Comparison of Multimaterial Decomposition Fat Fraction with DECT and Proton Density Fat Fraction with IDEAL IQ MRI for Quantification of Liver Steatosis in a Population Exposed to Chemotherapy

Diagnostic Accuracy of CT for the Detection of Hepatic Steatosis: A Systematic Review and Meta-Analysis

Background CT plays an important role in the opportunistic identification of hepatic steatosis. CT performance for steatosis detection has been inconsistent across various studies, and no clear guidelines on optimum thresholds have been established. Purpose To conduct a systematic review and meta-analysis to assess CT diagnostic accuracy in hepatic steatosis detection and to determine reliable cutoffs for the commonly mentioned measures in the literature. Materials and Methods A systematic search of the PubMed, Embase, and Scopus databases (English-language studies published from September 1977 to January 2024) was performed. Studies evaluating the diagnostic accuracy of noncontrast CT (NCCT), contrast-enhanced (CECT), and dual-energy CT (DECT) for hepatic steatosis detection were included. Reference standards included biopsy, MRI proton density fat fraction (PDFF), or NCCT. In several CECT and DECT studies, NCCT was used as the reference standard, necessitating subgroup analysis. Statistical analysis included a random-effects meta-analysis, assessment of heterogeneity with use of the I2 statistic, and meta-regression to explore potential sources of heterogeneity. When available, mean liver attenuation, liver-spleen attenuation difference, liver to spleen attenuation ratio, and the DECT-derived fat fraction for hepatic steatosis diagnosis were assessed. Results Forty-two studies (14 186 participants) were included. NCCT had a sensitivity and specificity of 72% and 88%, respectively, for steatosis (>5% fat at biopsy) detection and 82% and 94% for at least moderate steatosis (over 20%-33% fat at biopsy) detection. CECT had a sensitivity and specificity of 66% and 90% for steatosis detection and 68% and 93% for at least moderate steatosis detection. DECT had a sensitivity and specificity of 85% and 88% for steatosis detection. In the subgroup analysis, the sensitivity and specificity for detecting steatosis were 80% and 99% for CECT and 84% and 93% for DECT. There was heterogeneity among studies focusing on CECT and DECT. Liver attenuation less than 40-45 HU, liver-spleen attenuation difference less than -5 to 0 HU, and liver to spleen attenuation ratio less than 0.9-1 achieved high specificity for detection of at least moderate steatosis. Conclusion NCCT showed high performance for detection of at least moderate steatosis. © RSNA, 2024 Supplemental material is available for this article.

Hepatic fat quantification in dual-layer computed tomography using a three-material decomposition algorithm

OBJECTIVES

The purpose of this study was to evaluate a three-material decomposition algorithm for hepatic fat quantification using a dual-layer computed tomography (DL-CT) and MRI as reference standard on a large patient cohort.

METHOD

A total of 104 patients were retrospectively included in our study, i.e., each patient had an MRI exam and a DL-CT exam in our institution within a maximum of 31 days. Four regions of interest (ROIs) were positioned blindly and similarly in the liver, by two independent readers on DL-CT and MRI images. For DL-CT exams, all imaging phases were included. Fat fraction agreement between CT and MRI was performed using intraclass correlation coefficients (ICC), determination coefficients R2, and Bland-Altman plots. Diagnostic performance was determined using sensitivity, specificity, and positive and negative predictive values. The cutoff for steatosis was 5%.

RESULTS

Correlation between MRI and CT data was excellent for all perfusion phases with ICC calculated at 0.99 for each phase. Determination coefficients R2 were also good for all perfusion phases (about 0.95 for all phases). Performance of DL-CT in the diagnosis of hepatic steatosis was good with sensitivity between 89 and 91% and specificity ranging from 75 to 80%, depending on the perfusion phase. The positive predictive value was ranging from 78 to 93% and the negative predictive value from 82 to 86%.

CONCLUSION

Multi-material decomposition in DL-CT allows quantification of hepatic fat fraction with a good correlation to MRI data.

CLINICAL RELEVANCE STATEMENT

The use of DL-CT allows for detection of hepatic steatosis. This is especially interesting as an opportunistic finding CT performed for other reasons, as early detection can help prevent or slowdown the development of liver metabolic disease.

KEY POINTS

• Hepatic fat fractions provided by the dual-layer CT algorithm is strongly correlated with that measured on MRI. • Dual-layer CT is accurate to detect hepatic steatosis ≥ 5%. • Dual-layer CT allows opportunistic detection of steatosis, on CT scan performed for various indications.

Liver fat volume fraction measurements based on multi-material decomposition algorithm in patients with nonalcoholic fatty liver disease: the influences of blood vessel, location, and iodine contrast

BACKGROUND

In recent years, spectral CT-derived liver fat quantification method named multi-material decomposition (MMD) is playing an increasingly important role as an imaging biomarker of hepatic steatosis. However, there are various measurement ways with various results among different researches, and the impact of measurement methods on the research results is unknown. The aim of this study is to evaluate the reproducibility of liver fat volume fraction (FVF) using MMD algorithm in nonalcoholic fatty liver disease (NAFLD) patients when taking blood vessel, location, and iodine contrast into account during measurement.

METHODS

This retrospective study was approved by the institutional ethics committee, and the requirement for informed consent was waived because of the retrospective nature of the study. 101 patients with NAFLD were enrolled in this study. Participants underwent non-contrast phase (NCP) and two-phase enhanced CT scanning (late arterial phase (LAP) and portal vein phase (PVP)) with spectral mode. Regions of interest (ROIs) were placed at right posterior lobe (RPL), right anterior lobe (RAL) and left lateral lobe (LLL) to obtain FVF values on liver fat images without and with the reference of enhanced CT images. The differences of FVF values measured under different conditions (ROI locations, with/without enhancement reference, NCP and enhanced phases) were compared. Friedman test was used to compare FVF values among three phases for each lobe, while the consistency of FVF values was assessed between each two phases using Bland-Altman analysis.

RESULTS

Significant difference was found between FVF values obtained without and with the reference of enhanced CT images. There was no significant difference about FVF values obtained from NCP images under the reference of enhanced CT images between any two lobes or among three lobes. The FVF value increased after the contrast injection, and there were significant differences in the FVF values among three scanning phases. Poor consistencies of FVF values between each two phases were found in each lobe by Bland-Altman analysis.

CONCLUSION

MMD algorithm quantifying hepatic fat was reproducible among different lobes, while was influenced by blood vessel and iodine contrast.

Spectral CT: Current Liver Applications

Using two different energy levels, dual-energy computed tomography (DECT) allows for material differentiation, improves image quality and iodine conspicuity, and allows researchers the opportunity to determine iodine contrast and radiation dose reduction. Several commercialized platforms with different acquisition techniques are constantly being improved. Furthermore, DECT clinical applications and advantages are continually being reported in a wide range of diseases. We aimed to review the current applications of and challenges in using DECT in the treatment of liver diseases. The greater contrast provided by low-energy reconstructed images and the capability of iodine quantification have been mostly valuable for lesion detection and characterization, accurate staging, treatment response assessment, and thrombi characterization. Material decomposition techniques allow for the non-invasive quantification of fat/iron deposition and fibrosis. Reduced image quality with larger body sizes, cross-vendor and scanner variability, and long reconstruction time are among the limitations of DECT. Promising techniques for improving image quality with lower radiation dose include the deep learning imaging reconstruction method and novel spectral photon-counting computed tomography.

Radiomics nomograms based on R2* mapping and clinical biomarkers for staging of liver fibrosis in patients with chronic hepatitis B: a single-center retrospective study

OBJECTIVES

To investigate the value of R2* mapping-based radiomics nomograms in staging liver fibrosis in patients with chronic hepatitis B.

METHODS

Between January 2020 and December 2020, 151 patients with chronic hepatitis B were randomly divided into training (n = 103) and validation (n = 48) cohorts. From January to February 2021, 58 patients were included in a test cohort. Radiomics features were selected using the interclass correlation coefficient and least absolute shrinkage and selection operator method. Three radiomics nomograms, combining the radiomics score (Radscore) derived from R2* mapping and clinical variables, were used for staging significant and advanced fibrosis, and cirrhosis. Performance of the model was evaluated using the AUC. The utility and clinical benefits were evaluated using the continuous net reclassification index (NRI), integrated discrimination improvement (IDI), and decision curve analysis (DCA).

RESULTS

The Radscore calculated by 12 radiomics features and independent factors (laminin and platelet) of advanced fibrosis were used to construct the radiomics nomograms. In the test cohort, the AUCs of the radiomics nomograms for staging significant fibrosis, advanced fibrosis, and cirrhosis were 0.738 (95% confidence interval [CI]: 0.604-0.872), 0.879 (95% CI: 0.779-0.98), and 0.952 (95% CI: 0.878-1), respectively. NRI, IDI, and DCA confirmed that radiomics nomograms demonstrated varying degrees of clinical benefit and improvement for advanced fibrosis and cirrhosis, but not for significant fibrosis.

CONCLUSIONS

Radiomics nomograms combined with R2* mapping-based Radscore, laminin, and platelet have value in staging advanced fibrosis and cirrhosis but limited value for staging significant fibrosis.

KEY POINTS

• Laminin and platelets were independent predictors of advanced fibrosis. • Radiomics analysis based on R2* mapping was beneficial for evaluating advanced fibrosis and cirrhosis. • It was difficult to distinguish significant fibrosis using a radiomics nomogram, which is possibly due to the complex pathological microenvironment of chronic liver diseases.

CT-Derived Body Composition Assessment as a Prognostic Tool in Oncologic Patients: From Opportunistic Research to Artificial Intelligence-Based Clinical Implementation

CT-based body composition measures are well established in research settings as prognostic markers in oncologic patients. Numerous retrospective studies have shown the role of objective measurements extracted from abdominal CT images of skeletal muscle, abdominal fat, and bone mineral density in providing more accurate assessments of frailty and cancer cachexia in comparison with traditional clinical methods. Quantitative CT-based measurements of liver fat and aortic atherosclerotic calcification have received relatively less attention in cancer care but also provide prognostic information. Patients with cancer routinely undergo serial CT examinations for staging, treatment response, and surveillance, providing the opportunity for quantitative body composition assessment to be performed as part of routine clinical care. The emergence of fully automated artificial intelligence-based segmentation and quantification tools to replace earlier time-consuming manual and semiautomated methods for body composition analysis will allow these opportunistic measures to transition from the research realm to clinical practice. With continued investigation, the measurements may ultimately be applied to achieve more precise risk stratification as a component of personalized oncologic care.

Dual-Energy Computed Tomography in Diffuse Liver Diseases

Dual-energy computed tomography (DECT) is an advancement in the field of CT, where images are acquired at two energies. Materials are identified and quantified based on their attenuation pattern at two different energy beams using various material decomposition algorithms. With its ability to identify and quantify materials such as fat, calcium, iron, and iodine, DECT adds great value to conventional CT and has innumerable applications in body imaging. Continuous technological advances in CT scanner hardware, material decomposition algorithms, and image reconstruction software have led to considerable growth of these applications. Among all organs, the liver is the most widely investigated by DECT, and DECT has shown promising results in most liver applications. In this article, we aim to provide an overview of the role of DECT in the assessment of diffuse liver diseases, mainly the deposition of fat, fibrosis, and iron and review the most relevant literature.