urgent need to define the performance objectives of such systems as well as the general criteria for proper and comparable evaluation and validation of different systems in animal models and subsequently in controlled prospective clinical studies. In this review, we present different generations of the Symmetrytrade mark devices (ATG, St Jude Medical, St. Paul, MN) for proximal and distal coronary anastomoses.

Vein and artery growth after anastomosis with vascular closure staple clips vs interrupted polypropylene suture: application in pediatric vascular surgery

BACKGROUND/PURPOSE

Alternatives are still being sought in vascular surgery to address the problem of arrested growth after anastomosis in growing vessels, and opinions differ widely regarding the most suitable technique. This study compared vascular growth and permeability after anastomosis using the latest-generation vascular closure staple (VCS) system and the conventional suture technique to ascertain which approach yielded better results.

METHODS

Thirty 55-day-old lambs underwent end-to-end anastomosis of the carotid artery and jugular vein. Serial ultrasonography and angiography were carried out over the ensuing 6-month growth period, after which lambs were euthanized.

RESULTS

Both VCS clips and polypropylene suture allowed longitudinal and transverse vessel growth; however, longitudinal growth was significantly greater in clip-closed vessels than in either sutured or untreated vessels.

CONCLUSIONS

The results obtained for vascular growth and permeability suggest that VCS clips may provide a suitable alternative to conventional suture in pediatric vascular surgery.

Randomized clinical trial of continuous sutures or non-penetrating clips for radiocephalic arteriovenous fistula

Background

Despite several modifications to the original design, patency rates of radiocephalic arteriovenous fistulas have changed little since the first report in 1966. The use of non-penetrating clips for vascular anastomosis on the outcome of such fistulas was studied.

Methods

Between January 2000 and August 2003, 107 primary radiocephalic fistulas were constructed in 98 patients. The vascular anastomoses were performed at random with either sutures (n = 56) or clips (n = 51).

Results

Although there were trends for better primary and primary assisted patency of clipped fistulas, the differences were not statistically significant. The 6-month primary patency rate was 61 per cent with sutures and 69 per cent with clips (P = 0·393). The mean(s.d.) primary patency was 315(306) and 285(285) days for clipped and sutured fistulas respectively. With regard to secondary patency, clipped fistulas were better (P = 0·009). The mean(s.d.) secondary patency was 435(376) and 344(316) days for clipped and sutured fistulas, respectively. There were no significant differences in flow characteristics, number of revisions or other morbidity.

Conclusion

This randomized clinical trial provided further evidence that the use of vascular clips may improve the patency rate of radiocephalic arteriovenous fistulas for haemodialysis.

Five years' world experience with nonpenetrating clips for vascular anastomoses

BACKGROUND

A new sutureless technique has been introduced clinically to facilitate the process of vascular reconstruction and improve patency. The Vessel Closure System (VCS) is nonpenetrating, creates an elastomeric everted anastomosis, and is easily and reproducibly applied. The objective of this report is to review the published world experience that has accrued regarding these clips with attention to the assets, liabilities, and pitfalls associated with the new technology.

DATA SOURCES

Medline search and manual cross-referencing were performed, after which 61 original articles were identified on the use of VCS clips for vascular anastomoses.

RESULTS

Advantages of the clips compared with sutures include the technical ease of application, the reduced anastomotic time, the superior hemodynamics, and the improved healing pattern of the anastomosis. Disadvantages include the potential problems in atherosclerotic vessels, lack of prospective randomized long-term follow-up, and initial costs. The best clinical results have been achieved in microvascular repair, as well as with vascular access and transplantation surgery.

CONCLUSIONS

The VCS clip technology has become an accepted vascular anastomosing technique, which in future could lead to the use of clips as a standard approach and the use of sutures only in case of severe atherosclerosis and other circumstances in which vessel edges are difficult to evert.

Clinical and angiographic results after mechanical connection for distal anastomosis in coronary surgery

BACKGROUND

Sutureless anastomotic devices are of increasing interest in cardiovascular surgery. We investigated the stainless steel clip system of St Jude Medical/Anastomotic Technology Group (Maple Grove, Minn) to connect saphenous vein grafts with coronary arteries.

METHODS

Forty-five patients were enrolled in this feasibility study performed on patients who had on-pump coronary artery bypass grafting, but 32 patients only received 1 distal anastomosis with this investigational device (2.5 mm [n = 14] and 2.0 mm [n = 18]). Thirteen were excluded because target vessels were too small, calcified, or tortuous. The system consists of an expandable clip mounted on a balloon catheter; delivery is obtained during balloon inflation. The main differences between the 2.5-mm and 2.0-mm devices are different loading and deployment in smaller coronary arteries for the 2.0-mm device.

RESULTS

A connecting device was deployed on the right coronary artery in 14 patients, the posterior descending branch in 12 patients, the obtuse marginal in 5 patients, and the posterolateral branch in 1 patient. Perfect hemostasis of the sutureless connector anastomosis was obtained in 28 patients. Three connectors were removed because of minor leakage at the connection site, and 1 connector was removed because of mismanipulation after successful deployment. Hand-sewn anastomosis was performed at the same arteriotomy site. Intraoperative flow was assessed by the transit time method and averaged 71 +/- 24 mL/min. One patient died of neurologic injury; the connector was patent at autopsy. One patient had a perioperative myocardial infarction. There was no adverse cardiac event in the remaining patients. All patients underwent clinical follow-up after 6 and 12 months and 35 angiograms were available in 21 patients: after 3 and 6 months, 17 anastomoses were patent and the saphenous vein graft was occluded in 4 patients.

CONCLUSIONS

The coronary connector system from St Jude Medical/Anastomotic Technology Group allows consistently uniform sutureless connection between the saphenous vein graft and coronary artery. Loading and deployment require careful training. This technology is under constant development and may give a significant boost to less invasive coronary revascularization techniques.

Clinical experience with devices for facilitated anastomoses in coronary artery bypass surgery

Recent developments in minimally invasive coronary artery surgery have been driven by the introduction of new technologies which should facilitate precise surgical maneuvers on the beating heart within confined spaces. Such technologies include coronary stabilizer systems, cardiac positioning vacuum-assisted devices, and telemanipulative systems. Despite these developments, standard suturing techniques using running polypropylene material remains a limiting factor in the surgeon's ability to perform complete revascularization with high quality anastomoses through minimal approaches to the chest cavity. Clinical validation of proximal and distal anastomotic devices has the potential to substantially improve and perhaps revolutionize minimally invasive coronary surgery. Ideal characteristics of such devices would include applicability to all conduit types, all coronary sizes, interchangeable proximal/distal sequencing of the anastomosis, and safe bail out for device malfunction. However there is an urgent need to define the performance objectives of such systems as well as the general criteria for proper and comparable evaluation and validation of different systems in animal models and subsequently in controlled prospective clinical studies. This review summarizes the most interesting systems available in both experimental and clinical settings.

Rotational in vitro compliance measurement of diverse anastomotic configurations: a tool for anastomotic engineering

Anastomotic configurations with a small internal diameter are prone to intimal hyperplasia which can cause occlusion within weeks or months. A link between intimal hyperplasia and inhomogenities of the elastic profile of the anastomosis has been established, making anastomotic engineering directed towards smoothing the compliance profile at the anastomotic site essential. Methods to date restrict the anastomotic compliance measurement to one plane. We present a method by which the anastomotic configurations are rotated, thereby allowing an anastomotic elastic profile assessment in multiple planes. Eight end-to-end anastomoses (ovine common carotid artery) and three end-to-side anastomoses (e-PTFE graft to ovine common carotid artery) were prepared and mounted in an artificial circulation system. Anastomotic circumferential compliance (maximal-minimal diameter/(maximal-minimal pressure.minimal diameter)) was measured by means of a laser-scan-micrometer and a Statham pressure transducer. By rotating end-to-end anastomoses, the compliance was measured in three, and in end-to-side anastomoses in four different planes. Multiplanar compliance variability in areas remote to both end-to-end and end-to-side anastomoses was approximately 9%. At the suture line the variability was approximately 22% in end-to-end anastomoses and 78% in end-to-side anastomoses. These results show that local factors result in different compliance profiles when utilizing a multiplanar technique, particularly in end-to-side anastomoses. The rotational apparatus is a tool which can be used to more accurately engineer a homogeneously compliant anastomosis, with the ultimate goal of prolonging anastomotic patency.

A multicenter study of permanent hemodialysis access patency: beneficial effect of clipped vascular anastomotic technique

OBJECTIVE

There is an urgent and compelling need to reduce the morbidity and expense of maintaining hemodialysis vascular access patency. This large, long-term, retrospective, multicenter study, which compared access patency of autogenous arteriovenous fistulas (AVF) and synthetic bridge grafts (AVG) created with conventional sutures or nonpenetrating clips, was undertaken to resolve conflicting results from previous smaller studies.

DESIGN

Patency data for 1385 vascular access anastomoses (clipped or sutured) was obtained from 17 hospitals and dialysis centers (Appendix). Five hundred eighteen AVF (242 clip, 276 suture) and 827 AVG (440 clip, 384 suture) were analyzed. Statistical comparisons were made with Kaplan-Meier survival analysis, log-rank test, two-sample t test, and X(2) test. The Cox proportional hazards model was used to confirm Kaplan-Meier analysis.

RESULTS

Access patency (primary, secondary, overall, and intention to treat) was significantly improved in access anastomoses constructed with clips. In the intention-to-treat group, primary patency at 24 months was 0.54 for clipped AVF and 0.34 for sutured AVF, and was 0.36 for clipped AVG and 0.17 for sutured AVG. At 24 months, primary patency rate for AVF successfully used for dialysis was 0.67 for clips and 0.48 for sutures, and for AVG was 0.39 for clips and 0.19 for sutured constructs. Interventions necessary to maintain patency were significantly fewer in clipped anastomoses.

CONCLUSION

Replacing conventional suture with clips significantly reduces morbidity associated with maintaining permanent hemodialysis vascular access. This beneficial effect may be due to the biologic superiority of interrupted, nonpenetrating vascular anastomoses.

Compliance in Anastomoses With and Without Vein Cuff Interposition

OBJECTIVE

to compare anastomotic compliance in end-to-side anastomoses with and without vein cuff interposition. Materials polytetrafluoroethylene graft to bovine carotid artery without (standard) and with vein interposition (Linton-patch and Miller-cuff).

METHODS

zonewise compliance measurement of end-to-side anastomoses in an in-vitro circulation system. The zone most distal to the suture-line served as reference compliance.

RESULTS

directly distal to the suture-line the compliance of the Linton-patch (5.6+/-1.6%/100 mmHg) and Miller-cuff anastomosis (5.2+/-1.1%/100 mmHg) more closely approached reference compliance (standard: 5.0+/-1.2, Linton-patch: 4.5+/-1.5, Miller-cuff: 4.9+/-1.0%/100 mmHg) than that of the standard anastomosis (7.9+/-3.0%/100 mmHg). The maximal compliance values of the Linton-patch (9.5+/-2.3%/100 mmHg) and Miller-cuff anastomoses (9.8+/-2.7%/100 mmHg) were significantly higher than that of the standard end-to-side anastomosis (7.9+/-3.0%/100 mmHg). However, maximal compliance was shifted from the zone directly distal to the suture line in the standard end-to-side anastomosis, to the vein cuff interposition in the Linton-patch and Miller-cuff anastomoses.

CONCLUSION

the shift in maximal compliance to the wider portion of the anastomosis in the Miller-cuff and Linton-patch anastomoses may obviate reocclusion.