Antibacterial Titanium Plate Anodized by being Discharged in NaCl Solution Exhibits Cell Compatibility

Micro/nano hierarchical structured titanium treated by NH4OH/H2O2 for enhancing cell response

In this paper, two kinds of titanium surfaces with novel micro/nano hierarchical structures, namely Etched (E) surface and Sandblast and etched (SE) surface, were successfully fabricated by NH4OH and H2O2 mixture. And their cellular responses of MG63 were investigated compared with Sandblast and acid-etching (SLA) surface. Scanning electron microscope (SEM), Surface profiler, X-ray photoelectron spectroscopy (XPS), and Contact angle instrument were employed to assess the surface morphologies, roughness, chemistry and wettability respectively. Hierarchical structures with micro holes of 10-30 μm in diameter and nano pits of tens of nanometers in diameter formed on both E and SE surfaces. The size of micro holes is very close to osteoblast cell, which makes them wonderful beds for osteoblast. Moreover, these two kinds of surfaces possess similar roughness and superior hydrophilicity to SLA. Reactive oxygen species were detected on E and SE surface, and thus considerable antimicrobial performance and well fixation can be speculated on them. The cell experiments also demonstrated a boost in cell attachment, and that proliferation and osteogenic differentiation were achieved on them, especially on SE surface. The results indicate that the treatment of pure titanium with H2O2/NH4OH is an effective technique to improve the initial stability of implants and enhance the osseointegration, which may be a promising surface treatment to titanium implant.

Impact of surface topography and coating on osteogenesis and bacterial attachment on titanium implants

Titanium (Ti) plays a predominant role as the material of choice in orthopaedic and dental implants. Despite the majority of Ti implants having long-term success, premature failure due to unsuccessful osseointegration leading to aseptic loosening is still too common. Recently, surface topography modification and biological/non-biological coatings have been integrated into orthopaedic/dental implants in order to mimic the surrounding biological environment as well as reduce the inflammation/infection that may occur. In this review, we summarize the impact of various Ti coatings on cell behaviour both in vivo and in vitro. First, we focus on the Ti surface properties and their effects on osteogenesis and then on bacterial adhesion and viability. We conclude from the current literature that surface modification of Ti implants can be generated that offer both osteoinductive and antimicrobial properties.

Histomorphometric and histologic evaluation of titanium-zirconium (aTiZr) implants with anodized surfaces

The choice of implant surface has a significant influence on osseointegration. Modification of TiZr surface by anodization is reported to have the potential to modulate the osteoblast cell behaviour favouring more rapid bone formation. The aim of this study is to investigate the effect of anodizing the surface of TiZr discs with respect to osseointegration after four weeks implantation in sheep femurs. Titanium (Ti) and TiZr discs were anodized in an electrolyte containing DL-α-glycerophosphate and calcium acetate at 300 V. The surface characteristics were analyzed by scanning electron microscopy, electron dispersive spectroscopy, atomic force microscopy and goniometry. Forty implant discs with thickness of 1.5 and 10 mm diameter (10 of each-titanium, titanium-zirconium, anodized titanium and anodized titanium-zirconium) were placed in the femoral condyles of 10 sheep. Histomorphometric and histologic analysis were performed 4 weeks after implantation. The anodized implants displayed hydrophilic, porous, nano-to-micrometer scale roughened surfaces. Energy dispersive spectroscopy analysis revealed calcium and phosphorous incorporation into the surface of both titanium and titanium-zirconium after anodization. Histologically there was new bone apposition on all implanted discs, slightly more pronounced on anodised discs. The percentage bone-to-implant contact measurements of anodized implants were higher than machined/unmodified implants but there was no significant difference between the two groups with anodized surfaces (P > 0.05, n = 10). The present histomorphometric and histological findings confirm that surface modification of titanium-zirconium by anodization is similar to anodised titanium enhances early osseointegration compared to machined implant surfaces.

Spark anodization of titanium-zirconium alloy: surface characterization and bioactivity assessment

Titanium (Ti) and its alloys have been popularly used as implant biomaterial for decades. Recently, titanium-zirconium (TiZr) alloy has been developed as an alternative implant material with improved strength in load bearing areas. Surface modification is one of the key factors to alter the surface properties to hasten osseointegration. Spark anodic oxidation (anodization) is one such method that is reported to enhance the bone formation around implants. This study aims to anodize TiZr and study its surface characteristics and cytocompatibility by cell culture experiments using osteoblast-like cells. Titanium (Ti) and TiZr discs were anodized in an electrolyte containing DL-α-glycerophosphate and calcium acetate (CA) at 300 V. The surface characteristics were analyzed by scanning electron microscopy, electron dispersive spectroscopy, X-ray diffraction (XRD), atomic force microscopy and goniometry. Using osteoblast-like cells viability, proliferation, differentiation and mineralization was assessed. The anodized surfaces demonstrated increased oxygen, entrapped calcium and phosphorous from the electrolyte used. XRD analysis confirmed the presence of anatase in the oxide layer. Average roughness increased and there was a significant decrease in contact angle (P < 0.01) following anodization. The anodized TiZr (aTiZr) surfaces were more nano-porous compared to anodized Ti (aTi). No significant difference was found in the viability of cells, but after 24 h the total number of cells was significantly higher (P < 0.01). Proliferation, alkaline phosphatase activity and calcium deposits were significantly higher on anodized surfaces compared to machined surfaces (P < 0.05, ANOVA). Anodization of TiZr resulted in a more nanoporous and hydrophilic surface than aTi, and osteoblast biocompatibility appeared comparable to aTi.

Increased reactivity and in vitro cell response of titanium based implant surfaces after anodic oxidation

In the quest for improved bone growth and attachment around dental implants, chemical surface modifications are one possibility for future developments. The biological properties of titanium based materials can be further enhanced with methods like anodic polarization to produce an active rather than a passive titanium oxide surface. Here we investigate the formation of hydroxide groups on sand blasted and acid etched titanium and titanium-zirconium alloy surfaces after anodic polarization in an alkaline solution. X-ray photoelectron spectroscopy shows that the activated surfaces had increased reactivity. Furthermore the activated surfaces show up to threefold increase in OH(-) concentration in comparison to the original surface. The surface parameters Sa, Sku, Sdr and Ssk were more closely correlated to time and current density for titanium than for titanium-zirconium. Studies with MC3T3-E1 osteoblastic cells showed that OH(-) activated surfaces increased mRNA levels of osteocalcin and collagen-I.

Antibacterial effect and cytocompatibility of nano-structured TiO2 film containing Cl

The aim of this study was to investigate the antibacterial effect and cytocompatibility of a nano-structured TiO2 film that contained Cl and had been coated onto commercially pure titanium. First, we prepared nano-structured TiO2 by anodization with hydrofluoric acid. Then, to confer an antibacterial effect, we performed a second anodization with NaCl solutions of different concentrations (0.5 M, 1 M, 2 M). The morphology, composition, and wettability of the surface were investigated by SEM, EDS, and a video contact angle measuring system. The antibacterial effect was evaluated by film adhesion method. And cytotoxicity was determined by the viability of MG-63 cells in a MTT assay. The SEM and EDS results showed that the TiO2 nano-structure containing Cl had successfully formed after the second anodization. The contact angle analysis showed that the anodized titanium had a hydrophilic character. The results of this in vitro investigation demonstrated that the TiO2 nano-structure film anodized in 1 M NaCl had an antibacterial effect and good cell compatibility.

Role of Chloride Formed on Anodized Titanium Surfaces Against an Oral Microorganism

A modified titanium surface, anodized after being discharged in electrolytes, provides antibacterial activity against oral bacteria as well as osteoconductivity. However, the mechanism of this antibacterial effect against oral bacteria is still unclear. This study aims to investigate whether it is the chloride or the hydrophilicity properties of the anodized titanium, which is effective against the oral bacteria. Titanium plates are anodized in various electrolytes with or without chloride and are characterized. Then the survival of Streptococcus mutans on each specimen is evaluated. The results demonstrate that the peroxidation effects of HClO generated from the TiCl3 formed on the titanium surface anodized in various chloride solutions efficiently killed adherent S. mutans on the surface whereas the presence of hydrophilicity alone do not demonstrate antibacterial activity. This method of anodizing titanium surface in a chloride solution may provide a novel strategy for use in orthopedic or dental implant systems.

Micro-organism and Cell Viability on Antimicrobially Modified Titanium

When titanium is anodized by discharge in NaCl solution, both antimicrobial activity and osteoconductivity are conferred. The viability of adherent micro-organisms and cells on antimicrobial titanium remains uncertain. We hypothesized that a thin peroxidation barrier would efficiently destroy adherent bacteria, whereas adherent osteoblastic cells would be viable, since these cells adhere to the surface indirectly though serum proteins. The efficacy of antimicrobial titanium appears to be based on peroxidation, since peroxidation products were detected in parallel with the destruction of bacterial cell-surface structures. The peroxidation effect of antimicrobial titanium was confined to the surface within narrow limits. The viability of osteoblastic cells on the surface was strongly dependent on the presence of serum protein, whereas that of adherent Streptococcus mutans was not affected by the presence of serum proteins. Therefore, differences in the adherent systems used by bacteria and osteoblastic cells are important determinants of their viability on antimicrobial titanium.

Exploring Antibacterial and Antiadhesive Activities of Titanium Surface Modified with Hydroxyapatite Sol-Gel Containing Silver

Circumambient tissues infection is a common complication of implanted percutaneous and permucosal devices (PDs). In order to counter the infection, the titanium abutment surface of PDs was modified to achieve antibacterial and antiadhesive activities. Titanium discs were immersed into hydroxyapatite (HA) sol containing different mass fraction silver and thermally treated to get modified discs. The modified discs become more smoother and get crystal HA coatings containing silver. Silver ion release test demonstrate the release rate is very slow and the coating is a reservoir of silver. The antibacterial and antiadhesive effects of modified discs on Staphylococcus aureus and Porphyromonas gingivalis were evaluated. Modified titanium discs with silver significantly inhibited the growth of these two bacteria compared with both the polished titanium discs control and modified titanium discs without silver. And titanium discs modified with more silver have higher antibacterial activity and less bacteria adhesion in this study. These findings indicate that titanium surface modified with the HA sol-gel containing silver could achieve antibacterial and antiadhesive activities, and the abutments of PDs are promising to be modified by this method.

Decreased bacterial adhesion to surface-treated titanium

Osteointegrative dental implants are widely used in implantology for their well-known excellent performance once implanted in the host. Remarkable bacterial colonization along the transgingival region may result in a progressive loss of adhesion at gum-implant interface and an increase of the bone area exposed to pathogens. This phenomenon may negatively effect the osteointegration process and cause, in the most severe cases, implant failure. The presence of bacteria at implant site affect the growth of new bone tissue and consequently, the achievement of a mechanically stable bone-implant interface, key parameters for a suitable implant osteointegration. In the present work, a novel surface treatment has been developed and optimized in order to convert the amorphous titanium oxide in a crystalline layer enriched in anatase capable of providing not only antibacterial properties but also of stimulating the precipitation of apatite when placed in simulated body fluid. The collected data have shown that the tested treatment results in a crystalline anatase-type titanium oxide layer able to provide a remarkable decrease in bacterial attachment without negatively effecting cell metabolic activity. In conclusion, the surface modification treatment analyzed in the present study might be an elegant way to reduce the risk of bacterial adhesion and increase the lifetime of the transgingival component in the osteointegrated dental implant.

Anode glow discharge plasma treatment of titanium plates facilitates adsorption of extracellular matrix proteins to the plates

Glow discharge plasma (GDP) supplied to an anode (GDP+) promotes calcium phosphate adsorption onto titanium better than that supplied to a cathode (GDP-). However, the adsorption of extracellular matrix (ECM) proteins is crucial for cell adhesion to titanium. Since GDP+ induced both inorganic adsorption and cell adhesion, we hypothesized that the inorganic adsorption in a culture medium might affect the adsorption of the ECM proteins. In this study, ECM proteins adsorbed on titanium with and without GDP were examined by x-ray photoelectron spectroscopy. After 1 hr of incubation, increasing sodium adsorption on GDP+ specimens induced adsorption of ECM proteins as shown by NH(+) and COO(-) signals without calcium adsorption. In contrast, since no specific adsorption of sodium on GDP-specimens was detected, GDP-did not contribute to the adsorption of ECM proteins. Thus, promotion of sodium adsorption of GDP+ was effective, at least in the initial ECM protein adsorption on a titanium surface.